Setting in point changes out point and vice verse
I'm working on a motion graphics project in After Effects. Setting in and out points is fine but my After Effects is acting strange all of the sudden. It allows me to set an in point for a layer but once I set an out point it sets the in point back to the begining. The same happens the other way arround. This is really annoying and is actually impeding my ability to work. How can I fix this issue?
Do you use any time-stretching/ time remapping? Also this behavior may occur with some combinations of source timecode usage, so turn that off in the prefs and elsewhere if you don't depend on it...
Mylenium
Similar Messages
-
I have very sensible defaults for my display; i.e. I have dark GTK scheme (dark gray background, light gray text) that suits me way more when working on my computer while it's dark around. I, however, like looking at web pages as how they were mean to be seen. Unfortunately, most of web designers don't think about anyone having non-default colors set up.
Example one ( http://www.cedok.cz ):
This site's CSS style has "color: rgb(45, 45, 45);" for the whole <body> but for <select> elements there is no "background-color" set. This means there is a select box rendered with dark gray background and dark gray foreground (text color). This is pretty badly readable (obviously).
To mention one particular element from this site: e.g. <select id="ctl00_ContentPlaceHolderLevySloupec_HledaniMultiTab1_HledaniZajezdu1_ddlTypZajezdu">
Example two ( https://support.mozilla.org/en-US/questions/new/desktop/customize/form ):
On this page (where I'm currently filling in this question) the <textarea id="id_content"> has "background: ... rgb(255, 255, 255);" set, but with my default font color, this textarea is rendered as light gray text on a white background. Again, pretty unreadable (and eye-hurting).
I can provide screenshots and more reasoning if needed.
I'm asking if there is (or might be) an option (even disabled by default) or at least an add-on which would keep default colors unless both foreground and background colors were specified. I think this might make Firefox very usable for many people which like to have their default colors configured.
In case you won't be able to help me by fixing this, could you redirect me to the right place where I could get this requested in a way that might be really possible to happen (bugzilla?).
Thank you very much in advance.Thanks for the reply, but I'm sorry, no. I don't want any addon that customizes colors, I want to use default colors and only prohibit changing them unless both background and foreground colors are changed.
I have made no color changes WRT to Firefox *only*, I just changed the default for the whole toolkit (gtk in this case). The thing I need is to disable changing *only one* property out of two ({back,fore}ground). Whenever the second one gets set as well, this new setting (both of them) may get reflected, but not before that. It'd be nice to keep this when changing the colors back (deleting the style), but that's not necessary.
I hope that's understandable, feel free to ask for if that's not the case.
To express what I mean a bit more precisely, see the attached image. In that image there are four textareas (one of the elements that gets affected by this). First one is a default one (which I want to have if the page has nothing set), the second one is nicely modified to fit for example to a blue-ish page (this one I like as well).
Second row of textareas shows how the final element looks like if the page has only one of these elements set up. First one changes background without changing font color, the second one vice versa. Both of them are very badly readable, especially with low lighting around.
This is consequently the same case when it comes to default page background which I cannot set at all, because too many pages have only "color:" set without changed background and that is completely messed up then. Going to extremes, I might mention all color-related modifications (see how ugly the borders look when the background is changed and nothing is done to these borders, their size and color is kept default), but I understand that's too much. -
ASA Version 7.0(8)
hostname BUJ-IT-ASA-LAN-2
domain-name leo.bi
enable password MgKXXPviZgW4zhKc encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
dns-guard
interface Ethernet0/0
description connects ucom lan
nameif inside
security-level 100
ip address 192.168.0.13 255.255.248.0
interface Ethernet0/1
description out interface
nameif outside
security-level 0
ip address 192.168.254.1 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
pager lines 24
logging asdm informational
mtu management 1500
mtu inside 1500
mtu outside 1500
no failover
asdm image disk0:/asdm-508.bin
no asdm history enable
arp timeout 14400
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
username UcomIT password Tx95VR7l4gIiavnh encrypted
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.0.0 255.255.248.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.0.0 255.255.248.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd lease 3600
dhcpd ping_timeout 50
dhcpd enable management
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns maximum-length 512
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
service-policy global_policy global
Cryptochecksum:ba068a6f85d256ce9351d903c60873e5
: endHi,
Its success really depends on the rest of the network that I dont know about.
