Setting priority of an job

What is the way you can set a job to run first. We are using DBMS_job but can use the scheduler....But can not find a way to priority a job stream....

What is the way you can set a job to run first. We are using DBMS_job but can use the scheduler....But can not find a way to priority a job stream....
Re: JOB_PRIORITY attribute is not honored
Resource Manager is another option. you need to setup a resource consumer group and the job class pointing to it and a resource plan that reserves CPU for the group.
There are lot of discussions available in Scheduler Scheduler
HTH
-Anantha

Similar Messages

E2000 setting priority is not working for one PC

my home has a max download speed of 300 KB/s. which can make gaming quite an issue if someone in the house starts using something that is a bit of a drain on the bandwidth.
i fixed the issue for a few months by setting the gaming console to be the only device with high priority. but for some reason my sisters hp laptop still drains all the bandwidth shen he loads youtube. and the only way to stop it is a mac address block on that computer so the game isnt literally frozen still.
i need to figure out how to get the priority working against this device.

In this section, you can set the bandwidth priority for a variety of applications and devices. There are four levels priority: High, Medium, Normal, or Low. When you set priority, do not set all applications to High, because this will defeat the purpose of allocating the available bandwidth. If you want to select below normal bandwidth, select Low. Depending on the application, a few attempts may be needed to set the appropriate bandwidth priority.
To Enable QoS service on your router you can follow this link and follow the steps on the website: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=05ef4bac579a47d39d9454a4b0583cbf_1701.xml&pid=80&r...
Second, let me know the current firmware version in the router management page: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=df680dece5cd4f7ea8141ea0026db71a_4046.xml&pid=80&r...

How to set maximum number of jobs in oracle

Could pls tell explain me about how to set maximum number of jobs in oracle....
Regd,
Mahi

I don't think there is any limit on number of jobs that can be submitted to Oracle. However, there is a limit on the number of processes that would execute those jobs (governed by JOB_QUEUE_PROCESSES).
Message was edited by:
Satish Kandi
Typo corrected.

IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.

I am trying to modify the value of the field "Job Code" through API I am getting the following error.(OIM11gr2). I do not get this error when updating the other fields. There is a field by the name USR_JOB_CODE in the database. When I poked around I found that there is no Job Code field in the User Form. Any ideas?
IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
oracle.iam.identity.exception.ValidationFailedException: IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
       at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
       at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
       at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
       at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_1036_WLStub.modifyx(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
       at java.lang.reflect.Method.invoke(Unknown Source)
       at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
       at $Proxy2.modifyx(Unknown Source)
       at oracle.iam.identity.usermgmt.api.UserManagerDelegate.modify(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke

THanks for your reply. Here is the snippet from User.xml that contains info about job code.
<entity-attribute>Job Code</entity-attribute>
<target-field>usr_job_code</target-field>
<field name="usr_job_code">
<type>string</type>
<required>false</required>
</field>
<attribute name="Job Code">
<type>string</type>
<required>false</required>
<searchable>true</searchable>
<multi-valued>false</multi-valued>
<MLS>false</MLS>
<multi-represented>false</multi-represented>
<attribute-group>Basic</attribute-group>
<metadata-attachment>
<metadata>
<name>multi-valued</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>user-searchable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>category</name>
<value>Preferences</value>
<category>properties</category>
</metadata>
<metadata>
<name>bulk-updatable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>read-only</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>visible</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>encryption</name>
<value>CLEAR</value>
<category>properties</category>
</metadata>
<metadata>
<name>display-type</name>
<value>TEXT</value>
<category>properties</category>
</metadata>
<metadata>
<name>system-controlled</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>max-size</name>
<value>512</value>
<category>properties</category>
</metadata>
<metadata>
<name>custom</name>
<value>false</value>
<category>properties</category>
</metadata>
</metadata-attachment>
</attribute>
I am able to retrieve the value of the Job Code attribute without any problem with the following code.
System.out.println("JOB Code: "+user.getAttribute("Job Code"));

How to set priority?

