Setting default value to af:inputdate in jsf page.

Is there a way to set the input date in a form to some default value initially.
I am finding no way to do this. If I set the value from a backing bean function it does not show the date picker next to input date and new values cannot be entered. Ideally, if i set some default value initially i still should be able to change it to any date i want by using date picker next to input date.
There is no other property like "Default Value" on input date component.
Any suggestions ?
using jdev 11.1.2.3

User, you should be able to set the value your date field it's bound to. This value will then show up as default value in the ui.
Don't try to use the component itself to set the value.
Timo

Similar Messages

How to set default value in OAMessageLovInputBean?

Hi,
How to set default value in OAMessageLovInputBean while loading the page?
I have tried the following code but its not working.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String delToLoc = (String)pageContext.getSessionValue("deliverTOLoc");
Number delToLocId = (Number)pageContext.getSessionValue("deliverToLocId");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject poHeadervo =
(OAViewObject)am.findViewObject("PoHeaderMergeVO");
PoHeaderMergeVORowImpl poHeaderVoRow =
(PoHeaderMergeVORowImpl)poHeadervo.getCurrentRow();
if (delToLoc != null && !"".equals(delToLoc)) {
// poHeaderVoRow.setShipToLocation(delToLoc);
OAMessageLovInputBean msb = (OAMessageLovInputBean)webBean.findIndexedChildRecursive("DefaultShipToLocation");
msb.setValue(pageContext,delToLoc );
Please suggest me how to resolve this issue.
Thanks & Regards,
Sunita

Hi Cristoph,
We tried all the way but could not able assign characteristics value before saving the document. it means we can only see the assigned value using transaction CV02N. but our requirement is to check if the user fills any value into characteristics it should check with default value which we would like to assign whenever we create a new part of the document which we are not able to achieve.we tried a lot but could not succeed.
Nay idea if we can achieve this....
Regards
Bhuwan Tiwari

Set Default Value of Multi-select list item

I have a multi-select list item I want to default the value of to '%' (which is really '%null%') and have it selected. I tried setting default value of item, but it doesn't take '%null%'. I also tried a computation with a static of
:P507_ITEM := '%null%'; How do you get the default value set and selected?

Hi
Shijesh is right, you need to change your null return value and use that return value as your default. Try and use something of the same datatype as your real return values if you plan to use '%' to display all as it will make your queries simpler. eg.
Company A returns 1
Company B return 2
% returns 0
Then your query would be...
SELECT ...
FROM ...
WHERE company_id = DECODE(:P_COMPANY,1,1,2,2,0,company_id)
Hope this makes sense.
Cheers
Ben

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set default value for Zfeild using statusprofile

hi experts,
I need to set a default value for a zfeild using status profile.Although we can default the values,using getter and setter methods,but in my requirement,the feild will be defaulted when the page is locked,also in display mode,which will require me to write code to unlock then set the value and then write a commit,as there wont be any user action performed.
I have created a zstatus profile and have set the required status to inital,but no luck
please suggest if this canbe achived through status profile.
Regards
Anu.

Hi,
You can check in the getter if the Page is locked and then display the value to want to display. Note that this will be just Displaying the default value for the Zfield and it will not set the default value into the Zfield in DB, because when the document is locked ( means locked for editing - mostly when system status is completed ) , setters are not called and so you can display the value but cant set it. This is fine if the value you want to display in Z field is just for user's informations and its not required to save this default value.
The best approach would be to set the value in the Zfield before the page is locking. For example, If you wat to set the zfield value when status is set to "Completed" , then you can configure an action that is 1) triggered during saving of the document with 2) start condition "When status is completed" ( both 1 and 2 you can mention in action defination ), then Implement this action badi in which you can set the Zfield to default value.
This will ensure that default value is always set whenever the page is getting locked for editing ( i assumed that page lock means status completed ).
Thanks & Regards
Suchita

How to set default value to input field

Hi Experts,
I need to set default value to one input field for the transaction crmd_order as a screen variant. Guide me in doing that.
Regards,
Harish

Using the transaction SHD0, you can define the screen variant. While defining the sceen variant, you are allowed to define the default values.
Using screen variant, for the main transactoin, you can also define the transaction variant and you can use this as an independent transaction.

Any opinions on setting default values on Business Partner level?

