Setting Issues

I am working for an office in which I am charged with emailing the owner PDF documents that contain daily reports. I need to know if there is a way that I can set adobe so that when he open the attachment it opens at a certain level of zoom. For example... 59 % zoom makes it so that these docs are viewable one entire page at a time. So basically I need to be able to save a setting on my computer and when the file is opened on a different computer it automatically opens to the size I was viewing it in. Can anybody help me? Is this possible?

Bernd Alheit wrote:
In the scan dialog of Acrobat you can also append the scan to a existing document.
That's another good way. I had forgot about that since I don't do a lot of scanning these days.

Similar Messages

  • Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

    Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

    Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
    Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
    I hope that will work.

  • My nano Gen 6 just loses volume for no reason, one minute I hear the music the other it's gone, I have to raise the volume manually. Is it a setting issue or a defect? Thanks

    My nano 6g just loses volume for no reason, one minute I hear the music the other it's gone, I have to raise the volume manually. Is it a setting issue or a defect? Thanks

    If your ipod gets wet, it can cause the buttons to activate all by themselves. This can cause the volume to go up, down.
    If you have a headset with buttons on the wire, check there first. Try a different set of headphones and see what the result is.
    Finally, if the volume is changing a huge amount but only for certain tracks, there is an adjustment you can make on individual tracks in iTunes. Do a get info on one of the tracks doing this, then click the Options tab. Note that there is a volume adjustment slider. Make sure it is set to none.
    i

  • When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice.  I'm sure it's a simple setting issue. Any thoughts ???

    When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice.  I'm sure it's a simple setting issue. Any thoughts ???

    have the same issue on my 9630 after upgrading to 624 version. It momentarily shows the previously callers information before showing the new caller's info.

  • When trying to logout, I keep getting "the application safari canceled logout" even though I am not in Safari. This only recently started happening and I'm wondering if it is a setting issue or bug. Can someone tell me what to do?

    When trying to logout, I keep getting "the application safari canceled logout" even though I am not in Safari. This only recently started happening and I'm wondering if it is a setting issue or bug. Can someone tell me what to do?

    You don't have to be "in" Safari for it to cancel logout.
    You have several different Applications open, and any one of them may cancel logout if conditions are just right.
    Quit the Applications you are no longer using and your Mac will run better and faster. And it will logout instead of cancelling.

  • Oracle 10g db character set issue

    I have a database 10g with database character set western
    european "WE8ISO8859P1" and we are receiving data from source
    database with database character set as "UTF8" during data load
    for one of the tables we receive the following error "ORA-29275:
    partial multibyte character" I understand this might be due to
    the fact western european character set is not a subset/superset
    of UTF8 .Am i right ? What would be the way around this ?

    It is certainly possible that the issue is that your database characterset is a subset of UTF8.
    How are you getting the data? Are we talking about a flat file? A query over a database link? Something else?
    Does the data you're getting contain characters that cannot be represented in the ISO-8859 1 character set? It is quite common to send UTF-8 encoded files even when the underlying data is representable in other 8-bit character sets (like ISO-8859 1).
    What are you trying to do with the data? Are you trying to load it into a CHAR/ VARCHAR2 column? A CLOB? A BLOB? An NCHAR/ NVARCHAR2? Something else?
    Justin

  • Language setting issue with Xcelsius 2008 - Web Service NW BI

    French language is set during Xcelsius installation.
    In Xcelsius, English is always set as the preference language.
    With Web Service NW BI, I get text data returned in French.
    English is also defined as  default language in SAP BW BI .
    I would like to get text data in English.
    I don't get this situation when executing the same dashboard in an another PC with only english installation.
    Can someone could explain to me how to solve this issue ?
    Thanks in advance
    Mai

    Hi Sana,
    You might be using Flex 3 sdk library files.
    Just check in Properies of your Flex project -> Flex Build Path -> Library Path .
    You might get the library files as Flex 3.*
    If it is the case then change it to Flex 2.0.1 Hotfix 3.
    now create a new project and compile your application and use the same swf.
    Otherwise try to import any existing Flex 2 project folder with compiler flex 2 ver. then try the same swf in your xcelsius application.
    Regards,
    Vivek

  • Lost ability to move items between spaces with gestures after 10.7 download.  Setting issue or glitch?

    I downloaded OSX 10.7.2 like the rest of the world and besides icloud conversion issues I noticed that I could not move items (files, jpg's, etc.,) from one "Space" (desktop) to another.  I've gone through all the "gesture" settings in the System prefs and there's nothing to do with it.  Using the key fuctions (Control + 1, 2, 3) still allows for moving objects while you have it selected, however if you select any object with the trackpad no gestures work.  Anyone else seen this issue? Is there a setting that I've missed?

