Setting for Internet

HI
I have several 1-3 minute clips of bands playing in clubs and I cannot get a good compression with good sound quality and video that doesn't interlace. Whenever I try to encode it as a mp4 compressor starts up and then with a split second gives me a fail message? I hear that mp4 is the best setting for high quality clips on the internet but I just cannot get compressor to do it. I would like to have the clips to be 5- 10 mb in sixe, does anyone have any settings they could reccomend? Thanks

Hi,
To change proxy server settings.
Click the Tools button, and then click Internet Options.
Click the Connections tab, and then click LAN settings.
uncheck  the Use a proxy server for your LAN check box..
Sudheer MCP,MCSA(Server 2012)

Similar Messages

  • Flash sound setting for internet publishing

    Dear Friends,
    iam creating elearning lessons and trying to upload in internet. Please advice me what sound setting should i keep. Now iam keeping in publish setting, 24kbps. with "convert stereo to mono". But iam getting disturbance in the swf output. The mp3 sound iam inserting is very clear (format is 16bit, stereo, 44100hz). But iam getting disturbance in output.
    Pls advice me what is the correct sound setting for web based swf lessons.
    Thanks in advance,
    Syed

    Dear Mr.kglad,
    Thanks for the reply. Native settings means, my mp3 vo is 16 bit, stereo, 44100hz for this what should i keep in publish settings? pls advice me. for ur info, this 16bit stereo, i have made, actually they recorded as 16bit, mono. Now iam importing as stereo.
    my issue is same as http://www.newgrounds.com/portal/view/553963 this pls check this link. This is not my lesson. while browcing i foudn this. this same as my problem. when i listen in fla file its good.. after press control enter and made as swf iam geting the distubance and bad quality in vo.
    thanks and regards,
    syed

  • What need more setting for internet explorer

    Hi All,
    My application developed in 10g developer suit ,Application server is configured. The url which I am using run in mozila 3 , If i ipen it
    in simple internet explore, It did not show. Please let me know which changes required to run this url in internet explorer.
    Thanks

    Forms 10g supported ONLY by IE 6 OR IE 7 with OS XP This is not exactly correct. Please be careful when making statement such as this. The client certified platform information can be found here:
    <blockquote>http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA</blockquote>
    Determining exactly which JRE (or Jinitiator) version will be used is partially determined by the following settings in formsweb.cfg. In most cases, if you look at them carefully you should be able to determine what the values you need should be. The following example will show how to use JRE 1.6.0_33. This will require Forms 10.1.2.3 and IE8 or FF3.5
    baseHTMLJInitiator=basejpi.htm
    jpi_classid=clsid:CAFEEFAC-0016-0000-0033-ABCDEFFEDCBA
    jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_33
    # The complete list of values for jpi_codebase can be found here:
    # http://www.oracle.com/technetwork/java/javase/autodownload-140472.html
    jpi_codebase=http://javadl-esd.sun.com/update/1.6.0/jinstall-6u33-windows-i586.cab#Version=1,6,0,33
    jpi_download_page=http://www.oracle.com/technetwork/java/javase/downloads.

  • Export Setting for Internet... Which one?

    I am exporting from LiveType. When I import into iMovie, the font looks much lighter, and the shadow more pronounced.
    The trailer is going to be published on the internet. Which export settings etc. do I choose? They are all greek to me.
    Thanks for your help. (Sorry... I'm an old analog editor!)

    Well, Flash is the most obiquitous format, but you can't export it from Apple software, you need third party software to do this... Telestream's Episode Pro, or Sorenson's pro Flash codec works nicely as well.
    Next IMHO, would be h.264, but this presumes the viewer will have installed QuickTime 7 (there's one for macs and one for PC's too and it's free). The presets work quite well for this, and what you need to decide is the bit rate. Assuming your viewers will have a fast connection, you can use the higher bit rates. It's a matter of deciding how fat a stream you can deal with ( the fatter the better quality, however the slower it downloads of course)
    Most of the world is PC's so if your viewers are likely to be on that platform, then WMF's might make the most sense, but again, you'll need third party software to make them. Flip4Mac seems to be the preferred software here.
    Jerry

  • Proxy setting for Internet Explorer

    Recently purchased new CPU with Windows 8.1. I am not able to access Explorer.  I get an error message about proxy settings. How do I change this?

