Setting for 5ghz n only - Possible?

Using TIme Capsule. Settings right now of n 2.4 and 5ghz Name st under Wirelss options.
I have no need for the 2.4 side any longer, but do not see the ability for just a setting of N 5Ghz only.
Not possible?
Thanks

Correct it is not possible.. Apple since introducing the dual band simultaneous model.. has no provision to turn off a wireless band..
You can on older ones set it to G wireless.. just change the mode.. and fix it to the most out of the way channel you can.

Similar Messages

  • Unable to connect to Linksys E3000 when set to 5GHz "N" only Network mode

    I've not been able to connect to my to Linksys E3000 when set to 5GHz "N" only Network mode.  Connections to the 5GHz can only be done in mixed mode.  I do not need to have A-Mode enabled, so I do not wish to use mixed.
    Tested with a variety of adaptors, most recently my  Intel® Centrino® Ultimate-N 6300 .

    Thank you for your response.
    I have Win 7 Ultimate.
    Wireless NIC: Intel® Centrino® Ultimate-N 6300
    Latest Driver: 14.0.1.2
    I took your suggestions, and verified the firmware is current.
    Channel Width:    40
    Channel:    161
    Also, I have turned security off for testing.
    If Network Mode = N Only, I see and can 'connect', but then get the error below:
    If "Network Mode:" = Mixed, there is a connection, but Status-> Local->DHCP Clients verifies it as "A":
    w520 Wireless-A 172.222.1.33 00:xx:x7:AE:xx::0C 23:59:45
    I have the latest firmware
      Firmware Version: 1.0.04 build 6  Dec 6, 2010  
      Firmware Verification: 1ad912eecfd4c2226624cc8ff9b43820 
    The error from Windows is non-specific:

  • EA2700: Unable to set channel width setting for 5Ghz

    Hi,
    I am trying to set 40MHz as the channel width for 5GHz network on my Linksys EA2700 and it always remains in "auto"! Am running the latesting firmware. Also i tried factory reset->Restore and set again.
    No luck! any suggestions? Did it work for anybody?
    Thank you

    Thanks for the info. My 5GHz is set in 'N' only mode. When I set the channel to 161 it displays 40GHz however the speed drops to 30Mbps after a minutes.
    How was your experience?

  • User Permissions for certain pages only possible?

    I have a client interested in BC but I need to know if they can assign user edit permissions for certain pages to certain users? For example lets say they have pages  A B C D E F and they want Tom to be able to edit A B & C but not D E F and they need Sally to be able to edit D E & F but not A B & C. Is this possible with BC?

    Hi,
    The option is to use and set a workflow for "content approval" to each page.
    Site settings -> manage workflows
    "You can attach a workflow approval process to any web page or template. When an approval is attached to a web page or template, then all changes must be approved by predesignated users of the system before they go live. To attach a workflow to an item, click on the 'More Options' link and choose a workflow."
    Site manager -> pages -> more options
    Hope this helps!
    -Sidney

  • SPA303 Message Waiting Indicator for specific line only

    I have an SPA303 configured with 2 lines (extensions).
    I want the message waiting indicator to only show for line 2, not line 1.
    I've tried going to Advanced, Voice, Ext1 and setting "Message Waiting" to No
    and for Ext2 setting it to Yes. 
    Hit "Submit All Changes"
    After phone reboots, Ext1 still says Yes, and Ext2 still says No.  I cant seem to change these.
    Is this the correct way to accomplish my request?

    I have no SPA303 here, but it is almost identical hardware and exactly the same firmware (I assume you have the latest) as other SPA[35]0x models. I have no problem to set Message Waiting independently. I can't repeat the behavior you described.
    So either your setting is overwritten by remote provisioning, or it's a complex issue related to overall configuration of phone.
    Can you change setting for one extension only ? Have you provisioning configured ? Can you turn on syslog&debug and capture output ?
    It may or may not help to analyze the issue.
    By the way, wrong forum. Your question have nothing to do with XML application. (Updated: has been moved to the correct one)

  • Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

    Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

    Hi Bob,
    I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
    Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

  • Recruitment Faxing & e-mailing only possible for standard text in SAPscript

    Hi,
    I am using the old recruitment module PA-RC ion ECC6 and I am trying to send an email to an applicant. When I try and do this I get message "Faxing and e-mailing only possible for standard text in SAPscript". In feature WPROC I am set up to use RTF. Is there no way to send RTF emails? Do I need to create SapScripts for anything that I may possibly want to email?
    Thanks
    Tom

    Apparently only able to carry this out in SAPScript

  • I have an iPhone and iPad on the same account.  I gave my iPad to my daughter.  Can I set up a new account for my iPhone only so I can back up photos, etc, in privacy?

    I have an iPhone and iPad on the same account.  I gave my iPad to my daughter.  Can I set up a new account for my iPhone only so I can back up photos, etc, in privacy?

    If you set up a new account on your iPhone you won't have access to all the data associated with the prior Apple ID.

  • I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have had this same problem for weeks now with my 4S.  I just got a new 5S after being extremely frustrated and the same thing - no sounds.  After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?"  I didn't even know such a function existed.  Upon looking that was exactly the issue.
    To resolve, go to Settings> Do Not Disturb> Manual.  If it is green, turn it off.  You will now get phone calls and text alerts.
    This functionality is also on your quick access utility menu (slide up menu).  I assume this is how it was enabled on my phone.
    I will post on other sites since I searched for weeks for this solution and didn't see it anywhere.  Good luck!

