Setting Disc Properties not appearing

Hello,
I read the User manual and it tells me to "select the disc's name in the Outline tab or click an empty area in the Graphical Tab" to make the setting disc properties appear. My problem is that I tried doing the 2 things but nothing appeared
What can I do ?
Thanks for your attention !

When you clicked on the disc name, were you watching the Inspector window? That's where the disc properties will show up.
-DH

Similar Messages

HT201406 I cannot get my touchscreen to work not even able to slide to turn on. tried resetting, waited for the apple and then the usb itunes disc/music note appeared then nothing.. is this ipod junk?

I cannot get my ipod touch touchscreen to wrok not even able to slide to turn on. Ive tried resetting, waited for the applie.. long wait then the USB plug appeared wit Itunes disc/music note then it just stayed there.. is this ipod junk?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

CD or DVD Disc does not appear on desk top ...

When I insert a blank CD it comes up on the desktop. When I
insert any CD or DVD that contains data the CD or DVD does not
come up on the desktop. I have looked at "troubleshooting a cd-rom " from Apple. I've tried a number different brands of CDs and DVDs so it isn't the disc. I've been told that I need to clean the lens on my CD player and have bought a CD cleaner made by Memorex however I can't use it because it doesn't come up
on my desktop because it isn't blank....a conundrum. Anyone out there
who could shed some light on this problem? Thank you!
Dual 1 GHz PowerPC G4 Mac OS X (10.4.5) Pioneer DVD-RW DVR-104VR
Dual 1 GHz PowerPC G4 Mac OS X (10.4.5) Pioneer DVD-RW DVR-104VR

OK WHERE IS APPLE TO FIX THIS PROBLEM? I have started idvd, control-option-p-r and still nothing. It can't be my drive because it will play data, and blank dvd's. It is the software updates I have 10.4.5 with a g5 sony super drive but I do not play movies often so I do not know which upgrade it is. Does apple look at these posts? You know there are hundreds of cases out there by the number of posts here and other threads in tiger. search "My DVD disc doesn't appear on my desktop " and see all of the threads. I bought my 5th mac because of ease of use but why there isn't a patch for this is pxxxing me off
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 1
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 900 MHz
Boot ROM Version: 5.1.5f2
SONY DVD RW DW-U10A:
Firmware Revision: A43h
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 8192 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No

SDDM 4.1 - Physical Storage Properties Not Appearing in DDL

I have only had this problem while using 4.1, not 4.0. In Tools > Preferences > Data Modeler > DDL if have the "Include Storage in DDL" box checked, and I have a Storage Template assigned to my table in my physical model. However, when I preview my table's DDL, I do not see any of the physical storage properties included. This has not always been the case in 4.1. The first time I noticed that the storage properties did not appear, I closed SDDM and reopened it. This fixed my problem temporarily, but now I cannot get the storage properties to appear at all. Is this a bug with SDDM 4.1? Or am I doing something wrong? I did not have this problem in 4.0.

Hi,
A few things to check:
1. The Physical Model that will be used in the DDL Preview is the one shown on the RDBMS Site property on the General tab of the Model Properties dialog for the Relational Model.
(Right click on the entry for the Relational Model in the Browser and select Properties.)
This gets updated whenever you do a full DDL Generation to refer to the Physical Model used in that DDL Generation. (It's initial default value for a new Relational Model is Oracle Database 11g.)
Make sure that this refers to the relevant Physical Model. Update it if necessary.
2. The relevant Physical Model must be open when you do the DDL Preview.
3. As well as the "Include Storage in DDL" option there are additional options for each individual storage clause.
These appear on the Data Modeler > DDL > DDL/Storage page of the Preferences. The relevant options here need to be checked as well.
If there still seems to be a problem, please let us know, together with any extra details you can provide.
Thanks,
David

Objective Setting and Appraisals not appear in SPRO -- IMG

Hello Experts,
I need to activate "Objective Setting and Appraisals"
its missing or not appear from SPRO --> Personal Management --> Personal Development -->Objective Setting and Appraisals in PRD System. In Development system its displayed but not in PRD, Patch Level is same and Client is Open.... so please tell how to activat it.
try to give best solution
Thanks and Regards
Dhaval Thaker

what is your EA-HR patch level?
check the note: 904109. i am not sure if it helps you or not

Record set file names not appearing ?

Could anyone tell me why the file names for the record sets that I'm creating don't show up. The "lightning bolts" representing the data show up under the rs name and it appears within the code, but the file names are not next to the bolts as expected ?
Thank you,
Fred...

