Setting for changing resolution of screen capture??

I have a retina display iPad, but screen grabs come out really low res (44k). Is there a setting somewhere to fix this? I need to print screen grabs for an instruction manual and they look horrible.

I have a retina display iPad, but screen grabs come out really low res (44k). Is there a setting somewhere to fix this? I need to print screen grabs for an instruction manual and they look horrible.

Similar Messages

  • Which setting should I have my apple tv set for picture resolution/quality it takes like a whole day for a movie to download before we can watch it

    Which setting should I have my apple tv set for picture resolution/quality as it can take a whole day to download a movie before we can watch it??

    The video/audio display settings should set automatically for the best your TV can handle (720p AppleTV2, 1080p AppleTV3).
    The download resolution for rentals or playback of purchases from the cloud is set in settings for iTunes store.
    Sounds as though you have slow internet.  For near instant streaming of video from iTunes store you need around:
    Standard Definition     2.5 Mbps
    720p HD                    6 Mbps
    1080p HD                  8 Mbps
    Any slower for a given quality setting and the movie has to buffer as it can't keep up in real time.  This might be a few minutes if close to the rated speed or many hours, even overnight.
    As pcd251s suggests you could test internet speed (speedtest.net on a computer for example).  If that is fine, sometimes the LAN if on wifi can be extremely slow in certain locations - ethernet connections would troubleshoot that.
    Slow internet is the common issue here.  AppleTV does not have permanent storage and using it to play other content or browse trailers while a rental is buffering can reset the buffering process.   In such cases you might be better off planning in advance, renting in iTunes, letting the whole thing FULLY download and it will then be available across teh LAN to stream from computer to AppleTV under Computers>iTunes library name>Rentals.
    AC

  • When exporting from .pdf to powerpoint, misinterprets image as table some of the time. Anyway to adjust setting for finer resolution?

    When exporting from .pdf to powerpoint, misinterprets image as table some of the time. Anyway to adjust setting for finer resolution?

    Hi Jim,
    Could you please let me know what version of Acrobat and OS are you using.
    Have you tried repairing Acrobat?
    Hope to hear from you.
    Regards,
    Anubha

  • How do I change picture resolution from screen capture?

    If I want to take the image on the screen in Encore CS5 and save it as a photoshop picture the resolution is 70 DPI.  Is there any way to change this resolution?  I would like sharper pictures if possible, 100 DPI to 200 DPI if this can be done.
    Encore CS5
    Core 4 2.4 ghz processor
    6 GB Ram
    700 GB free on hard drive
    Windows 7 64 bit

    I completely agree with your goal - getting as a good a resolution print as possible.  But your focus on dpi for the capture of a frame will not help you.
    Kind of like scanning an image.  If you are going to blow it up later you want to scan at higher resolutions than if you don't.  There is of course image quality versus file size issues, etc. etc. but at least I would have the option to change resolutions on capture.
    Scanning at a higher resolution adds more pixels.  So, for example, scanning a finely detailed 7.2 x 4.8 inch image at 300 dpi produces 2160 x 1440 pixels.  Scan a grainy photograph similarly, and it will be 2160 x 1440 and look lousy.  Use a 5 megapixel camera to shoot the original scene, you've got more pixels.  If you have only the SD video image, all you have is the 720 x 480 pixel image.  It doesn't matter how you set the dpi on capture, just that you capture all 720 x 480 pixels.
    In Premier Pro CS5 and Encore CS5 the image size is 10 inches by 6.667 inches and the resolution is 72 pixels/inch.
    Pulling from womble the image size is 7.2 inches by 4.8 inches and the resolution is 100 pixels/inch.
    The part you are not listing is the fact that for each of those the pixel size is 720x480.  As long as you capture the 720 x 480, the resolution of the image is not improved by flagging it as 72 dpi or 100 dpi.  You can change that in photoshop for either of those captures, and you get a different print size, but no more or less pixels.
    In either case, re-sizing the image in photoshop doesn't change the pixels/inch resolution.  I want to capture the original image in as good resolution as possible rather than having to correct it after capture.
    "As good resolution as possible" is 720 x 480.

  • Color changes (darkens) in screen capture - color sync gamma setting?

    I encountered this weird effect that the color darkens when I did a screen capture in one Mac but not the other.
    In fact, it darkens more with shift-ctrl-cmd-4 (selection capture) than with shift-ctrl-cmd-3 (whole screen capture).
    The knowledge base mentioned the gamma setting in http://support.apple.com/kb/ht3712 but the color darkens in the clipboard, so there is no way to change the color sync if it is not a file. I tried to re-calibrate my display using different gamma setting, but it didn't change any color.
    In my other Mac, I can do a screen capture and the color is preserved as is. It is only in one Mac that did this. The color darkens so much that it practically becomes black-and-white.
    Any suggestion would help. I think it has something to do with the color sync profile setting.

