Setting of tolerance limit while Process Order confirmation

Dear Experts,
I want to set tolerance limit onto the components of Process Order while doing the Process Order confirmation, Please teach me what all the steps do i need to follow for doing that.
Thanks!
Regards
Sumit Kalyan

Tolarance limit what you are speaking about is for the components. In wS view what you are setting up is the for the product, not for component.
As I am aware we cannot set any tolarance limit for the component as such.
I am not sure what actually you want.
example - component  A, as per the planned qty in production order is lets ussay 10, now when doing confirmation user can enter 10+ or - 1, if he neters moer than 11 or less than 9 system should not allow? is that you are trying to implinment?
If so that mayn not be possible unless otherwise you impliment some user exit.
In OPK4 what settings are there is for product and not for raw material/component

Similar Messages

  • CORK error at process order Confirmation

    Hi all
    While Process order Confirmation (CORK) iam getting the following error
    G/L account 499999 is not defined for chart of account 1000
    Message no.F5507
    I have run the same in Dev. Client
    but unable to do in the quality client
    i have checked in OBYB in both the clients
    setting are same
    plz.. provide the solution
    thanx in advance
    useful solution points will be awarded

    Hi,
    While confirming the Process Order, the following will be the effect in Accounting
    FG Stock Account Dr.
    To COGM Account
    The followings are the possibilities in your quality client
    1. whether you have defined the above account in Chart of Account and Company code segment level?
    or
    2. You should check it in OBYC > GBB > AUF (COGM account) and in BSX key (Stock account for Finished Inventory)
    or
    3. Whether it is blocked for posting or marked for deletion at Company Code level or Chart of Account level?
    Regards,
    Jigar

  • Set loss quantity to a fixed percentage in Process Order Confirmation - C0R6N

    Hi Experts,
    How it is fixed the loss qty percentage at the time of process order confirmation.
    I want to set the loss quantity to a certain percentage when compared to the Total Process order quantity.
    For Example:
    If the Total processed quantity = 100
                            Yield Quantity = 20.
                             Loss              = 80.
    This kind of scenario should not happen, since Loss quantity is very much higher that the yield quantity.  I want to set the loss quantity  to a particular percentage ( say 20-30 %) of the total processed quantity so that the yield quantity will be higher than the loss quantity by a substantial amount. Are there any possibilities of doing this through configuration. If not what are the other options?
    NB: Scrap quantity is not maintained at the time of  process order confirmation.
    Regards,
    Umapathy.

    Hi Umapathy,
    Yield and Scrap are user entry fields where you can have restriction on entered qty by changing  under delivery and over delivery to error through OPK4 config as shown below. Agree that any qty can be entered in any field (Yield or Scrap)
    OR
    You can define the operation scrap. Read the below doc for more details.
    http://scn.sap.com/docs/DOC-52834
    OR
    Another option is to use exit and write your logic based on input yield and loss.
    Thanks & Regards,
    Ramagiri

  • Problem with creating Process order confirmation using BAPI

    Hello,
    While creating Process Order confirmation using BAPI_PROCORDCONF_CREATE_TT, material document is getting created. But a line item is inserted in the table AFRU without material document number. When it is created manually using the transaction COR6, the table is getting updated with material doc in the line item. Can anyone let me know what other attributes to be passed in order the update the same?
    Thanks in Advance.
    Regards, Senthil G.

    Hello , I am working with the same Bapi, can you please send me the code to fill the parameters, if I find the same error like you, I will send you the solution if I correct that.
    Thanks for your help.
    [email protected]
    Guatemala, Cempro ADATSA

  • Problem during Process Order Confirmation - COR6N

    Dear All,
    We are into process industries
    Till now we are creating different BOM for each section and different process orders for each BOM.
    For example Pulverize, Acid MIXING, Continuous Rotery, Blending and Packng.
    Now we have created new BOM for FG - showing all input/output of  RM, SFGs.  In Recipe, define operation for each section. and assign operation to material.  I have attached screenshot of Recipe Operation.
    During process order confirmation, system shows movement type of all material perfectly during each phase. But during confirmation of last phase system does not show 101 movemet of FGs.
    I have checked in Recipe, control key is ok i.e. Automatic GR,  in OPK4 setup is also correct.
    We have created new BOM and Recipe. There is no change in other configuration parameter.
    Thanks and Regards,
    Nirav

    Hi Nirav
    The automatic goods receipt is defined by the operation/phase control key.
    Control key PI03 has the automatic goods receipt setting by defaul.
    Analyzing the screenshot I could observe that this control key is assigned to all the opration/phases, however, it should only be assigned to the last operation/phase, where the goods receipt will actually take place.
    For all the previous operations/phases you should use a different control key, without automatic goods receipt, such as PI01.
    BR
    Caetano

  • Userexit/BADI change Overdelivery Tolerance Limit in Purchase Order / MIGO

    Hi,
    i woould like to implement a own logic to set the Overdelivery Tolerance Limit in the order or MIGO. IIs there any badi/exit where I can do this?
    I tried with the exit EXIT_SAPLEINR_001 but it doesn't work.
    Thx
    Cheers
    Hannes

