Setting of FND: Migrated to JRAD to use MDS

*** Making sure the value of FND: Migrated to JRAD of the application you're working on is set to 'Y' before you test your MDS ***
Note:275874.1
Oracle Applications Framework Configuration Notes Release 11i (11.5.10)
FND: Migrated to JRAD
This value is set at the application level to either "N" or "Y".
"N" :indcates that the page definitions for that application are retrieved from the AK repository. Check the list below to see if an interoperability patch is required for that application.
"Y" :indicates that the application has been migrated to run against the MDS repository. You will generally not need to apply an interoperability patch for that Self Service application.
*** We checked and found that the value was not set ***
Note: The value of this Profile Option is set during patch application. Do not modify the value of this Profile Option manually.

Hi Timber,
When you talk about defining the size of the objects in % of the browser, I think you are talking about the responsiveness of the site. If yes, then it is not possible to create responsive sites in Muse at the moment. But yes, you can define 100% width for some items and full screen slideshow only.
Regards,
Aish

Similar Messages

  • I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different p

    I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different place than where it is on frame 2. Confused!

    Hi Melissa - thanks for your interest. Here's the first frame, the second frame and the tween frame. I don't understand why the tween is changing the position of the object in frame 2, was expecting it to just fade from one frame to the next.

  • Can separate apple ids be set up for individual family members that use different devices?  Several iPads are tied to one Apple ID (email address). Thank you.

    Can separate apple ids be set up for individual family members that use different devices (iPads & iPhones)?  Several family members are tied to one apple id (email address).  Thanks.

    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID?

    Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID? SO i could iMessage if out from my iPod to my iPad at home to be viewed by a family member?

    Look into using Apple Configurator.  It's the easiest way to "reimage" and Manage iPads that I know of right now. 
    http://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
    Also, look into using the Educational Volume Purchase Program, if you have not already done so. 
    http://www.apple.com/education/volume-purchase-program/

  • HT201342 How can I change the USER of my i-cloud address? My 12 year old set up the e-mail account and used a silly user name (like: turtle!!). I would like to have an icloud e-mail account but under my own user name. The other /old name can be deleted?

    How can I change the USER name of my i-cloud e-mail account? It was set up by my son and he used a silly / embarrassing user name. I would like to change this name OR set up another i-cloud e-mail account under my own name / reference. Help?

    iCloud email addresses can't be changed or deleted, but you can set up an alias namethat he can use which will be linked to his current iCloud account and will receive email in the existing iCould inbox.  This guide explains how: http://support.apple.com/kb/PH2622.

  • Can I set a default home page when people use my router?

    Can I set a default home page when people use my router?
    Can I set it to my web site for example so that people have to go there when they connect?
    Thanks,
    Paul

    Hello EireReality. Welcome to the Apple Discussions!
    Can I set a default home page when people use my router?
    No, at least not that I'm aware of. Setting a "default home page" is typical feature of a web browser, not an Internet router.

  • I want to set up wireless speakers in my yard using my phone as the remote to run music on my computer and ipad.. what do i need to do this?

    I want to set up wireless speakers in my yard using my phone as the remote to run music on my computer and ipad.. what do i need to do this? I have an airport extreme.. wireless set up.

    I found these speakers after I posted
    Audio Unlimited SPK-VELO-003 Premium Indoor / Outdoor Wireless Speaker System w/ Remote Contro
    I am thinking someway I should be able to send my music through airplay or homeshare to a speaker... hopefully wireless outside.. i know you can do it inside wiresly  but can you do it outside?
    I do not want to run speakers wires all over my yard.
    Thanks

  • How do I set up my Airport Extreme to best use multiplayer games locally

    How do I set up my Airport Extreme to best use multiplayer games with my family. Everyone is located in the same house and uses the same router.
    I have tried a few games but have not  successfully connected  2 players

    That is a weird question, as your GAMES could be interpreted a hundred different ways. Are we talking about third party devices here or what?

  • HT4061 I never set up a paascode and haven't used my ipad in about 2 wks. now its asking for a passcode to unlick. help

    I never set up a paascode and haven't used my ipad in about 2 wks. now its asking for a passcode to unlick. help

    LOST PASSCODE
    You should be able to remove the passcode by restoring the device.
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
    Right-click the device in the left column and select Back up.
    When the backup is complete, select Restore.
    When finished, restore from your most recent backup.
    Otherwise read this
    If that doesn’t work  you will need to perform a factory restore to remove it. Or read:
    Enter Wrong passcode
    http://support.apple.com/kb/ht1212

  • How to set up remote access on wvc80n without using TZO

    Just purchased the WVC80N, but how do you set it up for remote access without using TZO?  I can not get TZO to work w/ my Uverse 2wire 3800-hgv-b router.  Please help as the uverse customer support has not been helpful with port forwarding either.

