Setting Permissions on a Report in Infoview

Is it possible to set permissions on a particular report in Infoview so users can only view the reports which they have run themselves (not view any reports run by other users)
Thanks

Hello Natalie,
as you mention Infoview I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Similar Messages

  • Setting permissions on a report group

    I have created a new report group in P6 and added a bunch of reports to it.
    is there anyway to restrict who sees this report group ?
    Or a way to hide it ?
    Edited by: Jay on Jan 6, 2011 12:21 PM

    You cannot set permissions on a group, however you may wish to consider using reports 'owned' by a project. Simply open this special project along with the projects you wish to report on.

  • Setting CUIC user permissions for all reports at once

    Hi all,
    We are using CUIC 8.0(4) Standard Edition and trying to set CUIC user permissions, such as Read, Exec and Write, for reports.
    If we need to give access to all reports then we should set permissions for each report separately.
    Is there any way to set those permissions for all reports at once?
    We attempted to set Read, Exec and Write premissions for the Reports, Stock and UCCE folders but no luck.
    Thanks.
    Nikolay

    Hi all,
    We are using CUIC 8.0(4) Standard Edition and trying to set CUIC user permissions, such as Read, Exec and Write, for reports.
    If we need to give access to all reports then we should set permissions for each report separately.
    Is there any way to set those permissions for all reports at once?
    We attempted to set Read, Exec and Write premissions for the Reports, Stock and UCCE folders but no luck.
    Thanks.
    Nikolay

  • Permissons problem with Zenworks Reporting Server InfoView

    Hello,
    I am currently haveing a problem with the Zenworks Reporting Server InfoView.
    I can access the Reporting server if i am logged as the Zone administrator however if i am logged in as anyone else I get an error.
    the error that is displayed in ZCC is "An error occurred while trying to launch the ZENworks Reporting Java Infoview. For more details, see the ZCC log."
    here are a few of the lines in the ZCC log
    21 Apr 2009 11:31:08
    Exception Info:
    21 Apr 2009 11:31:08 Class....... com.novell.zenworks.reports.exception.ReportExcept ion
    21 Apr 2009 11:31:08 Message..... com.crystaldecisions.sdk.exception.SDKServerExcept ion: Enterprise authentication could not log you on. Please make sure your logon information is correct. (FWB 00008)
    cause:com.crystaldecisions.enterprise.ocaframework .idl.OCA.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
    detail:Enterprise authentication could not log you on. Please make sure your logon information is correct. (FWB 00008)
    The server supplied the following details: OCA_Abuse exception 10499 at [.\exceptionmapper.cpp : 67] 42040 {}
    ...Enterprise authentication could not log you on. Please make sure your logon information is correct. (FWB 00008) Unknown user
    21 Apr 2009 11:31:08 Logged at... ReportRedirection...382
    21 Apr 2009 11:31:08 ============== Exception (end) =============================
    21 Apr 2009 11:31:08 MessageUtil..........78 :Error: An error occurred while trying to launch the ZENworks Reporting Java Infoview. For more details, see the ZCC log.

    Originally Posted by rohit_kumar
    yes, in 10.2 thats how it is behaving with eDirectory !
    I'm having the same issue, but I can not sign into ZCC as user@domain. User is super administrator, but can not create folders. Administrator can create folders but can not refresh data.

  • DB error while running reports in InfoView

    Hi,
    we are trying to create a report in infoview.
    however we are facing following error while trying to create new webintelligence document or running existing report:
    A database error occured. The database error text is: (CS) "DBDriver failed to load : /bobje/bobje/enterprise120/linux_x86/dataAccess/RDBMS/connectionServer/libdbd_oci9.so (libclntsh.so.11.1: wrong ELF class: ELFCLASS64)" . (WIS 10901)
    We are using BO XI 3.1 SP2, Oracle 11g server on Linux.  Both oracle and bo server are on same machine.
    thanks in advance.

    Looks to me that you are using the 64bit oracle driver. Make sure to set your LD_LIBRARY_PATH variable (for th euser running the BO services) to point first to the directory with the 32bit libraries of the Oracle driver.
    Regards,
    Stratos

  • Error on Running Full Client Reports on Infoview

    Post Author: AmitP
    CA Forum: WebIntelligence Reporting
    I'm running WebI 6.x on a system with the following environment
    Microsoft Windows Server 2003 SP 1Business Objects 6.5 SP2Microsoft Internet Information Services (IIS) 6.0
    Whenever I try to run a fullclient(FC) report through Infoview, I see the following error 'A system error occurred. (Error: INF 00130) (65535)'
    I've checked the following -
    1)Login user is a local administrator access on the system.2)Login user has been given 6 privileges through the 'Local Security Policy'. (Act as part of the operating system,Access this computer from the network, Logon as a batch job etc.)3)Password for the Login User was changed some time back, but has been updated using the 'Update Service Parameters' option on the   Configuration Tool.4)'BusinessObjects.document' was updated by giving all privileges to the login user, and selecting 'This User', and adding   the credentials of the Login User on the 'Identity' tab.5)bomain.key has the same name in the 'locdata' folder in <INSTALL FOLDER> -> <nodes> -> <servername> -> <clustername>
    Is there any other check that needs to be done?Also, can I have a separate user for starting the BO WebI & Scheduler service?Where do I provide such an authentication?Kindly advice.
    Thanks,Amit.

