Setting focus to InputField in WebDynpro

Hi All,
How can I dynamically set focus to a WebDynpro field. API?
Guys please reply!!
Dhanya

you can use requestFocus method where necessary (wdInit method of the view controller?)..
e.g.
IModelHeaderElement modelHeaderEmt = wdContext.currentModelHeaderElement();
IWDAttributeInfo notifNumInfo =
          wdContext.nodeModelHeader().getNodeInfo().getAttribute(IModelHeaderElement.NOTIF__NO);
wdControllerAPI.requestFocus(modelHeaderEmt, notifNumInfo);

Similar Messages

  • How  to set focus on next row inputfield in table

    Hello all,
    How  to set focus on next row input field in table
    Please help.
    Thanks in advance.
    CSP

    Hi,
    use the following code
    wdThis.wdGetAPI().requestFocus(nodeElement, attribute)
    Ex:
    Provide the attribute and replace the nodeElement with that of yours
    IWDAttributeInfo attributeInfo = wdContext.getNodeInfo().getAttribute("Your attribute");
           wdThis.wdGetAPI().requestFocus(wdContext.currentContextElement(), attributeInfo);
    Regards
    Ayyapparaj

  • How to set focus on an input field by coding?

    Dear friends,
    Do you have such experience if we can set focus on an input field by code?
    Thanks and best regards,
    Anders

    Hi,
    There are two ways to set the focus of an inputfield.
    1) In the BSP page add the attribute focus to an inputfield and set it to true.
    Ex: <thtmlb:inputField id = "test"
                          focus = "TRUE"/>
    2) Using the P-getter in the case where the inputfield is created using the config tool.
    Ex: CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_focus.
    rv_value = abap_true.
    ENDCASE.
    regards,
    MuralidharPrasad.C

  • Regarding Focus on InputField

    Hi Experts,
       I have created 3 input fields in a view.
       I set focus on First Inputfield
       When i click Tab in keyboard the focus went to address bar.
      I want to set the focus on next inputfield when i click tab .
      Plz give me suggestion

    Hazrath,
    Keep all the input fields in a transparent container. Make sure the 'labelFor' property of the Labels for the input fields, point to one of the inputfields. (otherwise, tab focusses on label instead of inputfield.
    Try and let me know.
    Regards,
    Rajit

  • Setting focus on a component from backing bean

    Is there an easy way to set focus in a specific component on the jspx from a method in the backing bean? (other than javaScript coding...)

    Hi,
    did you take a look at
    About control the cursor position in a JSF web page
    It contains some links to other weblogs. The links are helpfull. Maybe you'll be able to find your solution there......
    Good luck
    Luc Bors

  • How to set focus on a input field in a selected row of a table?

    In a previous discussion (http://scn.sap.com/thread/3564789) I asked how to access an input (sap.m.Input) field of a selected row in a table. In the answer that was supplied I was shown how to get the items of the table. Then using the selected index to get the selected item get the cells. Then I could set editable on the proper cell(s). This worked fine.
    Now I need to set the focus on one of the fields. I tried something like this:
                var oNewLink = table.getSelectedItem();
                var oNewLinkName = oNewLink.getCells()[1];
                oNewLinkName.focus();
    But this doesn't seem to work.
    I have searched through other discussions and have seen this technique for putting focus on a field if you have its ID:
    sap.ui.getCore().byId(id_of_the_input_field).$().focus();
    In my case though I do not have an ID since the row and its cells are generated. How can I set focus on the cell of a certain row in a table?

    Hello Venkatesh. Yes that code does work. First I tried it on a table cell that was already rendered and it did work. The next time I tried it on a table row that was being added and it did not work there. So I added an on after rendering function for the table and added that code there. That did not work until I added a delay (timeout) to do a context switch before calling the focus and that worked.
    Once last thing though sometimes when I call focus on an input field (actually in a table row cell) if the field has text in it already the flashing cursor is at the beginning of the text and other times it is at the end of the text (which is the desired way). It depends on where I click in the row. Is there anyway to make sure the flashing cursor is at the end of the text when the focus is applied to a field that contains text?

  • How to set focus on the title of JTabbedPane

    I have created a JTabbedPane and added three JPanels to it. They are titled, say "Panel 1", "Panel 2" and "Panel 3". And each of them contains buttons and text areas. Since this app is for physically disabled users, it must provide navigation through these three tabs with keyboard operations only (i.e. without mouse clicks).
    When the title "Panel 1" gets focused, users can go to "Panel 2" by the right arrow key. When Panel 2 is brought up, however, the title "Panel 2" does not get focused. Instead the first button inside panel 2 is focused. In order for users to navigate to 'Panel 3" by the arrow key, the title "Panel 2" has to be focused. How do I set focus on the tab title?
    I have tried 'requestFocus()' on Panel 2, but it does not work. Please help me with this issue. Thanks in advance.

