Setting in Query Designer to close all the levels in hierarchy

Hi,
I got a hierarchy with upto 8 Levels.
In Query Designer i had a Selection Restrictions on hierarchy,I selected few nodes (each will have upto 7 level).
When i execute the report the first node is expanding upto the Level 7 and other nodes are stay close...
I checked and tried all the setting Expand to level 0....etc
Its not working.
How can i achive
When the user executes the report...data will be dispayed and all the restricted nodes will be displayed as closed...and option to the user to expand.
Thanks

Hi SDBI,
Thanks for the Update...
Go to RSH1 transaction. Go to your Hierarchy. Choose your hierarchy in change mode press Hierarchy attributes buttion. Enter 00 as drilldown start level in the new dialog appearing when your press Hierarchy attributes button.
It worked..but not for 00....it worked for '01'.
Could you please explain me in bit detail what is the functionality of that setting...
Thanks in advance

Similar Messages

Close all the open Application in one-shot ?

Is there are any way to close all the open application in one shot in ipad rather than double-click the home button and close the apps one by one.

In principle, I agree with you...
But it appears that reality is not perfect. I observed on iPhone 3 that memory could be pretty clogged from time to time and I needed to restart it to free up memory and get it back to original speed again. It all depends on which apps you are running. Some appears to eat more memory than others. On iPhone 4, it appears to be less of a problem and I have seen that later iOS releases also makes this less of a problem. I only have a first generation iPad, but I have seen that later iOS releases have improved memory handling significantly there as well. However, it appears to be a good idea to reboot the device after a week or two just to flush the memory. I can't prove this theory scientifically, but I do see a difference in memory usage when doing this.
The reason I actually tried "Process Killer" was a tip that it addressed the problems many of us encountered with the first iOS 5 release: frequent crashes and slow performance. After the pretty quickly released iOS 5 update, that wes pretty much solved, but occasionally killing processes actually helped me at that point, It made both my devices more stable.
The original question was about battery performance, there I don't think that the amount of processes running is the key. A much better way of getting more out of your battery is shutting off location services in apps where they are not really needed. I would guess that turning off push notofications for as many apps as possible helps as well.
Also, turn off the Personal Hotspot on iPhone when it's not needed!

Script to Close all the collapsible panels on click of one collapsible panel

Hi All,
Please help me with modifying the script or a new script to suffice the following.
I have around 5 to 6 collapsible panels in many html files. There is a huge content under each panel and thats the reason I want to collapse i.e., close all the open panels and open the panel that is clicked on.
that is initially i click on panel 1 - > Panel 1 opens and contents are displayed.
now I click on panel 2 - > panel 1 should close and panel 2 should open.
Please help me acheive this.
Thanks in advance.

To close the remaining panels you can just use the onclick method and however many panels you have just add them to the list spacing them out with a " , "
Here is an example of 3 panels that close and open, upon clicking on one of the panels.
<div id="CollapsiblePanel1" class="CollapsiblePanel">
<div class="CollapsiblePanelTab" tabindex="0" onclick="CollapsiblePanel2.close(),CollapsiblePanel3.close()">Tab 1</div>
<div class="CollapsiblePanelContent">Long-Sleeve Prices</div></div>
<div id="CollapsiblePanel2" class="CollapsiblePanel">
<div class="CollapsiblePanelTab" tabindex="0" onclick="CollapsiblePanel1.close(),CollapsiblePanel3.close()">Tab 2</div>
<div class="CollapsiblePanelContent">T-Shirt Prices</div>
</div>
<div id="CollapsiblePanel3" class="CollapsiblePanel">
<div class="CollapsiblePanelTab" tabindex="0" onclick="CollapsiblePanel1.close(),CollapsiblePanel2.close()">Tab 3</div>
<div class="CollapsiblePanelContent">Hat Prices</div>
</div>

Before closing down the machine, how can I close all the open programs?

Now that the iMac automauically starts up with the programs in use when closing, I find that this is delaying my start.
There must be a shortcut to close all the open programs before closing the machine.
Kindly advise.

If by 'closing' the machine you mean shutting it down, there is a checkbox in the Shutdown confirmation window which is preset to re-start all apps at startup which were open when the machine was shut down. Uncheck that item in the Shutdown confirmation window.
Unfortunately you'll need to do that each time you shut the machine down.

I sync my iphone with my office computer, but what I really would like to do is syncing only the calendars (because my secretary uses them to set up new apppointments), but syncing all the rest on my home computer. Is it possible without losing apps or mu

I sync my iphone with my office computer, but what I really would like to do is syncing only the calendars (because my secretary uses them to set up new apppointments), but syncing all the rest on my home computer. Is it possible without losing apps or music?

