Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

Similar Messages

  • There is a way to use the button enhance for more than one photo at a time?

    I have more than a thousand photos to edit,  this can help a lot.

    This might help:
    http://www.feroxsoft.com/ibe/index.php.en
    Regards
    TD

  • Setting Equalizer for more than one song at a time

    Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
    Thanks,
    Joe The Author

    highlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.

  • Is there a way to delete more than one photo at a time in the Photo application?

    Is there a way to delete more than one photo at a time in the application Photos in the iPad? Thanks.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • How to delete more than one photo at a time

    Apparently there is no longer an iPhoto trash. So you don't drag photos to the trash. Instead you hit the delete key and then a second click on delete when you get the message "Are you sure you want to delete this photo." Has anyone found a way to delete more than one photo at a time, though? This is really a hassle if you have just imported 500 photos and are going to end up deleting 450 of them.

    I didn't say use the command key and delete. I use the command key for selecting random photos. Then I right click and choose delete from the contextual menu.
    I always use right click, but the command-delete does work also in that album.
    Depending on what album you are in, there are different menus. In a user created album, the right click would show "Remove from Album" & "Delete Photo". I noticed that was the same for Last Import Album. But at the same time, under image, you will only have Remove from Album. If it is a system album, you will only get the delete menu from either the right click or from the menu under Image.
    What you have to remember is if it days delete the photo, it will completely delete it from the library and all albums. If the menu says Remove From Album, then it will only be removed from the album you are in.
    In PhotoStream Album, you get only Delete Photo from the right click menu, but under image, you get only remove from album. So if you want to remove an image from PhotoStream, you have to use the top menu so it won't get deleted from the library. If you want to remove a photo completely, you would use delete and it will be removed from the library and photo stream.
    So, there are different processes for the different albums. I don't know if that is intentional or just oversight. That may change in the future.

  • Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time

    Hello all,
    Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
    At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
    (ME61/ME62/ME63)
    Detailed replies with various possibilities would be highly appreciated.
    Thanks & Regards,
    Joy Ghosh

    The vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
    But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
    There you define a job that runs RM06LBAT report.
    You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create.

  • Master_detail for more than one record at a time

    Hi,
    How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
    i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
    Thanks for your help.Bcj

    Thanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
    data in table A,
    username role
    AAA R1
    BBB R2
    CCC R3
    data in table B,
    username profile
    AAA P1
    BBB P2
    CCC P3
    i wanted to display it on form like below,
    username role profile
    AAA R1 P1
    BBB R2 P2
    CCC R3 P3
    Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
    Thanks Again, Bcj

  • How do you delete more than one photo at a time on Iphone 3gs camera roll?

    How do you delete more than one photo at a time on the Iphone 3gs camera roll?

    You can't.

  • Is there a way to "red eye" more than one photo at a time?

    Is there a way to "red eye" more than one photo at a time?

    No. 
    OT

  • How can i order prints of more than one photo at a time?

    Hi I am trying to order prints of more than one photo at a time but can only select one photo - if I press command it just jumps to the next photo, not allowing me to select multiple photos.
    Thanks

    Easiest way is to make an album of the photos you want to order, crop them to the print size, select all and order
    LN

  • How to e-mail more than one photo at a time?

    i am wondering how to e-mail more than one photo at a time from the photo's saved

    With the last iOS update you can add photos while you're typing you email. You just need to touch (as you have to copy/paste something) and the tap add photo. All the time you need.

  • How can I scan more than one photo at a time on my 8610

    The previous HP Scanner we had (8500) would allow you to add scan windows to the scan preview so that you could scan more than one photo or image at a time from the glass.  This allowed me to scan physical photos in several at a time rather than having to load one at a time.  Is there a way to do this in this newer 8610 software?  