    Hi,
    To change proxy server settings.
    Click the Tools button, and then click Internet Options.
    Click the Connections tab, and then click LAN settings.
    uncheck  the Use a proxy server for your LAN check box..
    Sudheer MCP,MCSA(Server 2012)

  • How to make advance setting for internet apple tv

    im strugling to connect my apple tv to the hotel wifi i must encode the password but before that i need to encod also the username which is not available from apple tv set up it only lead u to password.  `is there any other option to set up the wifi?

    You can not use ATV on WiFi networks that require a web signin if that is what is being asked.

  • I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    dont know what to do

  • Which minimul parameters of Internet explorer i have to set for portal ?

    Hi Experts,
    Which minimul parameters of Microsoft internet explorer(Version 6 & 7) i have to set for portal ?
    Thanks & Regards,
    Gurprit Bhatia

    Hi Gurprit,
    Checkout the below link on Internet Explorer 6:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/msie%2b6%2bbrowser%2bsettings%2bfor%2baccessing%2bsap%2bportals
    Also, as mentioned above on PAM, Internet Explorer 7.0 is supported since SP19 for the Netweaver 2004 environment
    https://websmp109.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200314690900000192&00200682500000003818=WBRPFM&00200682500000003853=Enterprise%20Portal
    Previous posts in SDN forum:
    Browser Setting in Portal
    Hope that helps.
    Ray

  • I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?

    I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?

    It depends upon how the other machines are connecting to your MBA:
    If the the other machines are also using wi-fi, they can connect directly to the wireless access point (router) without going through your MBA
    If the other machines are connecting to the MBA using ethernet you can share your wi-fi connection to them

  • I have a Verizon card for Internet service and am trying to set up my new iPad. During the setup iPad recognizes my wireless but can't connect.  Any suggestions?

    Updated product info .  Trying to set up Internet in new iPad using a Verizon wireless card.

    A wireless card won't help. For set up, you need to connect to a wireless router, or via cable to a computer running itunes.

  • Can I  set up Internet access for Mac book air

    I am able to set up wireless for my Mac book air but I am looking to set up internet (same as I have with my iPad).  Is it possible?

    Have you got Home Sharing set up (http://support.apple.com/kb/HT3819) ? i.e. he may be viewing the content from your computer, not on the actual iPad. If that is the case (which would explain to me him being able to access the videos via the iPod app), then the Restrictions settings that I've already mentioned should also work on that 'remote' content.
    Edit : your last reply appeared whilst I was typing/checking this. And no, the Videos/iPod apps can't be passcode protected, you will need to go back into Restrictions and remove the restriction, or if the films are only on your computer and not on the iPad itself you could turn off home sharing on the iPad whilst he's playing the games : Settings > iPod and tap on your account id and/or password on the right under Home Sharing and delete it/ them (re-enter them when you want to re-enable it).
    Message was edited by: King_Penguin

  • Setting up internet for ipad w/time capsule, but don't have internet to download airport app.  Now what

    Hi all -  Set up my time capsule and got the wi-fi working for my computer.  Now trying to set up internet on my new ipad and have seen that I need to download the airport app onto my ipad.  Problem is -- I don't have internet for my ipad so I can't download the app.  Advice?  (Other than . . . go somewhere w/internet)?  Thanks!

    You do not need the app. The TC can be setup and is setup from what you have stated.. the ipad should get internet as soon as it connects.
    If you have issues.. please try the following.. setting it up from your computer.
    Use SMB compatible name for wireless ie short no spaces. .pure alphanumeric.
    Use fixed radio channels.. as the ipad seems to not like auto rotating channels.. fix 2.4ghz to channel 1, 6, 11 in turn.. pick the one that works best.

  • Setting up a Router & Switch for internet access

    Hi all,
    I need help setting up internet access on my cisco router.
    It's a Cisco 2600, this is the setup.
    I have a Cisco 3560 switch, and 5 clients connects to this switch.
    I have one vlan defined VLAN 5.
    I have a trunk port between the router and the switch.
    My question is how to setup internet access between my switch and router?
    Please if you can send config commands? I am not that fimiliar with router setup.
    I know I need to setup a routing protocol, but need to know the command for that.

    Hi,
    You need to nat on the 2600 router and you need a default route on the router.
    How is router connected to WAN ?
    Have you got multiple vlans on the switch? Is the switch doing routing or is it Layer2 ?
    Post your config so that we can give you the missing commands
    Regards
    Alain
    Don't forget to rate helpful posts.

