Setting IP address on the cFP-1804

Hello,
I just purchased the cFP-1804. I would like to connect it via Ethernet crossover cable to a PC (that will be running LabVIEW). I have connected the cFP-1804 and the PC. The cFP-1804 and PC both indicate that they are connected (i.e. - the cFP-1804 indicates a green LED under 100mbps and a organish LED for active and the PC indicates that a connection is made at 100mbps as seen on the toolbar). When I open MAX and look under "Remote" heading it does not list the default IP address. I have read through most of the help files and it suggested I right click on "remote" and create new. I did so. However, it asked for the IP address of the cFP-1804, I could not find that information nor could I figure out how to determine it. My best guess was to open the windows network connect and see what it read the IP address to be (but I think it may have given me the PC's IP address). I plugged that IP in but it said it could not connect to that device b/c it is not online.
Does anyone know how to properly congiure the cFP-1804 to be recognized by the host computer (i.e.-determine the IP address). I know that in order for the cFP-1804 to appear in MAX the target has to be on the same local subnet as your PC but I am figuring that if they are directly connected they would be. If they are not is there a way to get them on the subnet mask? If not what other methods do I have connected these two devices?
Thanks.

Hi rchaoua,
Do you have NI-FieldPoint installed? Without the FieldPoint driver, MAX
will be unable to detect the cFP-1804. If you need to install the
FieldPoint driver and are using LabVIEW 7.1, 8.0 or 8.2, you can download it
from here.
If you need the FieldPoint driver and are using a different version of LabVIEW,
let me know and I'll be more than happy to help you locate the correct version
of the FieldPoint driver to use.
If you are unsure whether you have the FieldPoint driver installed, expand My
System >> Software in MAX, and if the FieldPoint driver is installed you
will see FieldPoint in the software tree.
Additionally, if your computer has firewalls in addition to the Windows
firewall, that may also be blocking the device from being discovered in
MAX. Make sure all firewalls are turned off as well as any anti-virus
software. On occasion, I have seen anti-virus software prevent devices
from being discovered in MAX.
Please let me know if you need additional assistance.
Message Edited by Ching P. on 10-09-2007 09:00 AM
Regards,
Ching P.
DAQ and Academic Hardware R&D
National Instruments
Attachments:
FieldPoint_Install_MAX.JPG ‏122 KB

Similar Messages

I have an Apple ID with a single e mail address. I want to set multiple addresses in the same ID. Can I? If so how?

I have an Apple ID with a single e mail address. I want to set multiple addresses in the same ID. Can I? If so how?

Howdy there johnzcarp,
As I understand it you want to have more than 1 email address under your Apple ID. You can have what are called Alternate Email addresses associated with your Apple ID and this article will help you get those setup:
Manage your Apple ID primary, rescue, alternate, and notification email addresses
Alternate email address
You can add one or more alternate email addresses for use with Apple services such as Game Center, FaceTime, Find My Friends, iMessage, and OS X notifications.
Go to My Apple ID (appleid.apple.com).
Select “Manage your Apple ID” and sign in.
Add an alternate address:
Select Add Email Address, then enter your alternate address. Apple will send a verification email to that address. Didn't receive the email?
Follow the instructions in the email to verify the address.
Edit an alternate address:
Select Edit next to the address, then enter the new address. Apple will send a verification email to that address. Didn't receive the email?
Follow the instructions in the email to verify the address.
Delete an alternate address: Select Delete next to the address.
Thank you for using Apple Support Communities.
Take care,
Sterling

Set default address when card contains several

If someone in your address book has multiple email addresses, how do you set which address is the primary one to which email is sent? (Or does it go to all addresses?)

never answered... just cleaning up unanswered questions

HT204053 I have an iPhone 4S and the new Apple TV, both setup with my email as the Apple ID. I gave my wife an iPad 3 and set it up using her email address as the Apple ID. Is a second iTumes Match subscription required for her to use our music from iCl

I have an iPhone 4S and the latest Apple TV, both setup with my email address as the Apple ID. I subscribed to iTunes Match so our music could be played from iCloud. I gave my wife an iPad 3 and set it up using her email address as the Apple ID. When I try to turn on iMatch so she can play our music from iCloud on her new iPad it tells me that she needs a subscription to iTunes Match. Is it Apple's intent that we would need two iTunes Match subscriptions? If not, how do I accomplish what I want to get done?

The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

HT204053 I need to change my i cloud e-mail address to the same one I set up when I purchased my apple account I just created an I cloud address and when Ijust read the set up for I cloud it says I should use the same e-mail address that I started with H

I did not know that when I created a e-mail address that I was suppose to use the same one that I created when I first signed up with Apple I phone. I want to change my e-mail address to the one I first had How can I change it? I do not need two e-mail accounts It should have read that when you are setting up an e-mail address use the one that you first signed up with. Not after you go through all the set ups for I cloud it tells you at the end to use your account that you first started with. Can you please help me I am new at this and I still can not set up on my computer with my phone to I cloud so if I had my phone stollen I can find it I also have and I pad to set up yet It is 3 days and I still can not set it up
Thank You and Hoplefully I can change my e-mail address so I can have everything on one account

If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.