Hello,
Is there a way to set a priority symbol or number or anything of the sort beside a message in mail?
I heard of it being done but I'm not sure.
Also, how do I use mail and create an out of office reply or an email that will be automatically sent when someone sends an email to a given address?
Thanks.
Dorian

You mean when sending a mail, how do you set priority? Is there a little rectangular box in the lower left-hand corner region of the message header area in your new message window composition window, that has three little horizontal lines and a downward pointing triangle in it? Click on it and select Customize....
Check the far-right checkbox that has a pull-down menu with a "!" in it. That is message priority. "!!" means high priority, "!" means regular priority, and "-" means low priority.
Or do you mean how do you display the priority of incoming mail? You can display priority of incoming messages by enabling the "Flag" column in your message list viewer pane. In the Mail's menubar, go to Mail > View > Columns and select Flags. You can drag that column to the desired position (mine is 2nd from left) and adjust its width in the column title row using your mouse. If you have placed the Flag icon in the toolbar of the main mail viewer window, then when you click on the icon, you can locally "flag" it (displays a little red flag in that column next to the message) to remind you that you have to do something with/about this message. To add the Flag button to your toolbar, in Mail's menubar, click on Mail > View > Customize Toolbar and drag the Flag icon into your toolbar.
The best way I would know to create an out-of-office reply would be to create a temporary rule that says "if account is 'whatever' then reply" and enter text in the reply text window. Problem is, I don't know whether the rule would be executed until after the message was downloaded in your running mail application, or until the message was actually viewed. You'd have to experiment. If your computer is going to be shutdown or you will be logged out, that won't work, and you'd really need to be able to do something at the mail server level, not your mail client level.
(if you find that this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the "helpful" or "solved" buttons in the header of this post)

How can I set priority on an individual email in my inbox?

I have the Priority column open in Thunderbird, but I can't set the priority. How can I do this?

'Tools' > 'Message filters'
* click on 'New'
* give filter a name
Apply filter filter when:
* select: 'Manually Run'
* Select: 'Getting new mail'
if you want to check for and remove junk first.
* select: 'filter after junk classification',
If there is only one condition or if you want to use more conditions that say 'A' AND 'B' must occur.
* select 'Match all of the following'
If there is more than one condition or if you want to use two more conditions that say 'A' OR 'B' must occur.
* select 'Match any of the following'
you will need to work out what condition(s) need to be met, such as:
example:
'FROM' and 'IS' and 'email address'
to set another condition click on the small +
Perform this action:
'Set Priority to' and 'Highest'
* click on OK to save the filter.
* make sure it is enabled.
Message filters run in the order listed. So you need to make sure that you do not have another filter positioned above that filter which could filter emails before the second filter can work.

Setting Priority Dynamically in Decision Step

Hi Experts,
My requirement is to set priority of the user decision based on a container element value.
Depending on the container element values, some times the workitem should be created with priority 5 (medium) and some times it should get created with priority 4 (High).
Please let me know how can we pass priority dynamically to the user decision step.
Thanks in Advance,
Siva Sankar.

