Setting host name for non-Apache webserver

http://www.appdal.com is a website in my Snow Leopard Server. And I have non-Apache webserver running http://appdal.com:8080/ . I want to give host name 'pier' chaing the web host name settings of this
But it is not working. What did I do something wrong?

i want to setup a hostname 'pier', so i can use url 'pier.appdal.com' instead of 'appdal.com:8080'.
Although the latter url works fine, but i don't want to foce my users to enter the :8080 .

Similar Messages

Naming workstations - setting host name

I would like to know if there is a way to set host names for multiple
computers once I re-image them with the same base image. I was thinking I
could create a bunch of reg keys something like "lab1-01", "lab1-02" etc.
and register computers in the lab as per their physical location.
It seems though that all their host names will remain the same as per the
original one of the base image. I then can not remote via the host name
unlike with Zen 7 when I could do that in ConsoleOne which did not rely on
host names I believe. So ideally I would like to have an easy way to
populate host names ( and maybe computer names, too ) during registration,
is that at all possible ?
Andrew

I am pretty sure that ZCM 10 also has a policy or setting, which if I
remember is not enabled by default, which will rename the device names
if the workstation name changes.
Here it is ...
Configuration | Device Management | Registration
At the bottom is a section called "Device Dynamic Rename", with t a
checkbox for "Enable automatic renaming of devices". Here is what the
help file says:
Device Dynamic Rename
The Device Dynamic Rename panel lets you enable devices to be renamed,
if necessary, whenever they refresh their registration information. A
device might need to be renamed for the following reasons:
The naming template being applied to the device has changed.
A different naming template (for example, a folder naming
template rather than the Management Zone naming template) is now being
applied to the device.
Because a devices GUID and not its name is used for all relationships
with other ZENworks objects (folders, groups, bundles, policies, and so
forth), renaming the device does not affect anything other than the name
that is displayed in ZENworks Control Center.
You can define this setting at two levels:
Management Zone: The setting is inherited by all devices.
Device Folder: The setting is inherited by all devices contained
within the folder or its subfolders. Overrides the Management Zone setting.
NOTE:If you are configuring the setting on a device folder, you need to
click Override settings before you can modify the setting.
Andrew wrote:
> I would like to know if there is a way to set host names for multiple
> computers once I re-image them with the same base image. I was thinking
> I could create a bunch of reg keys something like "lab1-01", "lab1-02"
> etc. and register computers in the lab as per their physical location.
>
> It seems though that all their host names will remain the same as per
> the original one of the base image. I then can not remote via the host
> name unlike with Zen 7 when I could do that in ConsoleOne which did not
> rely on host names I believe. So ideally I would like to have an easy
> way to populate host names ( and maybe computer names, too ) during
> registration, is that at all possible ?
>
> Andrew
>

How can IC WebClient determine the host name for free seating?

Hi,
I want to determine the host name at CRM application server by ICI interface for free seating scenario.
There is a TCODE CRMM_IC_GFS to set 'Host Name Identification Applet'. But when I check on it, all buttions in IC Webclient disappeared. I followed the note 812399 to change Java security configuration, but the synptom still exist. Do anybody now how to? Thanks!
BR,
Hao

To run a public VPN server, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network.
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
4. Configure any firewall in use to pass this traffic.

Custom host-name for web application SharePoint 2010

I am facing a weird behavior. Can anyone help me regarding this?
Steps performed:
1. Created a web application using custom host name.
2. Created a site collection using "Blank" site template. Nothing issues.
3. Created another site collection using "Publishing" site template. Authentication prompt came multiple times. IIS logs/Fiddler/HTTP Watch are full with 401 entries.
4. Added the custom host-name with web server IP in local desktop hosts file(which is in intranet domain). Prompt issue fixed.
5. Authentication mode set as NTLM.

