Setting levels with insert effects
My understanding is that when tracking in Logic Pro, you should aim for average levels of about -12 dBFS, with peaks around -6 dBFS. When I'm recording an electric guitar track via DI with no insert effects, this isn't hard to do: with the input gain turned all the way down, my Scarlett 18i20 gives me a nice level on my Les Paul at just about that.
But when I'm performing, I need to hear what the guitar is going to sound like through an amp, so I place an insert AmpliTube AU patch on the track (along with EQ, noise gate, etc.). But now my nice -12 dBFS average level is more like 0 dBFS.
But does this matter? The audio is captured with plenty of headroom. I can bring the level down in the mix with the fader. So I don't really care if, with the insert effects, the level shows as 6 or 10 dB higher than the pre-effects level, right? So long as I'm not clipping the output, it shouldn't matter, correct?
Correct.
Similar Messages
-
Recording with insert effects?
Am I missing something here? I'm recording guitar into Soundtrack Pro through
a Digi OO2 rack and core Audio. I have Amplitube instantiated on the track. Once the track is recorded, the audio is processed through the plug in. I don't understand why I can't hear the effect while I'm playing/recording the guitar. If the application is purely for post production, I guess I can understand the ommission, but most people like to hear effects on voiceovers, don't they?
If anybody can suggest a workaround, I'd be grateful.That's the way the app works now. I'd suggest sending feedback to apple.
-
Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.
If you are going to use Mac OS X and its associated applications, and a BootCamp partition with Windows 8, and MS Office and all of the work created there, you will more than likely run out of space on a 128 GB SSD pretty quickly...especially if you put any music, photos or videos on it. Those things take a lot of space so you will have to be very, very careful about what you want to put on a 128 GB storage space. You would be better off going for 512 GB with what you plan on doing with it.
-
i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?
256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture -
To Creative Labs: Please design a soundcard with (IFX)Insert Effects and Flash Memory ch
To Creative Labs,
Please in the future?design a soundcard that i can load a lot of (IFX)Insert effects like Reverb, Chorus, Delay, Flanger, Resonance, Equalizer but for every Sound or Soundfont I select in the Contron Panel and also?to memorize these effect settings and?at the end the (MFX)Master Effects,?Compressor and Master Equalizer?effects, like?in KORG Triton synthesizers.
Also?in that soundcard i want flash memory chips that i can load?Soundfonts and Samples?and after PC restart or Shut Down the sounds will stay in memory of the soundcard and remembered perfectly with the effects settings after Log on back to Windows.
That capabilities will be so special for musicians?and the sound will be so professional.
Thank you,
Thodoris, Greece.
Message Edited by Thodoris on 2-05-2008 04:25 PMI have this problem only when using mic in?ventrilo. If you want to get rid of this problem you need to disable sound enchantements? in sound settings and then its fine, however you lose CMSS-3D with it. But its funny tho, if you disable CMSS-3D in Creative Control Panel you still get this issue, it only works if sound enchantements are disabled in windows sound settings.
-
is it possible to control insert effects with MIDI? I'm trying to use robotronic vocoder plugin and it really should let me control the keys on it somehow, but I find no way other than clicking on the keys wich is nonsense...please help thanks.
Eric44,
The reverb and chorus send levels CC9 and CC93 are parameters programmed into the actual soundfont preset. This means that if the parameter isn't set in the preset then you won't be able to hear the effect. It seems that many of the X-Fi synths may have their global reverb and chorus levels set to a low value.
We can change this by editing the midi synths with Vienna Soundfont Studio by increasing the value of reverb and/or chorus in the Preset Zone or play with the levels in the instrument zone, where he can set a different level of FX for each instrument in a preset.
Open Vienna</LI>
Load the SFBank you want to use (X-Fi synth banks located in Windows/System32)</LI>
Expand the bank, click on Preset Zone of the sound</LI>
Click on the reverb below and adjust the levels.</LI>
Save the bank and reload it in Sonar/Nuendo</LI>
You will need to do this for all of the sounds you want to have effects on. You will also want to make sure that EAX is on in the ACM mixer.
Jeremy
(thanks to Norman for the extra info)
Message Edited by Jeremy-CL on 09-6-2005 2:20 AM -
Need help with inserting rows in ResultSet and JTable
hello Guru!
i have inserted a row in my result set and i want that my table shows this row promptly after i have inserted it in my result set...
but when i use following code for my resultset:
rs.moveToInsertRow();
rs.updateInt(1,nr);
rs.updateString(2, name);
rs.insertRow();
Record are inserted in resultset and database but not shown in my JTable??