Hi All,
I do not have a question, but would like to have a good discussion on how you should preferably be setting default values on a business partner and it's assignment blocks.
In my opinion you have two main alternatives:
1. The "old fashioned" way by using the get_<attribute_name> method and doing some checks for the perticular attribute in the context node.
2. Using the Badi BADI_CRM_BP_UIU_DEFAULTS to fill fields with a default value. With some enhancements on the assignment blocks (making typed_context attribute public and, when not called yet, calling the badi) you can use the badi for all assignment blocks.
Because I discovered via debugging that in the, by many forums suggested, badi code a programm error/exception is used so that the default values are only set during creation mode, I started doubting to use the badi. Because once I had set my data declarations to the right references and the exception did not occur anymore, suddenly it always fills the values even when there are already values filled. So additional checks are needed to assure that I am in creation mode.
Although I like the use of the badi, because all my default values on the whole business partner object can be found in the same place, it is getting a bit strange to: first still enhance the view and context node class, adjust the visibility of the typed_context, call the badi and do all kind of checks to assure that you are in the right view/context node, where this all is faster and more lean and mean when done directly in the get_<attribute_name> method on a context node.
Anyone who wants to give there opinion on this?
Regards,
Martijn.

Cameron,
Unfortunately you cannot pass the Account and Contact name before saving the record. Post default tries to capture the name just before the record gets saved, but as the record is yet to be created, the relationship wont exist and only the respective id fields will have values. If you try using account id/ contact id it will work else just pass the time stamp in the name field which will make sure there is some value when the record is saved. later in the back end you might need WS to update the field values.

Setting Default values in portal form

I have a portal Master/Detail Form. I want to set some of the detail block columns value to the value of a field in the master block.
In the formattng option of the detail column, I tried setting default value to:
p_session.get_value_as_varchar2(p_block_name=>'MASTER_BLOCK', p_attribute_name=>'A_CLASS_CD');
and default value type to: function (I also tried expression). It compiles, but gives me an error when I ry running form. How can you set the default value (from the value of a differnt field)?

HI,
You can set the default value to value of a different field. The only way is to use javascript like onFocus.
Thanks,
Sharmila

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

How to set default value and bg color of cross tab cell?

Hi all
Which way can I set default value and background color for a crosstab cell where there are no any data?
I try to pass it in following way
if isnull(CurrentFieldValue) then
But is has no effect.

Hi,
If your field is numeric
if currentfieldvalue =0 then cryellow else crnocolor
if the field is numeric but you don't see the 0 check check if : Suppress if zero is ticked in the Number format tab.
Regards

Extending flash: how do I set default values for filenames

Hi,
I am trying to set default values for filenames
<choosefile> and <popupslider>s that will show up when
my XMLpanel first loads in my jsfl extension file. It seems that I
can only set default values for textbox items.
How do I do this for filenames and popups?
As a workaround, I also tried using a flash object dialog box
to look like a <choosefile>, or any jsfl command, but then
how do I return those values back to the XMLpanel that calls them.
and pass the data back to my jsfl script.
lemme know if you know a way,

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

How to set default value in ME21N

Hi all,
I want to set default value of PO item's price unit to 1000 and make it unchangeable, is it possible? If so, could you please tell me how to do that.
Thanks in advance!
Woody

Dear Woody,
1) if u want to make any field un-editable then make it Via SHD0
2) Plz find the below link for Demo SHD0, here we need to make the field as out put only
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
Plz Provide the link to ur Abaper
Regards
kumar

How to set default values in matrix combo

hai everybody.
i want to set default values in a matrix combo box. how to do that
pls.......

Hi Priya,
Public Sub comboload1()
        Try
            ds = oform.DataSources.DBDataSources.Add("OUSR")
            oitem = oform.Items.Item("pm7")
            omatrix = oitem.Specific
            ocolumns = omatrix.Columns
           ocolumn = ocolumns.Item("V_2")
           ocombo = ocolumn.Cells.Item(r).Specific (r = row number)
            LoadEroToCombo1(ocombo)
        Catch ex As Exception
            oapp.MessageBox(ex.Message)
        End Try
    End Sub
load to combo function is below
    Public Sub LoadEroToCombo1(ByRef ocombo As SAPbouiCOM.ComboBox)
        Dim rset As SAPbobsCOM.Recordset
        Dim querystring As String
        Dim rcount As Long
        Dim rindex As Long
        Try
            rset = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
            querystring = "SELECT T0.U_NAME FROM OUSR T0"
            rset.DoQuery(querystring)
            rcount = rset.RecordCount
            rset.MoveFirst()
            ocombo.ValidValues.Add("0", "Select")
            For rindex = 0 To rcount - 1
                ocombo.ValidValues.Add(rset.Fields.Item(0).Value, rindex)
                rset.MoveNext()
            Next rindex
            ocombo.Select("0")
            rset = Nothing
            System.GC.Collect()
        Catch ex As Exception
            oapp.MessageBox(ex.Message)
        End Try
    End Sub
try this code if it helps please reward points
Regards
Cool Ice
Edited by: Cool Ice on Jul 28, 2008 1:43 PM

Setting default value to af:inputdate in jsf page.

Similar Messages

Maybe you are looking for