Hi DDasgupta,
After you created a web application with a custom host name, if you got a prompt for the user and you may face the following issues:
There is continuous prompt for the credentials
HTTP 401.1 error
This shows that there is a problem with the Loopback configuration. This situation should occur only when we access the application from the server machine.
For fixing the problem, we have to disable the Loopback value inside the registry.Open the Registry Editor (regedit.exe) and locate the following key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa, and create a new Key Value of type DWORD inside
it and set the value to 1.
More information, please refer to the link:
http://www.c-sharpcorner.com/UploadFile/40e97e/sharepoint-2010-creating-host-name-for-web-application/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Virtual Host Name for CM

Hi ,
R12.1.3 & 11gR2 DB
I have a qucik question . When We have Virtual Host Name for setting , What Should be the node name for ICM in Concurrent Manager Admin form.
In One of our Instance : For ICM & Other Manager , its Virtual Host Name
For Other : ICM : Physical Host Name & Other Manager Virtual Host Name .
Which is good. We having a issue with ICM on both Nodes , in every minutes is going down and come up automatically.
Regards
Sourabh Gupta

Hi Hussein,
Thanks a lot. I have already review these document.
Is Auto Failover With Virtual Hostnames For Concurrent Processing Servers Supported In 11i Or R12? (Doc ID 456540.1)
Adding an Alias Hostname with Oracle E-Business Suite Release 12 (Doc ID 603883.1)
Concurrent Processing - CONC-SM TNS FAIL In Internal Concurrent Manager (ICM) Log File With Virtual Hosts Configuration [ID 961216.1]
ICM Not Starting: Node Name not Registered [ID 602942.1]
I am curious what should be the node name in concurrent manager Administrator form.
W ether is should be the virtual host name or physical host name.
I have just checked with few people , Some Says ICM node name should be Physical server name & Other CM name can be Virtual name. I am not sure on what basis people are saying.
Few says node name should be the physical host for every CM.
Note Sure what is correct & best configuration.
Regards
Sourabh GUpta

What are the userid,password, and host name for oracle 9i?

HI Guys.
I am a research student at the University and the I recently downloaded Oracle 9i for my research. But the problems is also with seting it up. Please could you show me the userid, password, and host name for oracle 9i.
Thanks in advance for your cooperations.
Malinga R
[email protected]

I believe that starting with 9.2, you have to specify different passwords when you install (can't be the default).
Justin

Local node not included in the list of host names for grid installation

I'm attempting to install clusterware on Solaris 11 on 2 nodes. I've tried tweaking the /etc/hosts file in a few different ways by including the fully-qualified name and without it for the localhost, but it still gives me this error every time. The runcluvfy.sh script doesn't run on Solaris 11. Does anyone know how to get around this problem?
I've tried this using the silent install and with OUI, but got the same error both ways. This is the format of the node names:
oracle.install.crs.config.clusterNodes=myLocalNode:myLocalNode-vip1,myOtherNode:myOtherNode-vip2
[FATAL] [INS-40907] Local node not included in the list of host names for grid installation.
CAUSE: The local node (the node where you are running the installer) was missing from the list of host names you provided.
ACTION: Include the local node in the list of host names for grid installation.
Edited by: 982828 on Jan 18, 2013 1:18 PM

Hi,
what Oracle Version are you trying to install?
Best to directly start with 11.2.0.3 and look in MOS for certification, hints requirements.
Regards
Sebastian

Getting ipaddress or host name for virtual server

I want to get the ipaddress or host name for virtual server in a cluster environment. If i do
java.net.InetAddress.getLocalHost().getHostName()
it returns the ipaddress of the physical node currently running virtual server.
Is there any way to get the ipaddress or host name for virtual server ?

You can get the hostname by clicking on the account properties in outlook, but the port you connect to must be opened by your system admin.

Host name for OMS

I have Oracle 9i Database installed
When I log into the oracle management server in OEM,
I don't know the <host name> for the Management server
where do I get this info?
I am getting the default of my ISP address!

