Setting display language Server 2012 R2 Remote Desktop Services

I'm trying to setup local display language when user logs on to my Remote Desktop Services server.
I have configured the following GPO:
User Configuration/Policies/Administrative Templates/Control Panel/Regional
and Language Options/
Restrict selection of Windows menus and dialogs language
Restricts the UI languages Windows should use for the selected user
When I log on the user display language is not set, but it seems that the GPO has been applied correctly (GPResult)....
What am I doing wrong ?

Hi,
Thank you for your posting in Windows Server Forum.
As you have configured GPO setting, please have a look at registry setting and check whether it is properly configured over there.
The Display Language was controlled by the REG_MULTI_SZ key PreferredUILanguages under
HKCU\Control Panel\Desktop
Create this key "PreferredUILanguages" with ja-jp when need Japanese and delete it to get back English. 
You can export this Registry Key and import it instead of edit this key directly. 
[HKEY_CURRENT_USER\Control Panel\Desktop]
"PreferredUILanguages"=hex(7):6a,00,61,00,2d,00,6a,00,70,00,00,00,00,00
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

  • Server 2012 R2 Remote Desktop Services Licensing

    I currently have a single Remote App server running on server 2012 (not R2). Let's call it Remote1 for simplicity.  I want to add a second individual server (Remote2) running it's own connection broker, gateway and session host on one machine. 
    Is it possible to do this while having Remote1 acting as the license server or would I have to add Remote2 to the server pool acting as a session host only?  Would purchasing Remote2's own set of CAL's make this work?

    Is the license server and the session host in the same domain? You don't have to put Remote2 into pool where you have Remote1.
    They both can act as seperate entity as you said. But if the only need is to have remote1 as a license server for remote2 then you can use the following method to specify the license mode and license server on remote2
    Configure the Remote Desktop Session Host role with to use the localRemote Desktop Licensing server. Follow these steps:
    Open an elevated Windows PowerShell prompt
    Type the following command on the PS prompt and press Enter:
    $obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
    Run the following command to set the licensing mode:
    Note: Value = 2 for Per device, Value = 4 for Per User
    $obj.ChangeMode(value)
    Run the following command to replace the machine name with License Server:
    $obj.SetSpecifiedLicenseServerList("LicServer")
    Run the following command to verify the settings that are configured using above mentioned steps:
    $obj.GetSpecifiedLicenseServerList()
    You should see the server name in the output.
    Hari Kumar --- Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights

  • Dictionary Option in Word 2013 Standard on Server 2012 R2 Remote Desktop Services Server

    We have a customer running Server 2012 R2 RDS with Office 2013 Standard. They are licensed for Office 2013 via Office 365. Office 2013 Standard is installed on the server via a using the Volume license as directed by MS. 
    Each user has a Microsoft Office 365 account.
    When the user attempts to use the Right Click -> Define Option in MS Word, the user is prompted to sign in so they can select a dictionary. 
    This is where the problem begins. The login process does not accept the users Office365 account. I was able to create a new Microsoft account (using the same email address as the Office 365 account) and select a dictionary.
    Is this the only method to get the dictionary to work? All 100 users must create another Microsoft account and use that to select a dictionary?

    Hi,
    What Word prompts when user attempts to login with the original account? Any error messages?
    Since the feature will work if you create a new account, have you ever compared the property of these two accounts? Maybe the security or permission setting during the creation process?
    We lack testing environment here for this kind of issues, and we have another dedicated support teams in
    Microsoft Office 365 Community. I would suggest you to post there, where you can get more experienced responses:
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Thanks,
    Ethan Hua CHN
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Does Windows Server 2012 support Remote Desktop Client 6.1?

    Hi,
    Does Windows Server 2012 support Remote Desktop Client 6.1? IU can't find a link anywhere on the Microsoft site to confirm this!
    Thanks,
    Jim

    this should help you
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • Server 2012 R2 Remote Desktop Gateway. Most Simple and Secure Design For Small Environment?

