Setting Default Bluetooth Volume

I have a Storm 9550 from Verizon with Version 5.0.0.607 software and use a Jawbone 2 bluetooth. Whenever the bluetooth is disconnected from the 9550, upon reconnection the volume is at the lowest possible level. There was a setting I used previous that allow me to set the default bluetooth volume at the maximum level. I cannot find that setting any longer, or the new software does not allow that option. What can I do to increase the default volume on my bluetooth?

"Same issue" thinking is with the devices and OS not the same.
One fix for one device with one OS will not necessarily be the same fix.
Please in the future open a thread specific to your issue instead of adding to a previous thread unless all the specifics are in fact the same (Device and OS)
Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
If there is a Theme on my Blackberry, Hedone it!
If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
If your issue has been solved, please mark the post that solved it for you!

Similar Messages

Iphone 4s bluetooth volume problems through Alpine HU

Having trawled through numerous reports of bluetooth problems with the 4S I have not found one which replicates my issue although I could have missed it.
Essentially I think my query boils down to " Does the 3GS output music, via bluetooth at a higher level than the 4S, assuming both using IOS5.0.1" .Because my new iphone 4S is much much quieter than my old 3gs and I want to establish whether this is a software problem or a faulty unit.
For the last couple of years I have been using a 3GS which paired perfectly with my Alpine CDA-9887/Bt400 stereo in the car, handled calls well and when playing music via the bluetooth input ( which it did exceptionally well) it was at the same sound level as the other inputs for a given vol setting, i.e. I could switch from radio, to disc to bluetooth withouth changing the volume.
Having just changed to an iphone 4S I have found that although the unit pairs ok and seems to handle calls well enough (although rather mushy sounding compared to 3GS) it is very quiet when using the ipod function via bluetooth.
Volume and sound quality are very subjective I realise but to give an indication of the problem, the Alpine head unit has a volume scale from 0-39. On all inputs (except with the 4S) a volume of 5 is fine for spoken voice, 12 good for music on the move 21 is very very loud pushing the cars speakers to the limit. These levels are approx the same when playing music through an iphone 3GS and an ipod touch via bluetooth.
By contrast the iphone 4S is inaudible at vol 5, needs 20 to be listenable to on the move and even at vol 39 sounds thin and about as load as a 3GS at vol18 so ful vol not possible from my iphone 4S
The main problem with this is that if you are listening to music from the iphone 4S then switch to the radio without remembering to drastically reduce volume it is likely to result in damage to the speakers and/or your eardrums. The problem is compounded as I use the TomTom app regularly and this exibits the same problem, the volume needs to be very high for instructions and then if I change input to listen to the news....ouch.
I have tried 2 iphone 3GS's and an ipod touch on this Alpine unit and they all work perfectly, being able to maintain the same output for a given HU vol level as the radio etc. I have tried increasing the bluetooth volume on the 4S handset, have tried clean restore to see if there is some obscure problem with my backup all to no avail.
Has anyone upgraded from a 3GS to a 4S and found the music level in a car via bluetooth much quieter, the same or louder and does this sound like a hardware problem.
thanks.

Funny Apple told me to eat **** and call my car place.
HELP !!!
It’s not like we are working with Samsun here. They should have thought it out fixed all the bugs then went ahead. I am...... ******! My 3 week old Volkswagen Tiguan no longer plays my MUSIC nor my Audible. Its so not ok. This is a breach of contract. I am told by apple you don’t have to update but my carrier said just the opposite our phones will not work without the updates...
Apple get you crap together, I had such respect you. You have let a lot of apple fans down.
A very ****** ex Apple Fan