    You are running on Windows 9x or Me, right? The darn OS has 300 or so bytes allocated for environment by default.
    Try setting the Initial environment to 4096 in the Properties|Memory tab for the batch file. That will get rid of "Out of environment space". The syntax error is another matter; Windows (except NT and derivatives) shells do not allow '=' in an environment variables value. You cannot overcome that. Some software (Sybase for instance) interprets # as = just because of that. Unfortunately, the JVM doesn't take such an approach.
    Better, grab copies of Unix utilities for Windows (www.gnu.org) including the wonderful shell 'bash' and write .sh scripts, which are inherently more powerful.

  • Scheduling Crystal report from Infoview portal doesn't show up data

    "The crystal report is based on a SAP BI query. The parameters of the report are basically the parameters(SAP variables) of the SAP BI query. When we run the crystal report in the CR Report Designer tool, it runs fine showing all the data correctly. Then we published the crystal report to the Crystal Enterprise Server from the SAP BI system. Through the Infoview portal, the user clicks on the 'Schedule' link for the report and sets the parameters. When the 'Schedule' button is clicked, it runs successfully but no data is seen in the report except for the template. But under the same report, in Infoview portal, if the user selects "View" link, sets the parameters and then clicks the 'Execute' button, it runs successfully showing all correct data.
    Dont understand why it works for 'View' link but doesn't work for 'Schedule' link. Is there any setting that needs to be made for this?"
    Thanks in advance,
    Sri

    Once you tick the schedule button the History window opens and you should see your instance. Status is usually pending and after a refersh (scheduled for run now) you should get the status running/successfull or failed. What is your status here and what happend if you tick on the instance once you get the status successfull?

  • Scheduling the report from Infoview portal does not show up data

    "The crystal report is based on a SAP BI query. The parameters of the report are basically the parameters(SAP variables) of the SAP BI query. When we run the crystal report in the CR Report Designer tool, it runs fine showing all the data correctly. Then we published the crystal report to the Crystal Enterprise Server from the SAP BI system. Through the Infoview portal, the user clicks on the 'Schedule' link for the report and sets the parameters. When the 'Schedule' button is clicked, it runs successfully but no data is seen in the report except for the template. But under the same report, in Infoview portal, if the user selects "View" link, sets the parameters and then clicks the 'Execute' button, it runs successfully showing all correct data.
    Dont understand why it works for 'View' link but doesn't work for 'Schedule' link. Is there any setting that needs to be made for this?"
    Thanks in advance,
    Sri

    Hi Sri,
    When we are able to see the report and unable to schedule the report with in the Info view, then check with the user rights.
    Just try to login with admin account and try to schedule the report.
    Also check the report in CMC and see the preview of the report.
    If the user doesn't have enough rights to schedule the report, then  it doesn't allow it.
    Also check with in the Folder rights with in the report is saved.
    Regards,
    Naveen.

  • Unable to run Store Procedure based deski report in Infoview

    Hi All,
    I have a Deski report which is created using Store Procedure. I am able to run report in Full Client Deski. But I am unable to run / schedule same report thorough infoview.
    More details about report
    - Report uses 3 store procedures. When I ran report in infovew I get error message as "SP2 Dataprovider did not refresh properly".  -- SP2 is Dataprovider name.
    - Same report I am able to run in Dev environment. After migration to Model, report fails to run in model infoview.
    - I am able to Run report only for 1st. When I refresh and run with same parameter report shows error.
    Any input will be great help.
    Thanks,
    NV

    Hi,
    Could you please test the following solutions to resolve the issue.
    Solution1:
    Test the issue by inserting the following parameter in .SBO file.
    <Parameter Name="Force SQLExecute">Always</Parameter> .
    Solution2
    Just put SET NOCOUNT OFF in the end of the stored procedure SQL.
    If the above doesnu2019t works then please try the following solution.
    Solution3
    Make the new connection from the scratch using ODBC connection and test the issue.
    I hope this will help you.
    Regards,
    Sarbhjeet Kaur

  • (Error RFC 00101) (Error: INF) Large DeskI reports in Infoview.