Anyone a Clue to without reexecuting the query how can i display inserted row in JTable
http://download-west.oracle.com/docs/cd/A87860_01/doc/java.817/a83724/resltse7.h
I have refrered the following links but still clue less help Guruuuuuuu
i m really in trobble??????i am just near by the Solution using the Database Metadata
by couldn't get the ideaaaa
==================================================
http://download-west.oracle.com/docs/cd/A87860_01/doc/java.817/a83724/resltse7.htm
Seeing Database Changes Made Internally and Externally
This section discusses the ability of a result set to see the following:
its own changes (DELETE, UPDATE, or INSERT operations within the result set), referred to as internal changes
changes made from elsewhere (either from your own transaction outside the result set, or from other committed transactions), referred to as external changes
Near the end of the section is a summary table.
Note:
External changes are referred to as "other's changes" in the Sun Microsystems JDBC 2.0 specification.
Seeing Internal Changes
The ability of an updatable result set to see its own changes depends on both the result set type and the kind of change (UPDATE, DELETE, or INSERT). This is discussed at various points throughout the "Updating Result Sets" section beginning on , and is summarized as follows:
Internal DELETE operations are visible for scrollable result sets (scroll-sensitive or scroll-insensitive), but are not visible for forward-only result sets.
After you delete a row in a scrollable result set, the preceding row becomes the new current row, and subsequent row numbers are updated accordingly.
Internal UPDATE operations are always visible, regardless of the result set type (forward-only, scroll-sensitive, or scroll-insensitive).
Internal INSERT operations are never visible, regardless of the result set type (neither forward-only, scroll-sensitive, nor scroll-insensitive).
An internal change being "visible" essentially means that a subsequent getXXX() call will see the data changed by a preceding updateXXX() call on the same data item.
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean ownDeletesAreVisible(int) throws SQLException
boolean ownUpdatesAreVisible(int) throws SQLException
boolean ownInsertsAreVisible(int) throws SQLException
Note:
When you make an internal change that causes a trigger to execute, the trigger changes are effectively external changes. However, if the trigger affects data in the row you are updating, you will see those changes for any scrollable/updatable result set, because an implicit row refetch occurs after the update.
Seeing External Changes
Only a scroll-sensitive result set can see external changes to the underlying database, and it can only see the changes from external UPDATE operations. Changes from external DELETE or INSERT operations are never visible.
Note:
Any discussion of seeing changes from outside the enclosing transaction presumes the transaction itself has an isolation level setting that allows the changes to be visible.
For implementation details of scroll-sensitive result sets, including exactly how and how soon external updates become visible, see "Oracle Implementation of Scroll-Sensitive Result Sets".
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean othersDeletesAreVisible(int) throws SQLException
boolean othersUpdatesAreVisible(int) throws SQLException
boolean othersInsertsAreVisible(int) throws SQLException
Note:
Explicit use of the refreshRow() method, described in "Refetching Rows", is distinct from this discussion of visibility. For example, even though external updates are "invisible" to a scroll-insensitive result set, you can explicitly refetch rows in a scroll-insensitive/updatable result set and retrieve external changes that have been made. "Visibility" refers only to the fact that the scroll-insensitive/updatable result set would not see such changes automatically and implicitly.
Visibility versus Detection of External Changes
Regarding changes made to the underlying database by external sources, there are two similar but distinct concepts with respect to visibility of the changes from your local result set:
visibility of changes
detection of changes
A change being "visible" means that when you look at a row in the result set, you can see new data values from changes made by external sources to the corresponding row in the database.
A change being "detected", however, means that the result set is aware that this is a new value since the result set was first populated.
With Oracle8i release 8.1.6 and higher, even when an Oracle result set sees new data (as with an external UPDATE in a scroll-sensitive result set), it has no awareness that this data has changed since the result set was populated. Such changes are not "detected".
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean deletesAreDetected(int) throws SQLException
boolean updatesAreDetected(int) throws SQLException
boolean insertsAreDetected(int) throws SQLException
It follows, then, that result set methods specified by JDBC 2.0 to detect changes--rowDeleted(), rowUpdated(), and rowInserted()--will always return false with the 8.1.6 Oracle JDBC drivers. There is no use in calling them.
