Setting permissions on a report group

I have created a new report group in P6 and added a bunch of reports to it.
is there anyway to restrict who sees this report group ?
Or a way to hide it ?
Edited by: Jay on Jan 6, 2011 12:21 PM

You cannot set permissions on a group, however you may wish to consider using reports 'owned' by a project. Simply open this special project along with the projects you wish to report on.

Similar Messages

Setting Permissions on a Report in Infoview

Is it possible to set permissions on a particular report in Infoview so users can only view the reports which they have run themselves (not view any reports run by other users)
Thanks

Hello Natalie,
as you mention Infoview I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Setting CUIC user permissions for all reports at once

Hi all,
We are using CUIC 8.0(4) Standard Edition and trying to set CUIC user permissions, such as Read, Exec and Write, for reports.
If we need to give access to all reports then we should set permissions for each report separately.
Is there any way to set those permissions for all reports at once?
We attempted to set Read, Exec and Write premissions for the Reports, Stock and UCCE folders but no luck.
Thanks.
Nikolay

Hi all,
We are using CUIC 8.0(4) Standard Edition and trying to set CUIC user permissions, such as Read, Exec and Write, for reports.
If we need to give access to all reports then we should set permissions for each report separately.
Is there any way to set those permissions for all reports at once?
We attempted to set Read, Exec and Write premissions for the Reports, Stock and UCCE folders but no luck.
Thanks.
Nikolay

Why can't Firefox set permissions for Snow Leopard Server Web-Site Wikis

I've established a web-site for collaboration of planning for a state-wide NGO and a local citizens-government oversight commission.
I'm using Snow Leopard Server v10.6.4, to drive the web-site, which includes the use of wikis.
In creating a wiki and setting permissions, I find that I cannot set permissions for users or groups to 'read only' from the default 'read & write' while using Firefox. However, I CAN set them to 'read only' using Safari. And, once the permission has been modified in Safari, THEN it can be modified in Firefox.

Solution found at http://michaeljin.wordpress.com/2010/01/05/locked-out-of-mac-os-x-server/
It’s blog update time! Updates have been a little scarce lately, been super busy with getting trophies on PS3
Anyway, recently encountered the following with a Mac mini server running Snow Leopard Server:
Despite being able to ARD / Screenshare the Mac mini, I was unable to get any further than the login window. Authentication credentials are obviously valid. No weird access permissions have been set. However, the weird thing was, I can connect to the server via Server Admin tools (from another Mac) and all other services were running without a hitch.
After much head scratching it turns out to be a sACL (Service Access Control List) issue.
This thread solved the mystery!
http://discussions.apple.com/thread.jspa?threadID=1654864
To save you the trouble, I’ll lay it out here. I cannot take credit for this, but Randall can!
Open Server Admin on a computer (any), and connect with the local admin to the machine.
Select the server and authenticate.
Select Settings, then go to Access. You’ll want to make sure that Login Window and SSH have the local admin account listed if you select the option to “Allow only these users”. For now, I would suggest making sure all services have “Allow all users and groups” selected.
If (as in my case) it was set to Allow All in the first place, simply toggle the settings – back and forth.
Save.
Try logging in again… should be a good one!

How to set permissions IN Open Directory USING Open Directory groups?

Hi all,
Apologies if I've missed this but have been searching for two days trying to figure out how to delegate permissions within the OD to a number of different OD groups and i can't seem to find any way to do this either at the command line or with WGM.
Examples: an OD group containing those who will manage the full directory need to have permissions on all containers, child objects, and their attributes in the directory. For this one in particular I seem to be able to nest a group in the default Admin group, but this isn't really what i'm after. I need to create OD groups with the ability only to manipulate objects of class apple-computer and similarly, apple-user (really all inetOrgPerson objects). In a nutshell: how do i set permissions on specific attributes or object classes using OD groups?
thanks for any pointers...
-andrew

I think i just answered my own question: Open Directory is OpenLDAP. slapd is all i need.

