Setting Isolate Report/Page sections and Isolate Group sections using SDK

Hi all,
Has anyone exported the report to CSV format, by setting Isolate Report/Page sections and Isolate Group sections programmatically. If so, to which object should i set, and what are the methods to do
this ? The CSV exported report contains lots of these sections, along with the actual data, so i am
trying to suppress these other data in the exported file.
I am using BOE SDK.
cheers
Nithy

Hi Nithy,
RAS SDKs may help you to achive your task.
I would suggest you to see setGroupSectionsOption and setReportSectionsOption of CharacterSeparatedValuesExportFormatOptions class given in RAS APIs.
Anu

Similar Messages

  • Conditionally add a page dependant on next group section

    Dear Forum
    I have a report in the format
    RH
      PH
         GH1
            GH2
               GH3
                  Detail
               GF3
             GF2 (If next group section = GF1 do not add a page. If Next group section any thing else add page)
          GF1
    I seem to have an issue determining the next group section at GF2
    is this possible?
    Are there any functions avaialble to ascertain the next displayed section on a report
    Thank you for your help as ever
    With Kind Regards
    Paul Marks

    hey Paul,
    you can figure this out using field values, though it's a bit of work as you'll have to create formulas for each group.
    as an example, if you want to figure out if Group Footer 1 is the next section:
    GF1 will appear next if the field value for Group 1 will be changing...place this formula in your GF2 section as a test...change the field value in the formula to whatever your Group 1 field is....
    {{Customer.Country} <> next({Customer.Country})
    you'll get a true when the next section will be GF1.
    cheers,
    jamie

  • In contacts section for the groups section i want to delete old groups i have on the phone and then add a new group for easy access for work contacts for calling. rather then searching each individual contact when needed. is this possible?

    i currently have about 6 different groups listed on the iphone in my contact list section and i want to delete the old ones and create a new group for work puposes!
    i dont want any apps all i want is something similar to my favourites list but in a group so i can just go into that work group and scroll to the person i need to call and this way seperating my personal and work contacts.
    because i do alot of calls from my car i dont want to have to search my contact lists to find the right person i just want them all in a simple folder.
    is this possible because if i already have groups on my iphone i should be able to delete the old ones and create a new one?

    Deleting groups on the phone and creating new ones is not supported with iOS4, you'll have to do that on your computer and sync again.
    Let's see if they changed that in iOS5 when it is released.

  • Problems starting Crystal Reports Page Server and Report Application Server

    Hi,
    We have migrated to a new server and I have re-installed our Crystal Reports Server XI R1.
    It is being installed on a Windows 2003 SBS Premium Server with MSSQL 2005 Workstation Edition
    I have been told that I need to start the following Crystal services after installation.
    1) Crystal Reports Page Server
    2) Report Application Server
    These services simply wont start
    When I try to start Crystal Reports Page Server, I get a Visual Studio Just-In-Time Debugger window that says...
    An unhandled Win32 exception occured in pageserver.exe [14892], subsequently, another window pops up [svrmgr] that says
    "The service did not respond to the start or control request in a timely fashion"
    Also, when I try to start the Report Application Server, I get another VS JIT debugger window that says
    An unhandled win32 exception occurred in crystalras.exe [12748]
    I also get the same SvcMgr Window that says..."The service did not respond to the start or control request in a timely fashion"
    Thanks all
    Paul

    Hello Paul,
    I recommend to post this question to [the dedicated BusinessObjects Enterprise Administration forum|BI Platform;.
    That forum is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Thanks
    Falk

  • Report of Users and their groups

    Hi Experts,
    Is there a way to extract all the Hyperion Planning Users and the groups they belong in Hyperion 11.1.2.1 version? I need an excel file having the users and groups.
    Thanks
    Kannan.

    Hello Kannan,
    Yes, a clean list of Users with their Groups...
    Nothing standard. Strange...
    You might see if this export has something you can use. I do not recall it from the vast amount of detail exported here. The file will be generated on the server, so you might need somebody to pick it up and give it to you.
    MaxL command
    export security_file to data_file "essbase_security_file.txt";
    The alternative is to query the Planning repository. Maybe somebody has experience with this?
    Regards,
    Philip

  • How do I set the Home Page for a newly open tab using the File Tab Menu??

    When I open a new tab, is there a way to set the home page the new tab will use when it is opened, or will new tabs always be opened as blank pages?

