Setting personalization via profile parameter in the business role vs su01 personalization

We are trying to have the personalization for a user on login determined by the business role they choose (if they have more than one) via the profile parameter in the business role.
Setting the personalization this way doesn't seem to get picked up for the user, any experience with this issue?
Regards,
Curtis Finchercr

Hi Curtis,
In CRM, users can personalize their screens by logging in to web client by selecting the business roles.
Once they are in to the business role they can able to see "Personalize" option on right hand side top corner. If they click that option they can able to modify their own data (personal information), Lay out, Settings, Groupware integration and Favorites modifications as well.
Thanks,
Siva

Similar Messages

Table that stores the business role and user id mapping

Hi,
i want to know the table that stores the Business role and the business role and user id mapping in CRM system.
Thanks in Advance.
Regards,
Pricy

Hi Mary,
There is no direct table but there is a way to find it.
HRP1263 is the table where business roles are stored when maintained at org level. These are stored against the Position.
For getting user ID and position linkage refer table HRP1001.
In HRP1001 table use below criteria to get the User and Position.
OTYPE = CP
SCLAS = US
SOBID = User ID
ENDDA = 31.12.9999
Get the OBJID
Query the HRP1001 table again with following
OTYPE = CP
OBJID = OBJID from above Query
ENDDA = 31.12.9999
SCLAS = S
SOBID = Thats Position.
Pass the position to HRP1263 as below.
OTYPE = S
OBJID = POSITION
PROFILE - Thats business role assigned for the given position and user.
Hope this is helpful.
Regards,
Naresh

Enable personalization option in masthead for the custom role

enable personalization option in masthead for the custom role for end user without using eu_role or admin roles

Hi,
To do so, go to
Content Administration->Portal Content->Content provided by SAP->End User Content->Standard Portal users->Worksets->Portal Personalization
Copy this portal personalization workset to a folder and add it to the role which the user has. The user with this role will be able to see the personalization link in the masthead iview.
Regards
Srinivasan T

Read the business role in the code

Hi Gurus,
My Requirement is to diffrenciate codes based on business role. More like below pseudo code
if BRole1.
    code 1 will be executed
elseif BRole2
   code 2 will be executed
else.
   code 3 will be executed
endif.
Can you please let me know how to read the business role programatically in SAP CRM.
Appreciate your help
Regards
Sudipto

Hi Sudipto,
Try to check here:
Business Role of logged in user
Kind regards,
Garcia

Can I manually access, and set-up, a profile outside of the browser?

I set up a proxy in the browser using an address from a proxy list website and right after I did that it crashed every time I tried to open the browser. I searched on Chrome, trying to find a way to manually access my settings outside of the browser since I couldn't even get in to the browser, and I was directed to my profile. No website said how to alter the settings but they did say my settings were contained in the profiles. I thought to myself, "Since all my settings are in that profile, deleting it and reinstalling Firefox should fix it." It unfortunately didn't and now I have absolutely no way to make a new profile and every time I try to open Firefox it says I have an instance of the application running already.

Hi,
Please try '''firefox -p -no-remote''' in the '''Start''' > '''Run''' box (or press windows key + '''R''' if the Run box is not present), delete all the profiles with the files in it and create a new one. Please also see [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files] and [https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information?s=backup&r=1&as=s Backup.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing video in Firefox without a plugin]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]

Email profile in business role

Hi experts,
How can I find out if there is any email profile existing in the business role of the user?
Is there any FM for this?
Thanks,
Mohit.

Hi Mohit,
You can always query table CRMC_UI_PROF_A for that.
Kind regards,
Garcia

Business Role assignment now working as Expected

Hi All,
We have a User A, B and C , all these users have Business Role X, when these users were logging in they were gettings screens as per the configuration.
However now all of sudden Only User A ,though still has same Business Role X , is getting different Work centers,Logical links Mostly standard(Claim management, worklist, calendar,Email Inbox) .
User B and C who have the same business role are getting correct UI screens.
We are unable to find what went wrong all of sudden.
Thanks in advance for your suggestions
Regards,
Chandu.

Chandu,
If the CRM_UI_PROFILE is set to some UI Profile, this takes more priority(than the UI Profile assigned to the Business Role)
and shows the Navigation Bar and Work Centre configured for this UI Profile.
The normal Business Role configs wont work at that time.
Remove this entry and see, it will solve the issue.
Regards,
Masood Imrani S.

Creation of Business role without allow user the possibility of personaliz.