    I have absolutely the same problem since the last update. However I really think it is a glitch, because after stubbornly trying dragging a file while using the multi gestures I discovered the following:
    • It works only if you grab the file in the moment you use the multi gesture. It’s like a cat and mice game :D, I wouldn’t say it is a workaround, but just a proof that probably they will fix it.

  • 9i Character Set Issues

    Hi All,
    I have a done a search through the forums on this topic, and revealed many answers to my question, however I need some more information to help me resolve an Issue.
    Here goes...
    Our company has a French/Canadian client that has installed 9i with the characterset of WE8DEC. The software that we wrote and provided them with does not support this characterset, and in turn they are seeing inverted question marks in place of some characters (Usually accented characters).
    Basically, I want to understand the options that our client has in terms of possible solutions.
    I understand that the characterset can only be altered in the database to a superset of the current characterset, so this affords us no option in this regard.
    My suggestions so far, is to create a new database and transfer the data accross, however will this actually cure the issue? Will the data transfer accross and convert into it's correct character? or will it just transfer as an inverted "?".
    Would an upgrade to 10g help them? Or would the issue remain?
    Is there anything that can be done on the O/S or Client level to rectify this?
    All help greatly appreciated!
    Thanks.

    user10498503 wrote:
    Hi All,
    I have a done a search through the forums on this topic, and revealed many answers to my question, however I need some more information to help me resolve an Issue.
    Here goes...
    Our company has a French/Canadian client that has installed 9i with the characterset of WE8DEC. The software that we wrote and provided them with does not support this characterset, and in turn they are seeing inverted question marks in place of some characters (Usually accented characters).
    Basically, I want to understand the options that our client has in terms of possible solutions.
    I understand that the characterset can only be altered in the database to a superset of the current characterset, so this affords us no option in this regard.
    My suggestions so far, is to create a new database and transfer the data accross, however will this actually cure the issue? Will the data transfer accross and convert into it's correct character? or will it just transfer as an inverted "?".Your issue has a client side component (the NLS_LANG setting already mentioned here) and a potential server side component (corrupted/invalid data in the database), depending on what happened so far.
    The client side issue could lead to corrupted data in the database, and there is no way of "correcting" this automatically, even if you move to a new database using a different character set on 9i, or upgrade to 10g.
    If a client that writes into the database uses a wrong NLS_LANG setting, you're potentially ending up with corrupted data in the database.
    If a client that reads data from the database uses a wrong NLS_LANG setting, you're potentially ending up with corrupted data on the front end application (the typical "?" question mark).
    All this has nothing to do yet if your database character set is actually capable of storing the characters you attempt to store from the client side.
    So I think you first need to determine if your database contains invalid data using the "CSSCAN" utility. For more information, check the manuals and MetaLink:
    http://download.oracle.com/docs/cd/B10501_01/server.920/a96529/ch11.htm
    Depending on your findings you'll find the possible actions on MetaLink.
    Then you should determine if your client NLS_LANG is appropriate. There is a very good FAQ available here how to check the current setting and determine the correct setting:
    http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

  • German character set issues on Solaris

    Hi,
    I am facing an issue with German character settings with my Java application on a solaris box.
    When I run my application on the box, and I pass an input file with German special characters they get converted as ?. However, other normal English characters are formed properly.
    When I run the same application on another Solaris box with a different JRE, the German characters are formed properly.
    I understand that there is a difference in the archiecture between the 2 boxes ie.e
    64 bit SPARC machine v/s 32 bit x86 machine
    the JRE
    1.4.2_03(64bit) v/s 1.4.1_01
    I am tryinbg to evaludate further differences between the 2 environments to pinpoint the issue, and get this resolved on the 1st box.
    Can anyone provide me any inputs?
    Lavin

    When you read the file, please point out what character set using. For example:
    FileInputStream fstream = new FileInputStream(url.getFile());
    DataInputStream in = new DataInputStream(fstream);
    BufferedReader br = new BufferedReader(new InputStreamReader(in, Charset.forName("ISO-8859-1")));
    br.readLine();
    This link possibly can help you.
    http://www.velocityreviews.com/forums/t126128-jdk-14-character-set-change.html

