Setting color table of intensity graph

Hi!
I set the attribute color table of an intensity graph to a rainbow
distribution of the colors, but now I'm not able to change the color
table with the markers in the front panel.
Do you know a solution?
Thanks, Markus

> I set the attribute color table of an intensity graph to a rainbow
> distribution of the colors, but now I'm not able to change the color
> table with the markers in the front panel.
> Do you know a solution?
>
Intensity graphs have two different modes for its color definition.
The first, typical one, is the Color array. It can be set using
either attributes or interactively and lets you define number/color
pairs that create either a smoothly interpolated or a banded color
gradient. The second mode is the color table. This is useful for
bitmaps or for cases where the color table has been custom generated
on the diagram. When using the color table, the Z scale is still
useful for determining which numbers map to the 0-255 range of the
color table. If you set the
Z scale to autoScale, it will find the
min and max of the data and set the Z to show all data mapped through
the color table. If set smaller, some of the values will map to the
first and last out of range colors. If set larger, it will map the
values to a smaller and smaller number of the colors in the color
table.
It sounds like you really want to be using the color array and not
the color table. The intensity graph automatically switches for
you when you write attributes to it, but there is a way to change
it back the the color array using a popup or attribute.
Greg McKaskle

Similar Messages

Changing color table for intensity graphs

Hi, I've been working on superimposing intensity graphs and I'm almost getting it, I'm just having trouble with color table, it is suppose to be composed of a 1-D array of 256 colors
I have 2 intensity graphs each with a different color table (256 color - 256 locations in the color table array). I need to "squeeze" both color table into a third color table for the superimposing of the 2 intensity graphs. therefore I figure I would take every other color value from each of the first 2 color tables (so each color table shrinks to 128 color) and add the values to form a 3rd color table so that the bottom will correspond to the first color table and the top will correspond to the 2nd color table.
I can do this manually, but it takes WAY too long, so I've been trying to use some kinda of algorism, but I cannot succeed. Anyone have any suggestions? it seems that color table is an unusual kinda of array
My attempted program is attached.
thanks very much!!
Attachments:
superimposing3.vi ‏111 KB

Brian,
I think this is what you're after (attached). The easiest thing to do is to decimate, then concatenate your original color tables to form your new "squeezed" color table. However, keep in mind that you also have to squeeze, or remap, your underlying data values to correspond with either one half of the color table or the other.
See if what I did makes sense.
Regards,
John
Attachments:
superimposing3_MOD.vi ‏90 KB

BCG Brightness Contrast Gamma - Looking for BCG function returning color table / lookup table coded in pure G and applicable to Intensity Graph or Picture Control

Looking for BCG function returning color table / lookup table coded in
pure G and applicable to 8-bit Intensity Graph or Picture Control. Do
not want to use IMAQ Vision is this particular application. Any
help is appreciated.
Sincerely,
Don

Take a look at this color model software I put together. (Don't concern yourself much with the basic programming at this point.). The color component generator subVI is borrowed from a LabVIEW example.
First look at test_color2.vi. If you adjust the sliders of the various controls, you will see how it works. You can see that for pure B&W images, brightness, contrast, and gamma (which I think I have coded correctly) are all fairly straightforward to modify.
Now look at test_color3.vi. Here we try to adjust BCG for color images using the color model shown here where current color component clusters are carried into the BCG event cases via shift registers. You can see that once color is introduced into the image, it becomes difficult to mix the colorizing with the BCG model. And this is pretty much where I am right now.
Would be interested in comments / suggestions.
Sincerely,
Don
Attachments:
test_color2.llb ‏2251 KB

Change colors of individual pixels on intensity graph?

I would like to be able to change the color of a set of individual pixels within an intensity graph, to blue for example, while leaving the color table otherwise as is, for example, gray scale. The change to blue would be based on location, not on current gray value. I think I can accomplish this using the mask fx with picture controls, and then convert to intensity graph. Is there a more direct way? A good example to demonstrate this capability would be just using a 'mouse down' event on an intensity graph to change the color at the mouse location. Any thoughts are appreciated.
Sincerely,
Don

Yes, seems to work fine .
If you have LabVIEW 8.0, there is another possibility. There is a new property that allows drawing any pictures or picture elements on your graph area. Of course you could draw individual pixels, but nothing prevents you from e.g. drawing circles, squares, odd shaped areas, arrows or event text. ... Anything you could do with a plain picture indicator. One example that ships with LabVIEW 8.0 is Envelope.vi, see image.
Message Edited by altenbach on 06-12-2006 07:31 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
envelope.png ‏32 KB

