Setting mnemonic on second instance of character

Hi,
I have a string "Test is now" ... i want to set the Mnemonic to 's' ...but I want it to be on the s in the word "is".
.setMnemonic('s') put's it on the 's' in Test....and .setMnemonic(7) does not show a Mnemonic at all.
any ideas?
Thanks
Craig

FOr the folowing code, I want the second (i.e. capital) 'T' to be underlined.
mSizeLbl = "Default Thumbnail";
String sDefaultThumbnailMnemonic = "T";
mSizeLbl.setDisplayedMnemonic(sDefaultThumbnailMnemonic);
mSizeLbl.setDisplayedMnemonicIndex(8);
For the above code....though it's functionally working fine........and also the right character is underlined.
What happens if my localisation support changes the whole string to french, and also the mnemonic in it changes..........then how can i specify that i want (maybe) the first character of the word "Thumbnail in french" to be underlined!!!!!????
TO state it again....how will i know what is 'Thumbnail' called in french and hence at what index does the 1st character of "Thumbnail in french" begin for me to set it the the displayedMnemonicIndex....... is there a solution to this?

Similar Messages

BIP 11g Enterprise - Need second instance of bip server

we are short of boxes and instead of deploying a full vm just for a second instance, I was thinking of setting up a second instance of bip under the web logic. However, when I try to clone the existing bip managed server, the system is adding it a as a node in the same cluster. That is not good because I am not doing load balancing.
I need a complete second instance with its own ports but managed under same web logic server. Any guidance would be appreciated?
D

Hi Joe
I can't say I've tried Robin's technique to run two presentation servers but from my basic understanding of it, both versions will share the same cache as defined in a single nqsconfig.ini file. Maybe these 2 are conflicting somehow?
I see that a separate instanceconfig.xml is used for each presentation server. I know there are a bunch of advanced, largely undocumented, cache properties you can set in there. I can send you a document listing the various properties if you want to play with it - contact me via my website.
Paul
http://total-bi.com

How do I create a second instance of oc4j in a standalone enviroment

I am using OC4J standalone to deploy a sparql endpoint using jena, joseki, and the oracle jena adaptor. OC4J is running on the same server as my DEV and QAR databases. The current instance of OC4J is using a data source called "OracleSemDS" to connect to my DEV database. We are now ready to migrate the endpoint to QAR. As I was setting up the QAR endpoint, I discovered the the jena/joseki tools are hard-coded to use the "OracleSemDS" data source. Therefore, I cannot have 2 endpoints running in the same OC4J instance where one points to DEV and the other points to QAR.
Therefore, I need to create a second instance of OC4J that specifies QAR as the "OracleSemDS" data connection. Can someone tell me how to do that?
Thanks,
Phil