  • Getting NLS setting issues when calling procedure

    Hi,
    Can anybody suggest me what could the problem in the below issue?.
    i am invokeing procedure using DBAdapter. My soa version is 11.1.1.5. When i am calling procedure first time it is working fine. But when i am invoke second time
    it is showing below error. I observed that i am getting error alternativly. So kinldy advice me what could be the issue.
    Error:
    Cause: java.sql.SQLException: ORA-20001: Oracle error -20001: ORA-20001: Oracle error -2074: ORA-02074: cannot SET NLS in a distributed transaction has been detected in fnd_global.set_nls.set_parameter('NLS_LANGUAGE','AMERICAN'). has been detected in fnd_global.set_nls. ORA-06512: at "APPS.APP_EXCEPTION", line 72 ORA-06512: at "APPS.FND_GLOBAL", line 240 ORA-06512: at "APPS.FND_GLOBAL", line 1410 ORA-06512: at "APPS.FND_GLOBAL", line 1655 ORA-06512: at "APPS.FND_GLOBAL", line 2171 ORA-06512: at "APPS.FND_GLOBAL", line 2313 ORA-06512: at "APPS.FND_GLOBAL", line 2251 ORA-06512: at
    Regards,
    Adhi

    Hi:
    Another way to avoid this, is to use an Non-XA Datasource.
    Hope this helps
    best

  • Urgent :SQL Loader Arabic Character Set Issue

    HI all,
    I am loading arabic characters into my database using SQL Loader using a fixed length data file. I had set my characterset and NLS_LANG set to UTF8.When I try to load the chararacter 'B' in arabic data i.e. ' لا ' , it gets loaded as junk in the table. All other characters are loaded correctly. Please help me in this issue and its very urgent.
    Thanks,
    Karthik

    Hi,
    Thanks for the responses.
    Even after setting the characterset to arabic and the problem continues to persist. This problem occurs only with the character "b".
    Please find my sample control file,input file and nls_parameters below:
    My control file
    LOAD DATA
    characterset UTF8
    LENGTH SEMANTICS CHAR
    BYTEORDER little endian
    INFILE 'C:\sample tape files\ARAB.txt'
    replace INTO TABLE user1
    TRAILING NULLCOLS
    name POSITION(1:2) CHAR(1),
    id POSITION (3:3) CHAR(1) ,
    salary POSITION (4:5) CHAR(2)
    My Input file - Fixed Format
    ?a01
    ??b02
    ?c03
    The ? indicates arabic characters.Arabic fonts must be installed to view them.
    NLS_PARAMETERS
    PARAMETER     VALUE
    NLS_LANGUAGE     ARABIC
    NLS_TERRITORY     UNITED ARAB EMIRATES
    NLS_CURRENCY     ?.?.
    NLS_ISO_CURRENCY     UNITED ARAB EMIRATES
    NLS_NUMERIC_CHARACTERS     .,
    NLS_CALENDAR     GREGORIAN
    NLS_DATE_FORMAT     DD/MM/RR
    NLS_DATE_LANGUAGE     ARABIC
    NLS_SORT     ARABIC
    NLS_TIME_FORMAT     HH12:MI:SSXFF PM
    NLS_TIMESTAMP_FORMAT     DD/MM/RR HH12:MI:SSXFF PM
    NLS_TIME_TZ_FORMAT     HH12:MI:SSXFF PM TZR
    NLS_TIMESTAMP_TZ_FORMAT     DD/MM/RR HH12:MI:SSXFF PM TZR
    NLS_DUAL_CURRENCY     ?.?.
    NLS_COMP     BINARY
    NLS_LENGTH_SEMANTICS     CHAR
    NLS_NCHAR_CONV_EXCP     FALSE

  • SETS Issue T-code GR55

    Dear Experts,
    I have an issue with a SET which is created by me in test systems.
    I have created the SET using T-code GS01 and assigned the SET to a report.
    When i am checking the total ALL BA column, the New SET amount is not getting added in the Total ALL BA Column.
    Basically, the new SET Amount should get added in the Total ALL BA Column but in my case it is not happening.
    Please provide your inputs, if i need to add any formula and in my case the report which is having my NEW SET is not related to a Report painter.
    Thanks
    Sreekanth

    Hi sreekanth
       1 . normally we will use set GS01 ,to control the transaction codes (t.code) for specific report
        2. this is mainly used for special ledger purpose substitution for FI and CO , you can create this fi sub ledger document in gb01 .
        3. control and restricts the user level. eg: if some user enter wrong values that time based on setting which we have maintained in OBBH/OB28 . it will through the error masg
    you can set the codes based on your requirement

  • Char Set Issue

    Hi Guys,
    I have an issue with reading some binary data (BLOB) from the a database. The field contains a huge string with a series of line feeds (new line indicators) in the middle. Now I retrieve the info from database and display the string on screen, but the screen shows the string displayed as one long line. I have a feeling I am not using the right character set, but I am not entirely sure what to do. The code looks like this;
    if(rs != null){
                        while(rs.next()){
                              InputStream bodyOut = rs.getBinaryStream("STMT_INFO_BLOB");
                            if(bodyOut != null){
                                // Get bytes from the BLOB using a stream
                                BufferedReader br = new BufferedReader(new InputStreamReader(bodyOut));
                                String c;
                                //append the data to a string buffer
                               while((c = br.readLine()) != null){
                                    infoStr.append(c);
                   System.out.println(infoStr.toString());Displaying the String on screen is on the first part of my application. I want to send the string as an array of bytes to another application. However, I want to preserve the line feeds when converting to the byte array and sending it through. I would really appreciate some advice on what I need to do to achieve this.
    Thank You