    Hi, I'm a newbie at this, so pls be patient with my terminology...  I want to install 2 or 3 of these cameras in my mother's home, and I will have AT&T DSL service (one dynamic IP address) there with only a modem/wireless router.  I want to access the cameras from my laptop or from my Blackberry Tour when I am traveling.  Also want to allow access for my other relatives.  I do not have another home computer to serve as a WHS, and my laptop is obviously not connected to the internet all of the time.  Can I use the DDNS setup with DynDNS to provide access?  The instructions that I read seemed to imply that I needed a WHS in order to forward ports, etc.  Thanks in advance for your help.. Garry

  • How do I set up my new Macbook Pro without using the annoying Voiceover?

    How do I set up my new MacBook Pro without using the annoying Voiceover?  I cannot get it to work right; it seems to get stuck and repeats the same thing over and over.  It is driving me nuts!  Is there a way to begin the setup process without using the Voiceover system?  I am a new convert from a PC and I thought a Mac was supposed to be "intuitive!" 
    Any help is appreciated.
    Thanks.
    Pamela

    There is no good reason to register your Mac anyway.
    You can opt out of the setup process and registration by pressing Command (Apple key) and the "Q" key.
    The registration process requires you to divulge a lot of unnecessary information.

  • How do I set up a secured WI-FI account using Airport Extreme

    How do I set up a secured WI-FI account using Airport Extreme

    Read the user manual that came w/it! 

  • How to set my own gui status when i use selection-screen

    how to set my own gui status when i use selection-screen command
    and
    how to set the names in the application tool bar when function keys are created

    Make sure that you do this in event "AT SELECTION-SCREEN OUTPUT".
    Run Txn ABAPDOCU and check 'DEMO_SEL_SCREEN_STATUS' for sample.
    Also check out following discussion -
    Selection Screen PF-STATUS
    Cheers,
    Sanjeev

  • How to migrate pricing condition data using lsmw

    Hello All,
                 can any one explain how to migrate pricing condition data using lsmw.
    the scenario is we are trying to extend the pricing conditions from one sales area to other sales area on a combination of sales organization, distribution channel and division.

    Hi Sreedhar Kodali
    Pricing conditions can be extended with the following options:-
    1)  Customer / material with release status
    2)  Sales Org / Dist. Channel / Cust group / Material
    3)  Price List category / Currency / material with release status
    4)  Material with release status
    Assuming that your pricing condition in one sales area is different to another, first you have to create LSMW recording to extend the sales area and then pricing conditions can be uploaded accordingly.
    Thanks
    G. Lakshmipathi

  • Setting Importance Level for a email message using javax.mail.* API

    Setting Importance Level for a email message using javax.mail.* API
    From what I understand we can set Flag on Email Message. How can we set Importance Leve: High/Low for an email message?
    Thanks
    Purvi

    Most of the message Flags work only for IMAP mailboxes. POP3 supports only the DELETED flag. It must be understood that Javamail is a framework which provides all the features available in a standard mailing system. But whether or not a particular feature works is a functionality of the particular implementation being used.
    Thus for example POP3 cannot differentiate read from unread messages in a mailbox though Javamail provides that feature.

Maybe you are looking for

  • Total and Subtotal for set_table_for_first_display

    Hello, I am displaying data in ALV by using set_table_for_first_display , i want to do_sum  for 10-15 columns starting from the column index 11.. and i have also passed the value in internal table of type LVC_T_SORT and in the fieldcatlog this fields

  • Pricing not determined based on Customer hierarchy

    Hi All, I searched the forum for the specific issue, but could not find a proper solution. I have a specific scenario where we are migrating from 4.6C to 6.0.  The hierarchy is already maintained in 6.0 version in a way which we need to adopt it.  Th

  • PORTAL30.wwa_app_module.file_download failed

    I have a table with a blob type, and in a form a File Upload Binary I try download documents but sometimes, I have this error http://heimdall.gva.es/pls/portal30/PORTAL30.wwa_app_module.file_download?p_block=DEFAULT&p_object=PATH&p_source=AAAHAEAAHAA

  • What to do about quality????

    I shot some video with my Canon G20 in full HD and made a video with adobe premiere pro and encore. The problem is, When I play it on the tv, it is terrible quality. Will someone please help me to figure out how to make the quality of this video the

  • How do I find out if Dell AIO 944 printer is compatible?

    I just recently purchased a Dell All-in-One 944 printer for my windows laptop, but then decided to make the switch over to Mac. When I try to add the printer Dell is not among the list of the printers to choose from. Is there a way to make this print