Setting default magnification for PDF export

I've created a PDF in InDesign with image files in it. The image files are scaled to look good at a certain resolution & magnification. However, when I export my InDesign document to PDF, and then open the PDF, for some reason the PDF opens at 125% magnification. This makes the images look bad.
Is there some way I can limit the size the PDF can be opened at, or at least set the default size so the user won't be viewing it at a larger size than I intended?

Yes, but you have to do it in Acrobat.
File>Properties>Initial View
Bob

Similar Messages

Unable to set default program for .pdf

CURRENT PROBLEM:
As show in print screen, when i attempt to set default program nth happens at all. The only way i can open any .pdf file now is by 1st opening adobe reader 9 and select the .pdf file manually
INITIAL STAGE OF PROBLEM:
Problem started after upgrading to windows 7 from vista. Windows 7 is able to recognise adobe reader 8 as a valid default program since it is in windows.old. Thus the default for .pdf is adobe reader 8 (it was installed in vista).
Subsequently, installing adobe reader 9 isof no use as it will be ignored and windows 7 will only continue to use adobe reader 8 as the default reader when i try to open a .pdf file, unless if i manually opened adobe reader 9 and selected a .pdf file manaually
However, I am unable to uninstall adobe reader 8 as the "program and feature" can only identify adobe reader 9 and does not think that adobe reader 8 exists.
ATTEMPTs TO SOLVE:
Thus, I removed windows.old by using the disk cleanup. However, I am still unable to set adobe reader 9 as the default reader. Instead, .pdf are no longer accessible/"open-able" unless I 1st opened adobe reader 9 and then selected a .pdf manaually.
I've attempted reinstalling and restarting comps etc, they dun seem to help. I suspect the OS is now only able to recognise adobe reader 8 from windows.old as a valid program directory due to some registry issues since it was initally set as the default when i 1st upgraded the OS. Now that adobe reader 8 is removed, there might be some corrupted registry somewhere that needs to be set right again?
Really need help with this. Thanks a million.

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

How to set default program for pdf files

I was wondering if anyone knows how to change the default program for opening a file type. For example I would like to set Adobe Acrobat as my default program for opening pdf files instead of preview
thanks

Hi and Welcome to Apple Discussions
Control-click a pdf file and choose "Get Info". In the Info window choose which application to open the file with and then click on the "change all" button. Voila!
Matthew Whiting

How to set default filepath for alv export?

when i use the standard function of alv export, list-export-local file-spreadsheet
the default filepath is "C:\Users\Administrator\Documents\SAP\SAP GUI\"
may i change the default filepath to another direction?

Anyone Help? Thanks~

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?

If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013

RDC XI R2 - Documentation for pdf export registry options

Where can we find documentation explaining the various registry options for controlling pdf export behavior?
For example, ForceLargerFonts, UsePrecisePositioningForText, etc...

Actually you can find a kbase and blog...
http://www.sdn.sap.com/irj/scn/advancedsearch?query=1435991
Short story is, set for CR 2008 but I verified from our source code it does exist in XI R2 also:
How to enable the registry keys for PDF exporting?
- Open the regedit on the machine and set the registry key at the similar location below:
[HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Crystal ReportsExportPDF]
The following are the registry keys for PDF exporting:
u2022 ForceLargerFonts
Purpose: To deal with text truncation issues.
Value:
[HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Crystal ReportsExportpdf]
"ForceLargerFonts"=dword:00000001
0 u2013 disable
1 - enable
u2022 UsePrecisePositioningForText and TruncationAdjustment
Purpose: When "ForceLargerFonts" doesn't work, implement this one. This one is to deal with text truncation issues as well.
How to use:
The new behaviour is controlled by two registry keys,
[HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 11.0Crystal ReportsExportPdf]
"UsePrecisePositioningForText"=dword:00000001
[HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 11.0Crystal ReportsExportPdf]
"TruncationAdjustment"=dword:00000005
The new behaviour is turned on when u201CUsePrecisePositioningForTextu201D is set to 1.
u201CTruncationAdjustmentu201D is used for adjusting rounding. Itu2019s only activated when u201CUsePrecisePositioningForTextu201D is set to 1. Its valid values are 0 to 10. Default value 5 should be sufficient for eliminating virtually all truncation issues.
Itu2019s worth mentioning that u201CForceLargerFontsu201D setting is ignored when u201CUsePrecisePositioningForTextu201D is set to 1.

