Setting Language in Lightroom 2.5 to english not possible

Hi,
Just downloaded Lightroom 2.5 on my Mac (OS 10.6) and found out, that I cannot change the language to english like in the previous versions of Lightroom. It automatically switched to German (language of my OS).
There is no possibility to set the language with Cmd + I for that application.
Can anybody help?
Thanks...

I had a similar problem. I got Dutch Lightroom menus were I expected English. I have an English Windows Vista and I usually prefer English menus. I have found a solution for the problem:
- Uninstall Lightroom
- Go to the Control Panel of Windows and select "Regional and Language Options"
- Set Location to "United States"
- Set "Current format" to "English (United States)"
- Reinstall Lightroom
- Go back to Control Panel and reset the options to your original values

Similar Messages

Lightroom 5.7 file import not possible.

After upgrading to Lightroom 5.7 file import is no longer possible, neither jpg nor raw, neither files from panasonic, nikon or fuji. Error: "files cannot be imported, because they cannot be read". Same error, no matter of using the card-slot or trying to import from hard-disk. So the card-slot is ok, because I can use it for every other operation. Im running a macbookpro with OS X 10.8.5. With LR 5.6 last week everything works very well. What the hell is it?
Best regards
Rabenschleuder

Thanks a lot! That´s it!
It took me a while to understand what you had meant and to find out, where and how to change the default setting. I did not change the preset intentionally before and I´m quite sure that LR 5.7 did not do so. There is a faint suspicion that it was done by an OS X update. Perfectly horrible!
Thankful regards
Rabenschleuder

I have a proleme , i have bought lightroom but the develpment is not possible for me?

Sorry i'm french, but i have PC, and after the test, i'm paid and now i dont have developement in lightroom?
What is the problem?
thank

open lightroom>click help>click activate>enter your serial number when prompted.

When i set my region to United Arab Emirates, the language changes to arabic instead of english. help!

When i set my region to United Arab Emirates, the language changes to arabic instead of english. help!

I also have the same issue. Even if the language is set to English, the calendar and time (in the top middle part of the screen) are in arabic.

I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Proofing language for new mails is always "English UK" though default is German

I have Office 2013 Professional Plus installed, English version with German language pack. As "Editing Languages" I have configured German and English, with German the default one.
Still, when I create a new e-mail and start to type, all the German words are highlighted because the proofing language is set to "English". Even when I create a new, empty e-mail and go directly to "Review", "Proofing Language",
it is set to "English (UK)".
Other users (using Office 2010) are reporting the same issue. How can this be changed?

Is this only occurs to Outlook (both 2010 and 2013) ? How about Word?
Check if the users are using custom Stationery, if so, remove the custom Stationery and check if the behaivor still persists.
Normally, we can find the custom Stationery under the following location:
C:\Users\%username%\AppData\Roaming\Microsoft\Stationery
Max Meng
TechNet Community Support

Hows you change the language face. I cannot get english on printer 8620

I accidently pressed the wrong screen during setup.

Hi,
Please try:
Touch settings icon,
Touch Preferences (second row)
Touch Set Languages (second row again)
Now you can see English, touch to it (again, second row)
Regards.
Note: the first row is for Menu names
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do you change the language on HP Photosmart 5512 to english

Can someone please tell me how to change the language on my HP Photosmart 5512? It's currently set to french I think and need English. Can someone help me get to English.

The following document will show the exact steps to change the language. If you were able to make it through the wireless steps to the main home screen you should be able to do this. Luckily french is similar enough to english that you can make out most of the words, and the document will also tell you how many lines down each option is.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02900254&tmp_task=solveCategory&cc=us&dlc=en&lc...
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Set language without language portlet

Hello,
I want to force the language to dutch for all of our users, but don't want them to choose this language on the language portlet or to change the language settings in their browsers.
Jerry Silver suggested in Setting language for a group the use of patch 2948019.
This patch installs wwctx_api.set_nls_language
In portal 9.0.4 WWCTX_API.SET_NLS_LANGUAGE is available, but it says:
Note:</b> This API can only be used for portal sessions that
* have been created via SQL*Plus. It is not intended to be used in browser
* sessions for setting the NLS language and territory.
* The Set Language portlet should be used in that case.
Does someone knows a way to force the language to be different from US-English?
Thanks,
Ton

Hi Ton,
this seems to do the trick on our portal (9026):
<ORACLE>
begin
IF upper(portal.wwctx_api.get_http_language) <> 'NL-NL'
THEN
orasso.wwctx_app_language.set_language(
p_http_language => 'nl-nl',
p_nls_language => 'nl',
p_nls_territory => 'THE NETHERLANDS',
p_requested_url => 'http://hostname:7778/pls/portal/PORTAL.wwctx_app_language.set_language?p_http_language=nl-nl&p_nls_language=nl&p_nls_territory=THE NETHERLANDS&p_requested_url=http://hostname:7778/pls/portal/portal.home'
END IF;
exception
when others then htp.p(SQLCODE||':'||SQLERRM);
end;
</ORACLE>

Error setting language

I want to translate UI elements of a view in WD Component. When i open the automatically created <View>.wdview.xlf i do get an error "Error setting language". The same happens when i do copy the file to e.g. <View>.wdview_en.xlf. on the controller or the messages does not result in the error.. Its just the view.
Thanks,

Ivo,
I got the same problem today. I had a character in French and Japaneese translation and a bullet symbol in English which Java fails to convert to u- sequences. As soon as I replaced them, the problem went away.
Thanks,
Leonid

HT2371 everytime my apps need to be install .. it keep going to a different language when i keep it in english for everything .. and i dont understand why it have a different language when my default is english.. it only happen when the app want me to acc

for ex:
i go into family feud and when i sign into facebook it have a different language.. and my default is english .
it does that to every app i have.. and sometimes my browser is a diff language..knowing my ipod is english

united state of america. new york city and app store the one that came with the ipod touch

I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes.

I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes. I'm not sure of what to do. It's quite frustrating, and all I need is advice, and help. I would much appreciate it. Thank-you.

In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

Go to the bottom of the page, click the flag, then select your country.

Remove language from 'set language' portlet

Hello
We installed 4 languages with our portal. In one page group I did the translation for 3 of the 4 languages.
Now, if I add the 'set language' portlet to one of the portal pages of that page group, all the 4 languages (not only the 3 of the translations!) were shown.
How can I get the 'set language' portlet only to show the 3 translated languages?
Thanks,
Chrigel

Hi,
you should use the ConfigTool to edit the UME property ume.admin.wd.locales as described here
[http://help.sap.com/saphelp_nw70/helpdata/EN/45/fff338e19134dde10000000a1553f7/frameset.htm]
Remember to restart the Java AS afterwards.
Regards, Ane

HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

Setting Language in Lightroom 2.5 to english not possible

Similar Messages

Maybe you are looking for