Please Help, After Kernel panic restart failed- apple swirl(6 hrs), SafeMode-failed, SUMode-sucess. Could not unmount disk to erase. Repair permissions-multiple fail errors:unable to set permissions on... unable to set owner and group...

Please Help, I deleted an account that was the same name as the administrator but was not the administrator. Also a samsung galaxy s phone was charging through the usb port.
I closed out a program and got a message that the temp file could not be stored/saved.
Then a Kernel panic message occurred and restart was necessary.
The restart resulted in the screen with the apple logo and a continous swirl for 6+hrs,
Attempted Safe Mode start up, unsuccessful,
Single User Mode-sucess.
Ran $ fsck_hfs -rfd /dev/disk0s2 Ran several times repairs made with one which remained. something about a node.
No change in start up attempts
Started with install CD matching current OS 10.6
Ran Disk Utility Repair Permissions resulting in multiple errors:
One line/error
Warning: SUID file /////Ardagent has been modified and will not be repaired
144 lines/errors of this type of series of lines
Group permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
unable to set owner and group...error 22: Invalid Argument
unable to set permissions on...error 22: Invalid Argument
Ran Repair Disk, result:
Error: Could not unmount disk (in red)
Ran Verify Disk, result:
The volume HD appears to be ok (in green)
Next I attempted to erase the dist to start from scratch since I have data backed up on time machine.
Error message box
Volume Erase failed
Volume Erase failed with error:
Could not unmount disk
I am looking to solve without buying DiskWarrior unless only resort.

So it looks like solved it for now I will update later. What I did was after starting from the install cd for the 10.6 system I ran from terminal ran:
diskutil disablejournaling /dev/disk0s2
diskutil disableownership /dev/disk0s2
diskutil repairPermissions /dev/disk0s2
then i closed terminal and then when to disk utility and chose to repair disk with results all was fine. Then ran repair permissions and got similar results from terminal function next I erased disk and then chose to restore from time machine and it is now restoring! yea!

How to set different default interactive reports for different user groups?

I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
Thanks

You can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...

Helpdesk Report Group Users - Cannot create a connection to data source 'DataSource1'

Getting the following error for a User accessing the report who is a member of the reporting group. If I add them as a sysadmin in SQL they can get access. What permissions need changing for this user group?
Cannot create a connection to data source 'DataSource1'. ---> System.Data.SqlClient.SqlException: Login failed for user

Dave,
For a complete understanding of the permission and groups, I would rather suggest you to do the installation of the MBAM components in a single server infrastructure in a test environment.
Create the following domain security groups and use it during the configuration of the MBAM roles:-
1) MBAM Advanced Helpdesk Users
2) MBAM Helpdesk Users
3) MBAM Report Users
4) MBAM Read and Write Access
5) MBAM Read Only Access.
Create an application pool account and create a login in SQL for it. Use it only during:-
1) Configuration of "Compliance and Audit Database connection"
2) Configuration for All Web Applications.
If your application pool account is not a domain administrator, the run the following powershell command to set the service principal name :-
Setspn
-s http//<FQDN of MBAM Web Server> domain\<Application pool account>
Make sure the application pool account must be trusted for delegation.
That's all you need to do. Then after the installation you can check the properties of each group in SQL to verify the rights and permission assigned during the installation.
Regards, "Gaurav Ranjan" =========== NOTE: Mark as Answer and Vote as Helpful if it helps =======

Getting error while creating report group using T code GR52

HI All,
Below error is coming while generating report group in T code GR52
"Set 01010002SSS6EL0001 does not contain any entries "
Thanks in Advance......

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

Problem in Exporting a Report Group having a Report Painter Report.

