Setting headers to the HttpRequest

How to set content in header of the ServletRequest..
Can any body please help me ..

Reffer :
http://java.sun.com/products/servlet/2.1/api/javax.servlet.http.HttpServletResponse.html#setHeader(javax.servlet.http.String,%20javax.servlet.http.String)

Similar Messages

Issue with Gregorian Calendar and setting Day of the week

Hi
This may have a simple solution, but its currently got me stumped. Basically, after some calculation I determine the date that a particular event should occur on. These events are listed in a JTable where the column headers are the dates of the beginning of the weeks. In order to place my calculated event in the correct column I create a Gregorian Calendar, set it to the date of the event and then set the day of the week to the beginning of the week. Normally this works fine but for a few instances, rather than getting the date at the beginning of the week, I get the date thats the beginning of the next week.
As a quick example, to kind of illustrate my problem:
I determine that the date of the event is 27/06/2006 which is a Tuesday.
I want this event to appear in the column headed 25/06/2006, the date of the beginning of the week.
In fact it appears in the column headed the 02/07/2006 which is the beginning date of the following week.
Is there anyway to get it so when I set the day to the first day of the week it goes to the beginning of the current week rather than the beginning of the next week?
Any suggestions would be gratefully recieved as I'm currently struggling to think of any.
Thanks

Hi, I dont say Monday is the begining of the week. At least I dont think I do.
As for code I'll post the conversion bit which is:
for (int i = 0; i < areaNameSelectionTable.getRowCount(); i++) {
GregorianCalendar conversionCalendar = new GregorianCalendar();
conversionCalendar.setTime((java.util.Date) prioritiesTable.getValueAt(i, 10));
conversionCalendar.set(GregorianCalendar.DAY_OF_WEEK, GregorianCalendar.SUNDAY);
}//end for loopI then create a string from the GregorianCalendar in the format DD/MM/YYYY and compare that with the headers of my table columns (Also dates in the format DD/MM/YYYY) When they match thats the column this particular event should appear in. I can post this code if necessary, but I dont know if its relevant.
Thanks

Set headers for drill-down reports.

Hi!!!
The problem we have by now is when printing a report, selected characteristis are showed in header as "multiple values" instead of showing the real values that user have choose.
Does anybody knows how to set headers for drill-down reports in order to see selected characteristics?
Thanks in advance...
Adela Cambiasso.

Sorry, me again...
I have found yet they way to show in the header the report parameters, I mean, the selection criterias that user used when execute the report... I was able to show selected characteristics inside de report but not the selection criteria...
Do you know what I have lost? or what to use for this?
Thanks again.
Adela.

Set headers with jsp

hi,
i try to make a download page with jsp. here is my code:
<%@ page import="java.io.*,javax.servlet.*,java.util.* "%>
<%
String filename = "super.zip";
response.setContentType("application/octet-stream");
response.setHeader("Content-Disposition","attachment; filename=\""+filename+"\"");
response.setHeader("Pragma","Public");
//is it correct to set headers like this
       FileInputStream fis = null;
       BufferedInputStream bis = null;
       ByteArrayOutputStream baos = null;
       int aux;
       try
                 File f = new File("c:\\" + filename);
                 fis = new FileInputStream(f);
                 bis = new BufferedInputStream(fis);
                 baos = new ByteArrayOutputStream();
               while ((aux = bis.read())!=-1)
                    baos.write((byte)aux);
               baos.writeTo(response.getOutputStream()); //is it correct to return the content to browser like this
       finally
               if (bis != null)
                    bis.close();
%>and the error i get is
getOutputStream() has already been called for this response
i need immediate help. i hope someone knows the answer. thanks...

