Setting defaults for folder view

When I create new folders (shift + command + N), I want them always to be in list view without the Sidebar. How can I set preferences or defaults so that new folders always appear this way?

Me also.
I find it a terribly inconvenient and a waste of mousing/clicking to have to reset the view to:
List
No tool bar
And no side bar
EVERY time I make a new folder.
View Options does not allow control of this.
What I have found is if I make a new folder on my DESKTOP I get the sidebar, tool bar, icon view. If I make a new folder in a window that has no sidebar, no toolbar with list view, I get no sidebar no toolbar but I do get icon view.
Why is the behavior for a new window/folder appearance different depending where you create it?

Similar Messages

In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

Adobe Acrobat 9 Pro V9.4.0
Win7 Pro x64
Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
Thanks in advance.

See my response to this post

Process open items: how to set defaults for the additional selections

Hi FI experts,
Can anyone tell me if it is possible to set defaults for the additional selections in the processing of open items.
I am using transaction F-04 (or F-06 or F-07) to post with clearing.
When processing the open items I can use additional selection parameters. In my case I need to use the document type. I would like to save this selection as a default but this doesn't seem to be possible.
1. it is not possible to save a variant for the processing of open items
2. I can not create a variant transaction (with trx. SHD0) for F-0x since this is only possible for dialog transactions
Do you see another way to store defaults for the additional selections in open item processing?
Thanks a lot.
Dimitri

Hi,
When you create a transaction variant from FB05, then also you will not able to default the value for additional selections variable. Hence SHD0 is not going to help.
As said above, either you can change the additional selection screen parameters, but here again you can't default the value. You can only reduce the number of entries on the screen.
Else you can create a custom transaction code by copying the standard. Even SAP recommends to create custom codes from standard tcode for clearing purposes depending on requirements.
Please check this link:
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/37b8e7455b11d182b40000e829fbfe/frameset.htm
In the above link, in navigation choose clearing -- Specifications for processing open items
If it is a custom transaction then you can default document number.
Regards,
Ravi

Setting defaults for text tool in CC Acrobat Pro

I am running the latest version of XI Acrobat Pro for Mac .
I can set defaults for everything except the text typing tool.
Can anyone help?
Thanks very much!

I am trying to select it, but the moment I let go of the left mouse button it disappears.

Set defaults for contacts

HI,
Can anyone tell me how to set the defaults for the contacts. Right now when I save a number in the contacts it is automatically set as a "work" number. I want it to automatically be a mobile number. This will save a lot of cut and pasting. Thanks.

20-Oct-2008 12:07 AM
orgazmic wrote:
Generally pleased with my new N96 which replaces my ageing N95 but i have noticed two bugs. I am using a simfree, nokia shop purchased N96 update to SW v11.101.098.1.
BUG 1: I've imported my contacts from my N95 and i cannot set defaults for email addresses or numbers. When the defaults option is selected from the menu in contacts the conacts application immediatley closes and i am returned to the front screen. Defaults for contacts i've created on the N96 can have there defaults set but defaults cannot be set for contacts imported using PC Suite or the phones sync utility. Also, for imported contacts the ringtone is the default nokia tune and not the tone defined in the contact or in my active profile. Again only imported contacts show this glitch with a contact created on the N96 working as expected. The default ringtone issue seems to be a common one on the forum maybe this is a connection.
BUG 2: The phone freezes if you try to resume playback of a video file whilst using a bluetooth headset (in my case a nokia BH-500). With the phone connected to the BH-500 you can play a video file from the start but when promted to continue the latest played file from last position its 'take the battery out time' when the phone locks up.
Any user got any thoughts on these anomolies??
Message Edited by orgazmic on 20-Oct-2008 12:13 AM
Hello, i have the 11.101 version and I imported all my contacts via PC suite and I CAN use the defaults option and the ringtone can be anything I want (apart for video ringtones-they don't work).
N95,N81,N96, N97

Setting Defaults for Essbase 6.1

How do you set defaults for the options/global/mouse-actions?Presently, we have to disable the mouse-actions every time we enter Excel. Essbase is overwriting the mouse-actions with Essbase functions every time we enter Excel (it does not save our changes when we exit Excel). We have also tried to work in Essbase with the preferred default settings but this has not helped either.

Is your Essbase.ini file read-only? (or the windows directory where it is located read-only?) Tim TowApplied OLAP, Inc

Setting default for scanned photos

I have a Canon LiDe 90 scanner,...I scan photos and save them as a jpg file, but the default program for all the files are either preview or Photoshop. I'm looking for a way to select all the files and set them to iPhoto. I can do them one at a time, but it's a pain,...Option click the photo, select Info, select program drop down,...then find iPhoto and clcik OK,....takes way too long! - D

The catch is that Preview is a photo viewer, photoshop is a photo editor and iPhoto is a photo organiser - and that's a key difference. You can't set iPhoto as a viewer or editor (though it can do both) because first and foremost it's a database, and as such the data needs to be imported.
So, now the question becomes how to get these pics into iPhoto. Where are they when you try to import? Will dropping them on the iPhoto Window or iPhoto icon on the dock work?
Regards
TD