    Hi,
    thx for the answer.
    The BADI MB_DOCUMENT_UPDATE is only used when i save the migo. I need some point earlier since otherwise the error message appears that i i can not book more pieces as in the order.
    The Exit MEQUERY1  is only used for define a own preselection in the order and MEVME001 contains the exit EXIT_SAPLEINR_001 which i implemented but does not work.
    Other suggestions?
    Thx
    Hannes

  • Loss % in process order confirmation

    Dear all,
    During process order confirmation,loss should not to take above 10%.
    It should be within 10%.
    Kindly let me know hat customization to be done for this scenario
    Regards
    Rajasekaran

    Hi,
    In the confirmation parameters in OPK4 in the checks option in the under delivery maintain error when quantity falls below under delivery tolerance and in the material master in work scheduling view in tolerance data maintain under Underdely tol as percentage and check...
    Thanks
    Kumar

  • OPK4 Process Order Confirmation parameter

    Dear All,
    In process order confirmation i want do a configuration like
    Operation 10     
    Phase      20     0010(supr.ope)
    Phase      30     0010(supr.ope)
    Operation 40
    Phase      50     0040(supr.ope)
    now I maintained a relationship between 50 & 30 like "30 is predecessor of 50"
    I required during confirmation if confirmed quantity of phase 30 is 50 and now if I go for phase 50 confirmation system should not allowed confirmed quantity >50 of previous confirmed operation 30
    for that i have done setting in OPK4 like
    Checks
    Operation sequence " E Error when operation sequence is not adhere to"
    but system is allowed to do a confirmation more than 50 qty of operation 30
    so what is the meaning of operation sequence check in PPPI
    Regards,
    Murari Shah
    Edited by: murarisap1986 on Apr 6, 2011 7:50 AM

    Dear Murari shah,
    "E Error when operation sequence is not adhere to" This is to avoid the operation confirmation if it's not in sequence.
    For example,assume there are 5 operations in an order,directly i can't confirm the operation 0050 unless it's prior operation is
    confirmed.So the system checks whether the prior operation is first confirmed,if not the system proposes an error.
    So for this reason, we can make the necessary seetings in OPK4 for plant and order type combination.
    check and revert.
    Regards
    Mangalraj.S

  • In-process inspection...how to stop the process order confirmation?

    Hi...i'm making an in-process inspection and i want to stop the movement to the next phase or the process order confirmation, until the usage decision is made...how can i make this ?

    Dear,
    You can do this with OPK4 setting here slect your plant and process order type go in details here change the setting to
    Results Rec. (QM) = Error message  if no inspection result exist.
    Regards,
    R.Brahmankar

  • Tolerance limit for STO orders

    HI
    I want to set the tolerance limit for under delivery and over delivery qty tolerance. Where can we set the tolerance limits for stock transfer orders from plant to plant ?

    Please check OSS notes:
    Note 1093582 - FAQ: Delivery complete indicator ELIKZ
    5. Question
    In which cases does the system automatically set ELIKZ in stock transport orders?
    Answer
    ELIKZ will be set at the goods receipt stage automatically, if the GI = GR quantity. This behaviour applies to intra-company stock transport orders and cross-company stock transport orders. See note 196280.
    With stock transport orders the 'delivery completed' indicator is only relevant when there is no stock in transit The tolerance quantities from the purchase order are not taken into account.(see note 34737).
    It is possible to modify the standard to allow to set the "delivery completed" indicator for cross-company stock transport orders. This modification is contained in note 167795.

  • Standard Value doesn't carried to Process Order Confirmation

    Dear Experts,
    I was trying to run Process Order Confirmation via COR6N but I found out that the Activities shown are NOT consistent with the Activities set in Master Recipe.  The following are the figures shown in master recipe, process order and order confirmation.
    Master Recipe (via C202)
    Base Qty =1
    Operation/phase = 0020
    1st Standard Value (activity 3 setup) = 1Hr
    2nd Standard Value (acitivity 1 machine) = 2Hr
    3rd Standard Value (activity 11 labour) = 3Hr
    Process Order (via COR2)
    Order Qty = 1,000
    Operation/phase = 0020
    Setup (to be confirmed) = 1Hr
    Machine (to be confirmed) = 2,000Hr
    Labour (to be confirmed) = 3,000Hr
    Order Confirmation
    Operation/phase = 0020
    Machine time (to be confirmed) = 1Hr
    Labour time (to be confirmed) = 2,000Hr
    My question are as follows :-
    1) Why the Machine time NOT same as in Process Order
    2) Why Setup time NOT shown in Order Confirmation
    Does anyone have any idea?
    regards,
    Abraham

    Hi,
    all the master recipe, process order and order confirmation, including the material master are maintained by myself alone.
    Is it due to some parameters are not defined properly such as in the formula key?
    The formula key are defined as below.
    Formula key defined in OP21
    Setup  = SAP005 = SAP_01 x SAP_11
    Machine = SAP006 = SAP_02 x SAP_09 / SAP_08
    Labour = SAP007 = SAP_03 x SAP_09 / SAP_08
    Paramater defined in OP17
    SAP_01 = Setup
    SAP_02 = Machine
    SAP_03 = Labour
    SAP_08 = Base Quantity
    SAP_09 = Operation Quantity
    SAP_11 = Operation Splits
    I'm a bit confused with these formula keys.  Could you explain to me how they work?
    regards,
    Abraham