    I have new windows opening when I click on a link. Or when I click on the FF-Icon. New windows are the default setting.
    When a new window opens, I get a Google home page and can instantly type in a search phrase.
    With the above in mind, sometimes I want to keep search classes in the same window. In a sense I'm using the Window with no tabs, to generate a tab by using the File Tab option.
    When a Tab is selected where new windows will launch a new page, and not a new tab, the process of forcing a new tab onto the window will produce a tab page that is Blank, and the new tab label description displayed in the tab area shows the words "New Tab". That tab's URL address bar is blank. Zip - nothing displayed.
    When a blank page tab appears, I click on the HOME button you helped me remodel, and the "New Tab" description in the tab label area changes from "New Tab" to "Google".
    My question was to ask, if there was a way I could do something to make FF4 do that Home page assignment on its own. In the early FF days I found you could sometimes go into the bowels of FF, find some form of INI or SETTINGS type file, look for a Keyword reference that would tell FF to do something different, and Viola, emotional issue resolved. In this case, I'm trying to "Gild the Lilly" by asking if you, or someone else might have a rabbit they can pull out of their hat, just like you did when you helped me move my Home button, and have that rabbit show me how to do something that default FF-Options section doesn't support.
    Did I do a better job of explaining the issue this time?
    Thanks again for the response.
    When I

  • Reporting width scale and change group

    I have a chart data source for 25 columns and assign to my line chart data source.
    The chart shows data but only use 50 percent of the chart width.
    I would like to have my chart extend the full width of the report which is landscape orientation.
    Are there any property to set stretch the whole width?
    My report has group like element 1, element 2. Chart has evaluation group property to set.
    I set it to my group name which is MyElement, but it seems that the chart prints the same chart for the all group.
    Are there any property to set the the chart print different chart base on the group.
    I have my chart in Group Footer. Should I have it in detail band?
    Thanks a million for the information and help,
    Regards,
    Iccsi,

    What would be the best way to do that? As an example I would have 8 textframes threaded together (each frame is a stamp, this script is for reducing the image to print the label that goes on the top of the stamp). Some frames could only be text, some only a graphic, some both, some blank. Below is an example of what have so far. This works if the frame is only text.
    Thanks,
    Archie
    Rem SCALE ITEMS FUNCTION
    Rem --------------------
    Function myScaleItems (myLabelDocument)
    For I = 4 to 11
    myLabelDocument.textframes.item(I).locked = False
    myLabelDocument.textframes.item(I).HorizontalScale = cInt(myLabelPercent)
    myLabelDocument.textframes.item(I).VerticalScale = cInt(myLabelPercent)
    Next
    End Function

  • Setting the Brushed Metal look and feel for macs using Java.

    Hello,
    I am relatively new to Java and I am new to Mac-specific java stuff. Anyways, when I try to set the look and feel of my classes to the "apple.awt.brushMetalLook" look and feel, I am unable to. It works if I have System.setProperty("apple.awt.brushMetalLook", "true"); written before I create any swing component. This would be fine, except that means that it is impossible to extend any swing component, such as JFrame or JApplet. Is there a way around this?
    Thanks!

    This might answer your question:
    http://lists.apple.com/archives/Java-dev/2003/Apr/msg00829.html

  • How to Use API to create Page/Book and etc. rather than using Workshop

    Hi Anyone,
    Can anyone suggest me where I can get sample using Bea API to create such as Book/Page and etc..
    I can not find from eDoc that bea provide.
    Thanks
    Mark

    Looks like your fetch_user into l_developer_role overwrites its default value and then your use of lv_developer_role in edit_user passes in null.
    Scott

  • In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

    Adobe Acrobat 9 Pro V9.4.0
    Win7 Pro x64
    Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
    Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
    Thanks in advance.

    See my response to this post

  • History report page prints before printing each new document?cc=us

    How do i stop my HP Officejet 6700  Premium from printing a history report page before printing each new document, using Windows 7 & Using Microsoft Word? When I open a document and print it, it prints a history including: File Name; Directory; Template; Title; Subject; Keywords; Comments; creation Date; Change Number; Last Saved On; Last Saved By; Total Editing; Last Printed On; As of Last Printing....
    Everything worked perfectly for a year, then I had to reinstall the printer because I deleted it by mistake. I cary it with me when I travel to meetings and didn't have my install disk, so I had to download the install software. I haven't changed any settings in Word, but it appears that the report is generated from Word.
    Help will be appreciated. I can't find any other topic like mine to see an already presented solution.
    This question was solved.
    View Solution.