Summary of Visibility of Internal and External Changes
Table 12-1 summarizes the discussion in the preceding sections regarding whether a result set object in the Oracle JDBC implementation can see changes made internally through the result set itself, and changes made externally to the underlying database from elsewhere in your transaction or from other committed transactions.
Table 12-1 Visibility of Internal and External Changes for Oracle JDBC
Result Set Type Can See Internal DELETE? Can See Internal UPDATE? Can See Internal INSERT? Can See External DELETE? Can See External UPDATE? Can See External INSERT?
forward-only
no
yes
no
no
no
no
scroll-sensitive
yes
yes
no
no
yes
no
scroll-insensitive
yes
yes
no
no
no
no
For implementation details of scroll-sensitive result sets, including exactly how and how soon external updates become visible, see "Oracle Implementation of Scroll-Sensitive Result Sets".
Notes:
Remember that explicit use of the refreshRow() method, described in "Refetching Rows", is distinct from the concept of "visibility" of external changes. This is discussed in "Seeing External Changes".
Remember that even when external changes are "visible", as with UPDATE operations underlying a scroll-sensitive result set, they are not "detected". The result set rowDeleted(), rowUpdated(), and rowInserted() methods always return false. This is further discussed in "Visibility versus Detection of External Changes".
Oracle Implementation of Scroll-Sensitive Result Sets
The Oracle implementation of scroll-sensitive result sets involves the concept of a window, with a window size that is based on the fetch size. The window size affects how often rows are updated in the result set.
Once you establish a current row by moving to a specified row (as described in "Positioning in a Scrollable Result Set"), the window consists of the N rows in the result set starting with that row, where N is the fetch size being used by the result set (see "Fetch Size"). Note that there is no current row, and therefore no window, when a result set is first created. The default position is before the first row, which is not a valid current row.
As you move from row to row, the window remains unchanged as long as the current row stays within that window. However, once you move to a new current row outside the window, you redefine the window to be the N rows starting with the new current row.
Whenever the window is redefined, the N rows in the database corresponding to the rows in the new window are automatically refetched through an implicit call to the refreshRow() method (described in "Refetching Rows"), thereby updating the data throughout the new window.
So external updates are not instantaneously visible in a scroll-sensitive result set; they are only visible after the automatic refetches just described.
For a sample application that demonstrates the functionality of a scroll-sensitive result set, see "Scroll-Sensitive Result Set--ResultSet5.java".
Note:
Because this kind of refetching is not a highly efficient or optimized methodology, there are significant performance concerns. Consider carefully before using scroll-sensitive result sets as currently implemented. There is also a significant tradeoff between sensitivity and performance. The most sensitive result set is one with a fetch size of 1, which would result in the new current row being refetched every time you move between rows. However, this would have a significant impact on the performance of your application.
how can i implement this using
JDBC 2.0 DatabaseMetaData objects include the following methods to verify this. Each takes a result set type as input (ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_SENSITIVE, or ResultSet.TYPE_SCROLL_INSENSITIVE).
boolean deletesAreDetected(int) throws SQLException
boolean updatesAreDetected(int) throws SQLException
boolean insertsAreDetected(int) throws SQLException -
Using Captivate 5.5, I've inserted an image on the slide that is wider than the slide itself. The right edge of the image lines up with the right edge of the slide. I want to add an effect to the image so that when the slide appears, the image appears immediately. Then the image moves from left to right until the left edge of the image lines up with the left edge of the slide. None of the white slide background should be showing at any time.
I've tried various settings with the effects, but each time, some of the white slide background shows at the beginning and/or end of the effect, so that the image is not covering the whole slide.
Can anyone help me?Hi Jay,
Just tried it out and cannot get your issue
I inserted an image, set it to No transition in the Properties panel (did you do that?), aligned it to the right of the stage and added the effect LeftToRight. Then I changed the motion path so that at the end the image was aligned with the left border of the stage, extended the effect till the end of the slide. This seemed to work as expected, I never did see the background when previewing in Browser or from this slide. I did not publish.
Lilybiri
PS sometimes I set the effect not to start when the image appears but 0,1sec later. -
Moving Patch Channel Strips to Set Level
I have a patch setup I would like to move to a Set level, complete with it's layout, channel strips, plug-ins, and instruments. Is this possible in MainStage 1? How? And, iƒ not, is it possible in MainStage 2?