    I found out that the darkening of the color in screen capture is caused by screenshot captured into jpeg. The darkening happens when the lines are thin, due to the averaging effect of jpeg. If the lines are thick, then the change in color is not apparent.
    Now, the problem is, I can't change screen capture to capture in png. I used Tinker Tool, and deleted com.apple.screencapture.plist , nothing would change it back to capture in png.

  • User exists for changing the selection screen of the transaction CS11

    Hi,
    I want to change the selection screen of the transaction cs11 and modify the ALV output.
    I searched the old forums but not got satisfactry results.
    I want to change the plant and material from the parameter to the select option.
    i dont want to copy the transaction for the zcs11.
    any suggestion on this ?
    Regards,
    udupi

    one more requirement i have is that, i need to remove all the header fields such as material , plant etc and place that field in the item level. i can use the user exists PCSD0002 for the adding the customer field in the item. but how can i removed the header level field such as plant and material. whether we have any user exits for that?

  • FCProp 6: Which setting for the best quality encoding (capture)?

    Hi everybody,
    i am producing contents from HDV cam (Sony Z1) and i just saw one of my colleagues (journalist too) working on Adobe Premiere having a really better final report than my one (using the same tape).
    i just wonder if someone could explain what would be the best workflow to get the best quality on a standard DVD (not the next generation)?
    our reports are based on Fashion, so we are using some filters for some of the images. i heared about the RS422 or something like that wich is the new aple encoder ? am i right ? is this what should be used for the capture and rendering files ?
    what about the export encoding setting? movies are all under 10min duration
    Thank you very much for your hightlights
    Sam

    I use FCPX/iDVD regularly to make DVDs.  Workflow is to edit 1080i project in FCPX, add chapter markers, and export video using Share -> Master File (default) with no changes.
    The resulting .mov file is then imported to iDVD with various themes, etc. and "Save as Disk Image" is used to create a burnable file for creating DVDs with Disk Utility.
    Be aware that the titling of chapter markers is flaky and you may have to retitle them in iDVD as the name from FCPX is not always saved.  No big deal.
    I also use MPEG Streamc;ip to create a 128//720 mp4 file which goes readily into iTunes and then i synced to my iPad for portable show and tell.  Have to confess that I have Compressor too, but have never used it and from following the forums get the impression that it's not easy to use.  MS works fine for my limited purposes

  • Photo Recall Effect -- Changing Part of Screen Captured

    Everything I've tried moves the photo around the screen, but doesn't change what part of the screen appears in the photo. I couldn't find instructions for this in the FCP PDF manual. Does anyone know how to do this? Am I supposed to crop the scene first and then apply the effect or something? Thank you.

    There are two styles in Photo Recall: 1) Classic in which the entire storyline is scaled down to fit inside the picture frame; and 2) Instant in which a small portion of the center of the storyline is fit inside a "polaroid" style frame.
    In order to do what you want requires modifications in Motion...
    After nosing around for a couple of minutes, I realized that those modifications would be too difficult to explain here, so I did them myself and you can download the replacement here:
    http://sight-creations.com/fxexchange/PhotoRecallEnhanced.zip
    It's the exact (almost*) same with the following additions:
    The ability to Rotate the "photo" (the whole "effect")
    The ability to offset the image within the photo by X (Img X Offset) and  Y (Img Y Offset)
    The ability to relatively Scale (this is an offset from the original Scale parameter) the Image within the frame (-50% to 100% parameter setting - actual scale is not easily calculable because there is a difference between the Scaling of the Classic as opposed to the Instant built into the effect [~51% vs ~79%]).
    The ability to Rotate the image inside the photo frame (this is a separate rotation than the photo rotation) from -180° to 180° (if you want more - you'll need to modify this in Motion -- you'll find the parameter settings in the Img Rotation Rig Widget.)
    *I had to replace the "Simple Border" filter applied to the "Classic" inset with two Rectangle shapes: one as an outline for the border and one to create a Mask so that the photo could be maneuvered inside the frame. This keeps this variation of the Effect from being exactly the same as the original. If you don't like the "border" width, or you would like to add that as a parameter for the Effect, you can do so in Motion.
    Hope this helps you out.

  • Correct Setting for changing anamorphic 16:9 to 4:3 in motion tab...

    Hi there,
    I'm new to FCP.
    I'm editing a mainly 4:3 sequence, with a couple source clips in Anamorphic 16:9.
    By searching the forums I realise I can change the aspect ratio of these source clips in the motion tab.
    However, what is the right number on the Aspect ratio slider to correctly change 16:9 ana to 4:3 (letterboxed)?
    Cheers.