If you hosts that you are using to PING/ICMP through the ASA are connected to the same network as the ASAs interface then you will have to make sure that the hosts both have routes towards the other network.
Also if on the "outside" of the ASA there are additional networking devices then you have to configure default route on the ASA also as mentioned in the other discussion.
route outside 0.0.0.0 0.0.0.0
The above replys ACL was just an example of the configuration format. If you wanted to allow ICMP then you would also have to allow ICMP
access-list OUTSIDE-IN permit icmp 192.168.254.0 255.255.255.0 192.168.0.0 255.255.248.0 echo
I dont see anything else wrong with the ASA configuration related to ICMP other than possibly the lacking of default route and allowing the ICMP from the "outside" with the ACL "OUTSIDE-IN".
Go through the network setup from one host to the other. On each step confirm that that device has route towards both of the networks. Otherwise the devices will naturally not be able to forward the ICMP messages from end to end.
- Jouni -
My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?
It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved. -
I would like to delete emails from my PC when I delete them from my Ipad (and vice versa, is possible). How do I set this up? Thanks in advance.
The ability to do that would depend on the type of email account that you have. If it is a POP account, it cannot be done. If it is an IMAP account, it should sync across devices automatically. If you are not sure what type of account it is, who is your email provider?
-
My screen goes off and on once its changes power from AC to Battery and vice versa
Dear All
I started noticing this from today ownwards that whenever the power is switched off and goes to battery mode and vice versa the screen turns off and on for 1 second. I dont know this is normal or i did mess up with some kind of power options. I am using T410i.
Please help me out in this.
Solved!
Go to Solution.Hi sanku500, and welcome to the Lenovo User Community!
What you're seeing is the video refresh rate switching:
http://forums.lenovo.com/t5/ThinkPad-Edge-Knowledge-Base/Display-screen-flickers-blinks-goes-blank-o...
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer! -
How to change view in iPhone from vertical to horizon and vice versa?
How to change view in iPhone from vertical to horizon and vice versa?
Not all applications will go from Portrait to Landscape. Changing just requires you to turn the device. However, if you have the orientation lock activated, then it will not change to landscape. To check, look in the status bar and see if you can see a small lock shaped icon near the battery icon. If you do, then orientation lock is activated. To turn it off, swipe upwards from the bottom of the iPhone screen to bring up Control Center. The orientation lock is the last icon on the top row to the right. Tap on it to turn it off. White is on, black is off.
-
I am not being able to send pictures via Bluetooth from my Samsung phone to my iPad mini and vice versa. So is there a setting or is it a compatibility issue ? Please help
You can also use a wireless flash drive.
http://www.sandisk.com/products/wireless/flash-drive/ -
How to convert a data set into a xml data and vice versa
i am new to oracle with xml..
my aim is to convert a data set into a xml data and vice versa..
my work is as follows...
my query:
select rggpk,rggcode,rggname from ms_regiongeo
to convert a data set into a xml*
select XMLType(trim(replace(dbms_xmlgen.getXML('select rggpk,rggcode, rggname from ms_regiongeo'),'<?xml version="1.0"?>',''))) XML_DATA from dual;
(this works fine and output of this query is as follows..)
<ROWSET>
<ROW>
<RGGPK>201</RGGPK>
<RGGCODE>Asia</RGGCODE>
<RGGNAME>Asia</RGGNAME>
</ROW>
<ROW>
<RGGPK>1</RGGPK>
<RGGCODE>OTH</RGGCODE>
<RGGNAME>Others</RGGNAME>
</ROW>
<ROW>
<RGGPK>21</RGGPK>
<RGGCODE>COB</RGGCODE>
<RGGNAME>Africa and Yemen</RGGNAME>
</ROW>
<ROW>
<RGGPK>2</RGGPK>
<RGGCODE>AUS</RGGCODE>
<RGGNAME>Australia</RGGNAME>
</ROW>
<ROW>
<RGGPK>23</RGGPK>
<RGGCODE>IND</RGGCODE>
<RGGNAME>Indian Sub Continent</RGGNAME>
</ROW>
<ROW>
<RGGPK>24</RGGPK>
<RGGCODE>TVM</RGGCODE>
<RGGNAME>North America</RGGNAME>
</ROW>
</ROWSET>
and to reverse this process, I tried a query like this..*
select EXTRACTVALUE (XML_DATA,'ROWSET/ROW/RGGPK') as EMP_ID
from(
select XMLType(trim(replace(dbms_xmlgen.getXML('select rggpk,rggcode, rggname from ms_regiongeo'),'<?xml version="1.0"?>',''))) XML_DATA from dual
)tab1but failed.. and raised with an eror: ORA-19025
help me..