Thanks.....The simplest way is to do it by channel strip, for each channel strip, position your mouse over the Setting block, right click, choose "Copy Channel Strip Setting", go to your Set (insert a new channel strip if you have to) then right-click over the Setting block again and choose "Paste Channel Strip Setting".
-
Strange new problem with external effects and latency compensation
i'm currently facing a new , very strange problem with latency compensation for external effect devices. it alway worked fine for me but suddenly there are strange things going on. i'm suddenly running into problems when using sends which feed auxes going to external effect devices.
latency compensation is set to ALL !!!
easy setup :
- open an empty project and create 2 audioinstrument tracks. on the first one load the exs with a drumkit and record f.e. a bassdrum pattern. leave the 2. instrument empty.
- now on the first audio instrument create a send to bus 1 -> aux 1 and insert the i/o plug-in in the aux and route it to your external effect device. chose a temposynced delay.
- press play = everything is fine when audioinstrument 1 is highlighted in the arrange.
- press stop, click on the track with the 2. audioinstrument and press play = totaly weird timing problems. delay is only in sync when track 1 is highlighted.
- create a send in the 2. audioinstrument and route it to bus 1 -> aux 1 too = still the same problem
now insert ANY softwareinstrument in audioobject 2 and suddenly the timing for the delay is right.
go ahead and create a 3. audioinstrument track but leave it empty first. chose it in the arrange = again weird timing problems with the external delay.
insert any software instrument on audioinstrument 3 = still the same problem
now create the send to bus 1 -> aux 1 in audioinstrument 3 and guess what, timing is right.
*** is going on here ? can anyone reproduce that ?
it works fine when using sends which feed auxes with software effects inserted.
funny thing is, when i go to the environment and change aux object one to bus object 1 and insert the same i/o in it it works !!!
very very strange, please tell me i'm not crasy and this is a bug !!!
as said, latency compensation is set to all.
i'm using the mac pro 3.2 8-core running os 10.5.4, logic 8.0.2 and a motu pci-e audio system.
Message was edited by: Olaf DieckmannWelcome to the Discussions.
If you need it formatted FAT32, reformat it on your Mac. Use MS-DOS (FAT32) as the file system. If you don't need it for both PC and Mac, format it HFS+ and you'll be able to use the Retrospect Express software that came with it on your Mac.
John -
Problem with keyframe effect - at start and end (crop and scale)
I'm having this odd problem with keyframe effects.
Setup:
I have a gif image that I have on video 1 for say 2 minutes.
I have my real video on video 2. It is a person talking.
First I start with my video full size on top of video 1.
Though the motion and cropping keyframe management I slowly reduce the scale and crop my video image so that it is reduced to the lower left bottom of the screen, on top of the gif, which is now revealed.
My problem is at the start and end of the transition from full video to small box on lower left on top of my gif I often get 1-2 frames where the video goes blank and/or I get a bunch of random red bars on black background appearing on the video - Or I get the gif from video 1 without the video 2 at all (it disappears).
I've tried moving my start of end of the transition to skip the bad spots - but these new transition starts or ends not get their own bad spots in the same way. Its only a couple of frames but it's really unacceptable for the finished video.
Note, when I say transition here I don't mean real transition events, but rather the start of effects that are managed with keyframes. My move from start to end of the effect runs for about 4-6 seconds.
Any ideas?Bill,
Here is more detail and screen captures.
Concept:
I have 3 minutes of video. It contains a person making a speech. During parts of the speech I want to reveal a graphic image that will be discussed. The speech will begin with the speaker full screen. Half way in, the speaker will shrink down to 45% in the lower left corner of the screen. While the animation occurs (the shrink, move and cropping) it will reveal the graphic below. The graphic will take up the full screen with the speaker at 45%.
Technique:
I put the video in Video 2 and the graphic, a GIF image in Video 1. The scene begins with the speaker talking at full screen. After a minute, I animate the move of the speaker using Motion: Scale and Position and Effect: Crop changing Top, Bottom, Left and Right sides. The animation occurs over approximately 8 seconds.
I am manually adding keyframes at the start and end of the animation. I set the ending state of the video image in the end keyframes. The interpolation between these start and end keyframes should be managing the animation.
Problem:
At the beginning and end of the animation – usually 1-3 frames from the start and 1-3 frames from the end, where the change has barely begun or almost ended, I get these problems. On some frames, the video (in Video 2) completely disappears only showing the Video 1 GIF image below. On other frames, the video image turns black with horizontal red bands half way across.
