Setting for V-Mate Video Memory Card Recorder to v...

Hi,
Have just sent the enquiry reproduced below to Sandisk so that I can record video content with the correct settings for my N 95.
Can anyone advise?
Also, what compatible format provides the best quality? Should I select Mp4 or is there a better option. Thanks, Barry
Hi,
I have just purchased a V-Mate Video Memory Card Recorder (serial: VA060917127W) and want to use this to record video for viewing on a Nokia N 95 cell phone.
The N 95 model is not yet included in the list of standard RECORDING FORMAT SETTINGS.
Grateful if you could advise whether the settings can be done manually and - if so what the optimum settings are for recording and viewing video content for this device.
The V-Mate has been registered with Sandisk and my e-mail is
Many thanks,
Barry
Moderator Note: Removed email addresses. It is not advised to post personal information.
Message Edited by linwood on 18-Jan-2008 04:05 PM

Hello Nello,
For Voip i´m using the native bundle phone, and it works well, if your account is SIP. Actually the only problem for me is the Codec priority order, it start in G.711, and if takes around 85K, that takes some sensibility on band avaibility on tour network , special if you have an ADSL with with an upload close to 128K as me.
I have a note on this discution, but till now i dont have any clue to change this priotity!,
All the best
Dinis

Similar Messages

Best setting for encoding flv video?

What is the best, most universally accepted setting for encoding flv videos to be viewed over cable modem access?
Best,
Brian Russell
Gainesville Health & Fitness Centers
www.ghfc.com

I completely understand.
For print work, I did a lot of that with either Save_As, or Save_As_a_Copy in Photoshop. Then, they added Layer Comps, and that cut down on the work, but allowed me to have several "treatments."
Have not used that in PrPro though. I see the usefulness of the feature though.
Yeah, clients are fond of saying, "really appreciate you following all of my ideas, but I think I like what you had last week better... Can we go with it, but with these few extra changes?" Happens all too frequently. Lot easier now, than back in the old days, when one painted the cyc, set up the shot, and lit it, only to have the AD change the color of the cyc. When done, they'd often say, "liked that original color better. Let's tear it all down and re-paint to that." Now, I just change the color of the background digitally - a lot less painting!!!"
Thanks for that tip,
Hunt

Digital camera video = memory card

What is the best kind of memory card for videos ( making a video on a digital camera) & how many GBs should i consider on getting?

Hi TechGirl,
There is no specific type of memory card that works best for video, but I can suggest getting a memory card that has a higher storage capacity like a 4-8GB card with a high write speed. I hope this helps!
Thanks for posting,
Allan
Community Connector
Best Buy® Corporate
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

What is the best Compressor setting for best quality video playback on an iBook g4?

I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
Any suggestions are greatly appreciated! Thanks!

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

Cant find a proper setting for an HD Video

Hi:
I have a Samsung Full HD Pocket Camera, and cant find the proper Presents and exporting.
I choose the right resolution and fps, but when exporting the video dosent look fluid, its looks like a stop motion video.
The setting of the original video are:
.mp4
1920 x 1080
data speed 16412
total data speed 16543
FPs 29
Im using Premiere Pro CS4
I need to export it on .mp4
Hope you cand help me find the right presents and exports settings.
Regards
Diego

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainspector.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
The easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666

Manual setting for dynet ddr2 667 memory

i have msi p4m900m2 my problem is whenever i set the dram clock to auto or 667 in cmos my windows wont run and restart unexpectedly. but if i lower the clock to only 533 it will run. i just want to try to set the advanced dram configuration manually. what is the correct setting for dynet ddr2 667? 512mb
thanks

What I could find about that RAM is it's close to the bottom of the heap like that stuff that sells on eBay for $15-$20 a stick and it works or it doesn't. You take a gamble when you buy it. I search some other forums that ended up to be for the most part in India and the consensus was it's just about the worst stuff you can get.

Can i change out my intel 4 chip set for a better video card on my HP G71 448cl laptop

I want to play a new video game and this card wont support it. What are my options.