Setting Default Views of Mounted Server Shares

In OS X 10.5 server, how do I change the owner of a volume? So I can do the stuff below? Do I change the owner in the Finder...? Or do you use the OS X Server admin utility type programs?
Thanks
Re: Setting Default Views of Mounted Server Shares
Posted: Dec 18, 2007 9:49 AM in response to: William Read
Solved
Have you tried this?
http://docs.info.apple.com/article.html?artnum=107482
You can set custom view options (window size, icon placement, and so forth) that clients see when they connect to a server volume via Apple File Service (AFP).
You can customize the size, position, and other view options of the window that clients see when they connect to a server volume via Apple File Service (AFP). You can do this on a per-volume basis.
To customize view options, follow these steps:
1. Log in to a client computer.
2. Using Connect to Server, connect to the target volume as the owner of the volume; the owner must not be an administrator account (see Notes 1, 2, and 3, below).
3. Make any desired changes to the window position, view mode (Icons, List, Columns), icon arrangement, or any of the settings found in View Options window (Command-J).
4. Disconnect from the server volume by dragging it to the Trash.

In OS X 10.5 server, how do I change the owner of a volume? So I can do the stuff below? Do I change the owner in the Finder...? Or do you use the OS X Server admin utility type programs?
Thanks
Re: Setting Default Views of Mounted Server Shares
Posted: Dec 18, 2007 9:49 AM in response to: William Read
Solved
Have you tried this?
http://docs.info.apple.com/article.html?artnum=107482
You can set custom view options (window size, icon placement, and so forth) that clients see when they connect to a server volume via Apple File Service (AFP).
You can customize the size, position, and other view options of the window that clients see when they connect to a server volume via Apple File Service (AFP). You can do this on a per-volume basis.
To customize view options, follow these steps:
1. Log in to a client computer.
2. Using Connect to Server, connect to the target volume as the owner of the volume; the owner must not be an administrator account (see Notes 1, 2, and 3, below).
3. Make any desired changes to the window position, view mode (Icons, List, Columns), icon arrangement, or any of the settings found in View Options window (Command-J).
4. Disconnect from the server volume by dragging it to the Trash.

IPod Shuffle: How to set the maximum volume limit

How do I get back to the volume default I set at the onset of using my shuffle?
I have speakers in my Ski Helmet and would now like to turn up the volume louder than I have currently set for my in ear earpods.
Any help is appreciated.
b

If you're talking about the Maximium Volume Limit:
Setting the Maximum Volume Limit
You can set a limit for the maximum volume on iPod shuffle. You can also set a
password in iTunes to prevent this setting from being changed by someone else.
If you’ve set a volume limit on iPod shuffle, the status light blinks orange three times if
you try to increase the volume beyond the limit.
To set the maximum volume limit for iPod shuffle:
1 Set iPod shuffle to the desired maximum volume.
2 Connect iPod shuffle to your computer.
3 In iTunes, select iPod shuffle in the Source pane.
4 Click the Settings tab.
5 Select “Limit maximum volume.”
6 Drag the slider to the desired maximum volume.
The initial slider setting shows the volume the iPod shuffle was set to when you
selected the “Limit maximum volume” checkbox.
7 To require a password to change this setting, click the lock and enter a password.
If you set a password, you must enter it before you can change or remove the
maximum volume limit.
Note: The volume level may vary if you use different earphones or headphones.
To remove the maximum volume limit:
1 Connect iPod shuffle to your computer.
2 In iTunes, select iPod shuffle in the Source pane.
3 Click the Settings tab.
4 Deselect “Limit maximum volume.”
Enter the password, if required.
Note: If you forget the password, you can restore iPod shuffle. See “Updating and
Restoring iPod shuffle Software” on page 26 for more information.

Can i alter the default start volume of Ipod shuffle?

I would love the ipod shuffles i am using in a show to have a higher (maximum) starting volume. The default starting volume is pretty low.
is this possible?
I have seen various things online that make me think it is possible on a windows machine - but i am on a macbook air.
any ideas?

Yeah - I tried that - it didnt really help.
you can alter the volume on windows machines by doing the following (i think) -
"On your shuffle there is a file called
<driveletter>:\iPod_Control\Device\ExtendedSysInfoXml
open the file with notepad or a text editor search for a string:
MinVolumeLevel set the integer number to 16... that should do the trick"
is there not a wayof doing that on a mac?