Hi,
I had the same problem yesterday then I found the answer here:
http://forum.java.sun.com/thread.jsp?forum=45&thread=373667
The issue is that you can not have PrintWriter and OutputStream at
the same time.
Rachel

Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder

Objective: Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder.
Problems: Standard CRM_MKTTG_BP_BIRTHDATE Infoset DOES NEVER RETURN ANY RESULTS on the segmentation builder of the WebUI client (no matter the filter you specify).
Other cases: However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (using the same filters as in the segmentation builder)! Of course the segmentation builder works with other attribute lists.
NEW: IF WE DON’T ESPECIFY ANY SEGMENTATION BASE IN THE PROFILE GROUP, IT DOES RETURN RESULTS!!! (GO TO THE END OF THE DOCUMENT FOR DETAILS)
Steps followed:
Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE (Transaction SQ02).Review Data Reading Program code: do we have to change the standard code? We have only remove the "BREAK-POINT" statement.
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset (Transaction CRMD_MKTDS).
Creation of an Attribute List based on that standard Data source and selection the Birth date as a filter in the Attribute list (Transaction CRMD_MKTDS).
On the segment builder of the WebUI set any filter (Example: “TODAY”).
Steps in detail:
Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE
SQ02.
(Image deleted)
Review Data Reading Program code (Code attached)
(Image deleted)
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
Data source: Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation - Maintain Data Sources and Attribute Lists: CRMD_MKTDS
Create Data Source
(Image deleted)
Infoset: CRM_MKTTG_BP_BIRTHDATE.
Business Partner Field: CRMT_MKTTG_IS_BIRTHDATE-PARTNER_GUID
(Image deleted)
Result:
(Image deleted)
Attribute List
Creation of the Attribute List
(Image deleted)
Assign Data Source:
(Image deleted)
Selection of the Birth date as a filter in the Attribute list:
(Image deleted)
Result:
(Image deleted)
Segment builder of the WebUI:
Access to WebUI with marketing role.
Create Segment:
Creation of Profile Set
Graphical modeler
Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
Example1: “today”
Count target group. Here I would like to stand out that once you click on the “Count” option, immediately it shows 0 results. In other words, it doesn’t process any information. With other attribute lists it takes some time to process, no matter the filter or the attribute list you use. However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (with “today” filter and other)! So it seems that the problem has to do with the segment builder, not the Infoset.
Result: it never return any results no matter the filter you specify.
Other cases:
Creation of a new Data source with data "Extraction from Query" where you enter the name of your new query
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
Standard Infoset CRM_MKTTG_BP_BIRTHDATE:
We fill the form and select “Extraction from Query”:
Press SAVE and define which fields will be available for selection and which of them will be visible.
RSA3: Extractor checker in order to test the Data source:
We specify the Data source:
IT DOES RETURN RESULTS:
ALV Grid:
NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados.
Segment builder – Profile Set of the WebUISegmentation Basis: we leave it in blanc.
Graphical modeler
Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
Example1: “today”
Count target group.
Result: IT DOES RETURN RESULTS!!! àConclusion: the problem is the Segmentation Basis
Define Segmentation Basis:
Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Segmentation Basis.BS Usuarios Registrados:
Define Reports for Creating Segmentation Bases
Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Reports for Creating Segmentation BasesZMK_UTL_MGR_SITES_UREG
Define Usage for Segments:
Transacción: SPRO – Customer Relationship Management - Marketing – Segmentation – General Settings - Define Usage for Segments.ZBS_UR à02 Segmentatión Basis
Attribute List:Category:
There is no Category 02 Segmentatión Basis!!! Why?? Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???
Usage ID
NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados. Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???

It seems that the standard Infoset doesn’t work by itself with Segmentation Basis. Two SAP notes have been applied and a new Field Group has been added to the Infoset (in order to distint the Segmentation Base).
CRMT_MKTTG_IS_BIRTHDATE-MGRGUID
1966298: MGR_GUID is not populated correctly to infoset read program
2007687:Segmentation InfoSet queries saved with incorrect Master Group
For that reason we had to create a new Infoset based on the standard CRMT_MKTTG_IS_BIRTHDATE, but adding this new Field MGRGUID to the Group Fields.
Issue solved

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems! I am paying monthly for this service and it is constantly failing in some way! So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE! That isn't including the other apps that have had issues! I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging! It is costing me more than just this monthly fee! And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues. Really Adobe?