    Hi,
    I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
    Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
    I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
    Please advice.
    Regards,
    Hitesh

    Hi Hitestwar,
    Try these notes as well
    1363743 - '(DA0005)... no default driver specified state: IM002' and 'RFC 00101 Error INF' errors when refreshing a deskI report in InfoView
    1202263 - Error: "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
    1336210 - when refreshing Desktop Intelligence report in InfoView "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
    1423194 - "No Server was available to process the request. Please try again later. (Error: RFC 00101) (Error: INF)" when refreshing a DeskI document in InfoView
    1200315 - No server was available to process the request.Please try again later(Error:RFC 00101)(Error:INF)
    You can do another thing in the "Help & Support" section on the http://service.sap.com/support/ search for "Error RFC 00101" you will get more references to this issue.
    Or try to set logs on the server and check what is happening.
    Thanks,
    Vivek

  • Scheduling Report through InfoView - Destination Email

    My question pertains to InfoView in Crystal Report Server 2008.  I am trying to set up a scheduled report to run once, and be emailed as a pdf to my own email address.  I am using the administrator account and can successfully do this through the CMC, but when I try to schedule the report through InfoView, the destination always reverts back to the Inbox destination rather than the email destination.  The job has a successful status, but the destination is always the Inbox.
    I am fairly confident my job servers are set up with the proper SMTP information since I am successful when trying this through the CMC and I am setting everything the same through InfoView. 
    Any ideas?

    Hello,
    This is Crystal Report Server 2008 and I guess Business Objects Enterprise 3.0.  
    When scheduling a report through InfoView I do the following:
    Recurrence - Now
    Format - I choose PDF, although it doesn't really matter for the problem I am having.  
    Destination - I choose email from the dropdown, there is no checkbox to ignore the defaults.  I have to input my own information.  I populate the From, To, and Subject boxes.  I also choose to have an attachment sent.  
    I click the Schedule button and I am taken to the History window.  The job has a status of Running.  I choose refresh and the job completes with a status of Success.  However, when I click the status and the Instance Details are shown, the external destination line reads as Inbox and no email is delivered.  The report is delivered to the InfoView user's inbox, but not in an email as I selected.  
    This process works when performed through the CMC, but not through InfoView.
    Edited by: vtrujillo on Oct 8, 2009 5:13 PM

  • Failed to open connection when opening report in InfoView

    We get the following error when trying to open any report in InfoView.  This is only happening after our database server changed, but the ODBC connections appear correct.  Can anyone help with this?

    Hi Amos,
    First of all, check that your ODBC is working.  Do this thorugh ControlPanel->Administrative Tools->DataSources.  If this is working then good.
    If the connection test is successful, update your conneciton theough "Set DataSource Location" under the Databadse menu in Crystal Repoorts.

  • Creating reports in infoview

    Hello! Forums,
                       Can anyone please tell me how to format the crystal reports in InfoView. My report is displayed in crystal report viewer. I cannot see the formatting options like drill, formulas, etc.in this viewer. I tried to set the viewer in preferences section of infoview which gave 3 options 1) web 2)web activeX 3) web java but then also I did not get the options to format or drill or formulas in my cr viewer. Is it anything related to license issue? Please suggest me some references to learn preparing reports in BOE 3.1 step by step.
    Thank You.
    Regards,
    Grace

    For CR reports you need the CR Designer 2008 V1
    For WebI reports you can do that directly in the InfoView or by using the Web Intelligence Rich CLient XI 3.1 (is part of the BOE CLient tools XI 3.1).
    You can look at the documentation found here: http://help.sap.com
    Navigate to SAP BusinessObjects->All products and select either Web Intelligence XI 3.1 SP3 or Crystal Reports 2008 V1
    Regards,
    Stratos

  • Crystal Report Server - InfoView question

    Hi . I have a question on the Crystal Report Server. I want to send the output ( excel file ) from a crystal report in Infoview. I tried to click the 'Send To' button, but it only sends out the .rpt file. Please help...

    Hi,
    If you schedule the report you will have output file options for Excel, PDF, Word...
    You should probably have  an Export option on your viewer as well - Excel should appear in this. (You need to have permissions to see this)
    Regards
    Alan
    PS: This should be posted to the BO General or Crystal Reports forums.

  • Error while scheduling DESKI report in infoview

    I m scheduling a DESKI report to users enterprise inbox from infoview using a server group. This server group has DesktopIntelligence Job server, Destination Job server, Adaptive Job server and Program Job servers and all these servers are running.
    When I schedule the report to boldusers enterprise inboxbold it get failed and shows this error message
    bolddestination DLL disabled. []: [CrystalEnterprise.Smtp] bold
    I m wondering what has to be enabled for scheduling a report to infoview's own inbox.

    Abhilash
    You are correct that it shows all the prompts but only when we run the report either directly from the CR Designer or via View on Demand in Infoview/CMC.
    But if I try to schedule an instance of this report, I am getting a check box in the parameter section which says "Show unused parameters" to see this dyanamic prompt. And When I check that box in Infoview still I am not able to select any value for this prompt as it's greyed out.
    Hope I am able to explain my query to you.
    Also attached a screen shot of the scenario for your reference.

Maybe you are looking for