    I'd be quite interested to know if this can be doen as well so I thought I'd post this message to move it to the top of the board.
    Thanks.

  • How to set focus on a custom PO Item screen field when in error?

    Hi All,
    I have an interesting situation that i'm wondering if others have solved.  We have extended the PO item table (EKPO) by adding two new fields.  We then have implemented two BAdI's:  ME_GUI_PO_CUST and ME_PROCESS_PO_CUST to add them to the ME21N/ME22N/ME23N screens and logic to do some validation, via these respective BAdI's mentioned.  Everything works perfectly - with one small issue.  When we are doing some validation via a method on the ME_PROCESS_PO_CUST - and "invalidate" the field (and throw an error) when it is in error - I also want to be able to "set focus" on the field in question (basically: go to the particular tab on the ME* screen and highlight the field).  I have tried using SET CURSOR FIELD *****  within this BAdI (ME_PROCESS_PO_CUST) - but doesn't seem to work.  Has anyone tried to do this and have come up with a solution?  Would be much appreciative if you shared it!!!  Thanks much.
    Cheers,
    Matt
    ERP version that we have is:  ECC 6.0

    Just have a look at oss note 310154 - ME21N/ME51N: Customer-specific check, generating error log.
    In short:
    Add your error messages in EXIT_SAPMM06E_012 (using specific macros).
    Sample code (provided in Oss note) :
      loop at tekpo where knttp eq 'X'.
        loop at tekkn where ebeln eq tekpo-ebeln and
                            ebelp eq tekpo-ebelp and
                            kostl eq space.
          if not tekkn-id is initial.
            mmpur_business_obj_id tekkn-id.
            mmpur_metafield MMMFD_ACCOUNTINGS.
          endif.
          mmpur_message_forced 'E' 'ZE' '777' '' '' '' ''.
        endloop.
      endloop.

  • Back again - set focus

    Hi again,
    I've been struggling with setting focus on each instance of a field within a repeating subform. My subform is limited to 5 instances. Min of 1.
    As the user exits the only textfield in the subform, I have a new instance creating. I want the focus set to the new instance but I have not been able to get anything to work. My latest attempt has been to try to pass a count using the instancemanager to a variable in the setfocus string.
    Here is what I have thus far. I know I need to resolve the node but that process is confusing the heck out of me. I've read and re-read everything I've been able to find but I havent been able to wrap my head around that part successfully.
    Can anyone point me in the correct direction or suggest a better solutions? TIA!
    form1.Account_Client_Information.Long_Title.Account_Long_Title::exit - (JavaScript, client)
    var oSubform = xfa.resolveNode("Long_Title");
    var oNewInstance = oSubform.instanceManager.addInstance(1);
    xfa.form.recalculate(1);
    var count = (this.instanceManager.count)
    xfa.host.messageBox("Text Field Index in new Subform: " + count);
    var vfocindex = xfa.resolveNode("Account_Long_Title[count]");
    xfa.host.setFocus(vfocindex);

    Hi,
    The addInstance method will return the subform that you want so you only need to do;
    var oNewInstance = Subform1.instanceManager.addInstance(1);
    xfa.host.setFocus(oNewInstance.Account_Long_Title)
    Regards
    Bruce

  • How to set focus in text box at server side

    Hi,
    I have small problem , i have a text box in form , which is get validated at server side in servlet , if it found some thing wrong then it throws exception , i want that when an exception is thrown it should set focus for that perticular text box. so what should i write to perform such a activity.

    Get hold of the element ID in the servlet (and keep the code conventions) and print it out to some Javascript function which does a focus during the onload.
    There's an example of focus/highlight using JSP/Servlet/Javascript in this article: [http://balusc.blogspot.com/2008/07/dao-tutorial-use-in-jspservlet.html]. Also see the screenshots at the very bottom.

  • Setting focus in a PDF form

    Hi,
    I'm trying to move a cursor to a particular field based on certain conditions using JavaScript. The method I am using is xfa.host.setFocus("fldTest"); in the initialize event. For some reason the focus isn't getting set to fldTest, but when I first hit tab it goes into the first field that is in the tab order. Is there any way around this?
    Thanks,
    Chad

    You might want to check the reference path of the field that you want to set focus on.
    Ex: xfa.host.setFocus("form1.page1.subform1.TextField1");

  • Setting focus to new instance of a field...need help.

    Hi there,
    I have a flowed form which consists of multiple subforms. I have one subform which is basically one textfield that is set to a min of 1 and a max of 5.
    These are to correspond to fields in our system of record that have 5 fields for company long name with a 36 character field limit.
    I've got the limits set up just fine and I have added simple script to add a new instance when the user exits the field.
    The focus goes to the next field set in the tab order but what I want is the focus set on the new instance of field created but I have not been able to find an example of how to do that.
    Any suggestions would be greatly appreciated. Thanks!