    We would like users to be able to connect remotely over the Internet from their personal devices to their primary Windows 7 workstation (a physical box on their desk) by using the Microsoft RDP Client For Windows, Mac, iOS and Android.  There is no
    plan to use RDWeb or Remote Apps, or VDI.  Just plain remote access to their desktop PC without VPN plus a third party 2nd factor authentication product that can text them back a code to enter with their AD credentials (AuthAnvil or Duosecurity)
    We do not have TMG or ISA.
    We would like to get these services all running in a single server and be as simple as possible while still being very secure.
    The recommendations I see seem to suggest putting the RDG in a DMZ with either a domain controller on a new domain with a one-way trust to your internal domain or else a read-only domain controller on your domain and then RD Session Host and License server
    located on different servers on your internal LAN.
    http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
    That sounds like a lot of separate servers and cost for not a lot of users in our environment.
    Do we even need a separate session host server if there are no RDP sessions being hosted directly on the servers because  the users are only being redirected to connect to their workstations and will never be using terminal sessions on the server?
    Can the RODC or the Domain controller on new domain with the one-way trust be the same server as the Remote Desktop Gateway server and not separate servers?
    What is the most minimalist way to set this up with good security when opening all the ports needed to authenticate with internal DC is not secure enough?

    #2 sounds like we would need 2 Essentials servers and we will not have that.
    We currently have Server 2008 R2 and have 2012 Standard licenses that are not yet used.
    We have much more than 75 users total, but 75 is more than the number of users that will probably take advantage of using RD Gateway any time soon.  It will probably take time to catch on.
    If RD Gateway usage was to get super popular and more than 75 users were depending on access to it, then we could financially justify paying to buy all the CALs needed to run RD Gateway without Essentials.  Right now, they are skeptical that it will
    be worth spending much money on this and don't want to invest a lot  of money up front.
    My understanding is that if we have 75 or fewer users using RD Gateway then we need to by no CALs, just apply a Server Standard Edition License to the server, but if we had 76, we would need to turn off Essentials and buy 76 new CALs.
    Or would we need to add 50 CALs to the 25 that automatically come with Essentials?
    Also does "turning off" Essentials mean we would have to reinstall and redeploy the RDG or is it just a matter of enabling the RD license server and adding purchased CALs?
    No, when you buy essentials you get the right to create 25 users that access the server, when you create the 26th user you will need to have 26 CAL and RDS CAL. 

  • Server 2012 RTM Remote Desktop Connection Broker Role Won't Install

    Hey guys,
    I have been searching for and trying fixes for this for 3 days, and I've gotten no where.  Thanks in advance for trying to help me out.
    Here's the situation:
    I have a brand new installation of the Windows Server 2012 Datacenter 64-Bit RTM from MSDN.  This is my one and only server (just my personal one for home), so I'm using this single server to run all of the services that I need.  After a fresh
    installation, I added the AD and DNS roles and promoted the server to the PDC.  Then I go to add the Remote Desktop Virtualization Services (the VM virtualization role).  The installation fails, but I can't find any explanation as to why.
    I've wiped out the OS and reinstalled from scratch at leat 15 times, trying various combinations, fixes, approaches, etc.  including powershell, Remote Desktop Services Deployment, standard role-based deployment, etc.
    Using the role-based deployment, I can get every 'Remote Desktop Services' component to install except the Remote Desktop Connection Broker.  I've tried enabling RDMSUI_TRACING, but didn't get any information at all as to why it's failing.  I also
    cannot find RDMSDeploymentUI.txt log.
    I've also tried to deploy this using Powershell using this command:
    New-SessionDeployment [-ConnectionBroker] <string> [-WebAccessServer] <string> [-SessionHost] <string>
    That particular item does provide some error messages, but they seem to complain about the Session Host not being able to install due to not being able to find the connection string key in the registry for the Windows Internal Database.  However, I can
    get the session host and every other component to install using role-based deployment, except the Connection Broker.
    I've run an SFC scan, which found no issues.   I've also tried applying the one update available in Microsoft Update, and tried it without applying that update (reinstalling between attempts of course).
    I'm completely at a loss.  Has anyone encountered this before?  Any suggestions would be greatly appreciated.  Is there a powershell command for just installing the Connection Broker that might provide some additional error information, or any
    information at all?
    I would greatly appreciate any help anyone could offer.  I'm willing to try anything.  Thanks for taking the time to read this.
    Sincerely,
    Dominick