My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to set my new one up is that the Apple ID is already in use. How do I set up with our shared e-mail account

My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to initiate setup is that the Apple ID is already in use. Any ideas on how to complete the setup of the new iPad since we both share the e-mail account?

If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.

How do I set up two email address on the same account?

Using Mail in Mac OS X 10.6.2 and moving to Mac for the first time, I have been unable to set up two email addresses on the same account. Entering them, separated by commas, as advised in the Help does not seem to work. I have tried making them both the same password and have tried separating the passwords with a comma but no luck. Unable to set up another account for the second address because it correctly tells me that the account already exists.
Is there a way?
Thanks for any help.
AllanGlen

After a comprehensive trial and error session, using a new Guest Account each time to be sure of no contamination from the previous trial, I have finally cracked it!
The problem was logging on to the outgoing server.
Setting up the first account was fairly straightforward but if I allow Mail to do it automatically I am unable to send because Mail has defaulted to 'Authentication Required' when my server does not require it. Setting the account manually without authentication enables send and receive to work OK.
If i try to set up the second account automatically, Mail crashes.
If I set it up manually and choose 'No Authentication', Mail crashes.
If I set it up manually and choose 'Authentication Required' and enter the full email address as the User Name together with password, Mail crashes.
If I set it up manually and choose 'Authentication Required' and enter the first part of the email address together with password, Mail crashes.
However, if I set it up manually and choose 'Authentication Required' and enter the first part of the email address as User Name and no password, Mail accepts it and sets up the account.
At this point the account receives mail but cannot send it.
If I go into the Mail preferences and try to edit the outgoing server details, Mail will not accept no Authentication.
I eventually found that if I uncheck the 'Always Use This Server' box, all account then use the server on the first account, which is correctly set up.
Now I have my four email accounts all able send and receive.
One little concern remains. In Outlook Express I could look at the properties of a received email and see what address it had come from, together with many other details. I haven't found out yet whether this can be done in Mail. I just wonder whether if I reply to some email, it will appear to have come from a different address from the one it was sent to.
Thanks again for all the inputs.
Allan

I cannot get my e-mail to automatically enter addresses in the "TO:" box. In the past, I would get a list of e-mail recipients to appear when I typed 1 letter. That function no longer works. Do I need to change a setting or what?

I cannot get my e-mail to automatically enter addresses in the "TO:" box. In the past, I would get a list of e-mail recipients to appear when I typed 1 letter. That function no longer works. Do I need to change a setting or what?

Settings > Store > Sign Out.
Sign in with the correct ID.

How to get the cFP IP Address?

Hi, I have a VI running standalone at a cFP 2020, and I can access the front panel using webserver. But to access these VI, I need to know the cFP 2020 IP address. This way, I'm leaving a fixed IP Adress. Now I want to put this cFP inside the company net, and, to do this, I'll select the "Obtain IP address from DHCP server" from the IP settings. But, doing it, if I know the cFP controller name, there's a way to discover the IP address?

Try using String to IP followed by IP to String (and select dot notation). I believe the name should be resolved correctly.
Try to take over the world!

My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

HT1267 HAVE SET UP AN INCORRECT EMAIL ADDRESS. The call centre set up a new email address as the Username. I am unable to access the new account because the default on my phone is the email that is incorrect. How do I get the correct email as default

I HAVE SET UP AN INCORRECT EMAIL ADDRESS. The call centre set up a new email address as the Username. I am unable to access the new account because the default on my phone is the email that is incorrect. How do I get the correct email as default??

Thank you for your help, much appreciated
Regards
Geoff

I first thought the Ipad would be used by my wife so I set up her email account. She didn't use it that much so I did and set up my accounts and took her off. Now when I send an email it shows her address as the sending party - how do I fix this

I first thought the Ipad would be used by my wife so I set up her email account. She didn't use it that much so I did and set up my accounts and took her off. Now when I send an email it shows her address as the sending party (some of the time and I don't know why only some of the time) - how do I fix this

Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
SHARING iTunes MUSIC
http://macmost.com/five-ways-to-share-music-in-itunes.html
Also... Create your Own Apple ID for Your iPhone...
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
And... Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
See Here for > How to Use Multiple iDevices with One Computer
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha

My i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting general

my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution

restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired

What is the second, third, etc. next-hop address in the route-map set command for?

What is the second, third, etc. next-hop address in the route-map set command for?
route-map TEST_PBR permit 10 match
match ip address 101
router(config-route-map)#set ip next-hop 1.1.1.1 ?
A.B.C.D IP address of next hop

Hi,
You may get your answer in below link
http://www.groupstudy.com/archives/ccielab/200812/msg00999.html
First next-hop will be used unless until that is not unreachable. If first is unreachable, then next one will be used. Since these next-hops are directly connected, router can easily come to know whether they are active or not. In case you want to set some loopback ip as next-hop then you need to use keyword recursive "set ip next-hop recursive"
--Pls dont forget to rate helpful posts--
Regards,
Akash

Setting IP address on the cFP-1804

Similar Messages

Maybe you are looking for