Hi,
Sorry to say but as your Intel Graphics Chip is integrated into the Motherboard it is not an upgradeable component.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Set for representing a deck of cards

I'm working on making a Blackjack game, and I have to use a set to represent the 52 cards. I am just wondering how do I implement such a set because I have not previously worked with anything like this. I was wondering if anyone knew if I could find a code for the set on the API page, or anywhere else. Although I could do it with an array, using a set would be much easier for the rest of my code.
Thanks
    int totalHandVal = 0;
    for(int i=0; i < deck.length; i++)
         int cardVal = Integer.parseInt(deck.getface());
          if((cardVal > 10) && (cardVal < 14)) {
               System.out.println("Face Card, +10, Actual Value = " + cardVal);
               totalHandVal += 10;
          //Ace Condition
          else if(cardVal == 14) {
               System.out.println("Ace, +11/1");
               check = true;
          else {
               System.out.println("Norm Card, +" + cardVal);
               totalHandVal += cardVal;
          if(((totalHandVal+11) > 21) && check) {
               totalHandVal += 1;
               check = false;
          else if(check) {
               totalHandVal += 11;
               check = false;
     return check;

Well basically what I'm trying to figure out is weather to use an array to represent the cards or an ArraySet. The difference being that with ArraySet I will have to write another class, but it will make things a bit easier when implementing the other methods. The code I included in my previous post was the code for my Hand class. I will need this to implement my Deck class and card class and also for the buttons I will create for the game. I wish I could show all my classes cause there are 3 or 4 of them. But really my Hand class is the class that is most dependent on weather I choose to go with ArraySet or just an array.
So I will include my hand class again showing what it would look like if I used an ArraySet which means I would need to make a class called ArraySet and complete it. So I guess my question is, if I use and ArraySet what do I need to write in it so that the methods implemented in the Hand class work?
Here is my Hand class:
// Hand.Java
import java.util.*;
public class Hand
     protected ArraySet inHand;
     // use a set to represent cards in hand, you need to supply your own implementation of set.
     //protected Card deck[];
     //private final int NUMBER_OF_CARDS = 52;
     protected int handvalue,count;
     Constructs a hand of Cards.
public Hand()
     inHand = new ArraySet(12);
     //deck = new Card[NUMBER_OF_CARDS];
    handvalue = 0;
    count = 0;
     To reduce hand when newcard makes player go over 21
      and there is an ace in the hand.
     @param newCard random card from the set
private void reduceHand(Card newCard)
     if(handvalue > 21 && aceInHand())
        handvalue -= 10;
}//end reduceHand
     To check if there is an ace in the hand.
private boolean aceInHand()
    boolean check = false;
    Object obj = null;
    Iterator it1 = inHand.iterator();
    do
        if(!it1.hasNext() || check)
            break;
        Card card = (Card)it1.next();
        if(card.getvalue() == 11)
            card.setvalue(1);
            check = true;
    } while(true);
    return check;
     Adds a new card to the hand.
     @param currentdeck the Deck the game is playing with
public Card newCard(Deck currentdeck)
     Card card = inHand.getCard();
    inHand.add(card);
    handvalue += card.getvalue();
    reduceHand(card);
    count++;
    return card;
     Returns the value of this hand.
public int getHandValue()
     return handvalue;
     Returns an iterator over this hand.
public Iterator iterator()
     return inHand.iterator();
     Removes a card from this hand.
public Card remove(Card card)
     return (Card)inHand.remove(card);
     Returns a string representation of this hand.
public String toString()
      String s = "";
     Object o = null;
     int i = 0;
     for(Iterator it1 = inHand.iterator(); it1.hasNext();)
         Card card = (Card)it1.next();
         s = (new StringBuilder()).append(s).append("card").append(i).append(": ").append(card.getvalue()).append("\n").toString();
         i++;
     return s;
}//end Hand

What's the best setting for iPhone 4s video in Final Cut Pro 6

What's the best project setting in Final Cut Studio 2 for iPhone 4S 1080p footage?

Hi,
Convert your clips to Pro Res (LT if you have FCP7) with MPEG streamclip or similar and import to FCP.
Drag the first clip to the timeline and click ""yes" on the message that asks if you want to "change sequence settings to match clip settings". You're all set to edit.
DM

Nokia C2-03 Set Password for Memory Card

Hi All,
I m using C2-03, I found an option to set password on memory card.
Apps and Games > Memory Card > Mem. card opt. > Set password
for my privacy I set a password but the Memory card still opens without asking. Can anyone plz inform me how do I secure my private data using password?
Thanks,
Khaild.
Solved!
Go to Solution.

It will continue to open up without the password. The password will only be asked if you insert the memory card in a different phone and it is only required once. It will keep opening up normally from the next time.
That password isn't there to keep your memory card protected inside your phone but instead to keep others from using your memory card. As long as the password is there, the phone can't be used on any other phone or even on a PC through card reader.