jphilb wrote:
I am using OC4J standalone to deploy a sparql endpoint using jena, joseki, and the oracle jena adaptor. OC4J is running on the same server as my DEV and QAR databases. The current instance of OC4J is using a data source called "OracleSemDS" to connect to my DEV database. We are now ready to migrate the endpoint to QAR. As I was setting up the QAR endpoint, I discovered the the jena/joseki tools are hard-coded to use the "OracleSemDS" data source. Therefore, I cannot have 2 endpoints running in the same OC4J instance where one points to DEV and the other points to QAR.
Therefore, I need to create a second instance of OC4J that specifies QAR as the "OracleSemDS" data connection. Can someone tell me how to do that?
Thanks,
Philgday Phil -- Melli Annamalai from the Oracle Server PM team pointed me to your question. I was an OC4J Product Manager before we bought out BEA and I swapped over to WLS -- so I have some information below that hopefully is of assistance to you.
Since you are using OC4J standalone, the simplest way to get a second instance, is to just clone the existing, whole directory structure of your working OC4J instance into another directory, and configure/run it from that directory. To map the OracleSemDS to another target (QAR) you change the data-sources.xml file in the second instance. If you want to run them concurrently on the same server, you'll need to change the ports in the second instance so they have unique values: default-web-site.xml, rmi.xml, internal-settings.xml, jms.xml. These additional ports can be specified on the command line as a Java property string, albeit this is not a documented nor supported feature. See http://buttso.blogspot.com/2007/02/specifying-oc4j-standalone-ports-from.html for more information.
Now as an example, assuming you have your OC4J you want to clone in the dev directory, and now want to create a second instance of OC4J in qar, I'd do this:
cp -rp dev/* qar
cd qar/j2ee/home/config
vi data-sources.xml
(edit any other files if needed to alter ports) ...
cd ..
java -jar oc4j.jar That should work, and should create the second instance using the current configuration (ie dev) as its basis (including deployed apps). Of course, you'll need to manage them independently from here as they really are just two separate OC4J standalone instances.
Now what else you could potentially do is to create a secondary configuration file subset only which only changes the necessary files to support running the second instance. In this case, you'd make a copy of the j2ee/home/config/server.xml, j2ee/home/config/application.xml and j2ee/home/config/data-sources.xml files, renaming them to qar-server.xml, qar-application.xml and qar-data-sources.xml.
Then do the following:
1. In qar-server.xml file, you'd change the global-application application to point at qar-application.xml instead of application.xml:
<global-application name="default" path="qar-application.xml" parent="system" start="true" />
2. Change qar-application.xml so that it used the qar-data-sources.xml file:
<data-sources path="qar-data-sources.xml" />
3. Change qar-data-sources.xml file so it points to the qar database target.
4. Start OC4J, telling it to use qar-server.xml instead of the default server.xml
D:\java\oc4j-10135-prod\j2ee\home>java -jar oc4j.jar -config config/qar-server.xmlI think you could run into some concurrency problems if you try and run the two instances simulataneously, but in general it should be OK I think if you run them separately.
Another solution here is look at how the application specifies/uses datasources. The hard coding of the data-source name into the applicaiton via a direct JNDI lookup works, but restricts the flexibility you as a deployer/administrator has.
If the application used the Java EE resource-ref approach to look up and use the datasource, then the actual JNDI name of the datasource the application uses it totally abstracted from the actual physical name of the datasource that is created on the container -- so you'd have DEVDS and QARDS as physical datasources configured and running on OC4J -- and what happens is that as you deploy the application, you essentially map its lookup and use of OracleSemDS (which would need to change to a java:env/ namespace) to the physical datasource you want it to use (DEVDS or QARDS for example). You can easily alter this post deployment by changing the generated orion-application.xml file to point at the alternate physical datasource. Following that, you can also create separate deployment plans which map the app to the different datasources, then feed this in with the deployment operation so that the correct mapping to either DEVDS or QARDS is done during the deployment process.
I don't know what scope you have to change the application so the above may not be possible -- you'd need to change the lookup code so that it uses the Java EE reference model and change the meta-inf/application.xml to add the corresponding resource-ref entry which declares the logical datasource name that needs to be mapped on deployment.
Another approach here may be to use an application embedded datasource, where you put a data-sources.xml file into the application archive itself (along with an orion-application.xml file which references it) whereupon at deployment time, a datasource specific to the application will be created. In this manner, you'd have say two copies of the same application to deploy (DEV, QAR) which contain different data-sources.xml file. From memory, each application will have its own JNDI namespace so their datasources can co-exist with the same names, with application level data-sources overriding server level ones. Since you'll most likely want to keep the same context-root for the web modules (which has to be unique per server) you'll generally need to run just one of the applications at a time. I'd do this like this: deploy one, stop it, deploy the other, stop it, then start only the one you need to test. In that way, you'll have one copy of the application running (either DEV or QAR) and one datasource definition running within it.
Here's some documentation links to get you going:
Managing Application Lifecycle (start, stop): http://download.oracle.com/docs/cd/E14101_01/doc.1013/e13978/adminclient.htm#BABHJAFE <-- describes admin_client.jar but general principles apply to ascontrol management of application.
Packaging and Testing Applications: http://download.oracle.com/docs/cd/E14101_01/doc.1013/e13979/packag.htm#BHCFBEEC
Application Level DataSources: http://download.oracle.com/docs/cd/E14101_01/doc.1013/e13975/datasrc.htm#CHDIBFHG
Using Deployment Plans: http://download.oracle.com/docs/cd/E14101_01/doc.1013/e13980/deployplan.htm#CHDFEFAE
cheers
-steve-

Create a second instance by DBCA

I have a simple RHEL3 box with 1 G memory, I had used the DBCA to install a database, 10g r2, on it. How can I use the DBCA to create a second instance on the same DB? Someone´s thread said it can, But when I run the dbca, there is no place I can pick to create second instance, all I have is to create another database and next. My oracle was 10g r2 (10.2.0.1) SE1 version downloaded from Oracle. Is a problem with my original download copy or setup of the dbca? Thx.
Chi

