Setting Infopath Timeout

Hi Experts,
I am accessing a web service from Infopath 2010 and returning some values back to the form (Inside the webservice I am having one remote function call), Where before returning values I am getting an error from Infopath saying "Failed Connection to datasource".
below is the details
"The query cannot be run for the following DataObject: parkDCNote
InfoPath cannot run the specified query.
InfoPath either cannot connect to the data source or the service has timed out."
I am sure that the remote function call has called since in my log it shows the value I passed from Infopath.
So I think the problem is timeout, Can you please tell me how I can set timeout for Infopath. or tell me how I can solve this problem.
Thanks.

Go to
Central Administration >
Application Management >
Configure InfoPath Forms Services
here you will find
Default data connection timeout: 20000 milliseconds
Maximum data connection timeout: 2000000 milliseconds
http://www.experts-exchange.com/Software/Microsoft_Applications/Q_27532555.html
forgotten to grant access to the two other databases under the stored procedure that I am trying to access

Similar Messages

Set a timeout for "read from text file"

I Need to read from a text file on a remote pc and use the read from text file function to do this. It wotks but sometimes this pc is down causing long wait times in my vi.
Is there a way to set a timeout for the read from text file function, or is there an other solution?
Thank you

You could check that the path is valid first before you attempt to read the file. hen put the file read in a True-False case structure based on the results of the check. You can use the function "Check if File or Folder Exists" It checks whether a file or folder exists on disk at a specified path. This VI works with standard files and folders as well as files in LLB files. The function is found in the File I/O --> Advanced File Functions palette.
Tom

How do i set the timeout value?

I'm doing an insert...in the insert i have a trigger that fires a http put. when i'm doing a couple inserts at a time, it works fine. However if i try to insert about 50 at one time (within msecs of each other) then i get the following error:
ORA-29276 transfer timeout
Cause: Timeout occurred while reading from or writing to a network connection.
Action: Check the remote server or the network to ensure that it responds within the timeout limit. Or increase the timeout value.
My question is, how do i set this timeout value?

FYI,
IFS.PROTOCOLSERVER.SESSION.DEFAULT.Timeout
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
in cup server configuration

How to set HttpURLConnection timeout while reading a stream?

I want it got time out if the connection if lose while i read a stream from URL
try {
     int timeout = 700;
     HttpURLConnection connection = (HttpURLConnection) downloadURl.openConnection();
     connection.setConnectTimeout(timeout);
     connection.setRequestProperty("Range","bytes=" + downloaded + "-");
     connection.connect();
     if (connection.getResponseCode() / 100 != 2) {
          error();
     int contentLength = connection.getContentLength();
     if (contentLength < 1) {
          error();
     if (status == DOWNLOADING){
          if (size == -1) {
               size = contentLength;
          file = new RandomAccessFile(saveTmpName+".tmp", "rw");
          file.seek(downloaded);
     byte buffer[];
     stream = connection.getInputStream();
connection.setReadTimeout(timeout);
     while (status == DOWNLOADING) {
          if (size - downloaded > MAX_BUFFER_SIZE) {
               buffer = new byte[MAX_BUFFER_SIZE];
          } else {
               buffer = new byte[(int)(size - downloaded)];
          int read = stream.read(buffer); // how to set timeout while it is reading stream
          if (read <= 0)
               break;
          file.write(buffer, 0, read);
          downloaded += read;
     if (status == DOWNLOADING) {
          status = COMPLETE;
} catch (SocketTimeoutException e) {
     error();
} catch (IllegalArgumentException e) {
     error();
} catch (Exception e) {
     error();
} finally {
     if (file != null) {
          try {
               file.close();
          } catch (Exception e) {}
     if (stream != null) {
          try {
               stream.close();
          } catch (Exception e) {}
}I try to set "setReadTimeout()" but is still not through timeout Exception

ejp wrote:
Because, there's no FTP client command that allows to do such thing.Socket.setSoTimeout().I agree with you on this one but the OP is talking about the FTPClient API from Apache.
To the OP,
BTW, I have reread the Javadoc about the [*API*|http://commons.apache.org/net/api/org/apache/commons/net/ftp/FTPClient.html] : indeed, there's no setTimeout method, but there is a setDataTimeout method : +Sets the timeout in milliseconds to use when reading from the data connection+ .

Set request timeout for distributed cache

Hi,
Coherence provides 3 parameters we can tune for the distributed cache
tangosol.coherence.distributed.request.timeout      The default client request timeout for distributed cache services
tangosol.coherence.distributed.task.timeout      The default server execution timeout for distributed cache services
tangosol.coherence.distributed.task.hung      the default time before a thread is reported as hung by distributed cache services
It seems these timeout values are used for both system activities (node discovery, data re-balance etc.) and user activities (get, put). We would like to set the request timeout for get/put. But a low threshold like 10 ms sometimes causes the system activities to fail. Is there a way for us to separately set the timeout values? Or even is it possible to setup timeout on individual calls (like get(key, timeout))?
-thanks

Hi,
not necessarily for get and put methods, but for queries, entry-processor and entry-aggregator and invocable agent sending, you can make the sent filter or aggregator or entry-processor or agent implement PriorityTask, which allows you to make QoS expectations known to Coherence. Most or all stock aggregators and entry-processors implement PriorityTask, if I correctly remember.
For more info, look at the documentation of PriorityTask.
Best regards,
Robert

JDBC / JTA Timeouts : How to set a timeout on the fetching of a query ?