Adobe contact information - http://helpx.adobe.com/contact.html may help

BKI0008E: The environment variable BI_CALLER is not set correctely. The cur

Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
    Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
    Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
    Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
        Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
        Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
        Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
        Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
        Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
        Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
        Found keyword 'TIMEOUT_FAILURE' with value '1800'.
    Finished reading of the Backint for MaxDB configuration file.
    Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
    Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
    Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
    Using '1800' seconds as timeout for Backint for MaxDB in the case of success
    Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
    Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
    Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
    Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
    Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
    Setting environment variable 'BI_REQUEST' to value 'NEW'.
    Setting environment variable 'BI_BACKUP' to value 'FULL'.
    Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
    Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
    Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
    Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
    Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
    Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
    Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
    Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
    Asking for state of database.
    2009-10-22 02:06:09 Database is still preparing the backup.
    Waiting 1 second ... Done.
    Asking for state of database.
    2009-10-22 02:06:10 Database is still preparing the backup.
    Waiting 2 seconds ... Done.
    Asking for state of database.
    2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
    Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
    Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
    2009-10-22 02:06:12 The backup tool is running.
    2009-10-22 02:06:12 The database is working on the request.
    2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
    2009-10-22 02:06:17 The database is working on the request.
    2009-10-22 02:06:27 The database is working on the request.
    2009-10-22 02:06:42 The database is working on the request.
    2009-10-22 02:07:02 The database is working on the request.
    2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
    2009-10-22 02:07:17 The database has finished work on the request.
    Receiving a reply from the database kernel.
    Got the following reply from db-kernel:
        SQL-Code              :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
    Have encountered error -24920:
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
    Constructed the following reply:
        ERR
        -24920,ERR_BACKUPOP: backup operation was unsuccessful
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
    Removing data transfer pipes.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
    Removed data transfer pipes successfully.
    Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
                                 Data Protection for mySAP(R)
                     Interface between BR*Tools and Tivoli Storage Manager
                     - Version 5, Release 4, Modification 0.0 for Linux x86_64
                           Build: 303 compiled on Nov 16 2006
                (c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
        BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
        usage:
         backint -p <par_file> [-u <user_id>] [-f <function>]
                [-t <type>] [-i <in_file>] [-o <out_file>] [-c]
        where:
               <user_id>    backint utility user
               <function>   backup | restore | inquire | password | delete
               <type>       file | file_online
               <par_file>   parameter file for backup utility
               <in_file>    name of a text file that defines the objects
                            default: STDIN
               <out_file>   Pool for processing messages and the results
                            of the executed function.
                            default: STOUT
        BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
        BKI0021I: Elapsed time: 01 sec .
        BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
    Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
    Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
    Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
    Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.

Also, is there any specification about the user permissions and about how the backup should be run?

I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device

In osx 10.8.2, how do I maintain two Bluetooth devices (mouse and head-set) connected at the same time?

I want to use both a Bluetooth mouse and head-set at the same time, is that possible?

Thank PapaSmurf (?)
My problem was that in Sound settings was not indicated the Head-Set device, although existing, but BoomDevice, that greatly enhances the sound level. So what I had to do was first change from BoomDevice to the Head-Set, and then I changed down to Internal speaker and then again chose BoomDevice. That way, I could turn off the Head-Set without getting the error message, and yet maintain the internal speaker through the BoomDevice.
I had a feeling that I had to do something with the sound settings and your reply made me experiment and succeed! Thanks once again!

How to create a custom layout set to display the KM folders...

Could someone please tell me how to create a custom layout set to display the KM folders?
Thanks,
Sudha.

Hi Sudha,
Please check the following blogs whick will guide you step by step.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4123
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3071
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/c91b5610b65b4aa8204d09384d156b/frameset.htm
If helps reward points
cheers
dev

Issues with setting "Maked Reader the default PDF viewer" with Adobe Customization Wizard XI