Thanks Kuljeet. I think I missed that part of fundamentals. So how about the second schema vs second instance? Some users said that the second instance will need more overhead for oracle structure. and many experienced users said that second schema on the same instance is bad idea. The reason I want is to separate the test part of the database operation to a second environment (not sure it is a good word). So the management of Oracle will be simpler. My 10g r2 is part of BAAN erp application, BAAN uses Oracle as a data/index storage only, Most of the processes is around running SELECT, UPDATE and INSERT sql (developed from BAAN´s 4G script). No procedure, no function, no trigger or any other involved. However, during the set-up of the BAAN, contractor created a test set of database, then repeated the data/index tables to a prod set. So that our BAAN users can test some processes and move that processes to prod.

Second Instance for OWA

Greetings!
Here, users use forms because lots of them have access to more than one mailbox and that mailboxes are not set full access and we don´t have it mapped to do configure the full access yet.
So, we would like to setup a second instance of OWA, bind it a new URL and set this second instance to integrated authentication, taking advantage of SSO.
Is it possible? To create a second site with OWA or a new OWA on the same site in the same server? If yes, some step by step? or article?
Thanks in advance.
Fabio Martins MCDST/MCSA Brasil!!!

Hi Martins,
Based on my knowledge, we cannot create a new OWA VD in the same site.
I find a related blog for your reference to create a second instance of OWA, hope it is helpful:
How to create multiple instances of OWA
http://searchexchange.techtarget.com/tutorial/How-to-create-multiple-instances-of-OWA
Disclaimer:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
that you completely understand the risk before retrieving any suggestions from the above link.
Detailed steps:
1. Assign an additional IP address to your client access server
2. Create a new website
3. Create a new virtual directory
4. New-OWAVirtualDirectory –Name "owa" –Website "Contoso.com"
5. Assign users to specific websites
6. Use segmentation to disable OWA features
Thanks
Mavis Huang
TechNet Community Support

Setting focus to new instance of a field...need help.

Hi there,
I have a flowed form which consists of multiple subforms. I have one subform which is basically one textfield that is set to a min of 1 and a max of 5.
These are to correspond to fields in our system of record that have 5 fields for company long name with a 36 character field limit.
I've got the limits set up just fine and I have added simple script to add a new instance when the user exits the field.
The focus goes to the next field set in the tab order but what I want is the focus set on the new instance of field created but I have not been able to find an example of how to do that.
Any suggestions would be greatly appreciated. Thanks!

Well,
I've been reading and trying various things but cant get anything to work like I want it to.
The sample provided works for 2 iterations but mine has to do this for up to 5 instances. I have not been able to figure out how to get this to work.
Anyone have any additional suggestions?
btw...here is my modified version. ES2 is whay I'm using.
Long_Title.occur.max = "5";
var oSubform = xfa.resolveNode("Long_Title");
var oNewInstance = oSubform.instanceManager.addInstance(1); // I think you probably managed this first part better than here
xfa.form.recalculate(1); // I THINK THIS IS IMPORTANT
var count = (this.Long_Title.nodes.length)
var testIndex = oNewInstance.Account_Long_Title.index;
xfa.host.messageBox("Text Field Index in new Subform: " + count); // TextField1 will conserve index 0 because it is the only textfield in the new Sub1
var NEW_TEXTFIELD = xfa.resolveNode("Long_Title[1].Account_Long_Title[0]"); // However, Sub1 gets index 1 because it is not alone any more
xfa.host.setFocus(NEW_TEXTFIELD); // This actually sets focus on the newly created instance of TextField1 (actually Sub1 instance)