  • BAPI For Process Order Confirmation

    Hi,
    For Process Order Confirmation we are using the following tcode. COR6N. in the t-code we are include a new field (Shift Field) with help of CONFPP07. and we made the field as mandatory also. in cor6n it is working fine.
    now we are using the bapi for same Process Order Confirmation. here the new field is not available. we want to include the new  ( Shift ) Field also. we are using the following
    BAPI Fm: BAPI_PROCORDCONF_CREATE_TT .
    Regards
    Sathis

    BAPI_PRODORDCONF_CREATE_TT to confirm a production Order
    Erwan

  • Product Costing - Process Order Confirmation

    Dear Experts,
    We are facing a situation with our Product Costing Scenario :
    Under SFG Process Order Confirmation, there are Ten Phases to finally confirm the order. First Phase is for Raw Material Issuance. From Second Phase to Ninth Phase are relevant to Activity Types. Tenth Phase which is final phase, in this point Goods Receipt posting is generated.
    At first phase, system posts Raw Materials Goods Issue (Movt Type 261) to Process Order:
    Entry : RM (Cr), Consumption (Dr).
    Client needs the system to post one more entry at the same time by : WIP (Dr), Inv Change (Cr).
    Reason:
    According to client, they have made consumption entry in finance but what if all raw materials are not consumed as yet and factory comes under fire, then how can they claim insurance on those Raw Materials which are not consumed and are still in the IN PROCESSING Stage?
    My Answer was:
    - They can find all material costs in Process Order as Debit Item.
    - They can also calculate WIP but cannot post WIP in Finance unless the order is settled.
    Ultimately, as per my knowledge client cannot check the unprocessed Raw Materials report in FI but they can check in CO. And this is the point of reservation from client.
    They need an entry in Finance for WIP to claim insurance in case of fire and therefore they need a posting of  WIP entry immediately after Goods Issue of Raw Materials to Order.
    Can anyone please guide me further regarding this scenario and if any one can suggest any work around then it would be highly appreciated!
    Regards,
    Zain Bashir 

    Hi Zain
    This is a very unusual question
    Buddy, there is something in accounting called as "Going Concern Concept" which we all were taught in our accounting days.. That means when you do business, do it with a mindset that you are goinig to do it for long / for ever.. Accidents dont happen every day and you cant build a system around such things
    Assume there is a fire (God forbid).. After the accident, you wont even know how much was  lying there unconsumed which got gutted in the fire..
    And insurances not just covers the stock lying consumed, but also stock manufactured and stock in the process of manufacturing (WIP)
    And most importantly, dont expect SAP to throw up a figure at the click of a button.. Does your client really think that they will simply submit the report generated from SAP as-is to Insurance people?? SAP is just a technology enablement, which requires human intervention at various places
    My opinion - Dont build system for such requirements
    Br. Ajay M

  • Update Process Order Confirmations Back to SAP ECC

    Hi,
    Is there a document or step by step guide which explains how i can update  SAP EARP with process order confirmations from my shopfloor?  Below is the scenario i am looking for help in
    1. There is a SQL server table where the SHOP floor update the quantity manufactured against a Process order.
    2. I need to pick up that data from the SQL server table and update the ERP against that Process order.
    Can any one explain how this can be achieved.
    I checked the sample's and the templates in SDN but none of them actually show how to update any ERP?
    Please advice!!.
    Regards
    Suraj

    Check this one
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60ac6bb8-a684-2b10-208d-b90883004a5e
    https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/204a13d0-399d-2b10-ec84-9c254cd7efd4
    You use this component to enable the shop floor operators to record their production order and process order confirmations using a touch screen user interface. In SAP ERP Central Component (SAP ECC) operators must complete many steps to confirm orders. Instead, you can use this interface, on a touch screen to enter the production performance easily and effectively. You can also use this component to obtain operators' work lists and information on their current activities.
    Regards
    Ram Upadhyay

  • In process order confirmation screen there should be 2 rows for down time.

    hi,
    We are using cor6n for process order confirmation, where we can put down time  with confirmation text at once,
    if there is two different down time, then user has to again  run cor6n with 0 yield  for put another down time, which gets more time.
    for this reason i have customised single screen entry profile by mentioning two down time & confirmation rows in screen.
    when i going for confirmation i put two different down time  after goods movemnt order get confirmed & settled.
    but when i see report in COOISPI  there is only one down time against order.
    system only considers last down time.
    hows the system consider down time?
    thanks in advance.
    regards
    sanjay.

    Hi,
    The report COOISPI considers only one line of the down time, it is not considering the 2nd row of the down time. You need to change the COOISPI program to read the 2 lines of the down time. You need to change the standard program to read the 2 down time lines.
    Thanks & Regards,
    V. Suresh

Maybe you are looking for