  • Setting up Solaris for Internet Acodemcess via Cable M

    I am using Solaris 2.7 and wanted to know how to configure it to use my cable modem for Internet access. Where do I assign the gateway address in Solaris of the gateway/router I'm using?? I connect my cable modem to a router that's talking DHCP out to my LAN. I need to know how to configure Solaris for this type of configuration. I have looked everywhere and have not found how to configure.
    Any help would be greatly appreciated!!!

    so I'm thinking NAS.
    The experts in the iPhoto and Aperture forums strongly advise against trying to locate the image library on a NAS.
    If you are planning to use iPhoto or Aperture, you really should post in the support forum for the application that you are using. The links are just below.
    iPhoto for Mac          Aperture
    If you plan to use another application, check with the support folks for the program.

  • Oracle 9.2.0.3.0 patch set for windows - questions

    Hi!
    I have for that some questions. I have oracle 9.2.0.1.0 on a windows 2003 server running with one local database - no real apllication cluster.
    I don't understand which instructions I have to make for oracle upgrade?
    Must I also make the 3. instruction? Connect to databse prior and drop?
    Must I also make the post install action for my database?
    (startup migrate ...)
    what means at post install actions the following:
    'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
    My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?
    Thanks for help!
    1. When applying this patchset on Windows NT, XP or Windows 2000, you must log onto the system as a user with Administrative privileges
    (e.g. as a user which is a member of the local Administrators group).
    2. Unzip the downloaded patch set file into a new directory.
    3. Drop the xmlconcat function by running the following commands:
    drop public synonym xmlconcat;
    drop function xmlconcat;
    4. Shut down any existing Oracle Server instances in the ORACLE_HOME to be patched with normal or immediate priority. i.e.: Shutdown all instances (cleanly). Stop the database services, and stop all listener, agent and other Oracle processes running in or against the ORACLE_HOME to be installed into.
    5. Perform the following pre-install steps for Real Application Clusters (RAC) enviroments only:
    IN ADDITION TO STOPPING ALL ORACLE SERVICES IN THE ORACLE_HOME TO BE UPGRADED:
    If you are running in a RAC enviroment, stop the following Windows service(s)/devices(s) using the Net Stop command:
    Stop the Windows service named "OracleGSDService"
    Stop the Windows service named "OracleCMService9i".
    Stop the Windows device named "OraFenceService" (This Device does NOT show up as a Service in the Control Panel).
    For Example:
    C:\>net stop OracleGSDService
    C:\>net stop OracleCMService9i
    C:\>net stop OraFenceService
    Once the above steps have been performed on all the nodes of the cluster, you should then be able to upgrade the OSD components to the 9.2.0.3 versions. This can be accomplished by...
    xcopy all the files in the \Disk1\preinstall_rac\osd\*.* directory to the directory in which the OSD components were originally installed on all nodes(typically %SystemRoot%\system32\osd9i).
    Note: You may also be able to look in HKEY_LOCAL_MACHINE\Software\Oracle\OSD9i registry key to determine the directory in which the original OSD components were installed. Now the OSD components can be restarted on all the nodes in the cluster.
    C:\>net start OraFenceService
    C:\>net start OracleCMService9i
    C:\>net start OracleGSDService
    After all of the above steps have been completed on all the nodes of the cluster, you are now ready to proceed with the Oracle 9.2.0.3.0 patchset installation.
    6. Start the installer:
    If the current Installer version is less than 2.2.0.18.0 then download the Installer 2.2.0.18.0 from Oracle Metalink where it can be accessed with the bug number 2878462 and choosing the MS Windows NT/2000 Server platform, then run the setup.exe 2.2.0.18.0 from the C:\Program Files\Oracle\oui\install directory .
    7. You may install the Patch Set through either an interactive or a silent installation.
    To perform an interactive installation using the Oracle Universal Installer graphical interface:
    1. Start the installer from the newly installed OUI 2.2.0.18.0 by running the version of setup.exe located at C:\Program Files\Oracle\oui\install and verify
    that the version of the OUI GUI is 2.2.0.18.0 before proceeding.
    2. Follow the steps given below within the installer:
    1. On the Welcome screen, click the Next button. This will display the File Locations screen.
    2. Click the Browse button for the Source... entry field and navigate to the stage directory where you unpacked
    the Patch Set tar file.
    3. Select the products.jar file. Click the Next button