Try going to an OS command prompt and use the oemctl command to find the status. Go to the link I posted earlier and use your browser's find function to search for oemctl. Since it is on your local machine, use the local command, you shouldn't need a hostname (though multiple oracle homes can happen and be very confusing).
Can't say as I remember much else on your old version, I second the suggestion to use more recent things.

Error on node PATHRAC2:rshd: 0826-826 The host name for your address is not

Dear Team,
As am installing oracle rac on aix 5.3 tl 11 also done with precheck working fine..
user equilvalenec---done
pacakages ---- done
ssh --- done
but while installtion at end while copying its raise error
Error on node PATHRAC2:rshd: 0826-826 The host name for your address is not known. :failed]
f.y.i ssh woting then also
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.08.15 12:55:50 =~=~=~=~=~=~=~=~=~=~=~=
ssh PATHRAC1
Last unsuccessful login: Thu Aug 12 18:39:35 IST 2010 on ssh from 10.16.5.204
Last login: Sun Aug 15 12:55:26 IST 2010 on /dev/pts/5 from pathrac1.icicilombard.com
* Welcome to AIX Version 5.3! *
* Please see the README file in /usr/lpp/bos for information pertinent to *
* this release of the AIX Operating System. *
PATHRAC1-> exit
logout
Connection to PATHRAC1 closed.
PATHRAC1-> ssh PATHRAC1 2
Last unsuccessful login: Tue Aug 10 17:44:34 IST 2010 on ssh from 10.16.4.121
Last login: Sun Aug 15 12:53:21 IST 2010 on /dev/pts/2 from 10.16.5.204
* Welcome to AIX Version 5.3! *
* Please see the README file in /usr/lpp/bos for information pertinent to *
* this release of the AIX Operating System. *
PATHRAC2-> exit
logout
Connection to PATHRAC2 closed.
PATHRAC1-> ssh PATHRAC2 PATHRAC1-vip
PATHRAC1-> ssh PATHRAC2-priv
Last unsuccessful login: Thu Aug 12 18:39:35 IST 2010 on ssh from 10.16.5.204
Last login: Sun Aug 15 12:55:52 IST 2010 on /dev/pts/5 from pathrac1.icicilombard.com
* Welcome to AIX Version 5.3! *
* Please see the README file in /usr/lpp/bos for information pertinent to *
* this release of the AIX Operating System. *
PATHRAC1-> exit
logout
Connection to PATHRAC2-priv closed.
PATHRAC1-> ssh PATHRAC2-priv[1P[1@1
Last unsuccessful login: Tue Aug 10 17:44:34 IST 2010 on ssh from 10.16.4.121
Last login: Sun Aug 15 12:55:56 IST 2010 on /dev/pts/3 from 10.128.120.237
* Welcome to AIX Version 5.3! *
* Please see the README file in /usr/lpp/bos for information pertinent to *
* this release of the AIX Operating System. *
PATHRAC2-> exit
logout
Connection to PATHRAC1-priv closed.
PATHRAC1->
please help
Regards
Upendra
9820011875

Hi,
1. Please check you hostname for both node
# hostname
2. Check the hostname exist in /etc/hosts. Public,Virtual,,Private
3. Re-check your ssh. Test the ssh
PATHRAC1 > ssh PATHRAC1 hostname
PATHRAC1 > ssh PATHRAC2 hostname