    Also Found this:
    1. You try to install the Remote Desktop Connection Broker (RDCB) on a server that also has the Active Directory Domain Server (domain
    controller) role installed. This configuration is not supported by Microsoft. You need to install the RDCB on a server that does not have this role installed. See: Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012 http://support.microsoft.com/kb/2799605
    2. If you don’t have the Active Directory Domain Service install, this issue might be caused by the Windows internal database (WID) that
    the connection broker installs and the Windows Update KB2821895. If you have KB2821895 installed, unfortunately you can not uninstall this KB. Try to install the Remote Desktop Connection Broker (RDBC) role on a server that does not have this Windows update.
    Note: There is currently no official communication from Microsoft that here is an issue with RDBC and KB2821895. However, try the RDBC installation
    without this KB and see what happens.
    For more information, Refer below link...
    http://fabrikam.wordpress.com/2013/07/15/connection-broker-installation-failedremote-desktop-deployment-issues/

  • High availability SQL Server requirements for Remote Desktop Services in Windows Server 2012

    Good night,
    Thanks for reading this question, I do not write much English.
    I am implementing Remote Desktop Services in Windows Server 2012, I need to know the size of the database to create and feature on the .mdf and .ldf, I searched in different microsoft link but I have not received a response.
    Kindly appreciate your cooperation and attention.

    Hi Alejandro,
    I am implementing Remote Desktop Services in Windows Server 2012, I need to know the size of the database to create and feature on the .mdf and .ldf
    If you want to know the size requirements of .mdf abd .ldf files, since they are parts of SQL database, I suggest you refer to SQL forums below to get more professional support:
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlgetstarted
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/home
    In addition, here are some articles regarding RDS deployment for you:
    Remote Desktop Services Deployment Guide
    https://technet.microsoft.com/en-us/library/ff710446(v=ws.10).aspx
    Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style
    http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Windows Server 2012 Standard - Remote Desktop Management service won't start

    Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
    The Remote Desktop Management service gives the following error message any  time it is attempted to start:
    "The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
    The Event Viewer error message is as follows:
    "The Remote Desktop Management service failed to start. Error code: 0x88250001"
    Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
    server and has AD DS role installed, is virtualized to have one Hyper-V server.
    I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
    only one suffering from this issue.
    I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
    Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
    How do I mend Remote Desktop Management service to start?
    Appreciate your help!
     

    Hi,
    Thank you for posting in Windows Server forum.
    Can administrators perfectly connect to RDS environment?
     In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
    also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
    No RDS license when you connect to an RDS farm in Windows Server 2012
    http://support.microsoft.com/kb/2916846
    If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
    What's New in Remote Desktop Services in Windows Server 2012
    http://technet.microsoft.com/en-in/library/hh831527.aspx
    Install Remote Desktop Services Failed on Windows 2012 Server
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Audio service hangs on Windows Server 2008R2 with Remote Desktop Services

    Hello! 
    I have some terminal servers on Windows Server 2008R2. Users have the ability to use web browsers (IE, Firefox) with the included Flash Player, IM clients / Internet
    telephony (Skype, ICQ), Windows Media Player, Office, and a specific internal software (works with MS SQL). I have the following problem: the Windows audio service hangs up that leads to hangup of all programs which use it, such as: any sites in Internet with
    a flash content (in all browsers), ICQ, Skype.Even logging out the session hung when tried to lose a sound. It's impossible to stop or restart service from the services.msc the service just hang with status "restarting". To stop service I terminate svchost
    process. As soon as the audio service is stopped - all programs start to work correctly (certainly without a sound). This problem appeared not suddenly - periodic hangups of programs on servers were marked long ago (more than half a year), but not directly
    were connected to audio service, especially there were they rather rare (on the average once a week - two) and were corrected by server reset. The error message: 
    Error container , type 0 
    Event name: AppHangXProcB1 
    Reply: No data 
    Ident CAB: 0 
    Problem signature: 
    P1: iexplore.exe 
    P2: 9.0.8112.16446 
    P3: 4fb57c8f 
    P4: 77c1 
    P5: 131200 
    P6: svchost.exe:AudioClientRpc 
    P7: 0.0.0.0 
    P8: 
    P9: 
    P10: 
    shall suggest an idea about a sound service, but in Event Viewer has no Windows Audio events. 
    Recently I updated Skype to the last version 6.0.66.120. Before was 4.2.35.155 because versions 5хх on Windows2008R2 with the Remote Desctop Services actually don't
    work, if users at the server more than one or two. We checked the sixth version by the test machine with the terminal environment and very were delighted to its normal working capacity. However after installation of this client on production servers it appeared
    that hangups of programs on servers began to occur on the average time at an o'clock in case of an average daily load (about 20 users on one server). If you have worked one or two users, problems weren't watched. Internet search led me to the support page
    Skype, where the Windows 7 x64 user faced a similar problem in the fifth version of the program. But the solutions proposed by the support team does not help me. In addition, I found the advice to disable enhancements in the properties of the playback device,
    but it is impossible for the "Remote Audio" device. 
    At the moment, on servers where I updated the Skype, I disabled the audio service. If within a reasonable time, I do not find a solution, I will have to revert
    to an older version of Skype, but I would like to solve the problem completely. 