Set defaults for contacts

HI,
Can anyone tell me how to set the defaults for the contacts. Right now when I save a number in the contacts it is automatically set as a "work" number. I want it to automatically be a mobile number. This will save a lot of cut and pasting. Thanks.

20-Oct-2008 12:07 AM
orgazmic wrote:
Generally pleased with my new N96 which replaces my ageing N95 but i have noticed two bugs. I am using a simfree, nokia shop purchased N96 update to SW v11.101.098.1.
BUG 1: I've imported my contacts from my N95 and i cannot set defaults for email addresses or numbers. When the defaults option is selected from the menu in contacts the conacts application immediatley closes and i am returned to the front screen. Defaults for contacts i've created on the N96 can have there defaults set but defaults cannot be set for contacts imported using PC Suite or the phones sync utility. Also, for imported contacts the ringtone is the default nokia tune and not the tone defined in the contact or in my active profile. Again only imported contacts show this glitch with a contact created on the N96 working as expected. The default ringtone issue seems to be a common one on the forum maybe this is a connection.
BUG 2: The phone freezes if you try to resume playback of a video file whilst using a bluetooth headset (in my case a nokia BH-500). With the phone connected to the BH-500 you can play a video file from the start but when promted to continue the latest played file from last position its 'take the battery out time' when the phone locks up.
Any user got any thoughts on these anomolies??
Message Edited by orgazmic on 20-Oct-2008 12:13 AM
Hello, i have the 11.101 version and I imported all my contacts via PC suite and I CAN use the defaults option and the ringtone can be anything I want (apart for video ringtones-they don't work).
N95,N81,N96, N97

Bluetooth volume jumps to 100% - Z3 + 5.0.2

Very odd problem - I have a Bluetooth receiver (Headset+A2DP profiles) in my car which works best with the Bluetooth volume set at ~50-60%. Sometimes my Z3 will remember the previous setting (and I've tried to force it with smart connect) but often, and every time when i fire google now, it will jump back up to 100%.
I can't find anywhere in the setting to lock the bluetooth volume (either for this particular device, or overall) and restarts and clearing the audio settings cache haven't had any effect. If anyone has come across simiar, and hopefully solved it, I'd appreciate some advice.

Unfortunately changing the Google Now settings had no effect. I tracked this app down which lets you set the Bluetoth volume separately and it now seems to be stable - https://play.google.com/store/apps/details?id=com.nightshadelabs.bluetoothvolume so hopefully this might help someone else if they have a similar issue.

Set "audio record volume" (not amplitude)

I can only use protools with a ipod attached as the "record volume" (destination for session files). any other powerbook uses it's own hard drive for this, but not mine. I've reinstalled pt7. no change
once I came on to a page where you could set up audio volumes, and I can;t seem to get back to it.
thanks anyone!

Let me answer my own question. Its a protools thing-not a mac thing, like I thought. so if anyone cares- in protools7, menu bar/window-scroll to "workspace", and select what your different drives can do, either record or playback. I don't know why pt has the default as playback only.

Midi/browser playback problem with Audigy 2 platinum (Cannot set Default Device for some reas

Currently I'm having problems playing back mid files in Mediaplayer and various other default programs. I can play midifiles in Winamp by setting it to the proper Directsound device. However in control panel/sound setup (MIDI music Playback), It only lists the MIDI Out Devices instead of the playback one and is defaulted on BLANK when I enter it. I have a feeling this is the main problem.
DX Diag plays back the midi fine. I have tried reinstalling the latest drivers and the drivers from the disc with no luck at all. Also the default language has been stuck on Japanese as well. I have no idea why it started doing this but it seems to also affect any sound playback in my web browsers since I don't even get sound from any Flash files or Google video.Message Edited by zoglog on 06-23-2006 :38 PMMessage Edited by zoglog on 06-23-2006 :38 PM