Hi
I'm new in SAP. and I'm in need. Is it possible create Business Role (in CRM) without the possibility (for the user) to personalize the assignment block and the general setting?
Thanks for your future help!
Stefano

Hi,
this is possible by assigning the Function Profile 'PERSONALIZATION' with value 'ALL_DISABLED' to your business Role in the Business Role Customizing.
Kind regards,
Carl

Setting Profile Parameter in Mini SAP

Dear experts,
Is it possible to set / edit a profile parameter in Mini SAP?
I opened transaction RZ10. When I pressed F4 on the 'Profile' field, I received a message saying 'No profile found'. I'm using SAP Netweaver 2004s ABAP Trial Version 7.00.
Thanks in advance.
Regards,
Haris

Hi,
My names eyup. İm from turkey.
İm not good english. İm sorry.
İ began to learn the new abap.but im minisap not installation.
Can I help me .please.
best regards
Edited by: eyupcan on Jul 28, 2011 8:55 AM

Render html in the Business Data web part (used for the BCS profile page)

I am searching and indexing a webservice and pulling in external content, through SharePoint's BCS. I have used SharePoint Designer to make the connection and its a read only connection, we are not trying to write back to the external data source. The problem
I have is that some of the columns are rendering the HTML as a string, with all of the HTML tags. For example, a column will render like this:
<p> Onboarding, Recruiting &amp; Talent Acquisition general information</p>
The profile page uses the business data web part and will accept custom XSL and I have modified the column that is rendering the html from:
<xsl:value-of select="@u_cause" />
to
<xsl:value-of disable-output-escaping="yes" select="@u_cause" />
The problem is that it does not make a difference the column will still render the HTML. Is there any other way to make the column render HTML?
Joe Garcia

Hi,
According to your description, my understanding is that you want to render column value as the HTML format in the xslt list view.
I suggest you can set the “disable-output-escaping” attribute like below, it will render as html:
<xsl:value-of select="@MyColumn" disable-output-escaping="yes"/>
Here are some detailed articles for your reference:
http://sharepoint.stackexchange.com/questions/16089/unescape-html-from-list-column
http://doitwithsharepoint.blogspot.com/2011/06/sharepoint-list-forms-display-html.html
Thanks
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jerry Guo
TechNet Community Support

Call logical links with different enhancement sets on the same business role

Hello,
I am trying to create a business role that contain logical links with different enhancements. I know how to choose an enhancement for the business role but I can't find a way, if possible, that one business role does it.
I know how to give an option to choose different roles for the same user, i'm looking for a way to do this in the same window
Thanks,
Noa

does not matter anymore

Business Role, Technical Profile, Application, Start Page in UI for service

Hi CRM 2007 gurus,
I have made all the settings in accordance with C04 to use the UI for the services role (copy of business role SERVICEPRO). Created the relevant PFCG role and a position in the org model; with a user and the business role assigned to the position. But I am getting an empty page on login.
Then I changed the technical profile from DEFAULT to DEFAULT_IC; then it started giving an error "Permission denied".
I then changed the start application to CRM_UI_FRAME and the start page to DEFAULT.HTM; then Internet Explorer started exiting on its own after the login.
Can someone pls tell me what is amiss. Do I need to include some specific application and page as the "Startup Application" and "Start Page" in the technical profile (these are currently blank for the technical profile DEFAULT attached to the concerned business role).
Points to be won; kindly help asap.
Regards,
DP

Hi Deepak,
few cents that might help:
- Your problem is definitely not related to authorization issues. (easily derived by the nature of the error message and the point where it occurs (CL_BSP_WD_STREAM_LOADER))
- The error message you received is being raised when CRM UI runtime tries to load a runtime repository. In case a runtime repository of a component has dynamic parts (e.g. the shell part itself), the repository is being loaded by the system via HTTP or HTTPS, depending on system settings. This results in the system sending a HTTP(S) request to itself.
Now, there are two likely reasons for this going wrong:
a) the system cannot "see" itself on the network (hosts problem, reverse proxy sceanrios, etc.)
b) the runtime repository doesn't exist at all (ressource doesn't exist). This sometimes happens if component enhancements are active in a client (customizing settings) but the respective enhancement component (development objects) haven't made it into the system.
c) In your case we can rule out this one: the SICF service for the UI component is not active - in that case the response would likely have been something like "Access forbidden" and you confirmed already all SICF services being active
To get more clarity, you might want to proceed as follows:
- Set a breakpoint in the line mentioned in the error message. You can access the source code of the releavant method using SE38 even though the include name looks pretty scary in the message (CL_BSP_WD_STREAM_LOADER=======CM02 or so).
- In the debugger, check the name of the URL that had been tried to access (The variable should be available some lines above the breakpoint where the request gets sent).
- try to access the same URL directly from your browser.
Now, if you still don't get a valid response, b) might be the case. If you get an XML file back, a) might be the case.
Good luck!
Peter