    Enable the Allow audio and video playback redirection Group Policy setting
    To allow audio and video playback when connecting to a computer running Windows Server 2008 R2, you must enable the Allow audio and video playback redirection Group Policy setting. The Allow audio and video playback redirection Group Policy setting is located
    in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection and can be configured by using either Local Group Policy Editor or the Group Policy Management
    Console (GPMC).
    For more information about Group Policy settings for Remote Desktop Services, see the Remote Desktop Services Technical Reference (http://go.microsoft.com/fwlink/?LinkId=138134).
    Is this policy applied? Refer:
    http://technet.microsoft.com/en-us/library/dd759165.aspx
    Also, have you tried update the audio device driver for this terminal server?

  • Adobe Acrobat X on Server 2003 (using remote desktop services)

    Hi guys,
    I need to purchase a copy of Adobe Acrobat for Windows Server 2003 for use in Microsoft Dynamics GP 2010, as well as everyday Acobat read/write tasks. There will be about 4 or 5 simultaneous users connecting to the server using RDP (via Windows Vista and 7).
    My question is, will a single copy of Adobe Acrobat X Standard suffice or work properly on Windows Server 2003 for all users?
    I can't seem to find any information on Adobe Acrobat X and terminal services (or Remote Desktop Services).
    Hope I've made sense, and any help will be appreciated
    Thanks
    -Rhydz

    Hi,
    What Word prompts when user attempts to login with the original account? Any error messages?
    Since the feature will work if you create a new account, have you ever compared the property of these two accounts? Maybe the security or permission setting during the creation process?
    We lack testing environment here for this kind of issues, and we have another dedicated support teams in
    Microsoft Office 365 Community. I would suggest you to post there, where you can get more experienced responses:
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Thanks,
    Ethan Hua CHN
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Server 2012 RDS - Remote Desktop Connection Broker Client failed to redirect the user domain\username. Error: NULL

    Seeing the error listed here.
    The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.
    Pooled virtual desktop collection name: NULL
    Error: Error code: 0xFFFFFFFF.
    Broker and Hyper-V are on the same physical machine.
    Any ideas on where to start troubleshooting this?
    Used the happy wizard to create everything, and got no errors.
    I have created a small pool collection, and given rights to domain users. Everything "looks" good.

    I have the same problem.
    (Making this long hand for those who come after)
    I have installed SQl Management Studio Express 2012 SP1
    http://www.microsoft.com/en-us/download/details.aspx?id=29062 
    (You only need the one file "SQLManagementStudio_x64_ENU.exe")
    Ran this as Administrator 
    And typed in the Server Name field
    \\.\pipe\MICROSOFT##WID\tsql\query
    Then hit connect.
    Expanded Databases (+sign)
    Expanded RDCms 
    Expanded Tables
    Right Clicked on rds.target, select Edit top 200 rows
    Right Clicked and copied, then pasted this into a notepad file on the desktop (As a backup)
    Right Clicked and selected Delete to delete the row with the data in it (and PoolID was set to Null in this row)
    Did the same for rds.pool
    Manually added Remote Desktop server into the MEMBER OF tab of
    “Windows Authorization Access Group” via Active Directory Users and Computers. As this domain was Windows 2003 Native when the RDS server was first installed.
    Rebooted server and same issue>
    Checked SQL again and rows had come back.
    Is that what you meant by "delete
    the rds.target and rds.pool with pool id = NULL"?
    Not a SQL guru, so any help appreciated.

  • Server 2012 r2 /Remote Desktop

    I am connecting to a Server 2012 R2 server and it connects shows the desktop for a split second and then dissconnects. I tried connecting with a rdp client Win 7 pro from different locations and different machines. The only thing the event log displays is
    the following:
    Log Name:      Application
    Source:        Desktop Window Manager
    Date:          3/28/2014 10:08:33 AM
    Event ID:      9009
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Computer:      Server2014.Purgistics.local
    Description:
    The Desktop Window Manager has exited with code (0xd00002fe)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Desktop Window Manager" />
        <EventID Qualifiers="16384">9009</EventID>
        <Level>4</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-03-28T14:08:33.000000000Z" />
        <EventRecordID>11842</EventRecordID>
        <Channel>Application</Channel>
        <Computer>Server2014.Purgistics.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>0xd00002fe</Data>
      </EventData>
    </Event>
    Any help with this matter would be greatly appreciated. Help!