Set default image folder RH8

Hi,
I wanting to change the default iamge folder in RH8 HTML, everytime I add an image, either by using the Insert button, or pasting it, the image is saved in the root project folder, rather than the iamges folder. It means I have to move a lot of stuff manually.
Can I set the folder where images should be stored in RH?
I've looked all over but couldn't find anything.
Thanks, Nick

Hi all
I hate to disagree here, but...
If you are using RoboScreenCapture, it has been my own experience that it doesn't quite work like that. What it does do is remember where I last saved an image, then present that as the suggested location for subsequent saves until it is changed again. Then the new location is configured as the suggested location.
I saw another post where it was suggested this could be manipulated via Capture > Capture Settings. But what I find there likely doesn't behave as one may wish. Sure, you may configure a default location for a "Quick Save", but you also sacrifice flexibility. You lose the ability to specify the Image File Name used and instead rely on RoboScreenCapture to name all images somewhat the same. I'm sure I'm not unique in wanting to name my images using specific file names that are easy to identify.
For what it's worth, I find the following workflow works well for me. When I capture images using SnagIt, I save the image in the desired folder inside my RoboHelp HTML project. During the process of saving, I note the image file name. Sometimes I even copy it to the Windows Clipboard. Then from inside RoboHelp HTML, I insert the image and simply type (or paste) the file name into the field. After typing the extension (I pretty much always use PNG) the image "magickally" appears in the dialog. I press Enter and voila!
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Set default for iPhoto export

How can I set the default for exporting photos from iPhoto to Desktop instead of the Pictures folder?

Not with iPhoto 11 and 10.7
For years I have used this system enhancement for these sorts of issues in every app:
http://www.stclairsoft.com/DefaultFolderX/
No connection with the makers, just a happy customer...
Regards
TD

Setting defaults for reminders in iCal

Is it possible to set a default for reminder in iCal? I would like to set it at e-mail the day before. However, iCal seems to have a reminder default as an alert (which is simply a pop-up), not e-mail. For every event I creat in iCal, I am having to manually put in the e-mail 1 day before. It doesn't remember the number of days either, because when I choose e-mail, it automatically displays 15 days. I know there's got to be some way to fix this. Any help will be appreciated.
Thanks.
Subbu44

thats what we've been doing. Problem is its gets a bit tedious when you have to constantly go through this process (and it involves a few clicks to do so) each time you open a file or place an image. The usual default is for files to be listed by name so we are not sure how or why all of a sudden it now defaults to "last modified" each time one of these menus is opened. And the defaults are fine ie. files are listed by name when opening folders outside of indesign... its only through indesign that they have reveted to "last modified".....

How to set default for ddlb in pcui?

Hi guys,
I wrote some coding in FILL_DROPDOWN_LISTBOX method, and right now I want to set default value for my ddlb field. Anyone have experience for this?

Hi Shen,
Create first domain for your DDLB field and when you assign this filed in field grp structure select the checkbox for " Domain values". So that you can see the default values in PCUI screen when launching the page.
Ex field name - suffix            ( Create domain for this field and assign values like Mr.Mrs)
      Field type - Dropdownlist box
      check box - Domain Vals
Regards
Raju.

How to set query for child View Object?

I have a hGrid in standard page. Two View Objects are present connected using view link. I need to set where clause in the child View Object. The changes are not getting reflected when i set the where clause. Also when i try to fetch rowCount it returns 0 for child View Object. But i am able to get the value for parent View Object. Any suggestions please.

Hi,
This solution worked for me last time, Please create One blank row and delete that row(For Child VO).
Why we are doing this? : Because the child vo pointer might not init. See this is not our fault, this is because of OA Framework. But this works for me :)
Thanks,
Shrikant

Set defaults for voice/no effects/no metronome

Is there a way to set GB so it defaults to open new songs as Voice/no effects and no metronome? This is what I mostly use and it would be nice to not have to make these changes every time.
Thanks

thanks, the template idea will save time.
Indeed, I have one set up with 8 tracks for doing our initial drum recordings. It has all the icons set, all the channels set, metronome is of...
It shaves a LOT of time getting things set up for our recordings. Enjoy.

Set defaults for table wizard?

Is there a way to set defaults when adding a table in contributor?
I think some of the defaults are set to:
Border Size = 1
Width = 200 pixels
For example, we would like the defaults:
Border Size = ""
Width = ""

I think you can set the default time for a transition. Go to Edit/Preferences/General.
But whether or not your transition will center at the cut depends on the characteristics of your clips.
As I explain in my book, transitions need to borrow about half a second of material from beyond the out point of one clip and the in point of the other to create the transitional segment. If one clip has that extra footage and the other does not, the transition will favor the clip with the transitional material unless you force it otherwise.
And, during slideshows, transitions will often rest off-center by default.

Set default for all controls

How do I set a default for all controls?
For example, I want the label to always appear on the left. Instead of setting the control attribute for each LED separately, I'd rather set a default to be applied to all LEDs.
I'd prefer to do this programmatically.
Thanks!!!

Hi,
one possibility is to use the function call SetAttributeForCtrls from the programmer's toolbox library.
Another, to generate the controls programmatically - if you are using your own functions to do so you can define the default as to your liking.
Wolfgang

Setting defaults for folder view

Similar Messages

Maybe you are looking for