Hello PZ,
Thanks for jumping in and trying to help. Sorry for my ignorance when
it comes to this as I am just diving into the world of data bases
using php and mysql. I believe I was referring to the created "table
set name" and the "fields" within them (see bottom) . In the bindings
panel the lightning bolts appear under the created table set, but the
name of the table set is not appearing and these highlighted file
names "fields" that should be next the lightning bolts to identify
them are not appearing. These names , and so on
appear in the code but not in the bindings panel next to the lightning
bolts to help me identify which one I am choosing .
The php page is working the way I want but I have to go through the
process of elimination to figure out which "field" e.g
I'm choosing when placing them in a table in my dreamweaver page. I
hope I am explaining myself properly and thank you very much again for
your efforts.
Fred...
Here is the code I'm talking about and a picture of the database I'm
getting them from.
Year built
Floors
Address
Elevator
Doorman
Gym
Contact
Pets
Parking
Fireplace
Phone:
Email:
Description:
buildingID     propName     address     neighborhood     phone     email     floors     do orman
elevator     pets     yearBuilt     propPic     inParking     outParking     fireplace
description     gym
               14     BC670     280 East 2nd Street     Downtown     2125559876     [email protected]
     6     0     0     0     1977     BC670.jpg     0     0     0     Located between Avenues C and D at
Houston Street ...     0

Installation disc does not appear

Computor opens up to sign in page, but does not accept the password. After several tries the computer suggests I change the password. My Master password is accepted, but after typing and verifying the new password the new password is evidently rejected because the entry space goes blank. I'm back were I started with the computer asking for the "old" password which is rejected after I enter the "old" password. Tried to use Installation Disc, but it does not show. Sometimes when I enter the "old" password a screen appears with a large Padlock and a entry space. I assume my password is desired, but entering new or old password doesn't allow me to enter.
I've tried SMC reset as well as PRAM reset and single user reset. I've unplugged computer overnight, detached all peripherals, etc. Can't resolve. Any solutions?

Hi Don,
If you forget your administrator password
If you don’t remember your administrator password, you can reset it using the Mac OS X Install disc.
IMPORTANT: Because a user with the Mac OS X Install disc can gain unrestricted access to your computer, you should keep the disc in a safe place.
To reset the administrator password using the Mac OS X Install disc:
Insert the Mac OS X Install disc and restart the computer.
When you hear the startup tone, press and hold down the C key until you see the spinning gear.
When the Language Chooser appears, select your language and click Continue.
In the Installer, choose Utilities > Reset Password.
Follow the onscreen instructions to change the password.
Be sure to change your login keychain password in Keychain Access to match your new account password so your keychain is unlocked when you log in.
Carolyn

Install disc does not appear

I am trying to install Tiger on a third computer I just got. When I insert the disc in the G$'s drive nothing appears on the screen. After a period of time the disc ejects on its own. I've tried to boot using the disc (Command C) but no luck.
I would greatly appreciate any ideas or comments.
Thanks

William:
As Mick asked, are you sure your optical drive is operating properly.
Next,be sure that you are using a Full Retail Version of Tiger and not computer specific disks or update version, unless they are specific to your computer, as these can be troublesome, and are a violation of the single user license agreement.
Be sure that your computer meets the minimum System Requirements for Tiger.
Good luck.
cornelius

Set role does not appear to be working

Below, I've listed two blocks of code. The first block executes just fine. The second block throws an exception on the last line. The error returned from the server is "ORA-04043: object PERSON_VIEW does not exist". The only difference between the two blocks of code is how they log in. The first block logs in as a user with more rights. The second block logs in as a user with very little rights, but obtains more rights using the "set role" statement. I used SQL Plus to log in manually as the second user, executed the "set role" statement, and had no problem describing PERSON_VIEW. What am I doing wrong in the second block of code?
Environment *pEnv = Environment::createEnvironment( Environment::OBJECT);
Connection *pCon = pEnv->createConnection( "MYAPP", "PASSWORD", "MYDB");
MetaData data = pCon->getMetaData( "PERSON_VIEW", MetaData::PTYPE_VIEW);
Environment *pEnv = Environment::createEnvironment( Environment::OBJECT);
Connection *pCon = pEnv->createConnection( "USER", "PASSWORD", "MYDB");
Statement *pStatement = pCon->createStatement( "set role MYAPP_ROLE identified by PASSWORD");
pStatement->executeUpdate();
MetaData data = pCon->getMetaData( "PERSON_VIEW", MetaData::PTYPE_VIEW);

In case anyone cares, the actual problem is that the OCCI throws an Ora-4043 when describing a SYNONYM in 10.1.0.3. This has been designated a bug and assigned to the development team. :o)

Custom List definition site columns managed properties not appearing in search results

Hi i developed a site column, custom content type and a list definition. I set the value for this column and started crawling but i don't find these properties in search schema. If i add this column manually in a library and start crawling, these properties
are showed. What 's the difference?
kesari suresh

