Setting Default Guides

I'm using Illustrator CS3. I would like my default settings to include, rulers always being visible when I open a new document, and guides never being locked, (unless I specifically lock them. There is nothing in the defaults settings for the program that allows me to change this specific designations and when I open the program without a document being open, I don't have access to these particular options, they are grayed out. Is there anyway to make this change?

That won't work for AI 13 (CS3) nor AI 14 (CS4), Jacob.
http://kb2.adobe.com/cps/400/kb400732.html
Although ruler toggle state could always be specified for the default startup document/profile, I am not certain about the guides locked/unlocked state. That is because the guide lock state (unlike rulers) is not a per document setting... at least through AI 12. (If you have five documents open and you unlock guides, they'll be unlocked across all five documents. The state in which you saved the document is immaterial.) Guide lock state, moreover, is a transitory thing. Example: Hide your guides and they'll get locked, requiring manual unlocking.

Similar Messages

HT202612 Guided Access - set default settings?

I want to set my default Guided Access settings so that every time I turn it on, my volume and sleep/wake buttons are enabled. Is there a way to do this? Right now, I have to RE-set those specific settings every day for my next group of students.

Posix permissions have three entities that permissions are granted for, owner, group, and others.
On those three entities, you can have read, write, and execute permissions. The Mac OS X GUI calls others everyone. Take a look at [this article|http://support.apple.com/kb/ht2963]
Staff is the default group a user is placed into.
Others can read your home folder so that they can read the Sites folder and the Public folder. All the other folders should only have read privileges for the owner (you). When you create a file/folder, it inherits the permissions of the enclosing folder. So, if you create a new folder inside your home folder, it will automatically have read permissions for others. If you create a folder inside one of the default folders in home, it will only be readable by you.
You can change the permissions on those folders you create right inside the home folder so that others cannot read them.

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default value to input field

Hi Experts,
I need to set default value to one input field for the transaction crmd_order as a screen variant. Guide me in doing that.
Regards,
Harish

Using the transaction SHD0, you can define the screen variant. While defining the sceen variant, you are allowed to define the default values.
Using screen variant, for the main transactoin, you can also define the transaction variant and you can use this as an independent transaction.

Dump in user exist CC01 to set default value to valid from date

Dear friends,
Task is to set default value to valid from date field in Transaction "CC01".
In INCLUDE ZXCCAU01 of Function 'EXIT_SAPMC29C_001' in Enhancement 'PCCD0001' I written the code like this
DATA var LIKE sy-datum.
var = var + 1.
which is not related to program by creating project and activated the project.
When I run cc01 it is giving dump.
Error is :
Program "SAPLXCCA" tried to use screen 1000.
The screen does not exist.
Can some one guide me What is the problem and How to resolve this.
If not, Is there any other method this can be done.
Regards,
Venkat

Hi venkat,
DATA var LIKE sy-datum.
var = var + 1.
the code u written i guess not ok.The code used by kishan is correct. i.e
DATA var LIKE sy-datum.
sy-datum = sy-datum + 1.
var = sy-datum.
write var.
use the above code.
SAPLXCCA is a functionpool not a program.please check the same.
regards,
Nagaraj

Setting default preferences (CS3)

Hi, I seem to be losing my preferences a lot recently, when I have a crash, and it's becoming quite tedious fixing them manually.
I've managed to successfully java script a few things to work on startup. However there are a few things I don't know the code for:
1. Uncheck "Dimensions include stroke weight"
2. Uncheck "Adjust stroke weight when scaling"
3. Printer prefs > Graphics > images > send data "all" (Needs to be for the application default printer preferences, NOT the current document preferences)
Is there a list available that covers all these things? Can't seem to find them in the Adobe scripting reference or guide.
Cheers

First thing to do is grasp the difference between name of an object and name of a property
"TransformPreference" is the name of an object -- a 'type', just as "Number" is, and "String", and lots of Others. As sort of convention, these are written with an initial capital. You cannot assign a value to an object; you need a variable of that type instead. And an object, in turn, may contain new variables (its 'properties').
So, if I say that an Application contains an object TransformPreference that has a property adjustStrokeWeightWhenScaling, you cannot literally copy-and-paste everything together. Besides, you really have to check case usage. Javascript is Case Sensitive!
"app" is the name of the Application object we are working with (you got that right)
the transform preference object is called 'transformPreferences'
and that, in turn, has a boolean 'dimensionsIncludeStrokeWeight' (note case)
So a full assignment line would be
app.transformPreferences.dimensionsIncludeStrokeWeight = false;
or, in the alternative notation
with(app.transformPreferences) {
dimensionsIncludeStrokeWeight = false;
adjustStrokeWeightWhenScaling = false;
(which reminds me, where did you ever get "ScaleStrokes" from?)
The Print Preference thingy is something different. The "application" doesn't have any print preferences you can set! Only a Document or a Book (which is kind of a document, I suppose) can have these. The print preferences are what "get changed" if you take a print preset and change those before actually pressing the 'print' button.
The short of it is that you cannot set default 'print preferences' for the program; however, that ought not to be a problem because that's what Print Presets are for. And you don't need a script to save/restore these.

Set Default Value of Multi-select list item

I have a multi-select list item I want to default the value of to '%' (which is really '%null%') and have it selected. I tried setting default value of item, but it doesn't take '%null%'. I also tried a computation with a static of
:P507_ITEM := '%null%'; How do you get the default value set and selected?