    Below are the answers you asked for.
    Is this same when you rdp using IP or Hostname?
    Yes
    Is this same for all users or any particular?
    Administrator account. Any other user with full Enterpise Admin rights it says The Local Session Manager service failed the logon. The requested session is not supported.
    What is the status of the firewall on both machines? Off
    RDP services are running properly? Yes I can RDP to another server on the WAN.
    What is the status of Remote tab of System Properties? It is enabled with No security.
    Help!!!!
    I

  • Server 2012 R2 Remote Desktop Connection Broker

    I have installed RDS on a server named PLUTO on which Windows 2012 R2 datacenter is in. There is a domain controller (domain name: AGROSY) running on a Linux server. We have used Samba 3.6.6 to control the file sharing system.
    When I attempt to install RDS in Server Manager, it states as following: could not retrieve the deployment information from RD connection broker server pluto.AGROSY.
    Then, I searched a lot of solutions, e.g.  and tried as following:
    Enter-PSSession -ComputerName pluto   --> which works;
    but Enter-PSSession -ComputerName pluto.AGROSY   --> which gives the error message as: Enter-PSSession : Connecting to remote server pluto.AGROSY failed with the following error message : WinRM cannot process the request. The following
    error with errorcode 0x80090311  occurred while using Kerberos authentication: There are currently no logon servers available to service the logon request.
    If I ping the pluto.AGROSY, it works as well.
    I have no idea how it can be solved, please help me out. Thanks a lot!

    Hi,
    Thanks for your comment. Sorry for late reply.
    Initially please enable the PowerShell remoting in your case. 
    Enable-PSRemoting
    http://technet.microsoft.com/en-us/library/hh849694.aspx
    For FQDN name, please see that RDCB is properly configured and also certificate which you have used for RDS environment must be trusted with its private key and must match the FQDN name of the server. Did you seen the certificate has been properly used and
    configured. You can go through following article for certificate and also for configuring RDCB role.
    Configuring RDS 2012 Certificates and SSO
    Configuring HA for the Remote Desktop Connection Broker in a 2012 RDS Farm
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Logging into Windows Server 2012 from Remote Desktop requires "Connect with Smart Card"; how do I disable this?

    I am using pretty much the default setup. I cannot figure out how to disable this. I do not want to use smart cards.
    Any ideas?

    Does this mean you're trying to RDP from an XP box, therfore have the Remote Desktop feature on the server set to "less secure"? Sounds like thats what disables network authentication, prompting the Smart Card request.
    If you simply click to login as a different user, you can login without a smart card, to include the same user as was being prompted for the card.
    I expect if you choose the Remote Desktop feature requires network authentication on the server, the smart card requirement goes away, but you'll need to login from Win7 or newer clients. Not sure where Vista falls, probably okay too.

Maybe you are looking for

  • I have a hp officejet pro 8500a premium printer,

    I changed the ink cartridges that it ask for and it still says that they are empty. i cleaned it with alochol and turn it off for 10 min. also all night and it still says they are empty. please help. Thanks

  • How do i charge my iPhone 5 properly?

    Hello all!           Hoping you could either give me a link or list what i should do for the first charge and charges thereafter for the new iPhone 5 im getting! i heard the battery can be a pain in the a$$ on these and i want to look after it! thank

  • Values of dynamic selections for LDB DDF

    Hi I have to customize a SAP standard program which is using LDB-DDF. As per client requirement, we have to add a few select statement and there we have to add the selection criteria of dynamic selections. The problem I am facing is that I dont know

  • Web Service Error - no service endpoints found

    Hi, I tried to create a web service deployable proxy project to consume an external third party web service url. There were no files generated for Logical Ports and Proxy Classes, though there are files generated for WSDL and SEIs. A further test on

  • Why is iWeb converting all my PNG file to JPG upon publishing

    When I drag and drop a PNG image to iWeb, it shows up fine in iWeb, but once I publish it to either my site or to a folder, all the PNG images are converted to JPG with a very low quality.... Is there anything i can do to stop iWeb from changing my i