Add a simple setting to Intensity Graph that draws grid on top of data

It would be extremely useful to break up the Intensity Graph data into cells to easily see "coordinates". At the moment you have to follow coordinates with your finger or a pen.
I was given this solution but it is surely an overkill for what should be a simple setting.
http://forums.ni.com/t5/Measurement-Studio-for-NET/WPF-Intensity-Graph-gridlines-not-visible-on-plotted-data/td-p/3168193

Siddhesh,
You could define buttons / controls ... called 'next comp code' and 'prev comp code', and then in the events for these controls you could re-populate the alv data table with the data for each company code each time a button is pressed.
Hope this helps ...
Duane

Fade colors of intensity graph

Hi everyone,
I've made a program where I read an 2D-array and plot this array in a intensity graph.
I was wondering if the colors in the graph can fade in each other, preferably in vertical position (columns). The idea is that the numeric data becomes visualized like a DNA profile.
I've added a image of the plotted graph.
Thanks.
Solved!
Go to Solution.
Attachments:
Intensity graph plot major.PNG ‏48 KB
Intensity graph plot minor.PNG ‏35 KB

Without manipulating the array, no it's not possible. I made an idea on the Idea exchange to fix this, I recommend you vote for it. Anti-Alias or Smooth Intensity Plot
Like the idea says, see this post for workarounds.
Tim Elsey
LabVIEW 2010, 2012
Certified LabVIEW Architect

Set color for TableCellDesign for a table in readmode.

My Requirement is dynamic assiging the Tabcelldesgin color for table column, but Table in readonly = false.
is there any possiblity of assigining the values dunamically.
Thanks in advance

Yes, i have assigned to Table column to set color dynamically for different conditions.
But color is visible, when table in read mode.
My requirement is need to set color, when table in readonly = false.
Please can any one have the solution for this>

Setting intensity graph to blinking causes LV2012 to crash

Hi,
This VI crashes when setting blinking to TRUE, using LV2012, Win7 32 bit. I saw that this was a bug in 2004 , hasn't it been fixed yet? Or am I missing something obvious?
Thanks,
Danielle
"Wisdom comes from experience. Experience is often a result of lack of wisdom.”
― Terry Pratchett
Solved!
Go to Solution.
Attachments:
testBlinking.vi ‏16 KB

Yup, still broken LV2013SP1.
I'm not making any excuses for non-action, but I would image that blinking an intensity graph isn't something they get a lot of complaints about...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Creating intensity graph from ywo sets of data?

Hi,
In my vi, I am getting two data set dependent on each other, i.e. amplitude(y) versus position(x). The data acquisition of x-y data happens in a for loop. This data is transferred outside the loop with index enabled. Outside the loop I want to plot an intensity graph out of these data, while z=amplitude, x=position,y=not important, say index. I don't want simply to transfer the amplitude data outside the loop and connect the 2D array of amplitude to the intensity graph. I want to preserve the position information in the intensity graph. How can I do this?
Thanks

Here is a link to a posting that may have been yours also. Just some ideas I had. I hope it can help you get started somewhere.
J.R. Allen

How to set colors to table control?

Hi all,
can we set colors to tables columns and rows?? How can we acieve this? Any help please
Thanks,
Madhan.

Hi All
thanks for your replies..
data tab type IF_main_view=>Elements_segment.
data line type IF_main_view=>Element_segment.
data node_info type ref to if_wd_context_node_info.
data attribute_info type wdr_context_attribute_info.
data attr_value type WDR_CONTEXT_ATTR_VALUE.
data wd_standard_cell type ref to cl_wd_table_standard_cell.
data component like line of cl_abap_structdescr=>components.
data wd_table_column type ref to cl_wd_table_column.
node_info = lo_nd_segment->get_node_info( ).
attribute_info = node_info->get_attribute( 'CELL_DESIGN' ).
if component-name = 'SEGMENT'.
wd_standard_cell->set_cell_design( CL_WD_ABSTR_MASTER_TABLE_COL=>E_CELL_DESIGN-BADVALUE_MEDIUM ).
endif.
i am trying to set color for some colomns, but i am not getting any colors??? anything wrong in this.. please help
thanks,
Madhan.

Getting error while setting color to table rows?