I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
       group 0102CPDNUEA-CCROSI not transported.
       Transport groups separately if necessary.
There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

hi,
I am able to export my report groups with dependent objects successfully.
I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
IF SY-BATCH = 'X' OR NO_LIST = 'X'. "direct or batch
    SET PF-STATUS 'LIST'.
*****PERFORM TRANSPORT_OBJS USING 'X'. "transport all jobs
    IF FILE_EXP <> 'X'.
      READ TABLE WT_E071 INDEX 1.
      IF SY-SUBRC = 0.
        LEAVE.
      ENDIF.
    ENDIF.
ELSE.                                "online
    SET PF-STATUS 'MENU'.
   PERFORM WRITE_TRANSP_OBJS.
ENDIF.
regards,
ram

REPORT GROUP tcode: gr52

I have created a custom program and added it to a standard report group in GR52. But when i execute the Main Report group and try to drill down to the custom transaction code. The sy-tcode is still START_REPORT. Is there a setting i am missing when creating the custom report transaction. While creating the transaction i selected it as a regular report transaction.
thanks
Kshamatha

YOu have to create a "Parameter Transaction"
For "Defualt values" tab,
transaction - START_REPORT
Check the "Skip initial screen"
Press one ENTER here.
GUI support - all 3 checkboxes
Default values (table control at last) .. you can use F4 here for the field optoins on the screen field name
Screen field name
D_SREPOVARI-REPORTTYPE RW " < you report group
D_SREPOVARI-REPORT 5A21 " < report
Save and activate.
Regards
Naimesh Patel

Unable to set permissions in KM Content

Hi all,
I got the following problem:
I'm working with an EP 6.0 SP 2.
Before the LDAP for the Portal was installed I've been creating some users from inside the Portal, with these users I was able to set permissions in the KM with no problems.
Now that the LDAP is installed, all the users I created from inside the Portal have been removed and created again in the LDAP. Now I cannot set permissions anymore in the KM. When I go to 'details > permissions' I just see the permissions already there (the Everybody group and the com.sap.....KMContentManager) but I cannot add, delete or save permissions.
What is the problem? Can be that any role is missing for my user in the LDAP? Can be that the fact that I deleted the previous user which I set the permissions the first time have caused any problem?
Could anybody help please?
Thanks very much in advanced and regards
Stella

Hi Anja,
First sorry for the delay of my answer.
The link you've attached has shown me 2 things:
1st - I have not assigned the service ACL, but checking in another Portal of my other project I see that it's also not assigned, so it shouldn't be necessary.
2nd - What I've also seen is that these system groups have to be created in User Management, and just checked with the UM Team that they are not
So I'm pretty sure the error has to be due to this.
I'll keep you informed if the error gets solved by this and of course thank with points.
Many many thanks
Stella

Setting Up Earned Value Reporting in Project Server 2010, Using Hours Not Dollars

Hello All,
Are there instructions for setting up Project Server 2010 for Earned Value data capture and reporting? I'm not certain that we are capturing the correct data to report EVM (i.e., Physical % Complete), and I was unable to find any videos on YouTube.
Also, I noticed that Project Server 2010 defaults to reporting EV in Dollars. Can we set it up to report in Hours instead?
Julie