Although not recommended, yes.
Disable automatic syncing when the iPhone is connected with iTunes on each computer.
The only item you will have selected for syncing with iTunes on your computer at work will be Calendars, which is selected under the Info tab for your iPhone sync preferences with iTunes. Nothing else will be selected under the various tabs for your iPhone sync preferences with iTunes on your computer at work. You will get a warning message that your iPhone is associated with another iTunes library on a different computer which you can ignore when syncing calendars/calendar events only with iTunes on your computer at work.

3.5 Query Designer has 'row' in the footer of results but 7.0 has 'page'

3.5 Query Designer has 'row' in the footer of results but 7.0 has 'page' is there a way to change 7.0 to have 'row' instead of 'page'? We would prefer to see how many rows of data we have. I didn't know if this was a parameter they may be able to be changed.
Thanks,
Diane

I donot think there is way to display Row instead of Page.
Also in 7.0. It is based on cells.

How do I close all the apps that are still open?

How do I close all the apps that are still open?

You don't need to.
The "task bar" that Demo mentions above is not, in fact, a task bar at all - it is the Recently Used Apps list. Not all of the apps in this list are open, running or in memory.
iOS automatically handles closing apps that are not in use, so you don't have to manually manage them.
Read this article from Apple for more information: http://support.apple.com/kb/HT4211

Pages wont load half the time have to close all the way and reopen always says conecting this really started to happen after the last 2 updates

pages wont load half the time have to close all the way and reopen always says connecting this really started to happen after the last 2 updates

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Cannot download application world- how to close all the browser windows

i cannot download the blackberry application world "sorry, your session has expired. Please close all of your browser windows and then return to the welcome page to start again." How to close all the browser windows?

Hello numadia
Welcome to BlackBerry Support Forums
Is your problem resolved or you're still having problem with download BlackBerry world !
If you're having problem then just peform a Battery pull restart by removing the battery while your device is Powered On, wait for a min. then reinsert it back after reboot please try it again.
If problem persists then you can also go through this Knowledge Base KB32113
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

An EUL query to list out All the Columns (Fileds) for each Workbook

Hi,
I'm using Discoverer 10.1.2.2 on an Oracle 9.2.0.6.
Does anyone have the EUL query that lists out all the names of Workbook/Worksheets and the names of their fields/columns. I would greatly appreciate it.
Thanks

Hi
While it is not possible to read the workbook itself, whenever Discoverer runs a worksheet so long as you have enabled the gathering of statistics then a row is written to the EUL5_QPP_STATS table. In that table the column called DOC_NAME is the workbook, the column called DOC_DETAILS is the worksheet, with the CREATED_DATE being the date the worksheet was run. There are other encrypted columns in that table that contain the EUL items that were queried.
Look at this code:
SELECT
QS.QS_DOC_OWNER    USER_NAME,
QS.QS_DOC_NAME     WORKBOOK,
QS.QS_DOC_DETAILS WORKSHEET,
TRUNC(QS.QS_CREATED_DATE) DOC_DATE,
*(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 ITEMS,*
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),1, 6)) ITEM1,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),10, 6)) ITEM2,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),19, 6)) ITEM3,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),28, 6)) ITEM4,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),37, 6)) ITEM5,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),46, 6)) ITEM6,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),55, 6)) ITEM7,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),64, 6)) ITEM8,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),73, 6)) ITEM9,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),82, 6)) ITEM10,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),91, 6)) ITEM11,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),100,6)) ITEM12,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),109,6)) ITEM13,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),118,6)) ITEM14,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),127,6)) ITEM15,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),136,6)) ITEM16,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),145,6)) ITEM17,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),154,6)) ITEM18,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),163,6)) ITEM19,
EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),172,6)) ITEM20
FROM
EUL5_QPP_STATS QS--,
--   APPS.FND_USER          USR
WHERE
--   QS.QS_DOC_OWNER = '#' || USR.USER_ID AND
*(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 < 21*
AND QS.QS_CREATED_DATE > '01-JAN-2009';
In order to run this you must have run the EUL5.SQL when connected as the owner of the EUL. This script can be found in the $ORACLE_HOME\Discoverer\Util folder of the machine where the Discoverer Administrator tool is installed.
Try it out for yourself and you will see how it works.
Best wishes
Michael

My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?

My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?

Because GPS has nothing to do with WiFi, cellular signals, or data of any sort. GPS is implemented by signals sent by satellites that are received by GPS receivers. The receivers process the information from the GPS satellites and calculate your location. GPS never sends data anywhere; GPS functionality is receive only.
If you have WiFi or cellular data turned on this can improve the accuracy of GPS, because the GPS receiver can then use the known location of cell towers and WiFi networks to refine the GPS location. GPS by itself has an accuracy of 10 meters, or about 34 feet. Using the additional information from WiFi and cellular data this can be brought down to 3 meters (10 feet). This mode is called Augmented GPS, or A-GPS.