Provide authenticated username as parameter to a business service in OSB 12c

Dear OSB/OSB experts,
I have the following issue:
1. I have a web service that would accept username as a parameter in the SOAP request in order to do some internal authorization checks (filtering database rows, tables, etc.)
2. I want to connect that web service as business service in OSB 12c
3. The proxy service should NOT accept username as parameter
4. The proxy service should be protected via OWSM policy for authentication (either against the WLS authentication providers or through SAML tokens validation)
Based on the above is there any mechanism in the implementation of the proxy service to get the authenticated username from the security context and provide it as a parameter to the business service?
The authentication policy could use SAML tokens between two WLS domains - one will be running the WLS where proxy service clients will be running and the other - for the SOA 12c.
Many thanks in advance,
Anatoli

HI,
u can use Conditional Branching
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1061670
Split join would be used in case u need to split your request and call your Business Service in Serial/parallel & then gather resposnes from multiple callouts to have single response
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/splitjoin.html#wp1137258
Abhinav

Profile parameter for passwords - conflicting documentations.

Greetings!
I've encountered an issue with profile parameter login/password_max_idle_productive
Integrated help in SU01 says:
You can use the profile parameter login/password_max_idle_productive to define the point as of which the validity of the productive password ends. The time is calculated from the date of the last password change plus the number of days specified in the profile parameter. Password-based logon is then not possible from this point.
This makes this parameter redundant (we have login/password_expiration_time ).
SAP Library says (see link below):
Specifies the maximum period for which a productive password (a password chosen by the user) remains valid if it is not used.
Which suggests that the time after which passwords are considered expired is calculated from last logon date plus whatever is the parameter value.
SU01 help specifies explicitly how this parameter works but it conflicts with a more ambiguous description found in the SAP Library. The observed system behavior on logon is in line with SU01 help, but report RSUSR200 does not list the user as having an expired productive password.
We're on ECC 6.0, release 701 with support package 3. I could not find any SAP notes relating to this issue.
Has anyone encountered this issue before or have I just run into an odd glitch?
[SAP Library|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/22/41c43ac23cef2fe10000000a114084/frameset.htm]

It sounds like you have a requirement to set the expiration time (when the user has to change the password) which is for a different user group than those for which you want to disable an idle password. Currently, both are global settings and affect both user groups (actually, all users of type DIALOG and COMMUNICATION - only SERVICE and SYSTEM type users are not affected).
In that there is an option for you... but be aware of license implications... or you can upgrade to 7.02 early next year (I think this is the correct release, time and release "alias" for it..) and then the config your security policies client dependently!
Currently, your best option is to not set these two global parameters illogically and monitor the user group manually from RSUSR200.
In the wild, many folks use the user type difference to workaround this, but that is also global to the user type so they are excepted from the expiration time as well. Additionally, not all functionality is available to them on the client side (e.g. SAP Logon Tickets won't work) and the authority-checks are even slightly different on some special cases.
Personally, I don't understand why users with authorizations to make purchase requests only should change their passwords more often (expiration time) or be more active (idle time) than those with SAP_ALL etc.
> I hadn't considered SSO since we do not currently use it.
SSO solves several of these problems by deleting the password completely...
Cheers,
Julius
Edited by: Julius Bussche on Oct 8, 2009 9:59 PM

Change in profile parameter

Hi,
we have ECC 6.0 in unix environment.
In production system we have cluster environment, we have DB+CL, Application 1 & Application 2.
Now we are getting the pagging issue so we want to change the instance parameter. i want to know that
if i am changing instance parameter, should i reset the parameter in DB+CL & all two application system?
please help out us.
Thanks & Regards,
Gawas.

on which server you have paging issue? is this on CI or any application server?
what OS you are using?
and what's the em/initial_size is set in instance profile for all the servers. what the PHYSMEM_SIZE you are using.
and can you send the trace file logs also.

Setting personalization via profile parameter in the business role vs su01 personalization

Similar Messages

Maybe you are looking for