Make Acrobat the default reader for pdf-files.

Since some time (probably after I installed Mavericks) pdf-files are by default opened
in Preview. To open them in Adobe Acrobat, I can right-click the pdf-file, choose Acrobat,
and indicate that Acrobat should be the default reader for pdf-files.
This works, and after logout and login, it does still work.
But after a reboot, Preview is again the default reader.
Also, if in Finder I right-click a pdf-file, and via Get Info I configure Acrobat
to be the default reader for the specific file and all other pdf-files (by clicking
Change All), this only works for the current session. After a reboot Preview again is the
default.
How can I make Acrobat Reader the default reader for pdf-files, and make this setting
permanent?
Where is this setting saved?
Regards,
Kees.

I finally solved this, but I still don't understand how.
To begin with I have 2 hard-drives in my iMac. The OS is on the primary HD, and data are on the secondary drive. My Home directory too is on this secondary HD.
To check whether the location of the Home directory might be the problem, I copied the Home directory to the primary HD, changed the path in my profile, and did a reboot.
The next step was to configure Adobe Acrobat as the default reader for pdf-files. To my surprise, after rebooting, Acrobat still was the default reader for pdf-files.
So it looks as if this problem has something to do with the location of the Home directory.
The original Home directory was still present on the secondary HD, So the next step was to change in my profile the path to the Home directory again (pointing again to the original Home directory on the second HD), do a reboot and delete the copy of the Home directory on the primary HD.
So now the situation was back to as it was before: the Home directory on the second HD.
To my surprise now Acrobat still was the default reader for pdf-files.
And I could also change the default reader to Preview, and back to Acrobat, and this setting was saved across reboots.
I'm curious to what solved this problem, and where the setting of the default pdf-reader, or more general, the default application for file types, is stored.
So I hope that someone who reads this, can shed some light on this.

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

Pdf on Windows 8;How do I get adobe to be the default app for pdf files.

I installed pdf reader on my windows 8 laptop, but windows only opens with its "TWINUI". In its "other" option acrobat reader doesn't appear. It also doesn't appear on the windows desktop.
How do I get adobe to be the default app for pdf files.

http://winsupersite.com/article/windows8/windows-8-tip-change-file-associations-144102

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Extending flash: how do I set default values for filenames

Hi,
I am trying to set default values for filenames
<choosefile> and <popupslider>s that will show up when
my XMLpanel first loads in my jsfl extension file. It seems that I
can only set default values for textbox items.
How do I do this for filenames and popups?
As a workaround, I also tried using a flash object dialog box
to look like a <choosefile>, or any jsfl command, but then
how do I return those values back to the XMLpanel that calls them.
and pass the data back to my jsfl script.
lemme know if you know a way,

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

Set default value for parameter fields

Good day!
Situation:
1. I have 2 parameter fields in reports (dateFrom and dateTo)
2. Before running report in ASP.NET I change value this fields (dateTo = today, dateFrom = today - 3 days)
3.I use for this source:
foreach (ParameterField crParam in CrystalReportSource1.ReportDocument.ParameterFields)
                        CrystalDecisions.Web.Parameter crParametr = new CrystalDecisions.Web.Parameter();
                        string ParametrName = crParam.Name;
                        crParametr.Name = ParametrName;
                          crParametr.DefaultValue = ActionReportParameter.GetParametrValue(ReportName, ParametrName);
                         CrystalReportSource1.Report.Parameters.Add(crParametr);
4. And repurt run without request value parameter fields.
5. BUT!!! now I need request value parameter fields before report start running - I want set default values for filelds and offer user change its before report start run.
How do this?
Thanks

I believe you need to create your own parameter promt screen. Capture what the user entered and pass that to the report(?).
slv

Setting default magnification for PDF export

Similar Messages

Maybe you are looking for