    Hi,
    The report indeed being generated by Word and not by the pritner driver.
    As you did not clarify your MS Office version I included the steps for Word 2010, I believe the same should also apply for Word 2007:
    From Word click the File menu, then select Options.
    Select Display from the left pane.
    Under the Printing Options sections, uncheck the box next to Print document properties.
    Click OK and try printing again.
    If you cannot find the specific option, please clarify your exact Microsoft Wiord version.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Page Up and Page Down keys

    I converted a forms 5.0 program to Forms 6.0.
    Strangely my PageUp and PageDown keys are not working any more. In forms 5.0, Pageup and Page down keys automatically scroll my records. But in forms 6.0 they do not work.
    I tried the ScrDown, SCRUp triggers to associate them to PageUpa and PageDown but it did not work. Can any one suggest me how I can make my PageUp and PageDown keys in forms 6.0?
    Thank you and best regards,
    null

    Now I'm not sure how to isolate problem... I should have done [next tip ahead] before, but thought what I tried before was sufficient.
    I opened a long 'text' file in the browser to see how the Page Up, Page Dn & arrow keys would work, and they appear to work fine. But on 'html' pages of popular websites, the keys do not work right. The arrow keys don't work at all sometimes, and the Page Up, Page Dn keys sometimes work in 'semaphore' fashion; that is, pressing Page Up 'once' does nothing, then 2nd time, page moves up; 3rd time, nothing; 4th time, page moves up, etc.
    (Note: I also tried changing the 2 'scroll' related settings in Tools>Options>Advanced>General, but those had no effect. I left both 'on".)
    [Also, I never use Tab & Ctrl keys for scrolling, and using them now does not affect anything.] This is only about the Page Up Page Dn and arrow keys, which used to work fine pre-8.0.1, and now do not work as expected.

  • How to stop to display the main report page header in the subreport!

    Hello all,
    I have an existed report that display the CR page header on every page of the report. Now I added another subreport into report footer without using link. How do I stop to display the main report page header and display the subreport in the new page with subreport header only? I really appreciate your time to help me out on this issue. Thanks.

    Hi,
    I tried to supress the page header with (onlastrecord and TotalpageCount > 1) condition, but the last page of main report without page header. I still like the page header display on last record, but not on the subreport only. How do I get it? Thanks in advance.

  • XI - Can I Add Page Up and Down Buttons Back?

    I just updated to XI and the page up and down buttons that used to be on the toolbar are gone.  Is there a way to add them back?
    Thank you.

    You can customize the tool bar like any other program. You are given a standard basic set of tool bar buttons and you can customize it as needed.
    Customizing Toolbars in Acrobat X
    Enterprise Toolbar Customization in Acrobat and Reader X

  • Setting a report as a background

    Hi ALL
             Please give me the clear steps how to set a report to run as background with variants using sm36 and sm37 (if possible with example)
    By
    Prashanth

    You can use SM36 and use the "Job Wizard" to define a background job in simple step by step procedure
    Or
    Goto SM37 and specify a job name.
    Next specify the ABAP Program Name of the report you want to execute under Job Step.
    Then click on "Extended Job Selection" and goto the Period Tab.
    There select "Only Periodic Jobs" and then specify the frequency of execution based on Months, Weeks, Days, Hours or Minutes.
    2)you can execute the report in background in SM37 , there are two options , one is as said using f9 or you can make SY-BATCH eq 'X'.
    if x run the report or exit from the program.
    so this way you can execute the report in background and check the spool in sm37
    In order to restrict the user to run it only in background , you can as well check for SY-BATCH condition.
    The other way is try to remove "execute in foreground" option from the menu and this can be done with the function module .
    Do reward points if useful and close the thread if the doubt is cleared
    data: begin of int_exc occurs 0,
    code like sy-ucomm,
    end of int_exc.
    data wf_repid .
    initialization.
    clear int_exc.
    int_exc-code = 'ONLI'.
    append int_exc.
    int_exc-code = 'PRIN'.
    append int_exc.
    move: sy-repid to wf_repid .
    call function 'RS_SET_SELSCREEN_STATUS'
    exporting
    p_status = '%_00'
    p_program = 'wf_repid'
    tables
    p_exclude = int_exc
    Hope this helps,

Maybe you are looking for