regards,
johnHi-
my aim is to convert a data set into a xml data You can refer to the below posts
Adding namespace to XML output
Re: how to convert table data in xml format based on the xsd. -
In the final display list how can i change rows to columns and vice versa
in the final display list how can i change rows to columns and vice versa
It's Urgent
Thanks
BasuHai,
Check this following Threads,
converting rows to columns in internal tables
Re: logic- report to move columns to row in a list
Regards,
Padmam. -
How to change manual segment management to automatic? and vice versa
how to change manual segment management to automatic? and vice versa
i can't find any option for that in EM
ThanksPaolo Marin,
The original wants to change from Freelist management to Automatic Segment Space management - the URL you supplied is about converting from Dictionary Managed tablespaces (DMT) to Locally Managed tablespaces (LMT).
In passing - the article you reference says: First, MAKE sure to take a full backup of the tablespace and all related tablespaces (inter-tablespace referential integrity) before running this procedure:. There's no such thing as 'tablespace referential integrity', but (a) it would be a good idea to make sure that no-one else is using the database whilst you do a conversion, and (b) it's the system tablespace that holds the data dictionary so that's the one other (really important) tablespace you have to back up before starting.
There is a very old note about the limitations of doing the DMT -> LMT conversion here: http://www.jlcomp.demon.co.uk/book_8i/ch_08.html#Extent%20Management
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
https://www.jlcomp.demon.co.uk -
my family and I share the same account of apple. I'm getting phone calls and messages from my mothers and my number and vice versa. is there anything we can do
The short solution is to go to Settings > FaceTime > iPhone Cellular Calls OFF.
However, as Csound points out, you should not really be sharing an Apple ID with anyone. See: How to Stop Sharing an Apple ID.
(Note that I am affiliated with that site, and some pages contain ads). -
How to link idoc with its corresponding documents and vice versa...
Hello Experts,
What are the tables, transactions, etc that can link a certain document(e.g. PO, GR, invoice) to its IDoc and
vice versa.
Thank you guys and take care!Hi,
The Message Control parameters from the partner profiles must also match the corresponding
fields in the output type. These parameters include:
u2212 Application
u2212 Partner
u2212 Partner function
u2212 Output type
Tcode - NACE (Output Control)
Tables - SRRELROLES (Object Relationship Service: Roles)
Message Control is a mechanism by which documents are output based on certain conditions.
1) The application id, communication structure and o/p determination procedure are responsible for triggering IDocs corresponding to a particular application document. For this to happen message control settings have to be done.
2) Message Control u2013 also referred to as output control or conditioning technique u2013 is a cross-application component used as a service program in several areas. The basic concept behind Message control is to generate and manage outputs from an application and control their timings and medium of exchange.
3) Message control settings can be done via transaction NACE or via transaction NACO.
4) Starting point in message control in the u201COutput Determination Procedureu201D (Procedure within NACE txn.). Depending upon the configuration setting in SPRO this procedure is determined.
A procedure defines a set of possible outputs for an application. We can define several procedures for an application, but only one can be configured as
active (i.e. for a particular transaction document within an application only one procedure will be determined based on configuration settings).
Eg->
a) For Delivery (txn. VL01NO) the document type setting in configuration (SPRO -> Logistics Execution -> Shipping -> Deliveries -> Define Delivery types) determines the procedure.
So whenever we save a document of particular application (of particular application id) and of particular document type, the particular o/p determination procedure is triggered.
b) For sales, SPRO -> Sales and Distribution -> Basic Functions -> Output Control -> Output Determination -> Output Determination Using the Condition Technique.
5) In the transaction NACE we can see that corresponding to application id (say u2018V2u2019 (shipping)) various procedures are defined:
6) Before making the entry of the output type corresponding to a particular procedure, we have to define it with its attributes.
The output type defines the characteristics and attributes of the output itself. We can access the output types on transaction NACE by selecting an application and clicking the Output type button.
7) Access sequence defines a sequence in which business rules are checked for proposing an output type. It has following attributes:
- A set of business rules or conditions.