Hi All
I am trying to setting colors to table rows based on dropdown value.
lv_Dropdown vaue =1 i want to set one color, 2-another color like that.
For this I create attribute CELL_DESIGN of type WDUI_TABLE_CELL_DESIGN in node, and i bind this attribute to every column celldesign property in table. and my code in on select of dropdown.
data lr_column type ref to cl_wd_table_column.
data:obj_table type ref to cl_wd_table.
lr_column = obj_table->get_column( id = 'TABLE_WEEK1' ).
if lv_dropdown = 1.
   lr_column->set_cell_design(
cl_wd_table_column=>e_cell_design-badvalue_dark ).
endif.
lr_column->bind_cell_design( path = 'SEGMENT1.CELL_DESIGN' ). ...Giving dump at r_colum = get_column( )
I follow correct code or not??
Cheers,
Venkys.

Sorry Sarbjeet and baskaran i am not getting,
I want to set colors to row of a table on dropdown selection. In dropdown i ahve a code like
DATA lo_nd_segment1 TYPE REF TO if_wd_context_node.
DATA lo_el_segment1 TYPE REF TO if_wd_context_element.
DATA ls_segment1 TYPE wd_this->Element_segment1.
data lt_segment1 type wd_this->elements_segment1.
DATA lv_segment TYPE wd_this->Element_segment1-segment.
navigate from <CONTEXT> to <SEGMENT1> via lead selection
lo_nd_segment1 = wd_context->get_child_node( name = wd_this->wdctx_segment1 ).
get element via lead selection
lo_el_segment1 = lo_nd_segment1->get_element( ).
lo_el_segment1 = WDEVENT->GET_CONTEXT_ELEMENT( 'CONTEXT_ELEMENT' ).
get all declared attributes
lo_el_segment1->get_static_attributes(
    IMPORTING
      static_attributes = ls_segment1 ).
DATA : lv_dropdown type string .
lv_dropdown = ls_segment1-segment.
if lv_dropdown = 1. SET ONE COLOR TO THAT ROW
endif.
if lv_dropdown = 2. SET ONE COLOR TO THAT ROW
endif.
Now what should be the code in WDMODIFYVIEW method to set table row with colors.
Cheers,
Venkys.

Intensity graph and its "interpolate color" option

Dear Devs,
using LV2013.02f, my intensity graph never redraws correctly (it remains black), after I uncheck and check the "interpolate color" option in the right-click menu for the z-axis. Is this reproducible for anybody, please?
Note: There are more situations when the intensity graph remains black after changing some options, but I could not reproduce them systematically. Any ideas what to use instead of it to display 2D arrays of values?
Cheers,

Dear users,
dear GerdW
Related issue:
Intensity graph displays a black z-axis color bar
The issue(s) are connected to the positions of the markers on the color bar. I converted the VI to a 2010version (again, wrapped in a 7-Zip archive), I hope that helps for now.
Now, when I multiply my 2D array with a suitable high- and at the same time low-enough value (multiplier=1E+34) -- 1E+33 is too low, 1E+35 is already too high; then the markers of the color bar are visible suddenly. The "interpolate color" and the blackness of the graph can be now manipulated and adjusted.
So now, I have to remember that the default markers' positions are (0,50,100) and there is no way to change them before I extend the values of my array over this region suitably. Seriously, I went through all the right-click on the z-axis menu items and executed them one-by-one. None of those brought the z-axis color bar or the colors back into the graph again.
Q: How should a novice know about it? Isn't there a "reset all markers, distribute them equally and show all values in the default spectrum color" button somewhere, and did I missed it?!
Cheers,
Attachments:
2013-11-27 0946 buggy intensity graph.7z ‏133 KB

Programmatically disabling/enabling cursor in intensity graph

Hello all,
I am building a LV interface (LV2011) for a stepper XY stage. The system "scans" a surface, displaying it on the graph. I set up to cursors to zoom into a region of interest (ROI). Pressing a button resizes the scales to the ROI (zooming in on the area). Sections of code move the XY stage, and read a device. When done I want to zoom into a ROI and use a THIRD cursor to manually move the XY stage. I have this working with TWO graphs, based on the "region of interest.vi" I found in the dev zone.
What I would like to do is have a boolean toggle controlling ONE GRAPH between setting min/max (cursors 0 and 1) and manual stepper position (cursor 2). If cursor 2 is visible I want cursors 0 & 1 not showing and visa versa. Can I do this?
I attached the example - bascially what I did was add a cursor to the 2nd graph, grabbing the XY vales and sending to the stepper controllers. Works great! I am trying to "combine the two" by resizing the orig graph with a button click (works fine) and then click another button to show the XY stage cursor (and hiding the min/max cursors) - thats the brick wall
On a seond note - controlling a XY stage using the intensity graph's cursor is really nice; however it would be great if I can control the cursor similar to a slider's "coerce" - has anyone done this? I assume I have to write a routine in the event that performs some modulo function. Just curious!
Thanks,
Steve
Solved!
Go to Solution.
Attachments:
roi.llb ‏40 KB