Set password on memory card and is now corrupt

I tried setting a password on my memory card, and it just locked up my phone.
I waited for ages but eventually just turned the phone off and on again. Now the phone doesn't recognize that there is a memory card at all, and when I plug it into my computer with a card reader, it says please insert media when I try to open it.
Please help! Over a year's worth of photos are on there :\

I would say if everything else fails try formatting it, or before formatting you could try putting the memory card in the card reader & use this software 'Total Commander 7.02' to see if it works & you might have a slight chance of getting your stuff back. Icant give you a 100% chances of getting your stuff back but give it a shot.

Inpection lot created when set for 'No inspection' in Qinfo record

Hi All,
We set for Material and Vendor in Qinfo record as 'No Inspection' but when we do Goods receipt it creates Inspection lot. I read help files on it, but could not figure out the reason so I am here at SDN, does any one had similar problem or does any know the solution?
Thank you,
Jagadish

Hi,
Follow these steps:
1.Create Material Master Record with QM View.
2.Activate QM Proc/ Specify Control Key 0001.
3. choose Inspn set up and inspn type to be entered as 01 and set the active indicator.
4. Create Q-info record with material / vendor.
5. Enter the release by date as 31.12.9999
6.Set the inspn control as No inspection.
7.Create inspn plan with usage 5 and status 4and enter the control key as PPQM.
8.Choose the operation and assign the inspn characteristic / sampling procedure
9.MD61/MD02/MD04
10 Convert the Purchase requisition as Purchase Order.
11. Receive the Material against the PO.
12. Now the stock will be posted to unrestricted use stock.
13. No inspn lot will be created.
Regards,
nandha

How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere?

How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere?
My screen is cracked and I need to replace my phone and I don't see a way of selecting multiple messages or even conversations one at a time to forward them to email or to save them to a memory card. I can delete thread but can't forward it or move it. Is there a setting somewhere that will move the storage location for messages to the memory card instead of internal?
If not, any suggestions on backup apps? I have heard of Txtract to back up SMS and MMS messages, and Titanium Backup to back up everything (SMS, MMS, apps, app data...). Anyone have any experience with those, or other suggestions?
Thanks!
Rich

<Duplicate topic. This thread will be locked. Please see Help transferring data (SMS, MMS, Apps, App data) to new phone? for any replies.>