    The products file will be read and the installer will load the product definitions.
    The products to be loaded will be displayed (verify ORACLE_HOME setting for this first).
    4. Verify the products listed and then click on the Install button.
    5. Once the installation has completed successfully, it will display End of Installation. Click on Exit and confirm
    to exit the installer.
    To perform a silent installation requiring no user intervention:
    1. Copy the response file template provided in the response directory where you unpacked the Patch
    Set tar file.
    2. Edit the values for all fields labeled as "<Value Required>" according to the comments and examples
    in the template.
    3. From the unzipped patchset installation area, start the installer by running the setup executable passing
    as the last argument the full path of the response file template you have edited locally with your own
    value of ORACLE_HOME and FROM_LOCATION:
    setup.exe -silent -responseFile <full_path_to_your_response_file>
    Post Install Actions
    Execute these "Post Install Actions" only if you have one or more databases associated to the upgraded $ORACLE_HOME.
    Important Notes
    1: Java VM and XML DB Requirements
    Users who have JVM (Java enabled) or JVM and XDB installed on their 9.2.0.1 databases should make sure that the init.ora parameters shared_pool_size and java_pool_size are each 150 MB or more before running the catpatch.sql upgrade script. Failure to do so could result in an unrecoverable memory failure during running of the script. Please note that JVM and XML DB was shipped as part of the default 9.2.0.1 seed database and will be present unless the user explicitly installed a 9.2.0.1 instance without them.
    2: SYSTEM table space
    If you have JServer installed in the database, you should check to be sure there is at least 10M of free space in the SYSTEM table space before running these actions.
    3: Installing on Cluster Databases
    If you are applying this patch set to a cluster database, then set the CLUSTER_DATABASE initialization parameter to false. After the post-install actions are completed, you must set this initialization parameter back to true.
    To complete the installation of this patch set, you need to start up each database associated with the upgraded $ORACLE_HOME, start the database listener (e.g., lsnrctl start), login using SQL*Plus (e.g., sqlplus "/ as sysdba"), and run the following commands/scripts in order from $ORACLE_HOME within a MIGRATE session. If you are using the OLAP option, make sure that the database listener is up.
    startup migrate
    spool patch.log
    @rdbms/admin/catpatch.sql
    spool off
    Review the patch.log file for errors and re-run the catpatch script after correcting any problems
    shutdown
    startup
    This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this in multiprocessor machines:
    @rdbms/admin/utlrp.sql
    Execute the following if you use Oracle OLAP option:
    alter user olapsys identified by <password> account unlock
    connect olapsys/<password>
    @cwmlite/admin/cwm2awmd.sql
    exit
    Execute the following script only if you have version 9.2.0.1.0 of Oracle Internet Directory installed in your ORACLE_HOME. Make sure that the database and database listener are running and that all parameters are specified prior to running the script:
    $ORACLE_HOME/bin/oidpatchca.bat
    -connect <Connect String>
    -lsnrport <Listener Port>
    -systempwd <SYSTEM Password>
    -odspwd <ODS Password>
    -sudn <Super-User DN>
    -supwd <Super-User Password>
    -dippwd <Password to register DIP Server>
    Where:
    connect - Database connect string
    lsnrport - Database Listener port
    systempwd - Password of the database 'SYSTEM' user
    odspwd - Password of the database 'ODS' user
    sudn - Super-user DN
    supwd - Super-user Password
    dippwd - New password to register Directory Integration Server. This password must conform to the password policy in the OID server
    Execute the following steps only is you are using the RMAN catalog.:
    rman catalog <user/passwd@alias>
    upgrade catalog;
    upgrade catalog;

    I don't understand which instructions I have to make for oracle upgrade?
    -- You have to follow all the instructions mentioned
    (Just check for few if's for Cluster enabled, OID and OLAP databases. Perform these steps only if they apply)
    Must I also make the 3. instruction? Connect to databse prior and drop?
    -- Yes you should do
    Must I also make the post install action for my database?
    (startup migrate ...)
    -- Yes. Do run catpatch.sql .
    what means at post install actions the following:
    'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
    -- In this step make sure you do step 1
    1: Java VM and XML DB Requirements
    Otherwise catpatch.sql will fail.
    Do 2 and 3 only if applicable
    Chandar
    My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?

Maybe you are looking for