Hi Julie,
If you allow to jump in to complement Dale's excellent reply and comment some of your concern...
5. The status date is a fundamental parameter while talking about the EVM (it is ANYWAY a key setting for tracking projects with MS Project). The EV field will take into account actuals up to this date. Meaning that if your project plans have been updated
by the PM on tuesday and you are running the analysis on friday, you set the status date to tuesday and the uncomplete work between tuesday and friday will not be considered as late work since you are running the analysis as of tuesday. The status date can
be set from the "project" tab either in the project information dialog box or directly in the project tab, status group.
6. MS Project proposes 3 EVM tables by default. A table is a predefined set of column which composes a view, together with a Gantt chart or a timephased grid. If you go to the view tab, click on "tables" then "more tables",
you will find EV, EV cost indicators and EV Schedule indicators tables which will display the out of the box EVM fields calculated by MS Project based on the costs, actuals, Baseline, status date.
Then about the cumulative data, you might be refering to S-curves which are a representation allowing you showing the cumulative values of the EV. To do that, you'll have severals ways:
Use the cumulative calculated field in the visuals reports
Create
Dashboards from the report tab using the cumulative data (actual, Baseline, cost)
Create
MDX mesures in the OLAP cubes for cumulative data and create excel reports
Develop custom SSRS reports
Buy a 3rd-party addon
Finally please let me give you an excellent reference for the EVM in MS Project with EPM Central blog articles:
http://www.epmcentral.com/msproject/evintro.php
http://www.epmcentral.com/msproject/evprereq.php
http://www.epmcentral.com/msproject/evterms.php
http://www.epmcentral.com/msproject/evexplain.php
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

[Apache 2] Critical error mod_rewrite: Could not set permissions on rewrite

Hi,
Well I had a look around to this problem and it seems it is specific to mac os system on intel machines, so I send my post here.
I had installed the apache 2 server from www.serverlogistics.com and it seems to start. However it is impossible to log into my local website with an error in my web browser "can't log to "localhost" server".
By reading the logs I got in /Library/Apache2/logs/error_log (where there is also a httpd.pid file): [crit] (14)Bad address: mod_rewrite: Could not set permissions on rewriteloglock; check User and Group directives Configuration Failed
So, I commented the line "LoadModule rewrite_module modules/mod_rewrite.so" in /Library/Apache2/conf/httpd.conf with no efffect at all.
Then I don't know what to do.... any idea please ?
NB : I did not configure or set any htaccess file in any directory.
Denis

denis_4l wrote:
Hi,
Well, I had tried several ways among others MAMP. With, MAMP, I experienced some problems running MySQL and or Apache server.
If you'd like help, you need to describe the specific problems you're having. You're not giving people here much to go on in order to be able to help. Without knowing what you've already tried, and what the results were, it's impossible to say if you've just made a simple mistake or if you've truly hit upon something that won't work. The Apache logs are especially helpful, with lots of detailed information to help in troubleshooting.
To say the true, I bought this Macbook because the system kernel is 100% compatible with Linux, and I was full of naives hopes, thinking that I will install/compile easily softwares that are usual under Linux world.....
I certainly haven't had much problem compiling and installing software that's distributed as source code, though I haven't tried to compile Apache. While it's true that much of the software will compile, it's also true that you might have to make some small changes here and there to the source code to get it to work correctly. But you might also have to do the same thing to get them to compile on different Linux distributions. So OS X isn't that different in that respect.
If you want to get Apache 2 running with MAMP, post back with specific information on what problems you had and I'll try to help. I've been hacking at Apache installations for many years now, so if I know the problems you're having, there's a good chance I've been through them, too.
charlie

To add new characterstics to a report group

Hi,
We have created a report group under 601 library. Structure used is CCSS. But we need the field currency type to be added as a characterstic. Since it is not avialable in CCSS we are unable to do that.Please suggest a way.
Thanks,
Seema.

Hi Shamia,
Check these Tcode for Report painter,
Report painter....
GRR1, grr2, grr3
GS11, 12, 13 for variable
GS01, 01, 03 for sets
GR51, 52, 53 for report group
GR21, 22, 23 for library
for export-import:
-Any new variables (GS17 - Export ,GS18 - Import )
-new sets (GS07 - Export ,GS08 - Import )
-new report (GR37 - Export ,GR38 - Import )
-new report group (GR57 - Export , GR58 - Import )
-new library (GR27 - Export , GR28 - Import )
[Report Painter|http://www.virtuosollc.com/PDF/Get_Reporter.pdf]
Hope your problem solves.
Thanks & regards,
Dileep .C

Setting permissions on a report group

Similar Messages

Maybe you are looking for