HI,
I am able to finally crack the issue.
I forgot to add the Event Receiver for the new List Definition I was creating.
Added below lines in the Event receiver of List definition and found that the crawled properties and Managed properties (For Managed Metadata Columns) were creating successfully.
<Receiver>
      <Name>TaxonomyItemSynchronousAddedEventReceiver</Name>
      <Type>ItemAdding</Type>
      <Assembly>Microsoft.SharePoint.Taxonomy,
Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
      <Class>Microsoft.SharePoint.Taxonomy.TaxonomyItemEventReceiver</Class>
      <SequenceNumber>10000</SequenceNumber>
    </Receiver>
    <Receiver>
      <Name>TaxonomyItemUpdatingEventReceiver</Name>
      <Type>ItemUpdating</Type>
      <Assembly>Microsoft.SharePoint.Taxonomy,
Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
      <Class>Microsoft.SharePoint.Taxonomy.TaxonomyItemEventReceiver</Class>
      <SequenceNumber>10000</SequenceNumber>
    </Receiver>
Thanks,
kesari suresh

Setting options do not appear when autofill is selected

Greetings,
I am trying to set my iPhone 5 to autofill with music, it seems like itunes just picks how much music to load? I would like to pick how much

McAfee Search Advisor is being rewritten look for a new version about 3rd week of July, 2011. For more information see "Problematic Extensions". Users have been experiencing a lot of problems ever since about Firefox 3.6.6 or maybe earlier, but it is blocked at least in Firefox 5 due to a high number of crashes.
see
* Problematic extensions - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Problematic_extensions
* McAfee Communities: Latest firefox update and Site Advisor...<br>https://community.mcafee.com/message/195191#195191
* Add-ons Blocklist | Mozilla<br>https://www.mozilla.com/en-US/blocklist/

Setting Acroform field properties (not values) by importing FDF?

Am I crazy or is there a way to set "hard-to-set-field-properties-unless-you-use-javascript" by importing an FDF document. Currently, when we are programatically adding fields to an AcroForm (some of our customers still require AcroForms) we can't set certain field properties because the API doesn't expose those properties for some reason. I think I remember reading that you can import an FDF file to set field properties (not field values). Is this true?
Thanks

This is a list of some of the properties that a fellow developer gave me that had to be set by executing javascript within Acrobat:
fillColor
borderStyle
strokeColor
lineWidth
doNotScroll
We aren't setting these properties during the end-user experience. We just need to do it programmatically during the design phase.
I was wondering if we could import an FDF to set these properties. Heck, even better it would be great if we could import an FDF to create and position fields and set all of there properties. Is any of this possible?

Boot DVD does not appear in list on Option Restart

Greetings - I am attempting to run Stellar Partition Manager to adjust two partitions on my SSD drive. I have setup a dual boot configuration where 10.6.8 as well as 10.7.2 reside on that SSD drive in two separate partitions. To adjust the partitions I must restart the workstation from a Boot DVD created using that software, however after restarting while holding down the Option Key, the DVD disc does not appear as one of the choices in the bootable drives list. I believe the DVD drive is functioning properly as I routinely use it to read and write discs, including loading software. I have reset the PRAM, but that has had no affect. So far I have not received knowledgable support from Stellar, and have kind of gotten the run-around. I am hoping I can independently work around this issue. Thanks for any thoughts. Scott

Hi Larry,
According to your description, my understanding is that the Edit web part option disappeared in the list web part.
I recommend to check if the account has permission to edit the web part, please check the permission of the account in Site Permissions and the list permissions.
Please also check if the target audience is set in the web part.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

Content type (Audio) not appearing as choice for document properties in a document set

We've created a document set for which there are currently 11 Content types. When we upload a document to the document set we have the following problems:
one of the content types is not available (A customized Audio Content Type).
we can't seem to set the order in which the content types appear in the list (incomplete though it is)
we also can't set the default content type for uploaded documents.
Is there a way to resolve these issues?
Notes:
Three are several document sets in the content hub but only one in the library where this content type is used.
We're running SP2013
Thanks in advance for your suggestions in resolving this.
Barry Cohen
Barry Cohen

Hi Barry,
Based on your description, my understanding is that the content type called Audio is not available when uploading a document to the document set.
I recommend to check if the content type is added to the Allowed Site Types of the document set content type.
Please follow the steps below:
Make sure that the content type has been added to the library.
In Library settings page of the library, click Document set content type under Content Types.
Click Document Set settings under Settings.
Check if the content type called Audio is included in the Content Types allowed in the Document Set. If not, please add it to the allowed content types.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Setting Disc Properties not appearing

Similar Messages

Maybe you are looking for