- A sequence in which the rules or conditions are checked.
- A requirement that checks for business rules using ABAP programs.
- An exclusive or inclusive strategy.
We can access the access sequences on transaction NACE by selecting an application and clicking the Access Sequences button.
Business rule 1 is based on SOrg./Distrib.Ch/Division/Customer. Business rule 2 is based on Sales Organization/Customer Number. Each business rule is, effectively, a set of fields defined in a condition table.
8) Condition table specifies the key fields for a business rule. Hence for Business rule 1 the key is Sales Org., Distribution Channel, Division and Customer.
9) Condition records are inserted in the condition table. The transaction is evaluated with the key (of the condition table based on business rule) and if the transactional data matches with the condition record the output is proposed.
Condition records are defined at last.
10) Several programs and tables are part of Message Control. For EDI, the following tables and programs will frequently be dealt with:
*NAST - This table has an entry for the processing program used for an output type.
*TNAPR - This table has an entry for the processing program used for an output type.
*RSNAST00 - This program is used to process entries in the NAST table.
*RSNASTED - This processing program exists for each output medium. ALE_PROCESSING is the routine in the RSNASTED program to process ALE outputs.
11) Final overview of the components used in Message control to propose outputs.
12) After doing all the settings for message control, the partner profile setting for this ALE scenario needs to be accomplished. We need to add the following entry to the outbound parameters of the partner profile:
13) One important question that arises at this juncture is, how is the partner profile determined from the output type is case of ALE?
This is information is stored in table EDP12 (Partner Profile: Outbound with Message Control). Based on the Partner type of receiver (RCVPRT), output type (KSCHL) and Application for message conditions - without value table (KAPPL), the Partner number of receiver (RCVPRN), Outbound process code(EVCODA), Message type (MESTYP) and other related values are determined.
Regards
Pugazhenthi.P -
How can i sync email deletions on my iPhone and iMac, and vice versa?
My email provider is Sky in the UK. While i am able to receive the same emails on both devices (imac and iphone) simultaneously, if I delete one on the iphone, it is not deleted on the iMac, and vice versa. I don't want to have to delete emails twice, once on each machine, but rather only once on one machine (and then that email would automatically disappear from the inbox of the other machine).
Is this possible? My sky account is IMAP on the Iphone, but POP on the IMAC. I tried changing it to IMAP on the iMac, but then i couldn't received email messages in MAIL on the iMac so reverted it back to a POP account.
Any advice appreciated. Spent way too many hours today trying to figure this out.
Thanks,
Joeif it were imap on both, you'd be able to delete an email from one device and it would remove it from the other. they can't have different protocols and still sync with each other
-
How to connect an non-hana-ewm with an Hana-ECC and vice versa
Hello,
for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view - are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
How about BODS ? (Didnt work with it yet)
Best regards,
RonaldGreat. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
Thanks
Maybe you are looking for
-
Acquire, display, and write data at 50 samples per second
I have a vi running on a PXI which samples data using two 4220's (all 4 channels) and one 6031 (only 6channels). I am acquiring data at 100 samples per second, but only need to write the data out at 50 samples per second. The data needs to be displ
-
Windows 7 and Chrome not playing some vids
I have a brand-new PC, top spec, running W7 Home Premium (genuine copy), latest version of Google Chrome and showing FlashPlayer ver. 11.7.700.225 installed and apparently running correctly. Video and audio work perfectly in YouTube, but I cannot get
-
32-bit binary does not run on x86_64, ldd not a dynamic executable
Hi, I switched from Ubuntu 8.10 x86_64 to arch linux x86_64 a short while ago and have an issue running 32-bit proprietary binary that dynamically links to some libraries. ldd insists "not a dynamic executable" How am I supposed to resolve the issue?
-
Garageband doesn't "hear" input from microphone... help!
hey, i'm running a mic into a mixer, and running the mixer signal into my ibook with imic... I've modified the "sound" input area of my system preferences for the imic's usb sound input and chosen input and output volumes. having done that, i can see
-
IBook crashing when moved, scr saver etc
For some reason, our iBook G4/1.33ghz/512Mb/OS X 10.4.4 suddenly started to crash/kernel panic crash, 5-6 times per day, often at following occasions: 1) when battery saver screen saver (screen dimmed by power mgmt, not screen savers like Flurry) lea