OBIEE 10g: Presentation Cache in Second Instance of Presentation Server

Hi everyone,
I've been having an issue with my presentation cache disappearing every couple of minutes.
I'm working with OBIEE 10.1.3.4, on Oracle Application Server on a Linux RHEL 5.4 32bit. I've spun up a second instance of the presentation service using the commands from RNM1978's blog here (http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/). The reason why I have a second instance of the presentation service is for mobile reporting purposes. We have lots of executives using iPhones and the Oracle Business Intelligence Indicators application. The second instance defaults all charts to be PNGs, it also uses a separate, clean catalog, so that the executives don't get lost in all of the out of the box BI Applications content that is in our main catalog.
Everything is setup and working properly, both presentation services are accessible and use the same RPD but different catalogs. The only thing that isn't working is the presentation service cache. A lot of these reports are QTD or YTD so it takes a few minutes to run some. We were hoping to use iBots to create BI Server cache at the beginning of the day. That seemed to help a bit but it seems to clear after a few minutes.
Additionally, before we went to do demos to end users, we would run all the reports from a demo iPhone. Go to do the demo and within five minutes, the presentation cache would have already cleared. I confirmed the same by looking in the Session Manager of the second presentation service.
Does anyone know why this would be happening? I have cache turned on in the bi server and I also have the following settings in my instanceconfigMobile.XML:
<Cache>
<Query>
<CacheMaxEntries>1000</CacheMaxEntries>
<CacheMaxExpireMinutes>720</CacheMaxExpireMinutes>
<CacheMinExpireMinutes>720</CacheMinExpireMinutes>
<CacheMinUserExpireMinutes>720</CacheMinUserExpireMinutes>
</Query>
</Cache>
Are there other settings I need to investigate?
Is this just additional commands I need to run when launching the additional presentation service? Here's the command I'm using:
. ./common.sh
. ./sa-init.sh
sawserver -c /home/oracle/OracleBIData/web/config/instanceconfigMobile.xml >> /home/oracle/OracleBIData/web/log/sawserverMobile.out.log 2>&1 &
Thanks!
-=Joe

Hi Joe
I can't say I've tried Robin's technique to run two presentation servers but from my basic understanding of it, both versions will share the same cache as defined in a single nqsconfig.ini file. Maybe these 2 are conflicting somehow?
I see that a separate instanceconfig.xml is used for each presentation server. I know there are a bunch of advanced, largely undocumented, cache properties you can set in there. I can send you a document listing the various properties if you want to play with it - contact me via my website.
Paul
http://total-bi.com

Where to add DISPLAY=:0.1 to get second instance of Firefox to open on second screen

I have set things up using Firefox profiles so I can open a second instance of Firefox. I have even put a a launcher icon on the panel. However, I would like to have the second instance open on the second screen. I have found I can use the variable DISPLAY=:0.1 at the command prompt, but I would like to add the variable, or something that has the same effect to a file to make the launch on the second screen automatic.
Can somebody suggest the right code, and where to put it please?

Hi clay1905,
Thank you for posting your question, there are a few old solutions to this however I am not sure if they work in the updated version you are using:
*[http://forum.xbmc.org/showthread.php?tid=50500]
*[http://ubuntuforums.org/showthread.php?t=1594320]
The general theme looks like if you run a bash file from the launch pad to open one application, then sleep, then launch the second instance in the second display this could be done.
*How to run your first bash [http://www.tldp.org/LDP/Bash-Beginners-Guide/html/sect_02_01.html]
*run script from desktop shortcut: [http://askubuntu.com/questions/299052/how-to-execute-sh-script-from-a-desktop-shortcut]
I hope that puts you in the right direction.

Second instance installation SGA question

Hi Everybody,
I have an Oracle 10g Database installed on a Solaris Server and the SGA of the Database is 3.9 GB. The Solaris System has 4 GB RAM.
Now I want to install another instance on the Solaris Server. How is it with the SGA? How much SGA can I give to the new instance and is there a problem when the two SGAs of the Instances have more than the 4 GB of the Solaris system (e.g. 3.9 (first instance) + 3.9 (second instance) ). The plan is that both instances will run at the same time.
Thanks for any answer.
Regards DocX

The first instance was installed by a third person and it seems that it calculates > the memory automatically because Shared, Large Pool and Buffer Cache are
shown as 0 and only the total SGA is shown as 3.9 GB.That means SGA autotuning is turned on, responsible parameter is SGA_TARGET (not SGA_MAX_SIZE). Often SGA_MAX_SIZE is not set, but derived from the sum of all memory structures or - if set - SGA_TARGET.
SGA_TARGET is dynamically modifiable (alter system set ...), while the database is open, but SGA_MAX_SIZE is not.
Because of its swapping/paging facilities the machine can handle more memory than available as physical RAM, but becomes slow. Oracle may show something like 'not enough memory', when you try to start the instance.
so Oracle does not handle the memory automatically like giving each instance only 2 GB physically memory although both have a SGA of 3.9 GBThere is no 'cross-instance' memory maintenance between Oracle instances.
Werner

Swing Program Slow on Some Computers Second Instance Always Fast

I am having a unusual and frustrating problem. I have a java swing application compiled and run with 1.5.06.
On some computers the program runs very slowly and takes a long time to paint to the screen. If however, you run a second instance of the program the second instance runs very fast. If you close the first instance the second instance remains fast.
Running the java console first will also make my program fast.
On other PC's with the identical hardware it runs fine the first time. All the computers involved run windows 2000.
Please help with this weird problem. Thanks.