I think you can use FM
SWW_WI_PRIORITY_CHANGE
Thanks
Arghadip

Set the custom timer job that copy the data in the same list

Hi
How to set the custom timer job that copy the data in the same list
Thanks,

hello
please it is wrong to copy all of the list3 item in list1 as the example as below is a copy of one item.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.SharePoint;
//This namespace is used for the SPJobDefinition class
using Microsoft.SharePoint.Administration;
namespace GENERAL_CustomTimerJob
//To create a custom timer job, first add a class to your SharePoint project and
//inherit from SPJobDefinition. Implement the constructors and override the Execute
//method as shown below. To install your timer job, and set the schedule, you must
//add a Feature and a Feature receiver.
class GENERAL_CustomTimerJob :
SPJobDefinition
#region Constructors
//You must implement all three constructors
public GENERAL_CustomTimerJob()
base()
public GENERAL_CustomTimerJob(string jobName,
SPService service,
SPServer server, SPJobLockType targetType)
base(jobName, service, server, targetType)
public GENERAL_CustomTimerJob(string jobName,
SPWebApplication webApplication)
base(jobName, webApplication,
null, SPJobLockType.ContentDatabase)
//Set the title of the job, which will be shown in the Central Admin UI
this.Title = "Simple Example Timer Job";
#endregion
//Override the Execute method to run code.
public override
void Execute(Guid targetInstanceId)
//Get the Web Application in which this Timer Job runs
SPWebApplication webApp =
this.Parent as
SPWebApplication;
//Get the site collection
SPSiteCollection timerSiteCollection = webApp.ContentDatabases[targetInstanceId].Sites;
//Get the Announcements list in the RootWeb of each SPSite
SPList timerJobList =
null;
foreach (SPSite site
in timerSiteCollection)
                timerJobList = site.RootWeb.Lists.TryGetList("List3");
if (timerJobList != null)
string sourceUrl = "http://aydi-pc";
string destinationUrl =
"http://aydi-pc/sites/Site1/";
string sourceList = "List3";
string destinationList =
"List1";
using (SPSite sourceSite =
new SPSite(sourceUrl))
using (SPWeb sourceWeb = sourceSite.OpenWeb())
using (SPSite destSite =
new SPSite(destinationUrl))
                                using
(SPWeb destWeb = destSite.OpenWeb())
SPList ObjSourcelist = sourceWeb.Lists.TryGetList(sourceList);
SPList ObjDestinationlist = destWeb.Lists.TryGetList(destinationList);
SPListItem newItem = ObjDestinationlist.Items.Add();
SPListItemCollection items = ObjSourcelist.Items;
                                    if
(items.Count > 0)
foreach (SPListItem item
in items)
newItem["Title"] = item["Title"];
newItem["Nom"] = item["Nom"];
newItem["Prenom"] = item["Prenom"];
newItem.Update();

UCCX 8.5.1 Scripting Assistance - Set Priority

Hello,
I am trying to configure the priority in my script similar to how they did this in the below discussion.
https://supportforums.cisco.com/discussion/11892936/uccx-851-basic-scripting-assistance-set-priority
When I put the "set priority" in the script it errors out and callers hear the message that the system is experiencing problems. The script runs fine without the "set priority". Any assistance would be greatly appreciated.

Chris,
I attempted to validate the script and did get an error with the "Set Enterprise Call Info" step. What's odd is that without the priority step the script still does not validate, but actually works fine. As soon as I add the priority step to it though it breaks.
I removed the "Set Enterprise Call Info" step and the priority works as expected now. Thank you for your assistance.
Jared

Setting priority to the RTP packets

Hi,
I am developing a system which will use multicasting to trnamist RTP packets. To ensure the better transmission, I want to set priority to my transmitting RTP packets. My system has been developed based on AVTransmit3 and AVReceive3 provided by sun where RTPManager has been used.
However is it possible to add special information to the RTP packets so that router underlying router will allow my packet to be transmitted first?
A repply is badly needed...................

Well......according to the RFC2474 and RFC2475, diffserv header can map with the precedence field of the IP header, In IP header TOS field can be mapped with DSCP field of the Diffserv Header. Now jcparques, though IP header can be diffserv capable but is their no router availble in reality which is diifserv capable?Or if I use any simulator like NS2 or other simulator which can work with java, can't I implement diffserv in rtp packet?

UCCX - set priority command CSQ

I am setting up a Que and the customer wants to have agents in group A answer all the calls.
If a call waits in que for over 5 minutes, they want a second group of agents (group b) to be able to take that call. So the call could goto the either group A or B.
My question is, Can I do this in one Que, or do I need two.
I was thinking that I could do a “set priority” of 5 when the call comes into the que and then after 5 minutes, set it to 1.

Hi Carlo
Priority probably won't help - all that does is move the call 'ahead' of other calls in the queue. It doesn't affect to 'who' the call is routed.
Basically if you want the system to make an instant decision (e.g. route to group of agents A, but if not busy send to agent group B) then you can give agent group A higher skills than B, and use the 'most skilled' routing algorhythm on a single queue.
If you need that 5 minute delay, then you need two queues, with the second queue added with a 'select' step in the 'queeud' branch of the first 'select' step.
Regards
Aaron