Hi
Shijesh is right, you need to change your null return value and use that return value as your default. Try and use something of the same datatype as your real return values if you plan to use '%' to display all as it will make your queries simpler. eg.
Company A returns 1
Company B return 2
% returns 0
Then your query would be...
SELECT ...
FROM ...
WHERE company_id = DECODE(:P_COMPANY,1,1,2,2,0,company_id)
Hope this makes sense.
Cheers
Ben

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set a Guide at the start of a shape?

hello: Level: Newbie-intermediate OS: Win 7 Ps. Cs6
i have been searching for the answer to this question but i think that maybe i don't know how to ask it properly in the FAQ's or manual search box and so i've come here for help.
hopefully i can do better at asking it here.
when using View > New Guide ... can i get the Guide to place itself up against a Shape in the center of the Canvas (or where ever the shape is located), without knowing the Position to set the Guide at?
i thought that maybe Selecting the Shape would work but as you probably already know ... it didn't
am i way off and just hoping for something that doesn't exist?
thanx so much for your time!!

Hi JJ,
sorry, but i guess i'm a bit slow on the reuptake lately.
also, i'm asking my question in the wrong way. my not understanding is totally my doing.
i don't really understand what ticking the options under 'Snap to' does. it seems rather they are ticked or not that i still must enter the Position for the Guide.
i think this is what i've been trying to get at ... is there a way to "tell" the Guide tool that i want a Guide ... say, 10px in from the start/edge of the shape?
and rather then Position 0 being at the edge of the canvas can it be set so that it'll "think" Position 0 is at the start of a Shape instead?
so, rather than knowing that the Shape is ... say, 80px in from the left and so having to then set the 1st Guide to 80px and then the next to 90px.
i think if there is a way that it could cut down on my having to measure so much to properly place guides.
i hope this helps you to help me. and hey, most of all thank you so much for hanging in there with me & for trying to help. i really appreciate it.

Is there any way to set default column widths in the Finder's Column view

When my Finder windows open in column view, all the columns are always VERY wide. I have to then spend time resizing them to a managable width. Is there any way to set default column widths in the Finder's Column view?
<Re-Titled By Host>

No, because you can't set a columns view default.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

How to set default reject reason in VA01 (create sales order)

Hi
Everybody can tell me how to set default reject reason for item in sales order.
in our sap system there are a default reject reason as '90'. We want to set it as "Null".
Thanks
Henry

Hi,
Assigning a default Reason for Rejection is not in standard SAP. I am sure there is some enhancement/user exit which updates the reason for rejection.
Please get the help of an ABAPer, create the sales order in debugging mode and he will find out the logic behind the automatic reason for rejection.
Before that you can find the exits in the include MV45AFZZ for any code related to this.
Hope this helps

In Transaction code va41 how to set default sales contract start date

Hi ,
In Transaction code " VA41 " how to set default sales contract start date and end date.
Can any one tell me the correct user exit for the same.
Thanks
Basu

hi,
u have to use user exits or badis.
use sutable exits mentioned below.
SDTRM001 Reschedule schedule lines without a new ATP check
SDVFX006 User exit: Tax line (transfer to accounting)
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Edited by: katigiri linganna on Apr 28, 2009 12:19 PM

Any opinions on setting default values on Business Partner level?

Hi All,
I do not have a question, but would like to have a good discussion on how you should preferably be setting default values on a business partner and it's assignment blocks.
In my opinion you have two main alternatives:
1. The "old fashioned" way by using the get_<attribute_name> method and doing some checks for the perticular attribute in the context node.
2. Using the Badi BADI_CRM_BP_UIU_DEFAULTS to fill fields with a default value. With some enhancements on the assignment blocks (making typed_context attribute public and, when not called yet, calling the badi) you can use the badi for all assignment blocks.
Because I discovered via debugging that in the, by many forums suggested, badi code a programm error/exception is used so that the default values are only set during creation mode, I started doubting to use the badi. Because once I had set my data declarations to the right references and the exception did not occur anymore, suddenly it always fills the values even when there are already values filled. So additional checks are needed to assure that I am in creation mode.
Although I like the use of the badi, because all my default values on the whole business partner object can be found in the same place, it is getting a bit strange to: first still enhance the view and context node class, adjust the visibility of the typed_context, call the badi and do all kind of checks to assure that you are in the right view/context node, where this all is faster and more lean and mean when done directly in the get_<attribute_name> method on a context node.
Anyone who wants to give there opinion on this?
Regards,
Martijn.

Cameron,
Unfortunately you cannot pass the Account and Contact name before saving the record. Post default tries to capture the name just before the record gets saved, but as the record is yet to be created, the relationship wont exist and only the respective id fields will have values. If you try using account id/ contact id it will work else just pass the time stamp in the name field which will make sure there is some value when the record is saved. later in the back end you might need WS to update the field values.

Setting Default values in portal form

I have a portal Master/Detail Form. I want to set some of the detail block columns value to the value of a field in the master block.
In the formattng option of the detail column, I tried setting default value to:
p_session.get_value_as_varchar2(p_block_name=>'MASTER_BLOCK', p_attribute_name=>'A_CLASS_CD');
and default value type to: function (I also tried expression). It compiles, but gives me an error when I ry running form. How can you set the default value (from the value of a differnt field)?

HI,
You can set the default value to value of a different field. The only way is to use javascript like onFocus.
Thanks,
Sharmila

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

Setting Default Guides

Similar Messages

Maybe you are looking for