    Thanks!  That did work, sort of.   At 600 dpi, If I put 5 photos on the scanner bed, it sometimes senses 3 correctly and senses 2 as one photo.  Sometimes the other way around, it gets 2 right and senses 3 togehter.  I can then change the scanning area to just have one of those photos, but then I have to rescan the one(s) that are/were left out. 
    So the first problem with this solution is, to use it I'm stuck at 300 dpi resolution  or less which isn't great for my situation.  I want to be able to enlarge some of these images up for printing.
    Also, When I click on the + sign it scans the same photos again and I can then crop the ones that it continually senses as 1 photo (even when they are spread apart, but it scans all the others again to, so if it senses three photos together that shouldn't be, I have to add 2 extra pages, crop them appropriately and the delete the extra 4 scans of the photos it got right the first time.  
    VERY CUMBERSOME.  The previous program for the 8500 let you just add a scan area window so that you could scan the bits out you wanted.  Much better.   Why do they mess with what works?   Bummer.

  • Is it possible to email more than one photo at a time with the iPhone? Thanks

    Is it possible to send more than one photo in an email using with the iPhone? Thank you in advance for your help

    Yes.  Open your camera roll in the thumbnail view, tap the arrow button on the top right, tap all of the photos you want included in your email, tap Share at the bottom, tap Email.  Note: all email providers have limits on the size of emails that are permitted so be careful not to try to add too many or it may not be delivered.

  • Creating SQL-Loader script for more than one table at a time

    Hi,
    I am using OMWB 2.0.2.0.0 with Oracle 8.1.7 and Sybase 11.9.
    It looks like I can create SQL-Loader scripts for all the tables
    or for one table at a time. If I want to create SQL-Loader
    scripts for 5-6 tables, I have to either create script for all
    the tables and then delete the unwanted tables or create the
    scripts for one table at a time and then merge them.
    Is there a simple way to create migration scripts for more than
    one but not all tables at a time?
    Thanks,
    Prashant Rane

    No there is no multi-select for creating SQL-Loader scripts.
    You can either create them separately or create them all and
    then discard the one you do not need.

  • I want to order photos on iPhoto. I have logged in one photo, and then my choices are cancel and buy now. How do I order more than one photo at a time?

    I would like to order more than one photo on iPhoto. I have downloaded one picture, and then my choices are cancel and buy now. I would like to download other photos to have them printed, too. How do I do that?

    Wich version of iPhoto do you have? You need iPhoto '09 or '11 to order prints.
    Make an album of all photos you want to order in the same order.
    Then select all photos at once, when you use Share > order prints.
    You should see a panel like this, where you can mark the quantities. The screenshot is from iPhoto 9.6:

Maybe you are looking for

  • Open documents in same window (Adobe Reader 9)

    Dear forum, I would like to set up Adobe Reader 9, that it opens all documents in the same window. This is much easier to handle, when you have multiple documents opened. Does anybody know how to set up Adobe Reader 9 in this manner ? Thanks for your

  • How to pass the value from DB in Approval Policy Rule OIM 11g R2

    Hi, I need to get the value of rule condition in Approval policy from DB. Please let me know how to achieve this. I am using OIM 11g R2. Thanks

  • Intermittant problems with Flash Player 7 and 8

    Good morning, While "stress testing" a recent Captivate 2 generated quiz lesson, one of our testers noticed some odd behavior. (Granted, most students will not do the following actions, but I thought I'd mention it anyway.) First let me add that we u

  • Best practices / preferred usage of SAP standard (delivered) roles

    Dear Experts, When going about designing roles for a new system, what is the preferred usage on SAP standard/delivered roles?  I was thinking of using them as a "base", then tweaking auth objects here and there to make the roles work but the more I w

  • Sérialisation de la Master Collection CS6 sur Mac

    Bonjour,  Nous réalisation des images de nos configurations avec toute la master Collection. Nous sérialisons notre master. Quand l'image est réalisée, nous la mettons à disposition. Nous effectuons des descentes de cette image, lors de l'ouverture d