    Well,
    I've been reading and trying various things but cant get anything to work like I want it to.
    The sample provided works for 2 iterations but mine has to do this for up to 5 instances. I have not been able to figure out how to get this to work.
    Anyone have any additional suggestions?
    btw...here is my modified version. ES2 is whay I'm using.
    Long_Title.occur.max = "5";
    var oSubform = xfa.resolveNode("Long_Title");
    var oNewInstance = oSubform.instanceManager.addInstance(1); // I think you probably managed this first part better than here
    xfa.form.recalculate(1); // I THINK THIS IS IMPORTANT
    var count = (this.Long_Title.nodes.length)
    var testIndex = oNewInstance.Account_Long_Title.index;
    xfa.host.messageBox("Text Field Index in new Subform: " + count); // TextField1 will conserve index 0 because it is the only textfield in the new Sub1
    var NEW_TEXTFIELD = xfa.resolveNode("Long_Title[1].Account_Long_Title[0]"); // However, Sub1 gets index 1 because it is not alone any more
    xfa.host.setFocus(NEW_TEXTFIELD); // This actually sets focus on the newly created instance of TextField1 (actually Sub1 instance)

  • Change and set Focus of window

    HI
    Guys
    I have encountered a problem while setting focus of my application's windows.
    i found the way i.e. by
    public void windowGainedFocus(WindowEvent wgf) {          
              if(this.isActive()){
                   VWM.theVWMDetailWindow.setAlwaysOnTop(true);
                   System.out.println(wgf.getSource());
         }by doing that there is errors came.....
    but there is no effect on the window theVWMDetailWindow to have operation setAlwaysOnTop successfully functoned
    Please help me out
    Thanks

    HI
    Yannix
    actually , i want to get the focus of my application window
    and then perform the action on it..
    The case is that::
    I have a main window..then on it a menu bar...
    when i click on one of the menu option then another separate window will be opened....and many other windows on different menu options....
    SO now i want to control their focus..... rite
    when my main window's focus lost means if i select another application
    another related opened window's must also lost their focus at that time.and when i came back to the main window another window's already opened must be on top.....
    So could you please suggest me some way , some solution to solve this
    Thanks

  • Setting Focus In Textarea

    Ok,
    I have a java program I've bundled into a jar and then packaged into a Win32 executable. I have windows associate a particular filetype (.wri) to my program.
    When I click a .wri file and open it, it loads data to a textarea. Now when I scroll down the textarea and finally click in the textarea, it resets me to the top of the textarea. Now, if I open the executable first, then go through the program to open a .wri file, I can scroll down to the bottom of the textarea, click in the textarea and I do not get reset to the beginning. I need a way to prevent the resetting of the textarea. I've tried using some of the Window methods for setting Focus, but none seem to work. Any ideas why this is happening via the one way and not the other. I'm open to any ideas. This known bug frustrates many because the .wri files being opened have over 1000 lines of text. Thanks in advance!

    i think yu can use setFocus by using lostFocus event.
    use Focuslost()

  • Setting Focus to datagrid next Item renderer column

    Hi
    I am having spark datagrid with 7 colum, I am facing problem to set focus for item renderer element.
    Below is my datagrid, when user enter some text in text input and press TAB key, I want trade button to be in focus. and from trade column Tab key press I want delete button to be in focus.
    I tried giving
    tabEnabled="true" tabChildren="false" tabFocusEnabled="true" editable="true" hasFocusableChildren="true"
    for datagrid.
    Also i tried giving selectedCell
    var _focusedCell:Object = new Object();
                                                                _focusedCell.rowIndex = dgTermDepo.selectedIndex;
                                                                _focusedCell.columnIndex = 5;
                                                                dg.selectedCell = _focusedCell as CellPosition;
    but nothing is working, I know I am missing some logic or property, Please suggest me on this
    Thanks
    Sonu

    You need to dig down into the event object and look at the
    listData.
    public function clickMe(e : MouseEvent ):void {
    var rowIndex : int = e.currentTarget.listData.rowIndex
    var colIndex : int = e.currentTarget.listData.columnIndex
    if the listData object is null when you try this you may need
    to add the following methods as overrides to the renderer or create
    a base renderer and extend all your renderers from the base
    renderer so that you always override these methods.
    [Bindable("dataChange")]
    private var _listData : BaseListData;
    override public function get listData() : BaseListData {
    return _listData;
    override public function set listData( value : BaseListData )
    : void {
    _listData = value;
    }

Maybe you are looking for