Your exmaple works perfect. Howver I am having probs with Val(sngl) on the XY graph. On the example you gave, lets say I move the cursor with the mouse - event fires, everyone is happy. If I move the cursor with CODE - nada. I even read the "Value" of the graph and wrote it to "Val(sngl)" to try to fire the event. How does one force a trigger on an XY chart when you move a cursor (say cursor idx2) using code?
Better yet - why when I read the Val and write to Val(sngl) does the event not fire??? I have been searching for a basic XY table with sensor -type project but havent found one yet. Everyting works great - draginng the cursor moves the XY stage. Now I need to do the auto-scan part Use code to place the cursor - trigger the even that moves the stage.
Thanks
Steve
Attachments:
XY_Stage_Rev8.vi ‏53 KB

Cursor/Window for Zooming in Intensity Graph

Does anybody know how to create a non-rectangular window (any shape
connected by mouse clicks) for zooming (or for data retrieval) if a
particular area in the graph is of interest in a intensity graph?
Wouldn't it be really cool if we can select edges in a graph and
retrieve the information (or data) from the graph?
The other question of mine is: is there a way that when we're using
intensity graphs, we can create the custom menu with right mouse button
click, instead of the standard set of menu items? Any help is greatly
appreciated. Thanks.
Sent via Deja.com http://www.deja.com/
Before you buy.

[email protected] wrote:
> Does anybody know how to create a non-rectangular window (any shape
> connected by mouse clicks) for zooming (or for data retrieval) if a
> particular area in the graph is of interest in a intensity graph?
> Wouldn't it be really cool if we can select edges in a graph and
> retrieve the information (or data) from the graph?
In my pre-NI days, I had a lot of fun trying to coax image-manipulation and
-analysis behavior out of LabVIEW intensity graphs. You can do a fair
amount by making use of cursors and hotkeys and creating pseudo-overlays by
setting image coordinates to certain colors to create visual cues in
response to user inputs.
That being said, I never considered trying to get complex ROI (region of
interest) info from a user wi
th an intensity graph, and I'll bet it's a
pretty tough GUI trick unless you're using IMAQ Vision. If you find
yourself trying to build features like this into your application, or doing
a lot of image manipulation in general, you might save yourself time in the
long run by getting the IMAQ Vision toolkit from NI.
> The other question of mine is: is there a way that when we're using
> intensity graphs, we can create the custom menu with right mouse button
> click, instead of the standard set of menu items? Any help is greatly
> appreciated. Thanks.
I'm not aware of a way to suppress the built-in context-sensitive popup
menus. Sorry!
Regards,
John Lum
National Instruments

MATLAB pcolor and LABVIEW Intensity Graph

Hello all
I have a data matrix which i want to plot using intensity graph of LABVIEW. My problem is that when i plot this matrix using MATLAB pcolor along with "shading interp" command, i got a very fine and smooth coloring graph of this matrix, however, using LABVIEW Intensity graph along with getcolor vi, i was not able to get a smooth coloring graph comparable to MATLAB pcolor. I have tried many setting but results were not satisfactory
Is this due to a limitation of LABVIEW intensity graph or i am missing something? Kindly help me
Best Regards
Asim

Thanks for providing that Asim, unfortunately the VI you provided is unusable as-is. There is a subVI missing, and while not critical, it's difficult to tell how you're setting up the intensity graph without that VI. Additionally, it doesn't appear that there is any graph data included in the VI you provided and a third-party software license would be required to use this VI. Could you upload the data you're handling in a format that works without any external tools?
As for thoughts on the differences in the plots; they are largely similar in appearance, although it does appear that you're using a different color scale in LabVIEW- the majority of your scale is in the blue-green range, rather than continuing linearly through yellow, orange, and red. You're going to lose a lot of visual resolution in the ranges you're highlighting due to this. The plot you're trying to achieve also appears to be interpolated or blurred around the edges of bins, are you actually plotting data between integers on the x-axis, or is this an artefact introduced by the software?
Regards,
Tom L.

Setting color table of intensity graph

Similar Messages

Maybe you are looking for