Remote lock & Memory card corrupted issue

Remote lock & Memory card corrupted issue
Hi Dear Friends,
You might have experienced the "Memory card corrupted issue."
Don't panic! The solution is here!
Your memory card is just 'locked', it isn't 'corrupted'!
For sure, this post would be of great help to you, if:
• You have enabled the "Remote lock" feature of your Nokia device.
• You have sent the remote lock message to your device and locked it remotely.
Finding the solution really took me a lot of time. I was inspired by various posts on the Discussion, and decided to find the official notes on the issue. So would like to thank those who shared their tips, and helped us solve this problem.
I'm using E66, (you might use something else), and would refer to E51's and E65's User guide so often.
Of course, I'm not going to explain the instructions, and recommend you to refer to your user guides when needed.
On the contrary, I'm going to explain what may not be mentioned in your user guides.
Let’s Begin
What Has Happened:
In short, you attempted to test the feature, your phone was locked, you keyed in the lock code, code was accepted, you used the phone for a while, switched it off, powered it on, you were prompted the Lock code, you keyed in the lock code, code was accepted, you attempted to view some stuff that was on your memory card, you didn't find it, you tried to run a program that was installed on your memory card, the program icon didn't open, you put the memory card in the card reader and connected it to PC, it was not detected, you went to Menu> Tools> Memory card> You saw "Memory card corrupted"!
Don't, don't select the Yes selection key if you got the caution message, "Memory Card corrupted, reformat it?" because your memory card isn't corrupted, it's simply being locked!
But you can't find the unlock memory card command in Menu> Tools> Memory card> Options.
So? What to DO?
1. (This step is optional) Disable the Remote lock feature.
(Refer to your user guides) and change Allow Remote Lock> to no.
Then, while the unit is on,
2. Press the power key briefly, and select Remove memory card.
3. Remove the memory card from the slot.
4. Press OK if prompted.
5. Reinsert the memory card in the slot.
6. Reopen Menu> Tools> Memory card.
Is your memory card detected? If yes!
7. Follow tips number 2 & 3 of What to Know section below.
Did you get "Password removed" message?
If no, be careful of the case of the first character.
If you had changed the Remote lock message many times, use the one that was practically sent to the device via text message.
. In case you had set a password on your memory card before, you may also attempt to unlock the locked memory using your own password, not the first eight characters of the remote lock message.
Step seven would make the memory card detectable to the connected card reader to the PC too.
8. The memory card is detected temporarily, but it is locked and the "memory card corrupted" issue reappears every time you switch off/on the phone, unless you successfully complete step seven.
What to Know?
Official User guide Tips:
1. Remote locking also locks your memory card. (E51 page100)
. Yes, the one mobile phone that sends your device the predefined remote locking message, receives the confirmation message in response, indicating, "Mobile telephone and memory card are locked". But it isn't written in E66's and E65's.
2. To unlock the memory card, select Menu> Tools> Memory> Options> Remove password, and "enter the remote locking message as the password". (E51 page100)
. Yes, quite clear, but the quoted part ("enter the remote locking message as the password") isn't written on my E66's User guide, and there's a vague precaution on E65's, (refer to number 4).
3. If the message is longer than 8 characters, the first 8 characters are used as the memory card password. (E51 page100)
. Yes, quite clear good E51, but I don't own you; I have E66 your little sister. I owe my memory card's survival to nice users on the Discussion.
4. The maximum number of characters allowed is 8. Using more than 8 characters could prevent unlocking the memory card and require reformatting it. If reformatting the memory card is required, all information on the card will be lost. (E65 page28)
. Quite interesting, but it contradicts what good E51 says in number three¡!
. And it contradicts my own experience of the issue (and some other users' on the Discussion) too, since my E66's memory card accepted the 'first eight characters' of the 'ten-character long’ remote lock message that I had previously used to remote lock it.
. The first three tips are quite important and shouldn't have been excluded from E66's and E65's user guides. I don't have the time to download and review all the user guides that support this feature, but at least I read some user manuals and also got the impression (from the posts on the discussion) that there had been not enough information on E66's, E65's, E71's, N96's, and some others.
You may like to do a simple search on Google:
"The first 8 characters are used as the memory card password" site:nokia.com
Since the content of the user guides on the server seem not be searchable for any reason, you won't find any official support result except those of the good users on the Discussions. And the 'Nokia Site Search" brings no result too. (At least on the date of this post).
¡ Terribly sorry for those who have selected Yes to the Reformat caution message. It wasn't your fault. But there's an idiom that says, sleep on it! "Think about it for a while before coming up with a decision".
But now that you have tested the feature and know its solution, don't be afraid, and enable the Remote lock feature again! God forbid, but it may be needed one day!
Yours,
http://nds1.nokia.com/phones/files/guides/Nokia_E51_UG_en.pdf
http://nds1.nokia.com/phones/files/guides/Nokia_E65-1_UG_en.pdf
http://nds1.nokia.com/phones/files/guides/Nokia_E66-1_UG_en.pdf

Dear, I guess, / This article doesn't suit your case. / • You have not enabled the "Remote lock" feature of your Nokia device. / • You have not locked your device remotely. / Because you don't know where the remote lock is and haven't played with its settings. / You need to explain what has happened. / The only thing we get is that your memory card doesn't open. / 1. your phone model, e.g., 5130. / 2. What did you do recently that might have caused this issue? / 3. What methods did you try to unlock it? / Use some of the tips provided above. (except number 1). / Yours

PC Suite doesn't show the messages in memory card

Hei,
Phone - 6210 Navigator
PC Suite - 7.1
Memory in use: Memory card
When I open the Communication Centre from PC Suite, it doesn't show the messages. In the left pane, number of messages in the folders is shown as zero. This happens if the memory is set to memory card.
On the other hand, if I set the memory to Phone memory, the messages are shown properly. Why is this happening and what's the solution?
When I tried to take a backup, all data, except messages, is backed up.
Few days back, I could access all the messages via PC Suite. It worked fine. But, now, there's some problem.
I've lots of messages in the memory card & I wanna move them to different folders. How else can I do it?
-Babloo

Hello,
I think I found the cause of the problem. There's some problem with the memory card.
I set the memory for Camera also to memory card and when I take a snap, something something happens. If I set the memory to phone memory, it works fine.
But, I can access the files/folders in the memory card both from the mobile & via PC Suite.
Now, my question is "How do I retrieve the messages from the memory card?"
Any help will be greatly appreciated.
-Babloo

Setting for V-Mate Video Memory Card Recorder to v...

Similar Messages

Maybe you are looking for