Ok, well I did a clean sweep and clean reinstall of the drivers that fixed my language problem. However I cannot get the proper "Midi music playback" Default Device. Whenever I change it to something it reverts it to a blank no matter how many times I change it or uncheck "Use only default devices"
It does the exact same thing for "Voice playback"
I'm not sure if this is related but I don't get any sound from any web-browser Shockwave flash files.
This is really starting to get fustrating. Any help input would be greatly appreciated. I think the worst part about this is I know the midi works, it just won't let me assign the device....
Oh yeah, also even if I set the "place volume icon in taskbar" option in the sound and devices properties it wll not show. Not sure if this is related...Message Edited by zoglog on 06-23-2006 :44 PM

Set Default Value of Multi-select list item

I have a multi-select list item I want to default the value of to '%' (which is really '%null%') and have it selected. I tried setting default value of item, but it doesn't take '%null%'. I also tried a computation with a static of
:P507_ITEM := '%null%'; How do you get the default value set and selected?

Hi
Shijesh is right, you need to change your null return value and use that return value as your default. Try and use something of the same datatype as your real return values if you plan to use '%' to display all as it will make your queries simpler. eg.
Company A returns 1
Company B return 2
% returns 0
Then your query would be...
SELECT ...
FROM ...
WHERE company_id = DECODE(:P_COMPANY,1,1,2,2,0,company_id)
Hope this makes sense.
Cheers
Ben

Have to "Set up Bluetooth Device" for wireless trackpad and keyboard almost every day

Almost every day when I turn on my MacBook Air in my home office, my Apple wireless keyboard and trackpad do not automatically reconnect. They used to connect just fine when I was in the viscinity, but now (for the past 6 months or so) I almost always have to:
Bluetooth > Set up Bluetooth Device
Turn off the keyboard (hold down the power button for several seconds)
Turn the keyboard back on (hold down power button for several seconds)
Go through the setup wizard
Repeat for the trackpad
Things that don't work:
Pressing the button on each Bluetooth device
Restarting each Bluetooth device
Turning Bluetooth on and off
Setting the Bluetooth devices as "Favorites"
Selecting the device from the Bluetooth menu item and clicking "Connect"
Rebooting my MacBook Air
Resetting the NVRAM / PRAM
Once the device is connected for the day, I do appear to be able to "Disconnect" and then "Connect" again from the Bluetooth menu item. The devices will also automatically reconnect by pressing a button on them. It just appears to lose the "lease" on them or whatever after a little less than a day.
I'm trying to think of other troubleshooting steps I could take and it just occurred to me that I could try swapping them with the peripherals I use at work (which are possibly newer models, but otherwise identical). Any other suggestions?

Huzzah! Less than 1 week after finally getting fed up and posting this question, I have discovered the root cause - my wife had been inadvertently stealing my keyboard and mouse connection whenever she turned on her laptop! She's using my hand-me-down MacBook Pro which I thought I had reset, but apparently it remembered its Bluetooth connections.
I had suspected something similar since I occasionally used the wireless keyboard with my iPad, but had already ruled that out.
I can't believe I figured this out after 6 months of mild frustration, but just days after posting this question

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set default value to input field

Hi Experts,
I need to set default value to one input field for the transaction crmd_order as a screen variant. Guide me in doing that.
Regards,
Harish

Using the transaction SHD0, you can define the screen variant. While defining the sceen variant, you are allowed to define the default values.
Using screen variant, for the main transactoin, you can also define the transaction variant and you can use this as an independent transaction.

Is there any way to set default column widths in the Finder's Column view

When my Finder windows open in column view, all the columns are always VERY wide. I have to then spend time resizing them to a managable width. Is there any way to set default column widths in the Finder's Column view?
<Re-Titled By Host>

No, because you can't set a columns view default.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Setting Default Bluetooth Volume

Similar Messages

Maybe you are looking for