Hi !
I'm working on an Application running on Weblogic Server 11g. This app executes a query on an Oracle 11g database ...
The problem is that this query returns millions of records ... and the app fetches the results during tens of minutes.
We would like to set a timeout, wich will abandon the transaction, hang the database connection, destroy the socket ... or anything else ...
This timeout will prevent the thread to become in STUCK state and stucking the weblogic managed server.
Is this possible ?
Thank's for your answers.
Steve.
Edited by: 966918 on 10 avr. 2013 07:18

Abandon timeout will not help. That is only used if a database crashes during the second phase of commit. It specifies how long the transaction manager should keep trying to complete the transaction.
JTA timeout will only work if you are using XA datasources and two-phase commit transactions. When the timeout occurs, it guarantees that the transaction cannot be committed. Eventually, all of the participant resources will be notified and will not allow any more work to take place on the transaction. It does not stop the threads and the application must be written to handle exceptions appropriately.
Edited by: Steve Felts on Apr 17, 2013 8:32 AM

How do set operation timeout in tomcat server?

hi all
suppose i have one endless loop program(jsp) that program run under tomcat server,
so it's keep on runing in tomcat server.
i want, after some time the server send error message like operation timeout.
how do set operation timeout in tomcat server?
if anybody know help me.
my mail id [email protected]

Well, the server.xml file has connection time outs, but that is for idle time, I think... I'm not sure what would happen in a loop... , especially if you are sending some data back to the client in each iteration. Generally you shouldn't be starting a loop that will really run forever. Maybe have some type of counter to break out if something hasn't occurred within x iterations, or create a separate thread that can sleep for x seconds and set a flag to break the loop after that time.

JDBC & setQueryTimeout - or is there another way to set query timeout?

I am trying to set query timeout for TimesTen using jdbc library. But it seems like TimesTen jdbc library does not support setQueryTimeOut. Is there a way to set it without having to set it statically in the DNS?
I tried to set the SqlQueryTimeout in the connection string but it doesn't work either:
     Connection connection = DriverManager.getConnection(
     "jdbc:timesten:client:TTC_SERVER=bleh;TCP_PORT=17013;TTC_Server_DSN=blah;TTC_Timeout=0;SqlQueryTimeout=5;");
Thanks for your help!

Thanks for replying. I don't know have good knowledge on Cache Connect. I will have to read on that first.
It seems like TimesTen does not support jdbc setQueryTimeout. Calling this method on TimesTen jdbc library will return false: supportsQueryTimeout().
I created a test class for testing the SqlQueryTimeout. I set the TTC_Timeout to 400 seconds and SqlQueryTimeOut to 5 seconds. So after 5 seconds it should time out.
The way I test it is by putting a break point before executing the query, do a route add DBServer to an un-connectible gateway to simulate the network delay/connection problem and then continue after I added the route.
After executing the query, instead of timing out after 5 second, it will wait for a few minutes before timing out.
The code for testing the timeout is as follow:
public class TTTest {
     public static void main(String[] args) throws ClassNotFoundException {
     Class.forName("com.timesten.jdbc.TimesTenDriver");
     try {
     Connection connection = DriverManager.getConnection(
     "jdbc:timesten:client:TTC_SERVER=server;TCP_PORT=17013;TTC_Server_DSN=server_dns;"
     + "TTC_Timeout=400;SqlQueryTimeout=5;");
     System.out.println(connection.getClass().getName());
     Statement stmt = connection.createStatement();
     //com.timesten.jdbc.JdbcOdbcStatement stmt = (JdbcOdbcStatement)connection.createStatement();
     System.out.println(stmt.getClass().getName());
     System.out.println("Query started " + new Date());
// Pause here, put a route add and continue
     ResultSet rs = stmt.executeQuery("select count(*) from mse");
     rs.next();
     System.out.println("there are " + rs.getInt(1) + " rows");
     rs.close();
     stmt.close();
     connection.close();
     } catch (Exception x) {
     x.printStackTrace(System.err);
     System.err.println(new Date());
}

Set connection timeout in LightSwitch HTML

Hi.
I am creating Lightswitch HTML application and implementing export functionality using ServerApplicationContext.
I am trying to export a lot of data and i when i call for DB objects I get connection error. I have tried to set ;Connection Timeout=300 in connection string in web.config but it seams like not functioning, and still failing after 30sec.
Can you please guide me where can I set a connection timeout in order to change it's default value from 30 sec to something bigger?

