Setting number of rings for incoming call
how does one control the number of rings regarding incoming calls before it goes to voice mail.
You can do it manually - it's a bit of a fiddle but it works. You need to specify the length of time in *seconds* that you want your phone to ring, before voicemail kicks in. This article describes how to do it step by step - I've followed it and it works perfectly
http://www.iphonefaq.org/archives/971382
Hope that this helps
Similar Messages
-
My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?
Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion. There should be a row of icons at the top of a grey field. if the quarter-moon icon is bright white, tap it. If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.
-
Can anyone help. My new iPhone 5S does not ring for incoming calls. It vibrates. How can I get ringer to work?
Hello lyngos,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS2802
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
Best of luck,
Mario -
Increasing the number of rings on incoming calls
How can I increase the number of rings on the 8800 for incoming calls? Currently,I can set only 3 rings and that is often not enough time to get to the device. Any help greatly appeciated.
Solved!
Go to Solution.What do you mean by you can se three ring? You can set 3 vibration for profiles settings. Number of time your deivce will ring is dependent on your carrier.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
Number of rings on incoming calls
Is there a way to increase the number of rings on an incoming call on a Razr Maxx? 3 rings just doesn't cut it.
No, it's set by the system at 30 seconds. Using a different ringtone sometimes helps.
-
TS1630 My iPhone 4s no longer has an audible ring for incoming calls?
My phone no longer rings to announce incoming calls?
I too have no audible ring for calls, no sounds for games, text alerts, etc. I do not have the silent switch turned on. This occured last night while playing Words for Friends. I've checked sounds under settings and sounds is turned on. Any solutions?
-
I accepted the push to update my iphone to iOS6....now it will not ring. It blocks calls from my landline. Help! I've tried resetting, etc.
It has been caused in an OTA glitch. You need to hook it up to your computer, restore and update off of iTunes. Good Luck.
-
IPhone 4 does not ring for incoming calls
I got the iPhone 4 two days ago, and I noticed that when someone calls me, the phone will vibrate, but it will not ring. The volume on the ringer is set to the highest level. I downloaded an update for the phone 2 days ago. What can I do to get my phone to ring? Do you think the update had anything to do with the problem?
Thank you in advance for your help!Hello Dracheskind,
Have you corrected the issue with the ringtone volume? If not, make sure the Ring/Silent button above the volume keys is turned on (if off, orange sticker will appear). Then go to settings > sounds > Ringer and Alerts > change the volume to loud. The vibrate options can stay on. If all of these settings are enabled, try changing the ringtone.
For additional assistance, go to http://www.apple.com/support/iphone/
Thank you, -
My iphone will not ring when calls come in. I have it set to ring and vibrate. The Do not disturb is turned off and I have reset it but still it will not ring. What can I do?
Check and see that the silent mode switch on the upper left side is toward the front of the iPhone and there is no orange or red showing.
-
Hello, can anyone help Me? I have a problem with the external speaker of my iphone 4s. It works when i get calls, messages etc but nit for any app. The headphone does still work. The volumebuttons also do not show the regular volume bar. Any ideas please?
Clean the iPhone charging port with a clean dry toothbrush. Dust or debris is causing iPhone to believe it is in Dock station.
-
RTX Dualphone 3088 - no longer rings for incoming ...
Hi
I have followed the manufacturer's advice, reset, rebooted, turned call forwarding off (don't know why they suggest this) but to no avail - my two RTX Dualphones won't ring for incoming calls.
However they do seem to place calls fine.
All the ring tone setting seem to be on and the volume set to max.
Any advice? Is there a hidden mute button? Or another work around.
Thanks in advance!I have had three of theses phones and the ringing tone on all three has failed after about eighteen months. I was about to buy a fourth phone when I decided that enough was enough and tried a home repair. I ripped a speaker out of a redundant mobile telephone and fitted into the RTX and, hey presto, ringing tones once more. This is an obvious fault with this model which has been reported by many users and one would have thought that there would have been some modification of the faulty speakers by now but, hang on a minute. If I have bought three and was considering buying a fourth how many replacements have other people bought? That's a nice little earner for RTX so why bother! I certainly won't be buying another one. I have traced the fault and will repair the other two once I have found suitable replacement speakers. This fault detracts badly from an otherwise excellent piece of equipment.
-
HT1413 how to set the ringer to flash the camera flash for incoming calls
I have seen other iphone 4 have their riinger set up to flash the camera flash for incoming calls. I have not been successful to figure it out from the settings feature. does anyone know how to do this?
Hi jdflo50,
The feature you are talking about was introduced in iOS 5 Software Update v1.0:
http://support.apple.com/kb/DL1456
Accessibility improvements
Option to light LED flash on incoming calls and alerts for iPhone 4S and iPhone 4
Settings > General > Assessibility > LED Flash for Alerts
Hope this helps!
- Judy -
How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.
Hi rsample,
Thank you for visiting Apple Support Communities.
Your symptoms make it sound like the iPhone side switch is set to silent mode.
iOS: Understanding sounds, ringtones, and alerts
Set your device to silent mode
iPhone: Toggle the Ring/Silent switch on the side of the device.
Best Regards,
Nubz -
After update to OS4.2.1 I can not get the ringer to work for incoming calls
after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring
God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..
-
How to set the number of rings for the agent phone rings before it get the not prepared state
hi, how to set the number of rings for the agent phone rings? before it get the not prepared state.
thanksThe following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
What you are looking for is called "Ring no answer time". It is set in the Agent Desk Setting List tool.
Regards,
Kevin
Maybe you are looking for
-
Itunes freezes when verifying ipod when ipod is connected
So yer my itunes has frozen as soon as i connect my ipod. Constantly telling me it is 'verifying' .. problem is the 'verifying' never ends.. does anyone have a solution for this? ive tried redownloading itunes but no luck.. this only started occuring
-
How to transfer pictures taken with Iphone on my PC?
Hi, I just don't know how to copy or transfer pictures taken with my iPhone on my PC. I know to do it the other way round (pictures taken with my photo camera and transferred on my PC); to copy pictures from my PC on my IPhone. A friend of mine has t
-
Delivery costs not reversed (MIGO - 102)
Dear all, I need to cancel a material document (101) of which the freight costs correctly posted (101), with 2 different condition types and a different vendor for each of them. Now with MIGO (102), I am able to reverse the freight costs for the firs
-
Javadoc comments for classes included in the sdk
My question is pretty simple: For any class that I come across in the online java documention provided on this site, can I assume if the javadoc page does not include a @since tag, that it has been there since java 1.0? Specifically, I'm wondering ab
-
HT3368 "Upload failed because of an unrecognized error" in Keynote when trying to upload to youtube
So im done my keynote, and i wanna put it on youtube. Nope! It says "Upload failed because of an unrecognized error.". How do I fix this?