  • "Posting with reference to pur. order only possible for integrated whse"

    When I try posting GR with mvmt type 101 wrt PO  I am receiving the error “Posting with reference to pur. order only possible for integrated whse”
    The scenario is  storage lcation is maintained  with the external warehouse management .
    Is there anything i need to maintain warehouse as decentralised one or should i need to maintain any moment types or is there anything else i should maintain in the customisation.
    Kindly guide me regarding this as I am new to WM ,Thanks in advance.

    Hi ,
    In my case i have not maintained as decentralised one.
    also the thing is  there is no warehouse house  data managed over here .the requirement is when connected to extended warehouse  the system has to create inspection lot after the GR has done ,
    whereas in normal scenario everything is normal,
    can you please suggest what should be done in this case.
    Also if possible can you please tell me what from the scratch so that it will be helpful to come through .

  • Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

    The javescript in below link works for me.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
    However, I'd like to set default user for people picker only when user checks a checkbox. 
    I am new to  development. Could you please help me on this requirement ?
    Thank you very much. 

    Hello,
    Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
    http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Is it possible to create an EQ setting (manual) in iTunes that can be stored on an iPod nano as an addition to the 22 EQ onpresets?  I want to use a manual setting for my headphones without applying the setting to each song.

    Hi.  Is it possible to create an EQ setting (manual) in iTunes that can be stored on an ipod nano as an addition to the 22 EQ presets?  I want to use a manual setting for my headphones without applying the EQ to all the individual songs.  I'd use a different EQ for my dock.
    Thanks.
    Paul St

    A quick look at the DM1 site shows that it works with Audiocopy.

  • Set a User Status for Quality Notifications only if they are "Activated".

    Hello experts:
    I need to be able to set a User Status for Quality Notifications only if they are "Activated".
    When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification".  Initially, the only difference between the inactive "Defect Notification" and the active  "Quality Notification" is that  the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
    So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
    I checked the business rules for status DEFR and found that the following processes clear this status
      PMM1 -  Postpone Notification
      PMM2 -  Put Notification In Process
      PMM3 -  Assign Order
      PMM6 -  Put Notification In Process Again
    Any Ideas ?

    Perhaps some additional information would help you understand what I need to do.
    For notification type F3, we are recording all defects found in production.
    Most of these are expected defects that result in a minor reduction in yield.
    For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
    However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
    When this happens we manually activate the notification and assign tasks to find and correct the cause.
    It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
    The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing.  I therefore want to use the Activation event as the trigger to set my user status.

  • Error message 'Display only possible for print documents'

    Hi All,
    This issue is with the transaction code ME21N. When the user clicks on PRINT PREVIEW  it gives an error of 'Display only possible for print documents'. When the user clicks the MESSAGES tab and then COMMUNICATION METHOD tab it gives an error 'No communication data has been defined for transmission medium 6'. The vendor is not getting the order. Does anyone has any idea of what these error messages mean and where should I look further?
    Thank you,
    Regards,
    Shanu

    Hi
    this seems tobe relates to print program "" ask your ABABer what program he has written to send the PO to vendor your problam willbe solved.
    the moment you give the print it will ask the printer by  default LP01 then print immediately check you need to do that.then beground print program and partner you need check. whether this out type you have assigned to this partner or not (vendor).  check complecte condition technic.diffnettly it will works.
    i hope you have understood
    thanks &Regards

  • 2EETW169 no connect possible: "invalid values set for DIR_LIBRARY

    uapkb2dc:ss2adm 55% R3trans -d
    This is R3trans version 6.05 (release 46D - 27.03.05 - 14:30:00).
    2EETW169 no connect possible: "invalid values set for DIR_LIBRARY '/usr/sap/SS2/SYS/exe/run' or dbms_type 'ORA'"
    R3trans finished (0012).
    trans.log==>
    uapkb2dc:ss2adm 51% more trans.log
    4 ETW000 R3trans version 6.05 (release 46D - 27.03.05 - 14:30:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -x
    4 ETW000 date&time   : 27.07.2007 - 13:18:37
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [developertra,00000]  Fri Jul 27 13:18:37 2007                             713  0.000713
    4 ETW000  [developertra,00000]  db_con_init called                                    88  0.000801
    4 ETW000  [developertra,00000]  create_con (con_name=R/3)                            162  0.000963
    4 ETW000  [developertra,00000]  Loading DB library '/usr/sap/SS2/SYS/exe/run/dboraslib.so' ...
    4 ETW000                                                                             227  0.001190
    4 ETW000  [dlux.c      ,00000]  *** ERROR => DlLoadLib: ld.so.1: R3trans: fatal: libclntsh.so.9.0: open failed: No such file o
    r directory -> DLENOACCESS (0,Error 0)
    4 ETW000                                                                            3140  0.004330
    4 ETW000  [dbcon.c     ,00000]  *** ERROR => Couldn't load library '/usr/sap/SS2/SYS/exe/run/dboraslib.so'
    4 ETW000                                                                             139  0.004469
    2EETW169 no connect possible: "invalid values set for DIR_LIBRARY '/usr/sap/SS2/SYS/exe/run' or dbms_type 'ORA'"
    pls some one help me out to over come this....
    Regards,
    Nani.

    Hello,
    it could be working now, but <b>that</b> setting is wrong
    ORA_NLS33 is an environment variable used by Oracle < 10g
    But you set it to point to a 10g directory that does <b>NOT</b> exist on a standard Oracle 10g installation.
    That makes me think that your oracle client 9.2.0.<x> is not properly installed.

Maybe you are looking for