Troublshooting:
I’ve tried deleting all start and end keyframes and moving the start and end earlier or later to see if I can fix this, but the problem continues to show up in these new locations.
I have added a few screen shots.
1:32:15 is the start of the animation change and 1:40:22 is the end of increasing from the mini video speaker to full size (on top of the GIF).
At 1:40:16 the video image completely disappears only showing the GIF below.
At 1:40:17 its back and slowly increases in size through the interpolation until it is full size at 1:40:22.
Let me know if you need anything else.
Thanks!
Evan -
Currency translation differences with an effect on earnings
Product Version: SAP R/3 46.C
Componente: EC-CS-CSF-E Currency Translation
In currency translation program of ECCS (tx CX40) the prior year portion of translation differences that affects earnings is posted in current period in the earnings retain item (ER) which according to SAP documentation "Currency translation differences with subsequent consolidations" is correct, however when we run the currency translation on subsequents periods this amount is posted again generating a multiplying of differences on each period.
In accordance with section u201CBu201D of SAP note 553586, the carryforward item (retain earnings) was assigned to translation key 5, to avoid multiplications of this difference in every execution of currency translation for current period. This correction was applied successfully, however the problem is now generated when we run the currency translation in every subsequent period.
SAP notes 582815 and 553586 was applied succesfully.
We also verified SAP note 1045402 changing the translation key 5 to 1, for balance carryforward item (retained earnings) this avoids the difference effect on subsequents periods, but generates a translation differential effect undesired on this item, since this is a historical item that not must be altered by currency translation.
Additionally we read SAP note 509509 and we think that this issue corresponds whit symptom 2 of that note.
Step by Step:
Transaction: CX40
Setting of Translation SET in translation method:
1.- MARS-GAP-Monetary:
1.1.- Items of balance sheet
1.2.- Translation Key 1
1.3.- Item for differences: income statement item with an effect on earnings
2.- MARS-GAP-NonMonetary
2.1.- Items of balance sheet
2.2.- Translation Key 6
2.3.- Item for differences: income statement item with an effect on earnings
3.-MARS-MOR-Monetary
3.1.- Items of P&L
3.2.- Translation Key 5
3.3.- Item for differences: income statement item without an effect on earnings
4.-MARS-MOR-NonMonetary
4.1.- Items of P&L
4.2.- Translation Key 6
4.3.- Item for differences: income statement item without an effect on earnings
5.- MARS-HIST
5.1.- Items of balance sheet
5.2.- Translation Key 6
5.3.- Item for differences: Balance sheet item without an effect on earnings
6.- ANI-BS-FX
6.1.- Items of differences SET MARS-HIST and Carryforward Item for special items in transaction CXD3, the same item for the balance carryforward (retained earnings)
6.2.- Translation Key 5
6.3.- Item for differences: Balance sheet item without an effect on earnings (the same item for the SET MARS-HIST)
7.- ANI-BS
7.1.- The special balance sheet item in Transaction CXD3
7.2.- Translation Key 5
7.3.- Item for differences, the same item
8.- ANI-IS
8.1.- The special income statement item in Transaction CXD3
8.2.- Translation Key 5
8.3.- Item for differences, The same item
Note:
1 .- According to the point A of the note 553586 was included the FS Item 484051011(difference item for SET MARS-HIST) in the conversion SET ANI-BS-FX
2 .- According to Section B of the note 553586 was included the account for carried forward 481000001 the special accounts set up in the transaction CXD3 in the conversion SET ANI-BS-FX
3 .- According to Section C of note 553586 are included special accounts set up in the transaction CXD3 390000 and 251200, in the conversion SET ANI-IS and ANI-BS respectively.
When run the currency translation in the new year 1-2011, the prior year portion of translation differences that affects earnings is posted in current period a credit to earnings retain and debit to account difference in SET for this account. This amount is same on special balance sheet item 251200, in tx CXD3, also found on the statistical FS item.
Then in subsequent periods, 2 - 2011 it posting another credit to earnings retain and debit to account difference in SET for this account, generating a multiplying of differences on each period, even though the difference for this account (ER) in the log of the translation currency is equal to the difference posted to the previous period, show this in transaction CX34 for items of translation (1) for this account until 1-2011.
Edited by: Ana Brito on Jul 25, 2010 8:10 PMHi,
just a information how I did a workaround about this:
The opening (movement type 100) of the balance sheet item "differences of currency translation" is customized with "don't change...".