Updates to itunes 10.6.1.7 and quicktime 7.7.1 all the levels in any sound I play on my pc are distorted.

Since updating to itunes 10.6.1.7 and quicktime 7.7.1 (updated both at the same time so not sure which is causing the issue) all the levels in any sound I play on my pc are distorted. The main track in the sound file will be muffled or really soft such as the main vocals in a song. The secondary tracks (harmonies instrumentals etc) are really loud. I thought it was just iTunes, however EVERYTHING has been affected since this update. Windows media player and games, all with the same issue.
Any one experienced this and have any feeback on how to fix it?

problem solved after updating itunes to 10.6.3

How to use evdre to display all the levels under the node user choose

I used SELF,LDEP(6) in the memberset of evdre trying to display all the 6 levels from the top node of NetIncome, all the display all the level with the correct amount except the top node which is displayed in the row key, but all the cell which should be the aggregation of all it's children is blank, if I choose only self, it shows the amount with only top level. how could I all the level and the corresponding amount display?

Hi,
Did you try SELF,ALL ?
Hope it works...
regards,
Raju

Query Designer: Am I on the right Forum?

Hi All,
This is regarding query issue.
Is this the right forum for this issue or is there a forum for that?
Kindly tell me where should i post this kind of issue.
BTW, below is my issue. I'm finding it hard resolving the defect.
Needs advice on this issue.
The user wants a record for a certain organization.
He/she input all the required parameters.
Let's say:
Business leader ID: XXX01
Begin date: 2010, 2011
End date: 2010, 2011
Status: Active
After executing the report, it returns all of the necessary data records.
But when he click on variable screen or change selection, then changes "ONLY" the Business leader ID.
It goes:
Business leader ID: XXY02
Begin date: 2010, 2011
End date: 2010, 2011
Status: Active
No Applicable Data were returned.
User closes the report the reopen.
He initially entered again with the second ID, parameters now are initially:
Business leader ID: XXY02
Begin date: 2010, 2011
End date: 2010, 2011
Status: Active
Then necessary records were returned.
Question: why is it not returning any data records when he/she change the Business leader ID?
That problem arises only when Business Leader ID was being changed.
But when he/she change selection and change the filter on Begin Date, End Date, Status, the report still provide the data.
The report is not refreshing only when Business Leader ID was being changed.
Thanks!

See, on the external, I can't have three folders that all say iTunes music folder, each one belonging to a different user.
Sure you can. Put them in separate folders (John's music, Mary's music and Sam's music).
But you should be creating new iTunes folders, not simply iTunes music folders. The iTunes music folder is in the iTunes folders but so it the iTunes library file.
Any reason you want the music separated? You can put it all in one library. Everyone uses the same and simply create a playlist of the music they want. This way, if you have any of the same music, you won't have it on the computer more than once.

Query Designer is not picking the host:port

Dear All
We have installed BI 7.0 on Netweaver 2004s alongwith BI Java. When we run a query and execute it does not pick the hostname:port but come as
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSD_C03_Q009&VARIABLE_SCREEN=X&DUMMY=1
Please check i have activated all services in SICF and SMICM - all the services is running
and i have added the icm/hsotnamefull in the instance profile also.
is there any thing missing.
Whether PI/Xi is to be also installed and u think it is necessry to configure SLD?
regards
balaji

Japnese yen is maintained in units of 100. Check the entry in TCURX table for Yen. That is why the value is getting multiplied by 100 and getting displayed.
JPY (Japanese Yen) and others have a 0 in the TCURR-CURRDEC field which means 0 decumals. SAP applications will process amounts in these currencies by dividing the input value by 100 for storing in tables. Then, when being displayed, it will do a conversion exit and multiply the stored table value by 100 to show the correct amount.
SAP stores currency values in a data type that has a fixed interpretation of two decimal places. There are some currencies that do not work well with that setting. Usually that is because for some currencies , a fraction o the currency unit is meaningless. That is true of the Japanese Yen, the Turkish Lira, Korean Won and many other currencies whose value is often 10 US cents or less.
Here's a full explanation of the decimal issue in SAP. It is not just
limited to BW but is a system-wide situation.
1. By default there are two decimals on the data base, e.g. 123.45
2. When there is no corresponding entry in TCURX, these two decimals
are displayed in the query.
3. When there is an entry in TCURX, it determines the division factor
when reporting. (default = 2)
Example TCURX = NO ENTRY: Database entry = 123.45
There is no division
The above number is displayed as 123.45
Example TCURX = 3: Database entry = 123.45
There is a division by 10 (because 3 - 2 = 1).
The above number is displayed as 12.345.
example INR currency.
Example TCURX = 0 Database entry = 123.45
There is a division by 0.01 OR Multiplication by 100

Setting in Query Designer to close all the levels in hierarchy

Similar Messages

Maybe you are looking for