    Welcome!
    However, what is the right number on the Aspect ratio slider to correctly change 16:9 ana to 4:3 (letterboxed)?
    If I understand correctly, you want to letterbox your anamorphic 16:9 in a 4:3 sequence. Under the Motion tab, you should change the Distort setting to either +33 or -33, I can't remember off hand, but you'll know which one it is when you try.
    tim

  • Need help in screen capturing for flash CS4 AS3

    Hi, i need help!!!!!!!!!!!!!!!!!!!!!! URGENT!
    I am currently doing Augmented Reality.
    I got my marker to detect my model but my problem now is how to screen capture the content that is in swf.
    (As in capture the dae model shown in the comp not from webcam.)
    & also i just want to capture the swf window not the whole desktop.
    I read online, they say its impossible?
    Or is it possible to call screen capture function in javascript to flash CS4? (LIke external data)
    (Moreover, does anyone know how to detect multiple dae models with different markers?)
    Anyone can help??? Thanks in adv!!

    My current program (Flash CS4, AS3) only can capture what the webcam sees.
    How do i change it to screen capture (something like print screen) with my .DAE models?
    In the case, when i click on the capture button, it print screen.
    Here's part of the code that capture what the webcam sees.
    private function captureImage(e:MouseEvent):void
       bmd.draw(stage);
       bmp = new Bitmap(bmd);
       bmp.x = 140;
       bmp.y = 40;
       addChild(bmp);
       capture.visible = false;
       saveButton.visible = true;
       discardButton.visible = true;
    Really really need help! URGENT!
    Thanks!

  • Changing Default Screen Capture Format in ARD 3.3

    Does anyone know how to change the default screen capture format in ARD from PNG to JPG?
    Thank you.
    Kevin

    Download and use Screenshots Preference Pane:
    http://www.ego-systems.com/Products/screenshotsprefpane.html
    It's free and easy, gives you about a dozen options on how to save the shot and allows you to change where it's saved to.
    I also use Capture Me:
    http://www.chimoosoft.com/captureme.html
    Best screen capture utility I've tried, you can save each screen shot in any format you want or have it go. It also works as a great picture sticky because the windows floats above other windows. It's also free,
    Kevin
    http://www.bearbyte.blogspot.com/

  • Does creative cloud include any software for HD video screen capture?

    Does creative cloud include any software for HD video screen capture? I know that Captivate is not offered but are there other software applications available that do the same job? I am not wanting to make tutorials but I am a filmmaker wanting to integrate sequences with screen capture (which I will edit on Premiere)

    Thanks Brian,
    Spent some time yesterday doing research on this. There are good reviews and bad reviews for just about every screen capture application out there it seems.
    The top-ten reviews gave their gold medal to CamVerce, which I'll probably buy today.
    http://video-capture-software-review.toptenreviews.com/
    Yesterday I bought the Sonne Screen video which is rated 5th on the top-ten site. (I figured as I'm going to be editing on premiere I shoudn't need to pay for extra editing packages and as I'm not using it to create tutorials I really just want a good quality screen capture for Windows 8). However, I'm not really happy with the image quality on playback and I'm finding the technical assistance really poor from Sonne. I still haven't received an email confirmation from them.
    The others that I thought sounded right for me were WM Capture (though the top-ten review had a few negative things to say about it).
    Tried a couple of the free ones also. EZvid is very popular.
    Will see how I go and let you know. I'm sure this is very subjective and I'm probably not being as clear as I need to be about purpose of use.

  • Why can't I enlarge safari bar and bookmarks bar so the print is larger.  I can only do this if I change resolution on display.  I do not want to make my 27" smaller.  Any comments?

    After just installing Mountain Lion on mid 2011 iMac 27" I find it does not allow increasing size of font for Safari bar and Bookmarks bar.  The print is so small it is difficult to see.  I can change resolution of screen but the the size of the screen becomes smaller.  Not what I had in mind when I bought this iMac.  Is there any fix out there and is Apple working on this problem?  Any comments would be appreciated.  Thanks.

    Safari – Enlarge browsers toolbar text
    Firefox

  • Screen Capture file location?

    Suddenly my screen captures are sent only to the clipboard instead of the desktop as they used to. How can I change that back? I'm using ShiftCtrl+Cmd4 or ShiftCtrl+Cmd3.
    Also, where would you change where the screen capture files ends up?

    You're pushing too many buttons. The additional ctrl button copies to the clipboard.
    See the Preference panels>Keyboard>keyboard Shortcuts for the list of buttons.

  • Screen capture to pdf

    how do I change the default screen capture setting (CommandShift4) from .PNG to .PDF format?

    In Terminal, type the following:
    defaults write com.apple.screencapture type pdf
    and log out and in again.
    Matt

Maybe you are looking for