Every increase to "differences of currency translation" works with e.g. movement type 120 and will be carried forward to 100.
Maybe this is a scenario you can use...
BR -
Report with stored proc running multiple stored procedures with insert statement
Hi,
I wonder if this is possible in SSRS ... I use the 2012 version (Data Tools).
I have a report that triggers a stored procedure. See below.
Within this SP there are 2 insert statements getting data from 2 other SP's.
When I make a dataset referring to the main SP below, SSRS does not show me any fields at all.
Is this because it's a SP with insert statements and nested SP's?
At the end of the SP I make a select so it should see all the fields.
The parameters @month and @costcenter are multivalue params. I use a special function to convert the multivalues, selected in the report, into a string to pass it correctly to the query (comma separated).
USE [TestDB]
GO
/****** Object: StoredProcedure [dbo].[_Pink_SP_StandingsRegisterDataset] Script Date: 15-4-2014 13:31:30 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[_Pink_SP_StandingsRegisterDataset]
@year INT,
@month NVARCHAR(50),
@costcenter NVARCHAR(500),
@GLaccount NVARCHAR(9)
AS
BEGIN
/* Remove existing content*/
DELETE FROM _Pink_TB_StandingsRegister
/* Add records part 1 */
INSERT INTO _Pink_TB_StandingsRegister
EXEC _Pink_SP_StandingsRegister @year, @month, @costcenter, @GLaccount
/* Add records part 2 */
INSERT INTO _Pink_TB_StandingsRegister
Type,
Row,
Year,
Month,
YearDatetable,
MonthDatetable
EXEC _Pink_SP_StandingsRegisterDatetable @year
/* Select all records */
SELECT *
FROM _Pink_TB_StandingsRegister
END
GOHi bijntjede2e,
After testing a similar scenario in my own environment, it works well in Reporting Services. In my test, the stored procedure returns all the fields from _Pink_TB_StandingsRegister table in the dataset. Then I select some values from year, month, costcenter
and Glaccount parameters, it inserts some values in the _Pink_TB_StandingsRegister table. So we can use this stored procedure as the dataset in the report.
In order to solve the problem more efficiently, I need to clarify some information.
Are you pass multiple values parameter to one stored procedure correctly? We can refer to the following thread:
http://social.technet.microsoft.com/Forums/en-US/dbdfa101-cccc-4e9f-aa50-566dc5ebcc27/ssrs-2008-r2-report-dataset-call-a-stored-procedure?forum=sqlrep
What results are you get when executing the stored procedure in SQL Server Management Studio? Is it works well? We should double those stored procedures.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR -
Windows 8 Mail App - Not setting up with Office 365 Account
Hi - I'm trying to get an Office 365 Exchange account set-up with the Windows 8 Mail app. It's giving me an error stating the following:
To sync this account, you first need to: Make your Windows user account an administrator.
I do not want to give admin privileges to the individual user account on Windows (as the error is stating that it wants me to give admin privileges to the local Windows 8 account - not on Office 365) and I cannot find any restriction set-up in the admin
console/settings on Office 365 (or in Widows 8) that would require this privilege.
This same account (on Office 365) can connect fine via Outlook 2010 and a Windows Phone 7 mail app.
How can I solve this?..Derek,
Can you please share the UAC setting or GPO settings you used to fix this in Windows 8? I've gone to the lowest available setting in the UI (there appears to be a lower limit that a NON-admin user can manually set UAC to and to get any other levels,
you need to use GPO) and still no luck.
Thx,
DML
DLovitt
Maybe you are looking for
-
I was calling it and it was ringing so i dont know whas going on,it still getting messages but i cant see it on the screen because its blank.what to do?
-
Thunderbolt to Gigabit Ethernet Adaptor and iPad 4
Is there a way to connect the Thunderbolt to Gigabit Ethernet Adaptor to an iPad 4?
-
How much to replace a cracked screen
How much to replace a cracked screen?
-
I was trying to sync my data from my bPC to my iphone. Something happened and many of my program icons including Explorer and others all turned to iTune lnks. How do I reverse this?
-
A mapped elements relationship with other elements cannot be preserved
Hi, I am trying to create an XML file from an XSD using excel macros and data from excel worksheet. The mapping takes place fine. However, when I try to save the mapped items into an XML file using SaveAsXML function, it gives me the following reason