It seems that you need to fine tune ur JVM based you requirement.
Try setting the max heap size.
Also, You can tyr -XX jvm option. But the decision purely depends on you applications behaviour.
Thanks
Jobinesh

Problem with second instance of access manager

Well, after sorting out things with the first install of access manager, I went on to install a second instance on a different host (it's required for delegated admin..)
Here are the options I used on install:
Access Manager: Administration (1 of 6)
Administrator User ID: amAdmin
Administrator Password [] {"<" goes back, "!" exits}:
Retype Password [] {"<" goes back, "!" exits}:
LDAP User ID: amldapuser
LDAP Password [] {"<" goes back, "!" exits}:
Retype Password [] {"<" goes back, "!" exits}:
Password Encryption Key [gFoe4t8UlUW3wEApngAY3S8bCQFVMlGk] {"<" goes back,
"!" exits}: weW5jtopMLQsODiBZDp+hlEp1/CtbiXX
Install type (Realm/Legacy) Mode [Legacy] {"<" goes back, "!" exits}:
Access Manager: Web Container (2 of 6)
1. Sun Java System Application Server
2. Sun Java System Web Server
Select the container to deploy the component and hit enter key [2] {"<" goes
back, "!" exits}
Access Manager: Sun Java System Web Server (3 of 6)
Host Name [zone2.corenode.com] {"<" goes back, "!" exits}:
Web Server Instance Directory [opt/SUNWwbsvr/https-zone2.corenode.com] {"<"
goes back, "!" exits}:
Web Server Port [80] {"<" goes back, "!" exits}:
Document Root Directory [opt/SUNWwbsvr/docs] {"<" goes back, "!" exits}:
Secure Server Instance Port [No] {"<" goes back, "!" exits}:
Access Manager: Web Container for running Access Manager Services(4 of 6)
Host Name [zone2.corenode.com] {"<" goes back, "!" exits}:
Services Deployment URI [amserver] {"<" goes back, "!" exits}:
Common Domain Deployment URI [amcommon] {"<" goes back, "!" exits}:
Cookie Domain(Assure it is not a top level domain) [.corenode.com] {"<" goes
back, "!" exits}:
Administration Console [Yes] {"<" goes back, "!" exits}:
Console Deployment URI [amconsole] {"<" goes back, "!" exits}:
Password Deployment URI [ampassword] {"<" goes back, "!" exits}:
Access Manager: Directory Server Information (5 of 6)
Directory Server Host [] {"<" goes back, "!" exits}: zone1.corenode.com
Directory Server Port [] {"<" goes back, "!" exits}: 389
Directory Root Suffix [dc=corenode,dc=com] {"<" goes back, "!" exits}:
Directory Manager DN [cn=Directory Manager] {"<" goes back, "!" exits}:
Directory Manager Password [] {"<" goes back, "!" exits}:
Access Manager: Directory Server Information (6 of 6)
Is Directory Server provisioned with user data [No] {"<" goes back, "!"
exits}? Yes
Organization Marker Object Class [sunISManagedOrganization] {"<" goes back,
"!" exits}:
Organization Naming Attribute [o] {"<" goes back, "!" exits}:
User Marker Object Class [inetorgperson] {"<" goes back, "!" exits}:
User Naming Attribute [uid] {"<" goes back, "!" exits}:
Yes, I am using the same key as was used on host1 for access manager. Yes, access manager on host 1 is quite functional right now. Yes, that directory server works. Now I'm really stumped on what to do! Everything in JES seems to work great except access manager, the exceptions it throws really don't help any at all in troubleshooting.
Any ideas?