I am using the Adobe Customization Wizard XI. I have set the following options in the Adobe Customization Wizard.
Personalization Options
Enabled the checkbox for Suppress display of End User License Agreement (EULA)
Installation Options
Selected the radio button for Make Reader the default PDF viewer
Run Installation: selected radio button Silently(No Interface)
Security
Enhanced Security Settings - Clicked drop down and set value to Disable
Online Services and Features
Checked Disable product updates
Checkd In Adobe Reader, disable Help > Purchase Adobe Acrobat
Checked Disable Product Improvement Program
Checked Disable Viewing of PDF with Ads for Adobe PDF
Checked Disable all Adobe online services based workflows and entry points.
I have tried to deploy the MSI with MST via GPO and Command Line with no luck. Every time i deploy via below methods, the same result occurs, all of the options are set correctly except the "Make Reader the default PDF viewer". I know how to manually set this option via Windows or Adobe interfaces but i am looking to roll this out to the masses and would not want a bunch of service desk calls because a user clicks on an Adobe PDF file and it is not opening in Adobe Reader.
GPO
Create New Package Use AcroRead.msi
Choose Advanced
Deployment Options - Click Uninstall this application when it falls out of the scope of management.
Modifications - Select Transform file located in the folder of MSI
Command Line.
Tried these options to try and apply "Make Reader the default PDF viewer"
msiexec /i "<path>\AcroRead.msi" TRANSFORMS="<path>\TransformFile.mst"
msiexec /i "<path>\AcroRead.msi" TRANSFORMS="<path>\TransformFile.mst" /qn
msiexec /i "<path>\AcroRead.msi" IW_DEFAULT_VERB=Read
msiexec /i "<path>\AcroRead.msi" TRANSFORMS="<path>\TransformFile.mst" IW_DEFAULT_VERB=Read /qn
Anyone know how to make this setting work with the Transform file, i sure would appreciate assistance on this issue.

Instead of saving as a PDF thru Work do a Print ➙ PDF ➙ Save as PDF and it will be saved the first time with the Preview icon.

When I email myself a picture from my iphone 4s, the email is sent from an email account that I don't have set up as the default account. How can I set it up so that the emails are coming from the default account selected in Mail?

Under my mail tab, it shows that I have a specific email account set up as a default account. That is the account I would like for me emails to be sent from. But when I actually send out an email such as a picture, it is being sent from one of my different email accounts that is not set up as the default. How can I change this so that future messages will be sent from the default account? Any advice would be appreciated. Thanks!!

All photo attachments received or sent with the iPhone's Mail app appear inline or viewed in place within the body of the message when viewed with the iPhone's Mail app which is the same with the Mail.app on a Mac. A photo attachment that appears inline or viewed in place does not mean the photo was not sent as a true attachment to the message. A photo attached to a message with the iPhone's Mail app is sent as a true attachment to the message. How an inline or viewed in place attachment appears on the recipient's end depends on the recipient's email client. If the recipient's email client does not support viewing an attached photo inline or viewed in place within the body of the message, the attached file must be manually selected and opened to viewed.
I am getting the email with the Picture Inline ( not as attachment),The picture is shown distorted , no metter what i do and with what mail client i am using (Gmail\Hotmail\My Enterprise exchange mail), i still get the same behavior.
With which email client?

HT204053 I have tried to load iCloud onto my Vista opperated pc but do not get a control panel with which to set it up. Each time I use my iTunes id to log into the iCloudI am told that it is an apple id but not set up for the Cloud. How do I get the cont

I have tried to install iCloud on to my Windows Vista pc. No control panel is present and when I try to login to iCloud using my iTunes id, I am told that it is an Apple id but not set up for the cloud. without the control panel where do I set up my iCloud id?

You can not setup a new iCloud account using a PC. You must use an Apple device (Mac or iPhone/iPad) to create the account, then sign into it using your PC.

I have a IPhone 5 and Iphone 5s. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone. Anyway to solve this problem?

I have a IPhone 5 and Iphone 5s, each phone is activited with a different service provider. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone. Hence you do not know exactly which line the caller called. If you answered using the wrong phone, then anyone calling the other number will not get through. Anyway to solve this problem?

Hey David Koh TP,
Thanks for the question. It sounds like your devices are set up to use continuity together. Specifically, it sounds like you are signed into the same Apple ID in FaceTime, and have iPhone Cellular Calls enabled. To resolve your issue, simply disable this setting:
Connect your iPhone, iPad, and iPod touch using Continuity
http://support.apple.com/kb/HT6337
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
Thanks,
Matt M.

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

Setting headers to the HttpRequest

Similar Messages

Maybe you are looking for