Setting duration a slide stays on screen, where is this set in Keynote 3?

I want to know where do I set the duration of how long a slide stays on screen before it advances? What other settings affect duration? Are the setting for the desired time a slide stays on screen preserved when I export to a Quicktime movie?
As always thank you for your time in reading my post,
Sebastian

The duration is actually set for the transition. The longer the delay for the transition, the longer the slide stays up. The qt export timings are sometimes off, especially when you're using QT movies on your slides and timing things to them. Most of the time though, things work okay.

Similar Messages

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • How to get last slide to stay on screen?

    How do I get the text on my last slide to stay on screen
    indefinitely? I've got my project preferences set to not fade out
    on last slide, but the screen goes blank when I get to the end of
    my timeline. Any ideas? Do I have to set an invisible click box
    somewhere on screen so that the screen doesn't fade away?
    Thanks in advance.

    Welcome to our community, rhall01
    More than likely, the text is probably in the form of a Text
    Caption. If you examine the properties of the caption, it is
    probably set to Fade in and out. So changing from Fade in and out
    to Fade in only should do the trick.
    Other than that, a Click Box object should work too.
    Cheers... Rick

  • How to make  the last slide stay on the screen ?

    Hi,I need to make the last slide of my animation to remain on the screen when the animation ends and also when I export in a quick time movie .
    Does anyone can help me?

    A possible workaround would be to have something appear (like a shape) as a build outside the slide's viewing boundary (if you extend the size of the window, you'll see you have some workspace outside the slide) autmatically after the animation is finished, and set a delay time or build duration based on how long you need the slide to remain on the screen.  How this works will depend on your setup for quicktime export.

  • So, i just got my iPod touch and i plugged it into my computer and it wont show up on itunes. Plus, it stays at the screen where it says to plug it in.

    So, i just got my iPod touch and i plugged it into my computer and it wont show up on itunes. Plus, it stays at the screen where it says to plug it in.: someone please help!!!!!!!!!

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    . Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Why does my title text stay on screen for the duration of my iMovie?

    Adding a title text to my iMovie, can someone help me figure out why it stays on screen for the duration of the video? Can't seem to find a way to edit the duration of the text.

    The flashing globe icon means you are trying to start from a netboot server that doesn't exist or is offline.  This will fix it: http://docs.info.apple.com/article.html?artnum=31355

  • HT4623 i have pressed start to install updates, but now my iphone 4 will not stay on, screen showing picture of cable & itunes sign when i attach to computer it only ask me to restore to factory setting and i dont want to lose my photos ect, Thanks Angela

    i have pressed start to install updates, but now my iphone 4 will not stay on, screen showing picture of cable & itunes sign when i attach to computer it only ask me to restore to factory setting and i dont want to lose my photos ect,
    Thanks Angela

    Your phone is in recovery mode.  All your data are already gone.

  • Make click box feedback stay on screen

    How do I make the feedback for a clickbox stay on screen till the learner moves on? I see where I can designate a specific number of seconds for it to stay on screen, but I just want it to stay on the screen indefinitely till the learner moves on...so, for the rest of the slide, basically.

    In that case you will need to add either a Text Caption or a Smart Shape with the feedback text you want and configure it as hidden. Then create an Advanced Action that will make it visible.
    Cheers... Rick

  • Captivate 6.0 - I want to make a rollover shape stay on screen if user wants it to

    I have used smart shapes as rollover popups. However, I'd like to give the user the option to select a shape or more to stay on screen, by probably clicking on it. The purpose is to give user the ability to compare the content of selected smart shapes, thus viewing both or more on the screen at the same time.
    Any ideas or does anyone know of any widget that could do this, please?

    Instead of using a rollover you could try adding a button which, when clicked shows the text box.  You set this up by inserting a button (you can make it transparent if necessary).  Under Action in the properties panel choose On Success: Show and then select the appropriate text box.

  • My ibook g4 took a install from apple update . Why is it not going past the screen where is shows Mac OS X

    My ibook g4 took a install from apple update . Why is it not going past the screen where is shows Mac OS X

    Did you verify the hard drive before installing the update? You could have had hard drive corruption where the computer did not know where all the files are and something didn't get installed correctly.
    Did you repair permissions?  The installer may not have been able to overwrite a file if the permissions on files were not set correctly.
    Frankly, the easiest thing will be to re-install the operating system from the installer disc.  While booted to the disc make sure you run Disk Utility First Aid to repair the drive and permissions, then install.  Many of us prefer to download updates from Apple rather than rely upon Software update. we use SU to tell us what we need but we download them separately.
    For which operating system was this update?  Apple hasn't brought out a new system update for G4s in quite a while.

  • I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

    I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

    @Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
    UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
    Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
    You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
    Exit out of Outlook and reboot your machine.
    Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
    Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
    IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
    You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
    Everything should now sync pretty seamlessly.
    I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
    Arthur P. Johnson

  • Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

    Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

    Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4))    I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

  • ITunes LP material only stays on screen for 10 seconds

    I have ATV (software up to date 17/APR/10) hooked up to iTunes 9.1(79) on Snow Leopard all updates installed. The issue is, when playing back an iTunes LP on Apple TV, I can see the navigation screens, view lyrics, etc. but they only stay on screen for 10 seconds then ATV just jumps back to displaying the old album cover and song title as per non- iTunes LP titles.
    I don't have shuffle set or anything like that and the iTunes LP is synced and the include iTunes LPs and include videos boxes are both checked in iTunes. So basically it isn't that I can't work iTunes LPs on ATV, just that most of the time,, the lyrics have disappeared off screen before the first line has been sung.
    Help!
    Message was edited by: Nidi

    See the white-screen topic of:
    iPod touch: Hardware troubleshooting

  • IPad 2 "Slide to Unlock" screen does not come up...

    When I close my smart cover and then re-open it, the "Slide to Unlock" screen doesn't come up.  Now it goes straight to whatever page I was on before I closed the cover.  I didn't change any of the settings, any reason why?  And how do I get the locking screen back when I close the smart cover?!!

    One must know that voiceover application on mode will not work with slide application, so first you have to off the voice over application, for that pl follow steps as under.
    1) go to general application by single tab to setting button, followed by double tab to same button.
    2) you would be in general manu, wherein again single tab to about application.
    3) pl now understand carefully, use your four(4) fingers simultaniously to slide the screen, pl slide on upward direction ( in any case with help of 4 fingers your slide application would work with voiceover application on mode).
    4) single tab to accessibility option, then double tab to same button.
    5) go to voiceover application with sinlge tab, change voiceover application on mode to off mode.
    6) say thanks to yourself and enjoy ipad2 again.
    RBvaidya- Mumbai
    my advise to you young guys: pl wash yr eyes four to five time by a tap water but do not use the towel to clean the water from eyes for 5 minutes, (this you should do as and when you get up from yr pc/ipad/mobile for other work.) your stress would get reduced to 90%

Maybe you are looking for