More info from error logs:
# pwd
/var/opt/SUNWam/debug
# tail -200 amAuth
04/12/2006 09:56:47:127 AM HST: Thread[main,5,main]
ERROR: AuthD failed to get auth session
04/12/2006 09:56:47:165 AM HST: Thread[main,5,main]
ERROR: AuthD init()
com.iplanet.dpro.session.SessionException: AuthD failed to get auth session
at com.sun.identity.authentication.service.AuthD.initAuthSessions(AuthD.java:709)
at com.sun.identity.authentication.service.AuthD.<init>(AuthD.java:229)
at com.sun.identity.authentication.service.AuthD.getAuth(AuthD.java:494)
at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:71)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
# tail -200 amSession
04/12/2006 09:56:47:098 AM HST: Thread[main,5,main]
ERROR: SessionService.SessionService(): Initialization Failed
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server ID.
at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:350)
at com.iplanet.dpro.session.service.SessionService.<init>(SessionService.java:1540)
at com.iplanet.dpro.session.service.SessionService.getSessionService(SessionService.java:382)
at com.sun.identity.authentication.service.AuthD.getSS(AuthD.java:685)
at com.sun.identity.authentication.service.AuthD.initAuthSessions(AuthD.java:706)
at com.sun.identity.authentication.service.AuthD.<init>(AuthD.java:229)
at com.sun.identity.authentication.service.AuthD.getAuth(AuthD.java:494)
at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:71)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
04/12/2006 09:56:47:126 AM HST: Thread[main,5,main]
ERROR: Error creating service session
java.lang.NullPointerException
at com.iplanet.dpro.session.service.SessionService.generateEncryptedID(SessionService.java:588)
at com.iplanet.dpro.session.service.SessionService.generateSessionId(SessionService.java:612)
at com.iplanet.dpro.session.service.SessionService.newInternalSession(SessionService.java:557)
at com.iplanet.dpro.session.service.SessionService.getServiceSession(SessionService.java:501)
at com.iplanet.dpro.session.service.SessionService.getAuthenticationSession(SessionService.java:408)
at com.sun.identity.authentication.service.AuthD.initAuthSessions(AuthD.java:706)
at com.sun.identity.authentication.service.AuthD.<init>(AuthD.java:229)
at com.sun.identity.authentication.service.AuthD.getAuth(AuthD.java:494)
at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:71)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
#

Closing the Second instance of the browser.

Hello,
I am working on a project written in Java. When applet is running in Browser, we can open the new instance of the browser using File->window->new (or pressing CTR-N). Since the second window runns in the context of first window, It is causing some problem.
Is there any way for me to close the second instance of the browser from my Java applet?? If not is there any way for me to disable both the File->new->Window and CTR-N options.
I am new to java and java script. If it is not possible in Java Applet, is it possible in java Script. Please Provide me with full information.
Thanks and Regards,
Ratna.

Hi,
There is no way you can close the browser window that the user opens. Even if there is a way through some hack, it will not completely give u a solution, independant of browsers and all. And moreover it is not advisable to restrict the user like that.
A more elegant way would be to handle it in the server side. I can give u one ligical way. U can make the page expire as soon as it gets loaded. U can do that by using the code below. And you have to have a server side function to check for a request from the same client machine for the same page.
<%
    if (request.getProtocol().compareTo("HTTP/1.0") == 0)
        response.setHeader("Pragma", "no-cache");
    else if (request.getProtocol().compareTo("HTTP/1.1") == 0)
        response.setHeader("Cache-Control", "no-cache");
    response.setHeader("Expires", "-1");
%>So when the user opens a new browser window, he will be shown page expired message, or the page will be requested again from the server. U can have a map storing the remote address and the session of the user.

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked. What am I doing wrong?

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

How do I set up a second home network that bypasses Open DNS?

I have been having trouble downloading and streaming itunes content because I use Open DNS on my network.
There have been many posts about disabling Open DNS to solve the problem but if I do that, my internet filter goes away.
I would rather set up a second network that bypasses Open DNS and use it only for my Apple TV.
Is this possible and if so, how do I do it?
I have airport extreme base station with a second airport to extend the range, mac desktop, mac laptop, ATV, several iphones and ipads.
I'm running OS X 10.7.5.
Thanks in advance!

Are you suggesting that I go into my Airport router settings and just blank out the DNS settings and then reboot it?
Yes, exactly. You can always input those addresses again, if it does not solve the problem.
OpenDNS may offer some advantages over your whatever your ISP uses for DNS but optimizing download speed is not one of them.
Maybe I have jumped to the conclusion that Open DNS is the problem when maybe it isn't.
It is possible. As I understand it, Apple's servers attempt to use a location near you to deliver iTunes content, and OpenDNS may result in pointing it to a less ideal location.
3 hours may or may not be normal for HD movie. The download speed depends on a number of factors that are difficult to surmise without knowing details about your network and your ISP.

At odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

at odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

That second one sounds like malware.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Setting mnemonic on second instance of character

Similar Messages

Maybe you are looking for