Igor,
I think what you are looking for is "CommandTimeout" and not connection timeout. The connection timeout is how long the SQL Client will wait while establishing a connection. A command timeout is how long the SQL Client will wait for a command to complete.
So if you are executing a long running command, you will run into command timeout issues.
In order to set the command timeout for your SQL data source, add a "key" to your web.config's <appSettings> node of the following form:
<appSettings>
<add key="DataSourceName_CommandTimeout" value="60" />
</appSettings>
Replace DataSourceName with the name of your data source. So if you are using the ApplicationData data source, the key would be named "ApplicationData_CommandTimeout". Look in your Solution Explorer under "Data Sources" for the name of your
data source.
The value is the number in seconds for the timeout.
Eric
http://blogs.msdn.com/b/eric_erhardt/

Setting a timeout for HttpConnection?

Hi,
Is there any way to set a timeout for an HttpConnection instance? I've got something like:
HttpConnection conn = (HttpConnection)Connector.open("www.mysite.com");
but the timeout on my particular device waits 2 minutes! I'd like to make it something more like 20 seconds. Any way to do this?
Thanks

I am surprised that HttpConnection doesn't have a way to timeout already. I searched thru the docs and I cant find any.
Anyway this is my solution. Use a Thread. Start the thread before calling Connector.open. In the run method of the thread, sleep for 20 secs, wake up and display something to the user. This is assuming that your Connector.open is not blocking. i.e its in a thread of its own. this is an example of a non-blocking httpconnection
public void commandAction(Command c, Displayable s) {
        if (c.getLabel().equals("GET")) {
            final MIDlet middy = this;
            new Thread() {
                public void run() {
                    try {
                        //make your http connection here.
                        HttpConnection conn = (HttpConnection)Connector.open("www.mysite.com");
                    } catch (Exception ie) {
                        ie.printStackTrace();
            }.start();
    }of course there are other ways to do that. just my suggestion

Setting initialcontext timeout

Hello
I was wondering if I could set the timeout period for creating
InitialContext?
For example if my server is down and I am trying to get Initial Context
from this server
It takes about 8 minutes to timeout and throws ConnectionException.
I am using WL6.1 sp1
Thanks for your help.

As the thread didn't continue: Has there been a solution ?
I also look for a possibility to set the timeout for InitialContext to approx.
3 sec.
I'm monitoring a LDAP-system and know that everything longer 3 sec is a problem.
If the server is down, it now takes much longer to timeout.
I'm using WL8.1.
Thanks for any help.
"Sree Bodapati" <[email protected]> wrote:
Mark,
Can you elaborate on why you need this?
sree

Setting connection timeout

Anyone know how to set a timeout for a HttpURLConnection?
Thanks,
Ross

RTFM btw :-)Hey, please! Can you explain me what do "RTFM" and "btw" mean? I am newby in English language.... ;-)

Set Command Timeout For SQL Server

Hello,
How do you set the command timeout for the 'open' statement? I am running a Database via SQL Server and I tried the dialog box timeout statement (the check box on the advanced tab) and simply get an error. The manual shows a 'step.commandtimeout' but how is it implemented?
Thanks,
Kevin

Kevin -
I looked at the internal implementation of the CVI SQL Toolkit. The toolkit function that the step type uses is DBNewSQLStatement. Internally to the toolkit the function opens a recordset instead of a command object. The command timeout attribute is only available on a command object and not on a recordset object, so as implemented inside the toolkit the error is appropriate. I think the toolkit could have used a command object to create the recordset object and this would allow the toolkit to let you set the timeout attribute. Unfortuneately this is not the way it was done.
For the future I may investigate to see if there is a way to bypass this limitation by using different toolkit functions, but I am not sure if there a
re any side effects.
Scott Richardson (NI)
Scott Richardson
National Instruments

"set errdisable-timeout" command missing options?

I have a few 4006 switches that do not appear to have all the available errdisable commands (duplex-mismatch is not listed on most) All the 4006's are running at least Cat5.4+, one is running Cat8.4(8)GLX-k9 (output from command listed below) I could not locate any info searching through the docs except that it is listed in the 8.3/8.4 command reference as an option for this command.
SWITCH4006 (enable) set errdisable-timeout enable ?
bpdu-guard BPDU Port-guard
channel-misconfig Channel misconfiguration
udld UDLD
other Reasons other than the above
all Apply errDisable timeout to all reasons
SWITCH4006 (enable)
The above is all that is listed on a 4006 running CatOS 8.4(8)GLX k9. Has anyone else noticed this or have a solution

4500 series 8.4.x does seem to show that option.
http://www.cisco.com/en/US/products/hw/switches/ps4324/products_command_reference_chapter09186a00801f61e2.html#wp1024649
I am not sure if this feature is available for the 4006 in the same version.

How set diff. timeouts for entity beans?

How do i set diff. timeouts for diff. entity beans? Is it in the ejb-jar.xml file? Is this refreshed every time it is accesses?

Hi there,
Although not familiar with all of the App servers on the market, I'd say that you are unlikely to find a timeout value for Entity Beans. Passivation of Entity beans is normally a function of the commit options supported by a specific App server. For example, with Commit Option C an entity bean instance should always be returned to the instance pool after a transaction has completed. You can find details of the various commit options in the EJB specification which you can view or download from:
http://java.sun.com/products/ejb/docs.html
Hope this helps
Amanda
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers

Setting Infopath Timeout

Similar Messages

Maybe you are looking for