    Aegis1888 wrote:
    Ahhh, okay. thank you very much. That works fine except some of the characters in the string are displayed with a question mark (?) or other obscure mark. I'm assuming this means that I'm using the wrong encoding. Any idea on how i can find out what the correct encoding for the data should be?My first guess would be that the console is using an encoding that's not compatible with your program's output. On my Windows machine for example, text that I write to the console is encoded as cp1252 by default, but the console tries to decode it as cp437. I suggest you forget about the console; just write the text to a file in an encoding of your choice, then read the file with a good text editor (in other words, something other than Windows Notepad).
    I'm a bit confused about character encodings. If I create a byte array and populate it with the value of the blob field in the database, will it preserve the data? Does is change the data in anyway? Does a byte array use any character encodings? If you read it as bytes and write it as bytes, nothing should change. Encodings only come into play when you convert the bytes to a string.
    What I suppose I'm asking is does converting from one encoding to another encoding result in any data loss?If both encodings support all of the characters in your text, no data will be lost. But in the example above, if I try to write any characters that aren't in the seven-bit ASCII range, those characters will be decoded incorrectly or replaced with a default character (which usually gets rendered as a question mark).
    By the way, if you haven't read [Spolsky's Unicode Primer|http://www.joelonsoftware.com/articles/Unicode.html] yet, I recommend you do so.

  • "An incorrect PPP option has been set" issue

    I have a USB DSL modem which connects me via my ISP to the net.
    I recently had to re-install my OS on my Mac Mini to 10.4.x and I then upgraded the OS to 10.4.11. I have been trying and frustratingly failing to connect to the net. Every time I try I keep getting the "incorrect PPP option has been set" message. I never used to have any issues connecting before the re-install but now this.
    I have checked, and double checked, the username and password in my network/internet connect settings but keep getting the same message. I also have an iBook G4 and that connects to the net no problem with the same information and that uses 10.3.9. I have checked the settings and all PPP options are the same.
    The one thing that baffles me is that when I enter my password in Network and click Apply Now I get 24 bullets rather than 8 that my password has. The iBook shows 8 bullets. But I am lead to believe this is an Apple security thing that shows that many bullets (?).
    I've tried uninstalling & re-installing the USB software, I've also tried deleting some preferences and all I know.
    Any Mac gurus out there help?

    Morning MPD,
    [This page|http://www.bulldogbroadband.com/residential/products/broadband/equipment.a sp#freewireless2] on Bulldog's website mentions a couple of ethernet based devices (the last one is also wireless, if you don't have wireless cards in your machines then that might be superfluous to needs).
    The cheaper of the 2 is only £1 more than the USB modem you have. Try persuading Bulldog to see if you can swap your existing modem for that one.
    02 Broadband provide that wireless model (I'm with O2 at present :)) and it seems to work fine wirelessly with Macs. Previously I've had good experience with Netgear routers, but everyone has their favourites. Linksys and D-Link are often also recommended.
    Good luck with the reinstallation, I hope that solves this strange problem for you.

  • Elements 12 version set issue in Organizer

    The inclusion of edited versions in the Elements 12 Organizer inexplicably stopped working with in the last 3 weeks (I've had the software since June 2014). If I navigate to the edited photo in Windows Explorer, it is there but I cannot see it in the Organizer media window or folder view. It's as if it is invisible to the Elements 12 program.  I have tried importing into the Organizer but it tells me the file all ready exist. To which I say, duh? I know that. I have not downloaded any new software, only standard updates, and to my knowledge, nothing has changed on my PC. Any suggestions as to what the issue is?

    Thank you for the reply, MichelBParis.
    I have done as suggested. Adobe Application Manager says my "applications are all up-to-date as of 1 minute ago."
    Below is a copy of system info.
    Elements Organizer 12.0.0.0
    Core Version: 12.1 (20140303.12.1.49334)
    Language Version: 12.0 (20130903.r.43239)
    Important Drivers / Plug-ins / Libraries:
    Microsoft DirectX Version: 9.0
    Apple QuickTime Version: Not installed
    Adobe Reader Version: Not installed
    Adobe Acrobat Version: Not installed
    Are there any other suggestions as to what could cause version set feature to stop working properly?

Maybe you are looking for