Email host name for mailbean

Hi, I have a problem about finding my own email host name when I am trying to send an email within JSP. I have tried many names such as: "mail.gmail.com"," yahoo.com", and the one included in the code blow. I think I have a misunderstanding about this host name, could anyone explain for me please? Thanks a lot.
Blow is my code
* Mail.java
* Created on 2006年8月14日, 下午2:59
package myclass;
import java.io.*;
import java.util.*;
import javax.mail.*;
import javax.mail.event.*;
import javax.mail.internet.*;
* @author weiming514
public final class MailBean extends Object implements Serializable{
private String to = null;
private String from = null;
private String subject = null;
private String message = null;
public static Properties props = null;
public static Session session = null;
static{
/** Setting Properties for STMP host **/
props = System.getProperties();
props.put("mail.smtp.host", "hostname");
session = Session.getDefaultInstance(props, null);
     /* Setter Methods */
     public void setTo(String to) {
          this.to = to;
     public void setFrom(String from) {
          this.from = from;
     public void setSubject(String subject) {
          this.subject = subject;
     public void setMessage(String message) {
          this.message = message;
/* Sends Email */
public void sendMail() throws Exception{
if(!this.everythingIsSet())
throw new Exception("Could not send email.");
try{
MimeMessage message = new MimeMessage(session);
message.setRecipient(Message.RecipientType.TO, new InternetAddress(this.to));
message.setFrom(new InternetAddress(this.from));
message.setSubject(this.subject);
message.setText(this.message);
Transport.send(message);
catch(MessagingException e){
throw new Exception(e.getMessage());
/* Checks whether all propertises have been set or not */
     private boolean everythingIsSet() {
          if((this.to == null) || (this.from == null) ||
          (this.subject == null) || (this.message == null))
               return false;
          if((this.to.indexOf("@") == -1) ||
               (this.to.indexOf(".") == -1))
               return false;
          if((this.from.indexOf("@") == -1) ||
               (this.from.indexOf(".") == -1))
               return false;
          return true;
Error:
unknown smtp host: hostname

and the one included in the code blow.You have written "hostname" in the code below. Since "hostname" is certainly NOT a valid SMTP host name,
that's why you get the error: unknown smtp host: hostname.
What did you expect? You must provide a valid SMTP host name, NOT "hostname". You see the difference right?
Try with your ISP (Internet Service Provider) SMTP host name.
It should be something like: stmp.somename.com.
That's the one you must set in your email client (Outlook, Thunderbird, Eudora, Lotus Notes, whatever) to send your emails.
Next time please paste your code between [code] tags with the help of the code button just above the edit message area.
Regards

DNS host name for virtual IP on WLC 5760?

Hi all,
Does anybody of you know, if there is a way in setting a DNS hostname for the virtual IP on the 5760 WLC?
The parameter-map does not offer any option.
AireOS based WLCs do offer it in order to see a DNS name instead of the virtual IP when connecting to the captive portal.
Thanks in advance,
Patrick

Hi Stephen/Patrick,
Can you try and confirm if below works?
Switch(config)#parameter-map type webauth global
Switch(config-params-parameter-map)#virtual-ip ipv4 1.1.1.1 ?
virtual-host Virtual host name
Switch(config-params-parameter-map)#virtual-ip ipv4 1.1.1.1 virtual-host
Regards,
Ankur

Dont understand what i should put down for host name for creating an email account?

Dont understand incoming and outcoming server. dont know what to put for host name.
can someone help?

Do you have your email account set up on your computer e.g. on Outlook on a PC or Mail on a Mac ? If you have then you should be able to sync the settings from that to your iPad via the Info tab when connected to your computer's iTunes. Or you could just look at the settings for the account on your computer's email program and copy them over to the iPad manually.
The incoming and outgoing server names are the servers that your email provider uses for your account to recieve (incoming) and send (outgoing) emails. A lot of accounts should be covered by the options that are listed on the 'Add Account' screen - for my Yahoo based accounts I just chose Yahoo! and the settings were set for me. If you have an account that isn't covered by those types then you could try logging into your account via a browser and see if they have any help for what settings you need to use. Different account providers have different settings, so if your can't find anything on your provider's site if you say on here who your provider is there might be somebody else here who has the same provider and can tell you what settings to use.

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

Setting host name for non-Apache webserver

Similar Messages

Maybe you are looking for