Setting priority for WL Triggers

Hi,
We are developing a huge application using WL 5.1 and JDK 1.2.2. We have 5-6
Weblogic Scheduled Triggers that are running at different time.
The rest of the application almost comes to halt or slows down when the
triggers are scheduled. Is there a way to set priority for the those
Triggers? Like can i say in weblogic that run triggers in low priority? If
so, how?
Thanks for the help in advance.
regards,
Prabhakar Babu

At the current time, no.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Prabhakar Babu" <[email protected]> wrote in message
news:39b7f8a8$[email protected]..
Hi,
We are developing a huge application using WL 5.1 and JDK 1.2.2. We have5-6
Weblogic Scheduled Triggers that are running at different time.
The rest of the application almost comes to halt or slows down when the
triggers are scheduled. Is there a way to set priority for the those
Triggers? Like can i say in weblogic that run triggers in low priority? If
so, how?
Thanks for the help in advance.
regards,
Prabhakar Babu

Set Priority

I have a script where the caller is given the option to press 2 to leave a mesage or press 0 to return to the main queue. What I am trying is to set this callers priority to 10 (highest) and send him to the main queue. The problem is when the caller is redirected to the main queue he goes back in the line. I think the priority is not working. Can some tell me how to do this correctly.
Thanks,
Solomon

Why are you doing a Call Redirect after increasing the priority? This should be a Goto label or something that keeps the caller within the queued branch of the script. If you really have to move to a different application/script you would need to build a session to map the contact's priority across.
I would eexpect it to look more like this:
Start
[IVR logic]
Select Resource
-Selected
-Queued
--Label: QUEUED_LOOP
--Menu
---Voicemail
----Dequeue
----Call Redirect
-----Successful
------Set Contact Info (Handled)
---Continue Holding
----Set Priority (10)
--Hold
--Delay
--Unhold
--Goto: QUEUED_LOOP
End

Setting priority in threads

What will happen if i set the priority of a thread after calling the start() on the thread.... also what will happen if i set priority before start() but in as a paramter int i pass 14 ???

Why don't you try it and see? I would guess that if you tried setting the priority after calling start() it would be just as if you had openned up the Task Manager (for Windows) and set the priority of a currently ready-state thread or process. As for a higher (or even a lower) setting than is allowed, Java either ignores it or (my guess) sets it to the max or min, respectively.

[Solved] Setting Up A Cron Job

I want to set up a cron job that will copy (update) my download folder that contains all my linux related stuff to the linux downloads folder contained in my windows downloads folder. I know how to set up crontab but vi(m) confuses me since it opens crontab as a temp file and I dont know what to call it when I try and save it. I tried using EDITOR=nano crontab -e but it still opens vim
heres the line I want to input into crontab:
0 3 * * * cp -Ru /home/bran/downloads/* "/media/mybook/Downloads/Linux Downloads/"
Last edited by brando56894 (2009-05-05 23:12:05)

I tried adding the job to /etc/cron.daily but that didnt seem to have any effect on anything, ive been learning vim on and off for awhile now but its alot to learn and its completely different than anything else. I know the basic stuff (save, quit, quit!, startinsert) but thats about it. I think the best feature I love about it is the syntax highlighting since i usually use nano and it doesnt seem to work even when i tried to enable it in the config file.
brisbin33 wrote:
hey, that was my bad. i guess it's a preference that i incorrectly characterized as a best practice. too much bash scripting makes me aware of when things don't _need_ to be double quoted... doesn't mean they _shouldn't_ be double quoted.
getting into that habit of the down slash in front of spaces might come in handy though b/c you would know to also put it in front of symbols like $ and ? which wouldn't behave well inside double quotes. however, in your case, either way works just fine.
i'll trade that bit of bum advice for some good advice though: look into rsync, it works very similar to cp except it won't spend all that time/energy copying files that are already there. does my nightly backup (~205 GB) in less than 3 minutes.
oh, and don't forget to add [solved] if you get this all working.
haha its cool, i was actually thinking about using rsync originally but then i was looking up a guide for it and it seemed to complex to do something simple like I needed to do. my linux downloads folder is only about 400 or so mb and the u flag updates only changed files so it doesnt take that long anyway.

Setting priority of an job

Similar Messages

Maybe you are looking for