Setting required in XI components!

Hi,
are there any setting required initially before we start any development on XI,
I mean like do we need to do any setting using Tcode SXMB_ADM etc,not only this,are there any other Tcode in which settings have to be maintained.
Any settings for AE,IS,IE etc?any docs or links appreciated.
thank you.
regards,
Babu

Babu,
The question is very vague. Before starting XI development there are lot of settings to be done like:
post installation steps
configuring integration engine in sxmb_adm
creating SLD
creating technical and business systems
create SWC etc.
So if you do all this then it is wise to start the development. Also some settings are specific to release so please the installation and configuration guide from service market place.
Else you start doing development what ever the errors you are getting just debug them i.e, Reverse engineering.
If you have any issues please post back.
Regards,
---Satish

Similar Messages

Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Skill set requirements for SAP E-Sourcing and CLM

Dear All,
We are about to implement SAP-E-Sourcing 5.1 and CLM 2.0 (on Netweaver Platform). What are the skill sets required to support and do enhancement and customization to this solution?.
Thanks in advance.
regds
velu

Hi Velu -
E-Sourcing technical consultants will require SQL skills if you are developing custom reports. The E-Sourcing query and reporting tools utilize "annotated" SQL statements the result in a SQL query being executed against the relational database. It is also useful for the report developer to have skills specific to the DBMS being used (for example, Oracle skills) - often times, using DBMS specific SQL constructs can provide improved reporting.
E-Sourcing has a feature called "scripting" that allows custom business logic to be included in the application and executed at various "call-out" points. The scripting feature provided by E-Sourcing uses a technology called BeanShell (see www.beanshell.org for more details on this technology). Beanshell development really requires strong programming skills using Java, although some components of BeanShell may be more like JavaScript. Regardless, I recommend Java expertise for writing E-Sourcing scripts. Knowledge of HTML is not required.
The E-Sourcing workflow capabilities also utilize BeanShell, so if you plan to implement any workflows, you will also require such technical skills.
Many other features of E-Sourcing such as user interface customization can be done with less technical individuals. Programming is not required.
Hope this is helpful.
Regards,
Rob

I need to set the position of components on a page that contains a MenuBar,

I need to set the position of components on a page that contains a MenuBar, but MenuBar does not provide a getPreferred size method.
How can I get the MenuBar's size in AWT?
Thanks.

A menubar is not a general component that is added to a frame like any another. It is the specific responsibility of the setMenuBar/setJMenuBar methods to deal with this.

What is setting required for Price Contol do the optional entery in master.

Hi SAP EXPERT,
What is setting required for Price Contol do the optional entery in Material master ?
Regards
Mahendra
Edited by: MAHENDRA NAVALE on Aug 27, 2011 2:23 PM

HI
In general in the material master record you can, hide display or optional for a field, but there are certain feilds should be mandatory for material creation,like base unit of measure,material description,and price contro,l valuation price,valuation class,without this you cannot create a purchase order.
If you dont want to the price control means go for mateial type non valuated material NLAG. because the price control is mainly linked with the material valuation. based on the the price control the price difference will post either sock account or price difference account.
Goto>MM>LOGISTICS GENERAL>MATERIAL MASTER>FEILD SELECTION >ASSIGN FEILD SELECTION TO FEILD SELECTIN GROUPS(OMSR) >CHECK YOUR FEILD REFERENCE FOR PRICE CONTROL (MBEW-VPRSV) FEILD REFERNCE GROUP IS 32* > AND GOTO MAINTAIN FEILD REFERENCE FOR DATA SCREENS (OMS9) >ENTER YOUR FEILD SELECTIN GROUP 32 (PRICE CONTROL )AND CHOOSE MM01 MAKE IT FROM REQUIRED TO OPTIONAL.
Thanks
Edited by: Nijamudeen**MM on Aug 29, 2011 10:19 AM

What the setting required in vendor master for Intercompany or intracompany

What the setting required in vendor master for Intercompany or intracompany orders
Thanks,
Kiran

Hi,
For the inter company STO scenario
Create a vendor for the company code of receiving plant, using account group :0007 Assign this vendor to Delivering plant
in the Purchasing view>Extras>Add. Purchasing data>Plant.
Also create an internal customer for the supplying sales area and assign it to the vendor, it helps in determining the Shipping point.

What is setting required In Middle ware?

What is setting required In Middle ware?

HI
In general in the material master record you can, hide display or optional for a field, but there are certain feilds should be mandatory for material creation,like base unit of measure,material description,and price contro,l valuation price,valuation class,without this you cannot create a purchase order.
If you dont want to the price control means go for mateial type non valuated material NLAG. because the price control is mainly linked with the material valuation. based on the the price control the price difference will post either sock account or price difference account.
Goto>MM>LOGISTICS GENERAL>MATERIAL MASTER>FEILD SELECTION >ASSIGN FEILD SELECTION TO FEILD SELECTIN GROUPS(OMSR) >CHECK YOUR FEILD REFERENCE FOR PRICE CONTROL (MBEW-VPRSV) FEILD REFERNCE GROUP IS 32* > AND GOTO MAINTAIN FEILD REFERENCE FOR DATA SCREENS (OMS9) >ENTER YOUR FEILD SELECTIN GROUP 32 (PRICE CONTROL )AND CHOOSE MM01 MAKE IT FROM REQUIRED TO OPTIONAL.
Thanks
Edited by: Nijamudeen**MM on Aug 29, 2011 10:19 AM

Setting required to create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system

Dear Experts,
Can you please suggest me list of activities require to automatically create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system .
i.e If I create the customer master record and transfer the same CMR to SAP GTS , what are the setting requires to maintain in SAP GTS sytem to automatically create the Business partner .
Ram

Hi Raghu,
Below are the main settings required to enable you to transfer Customer Master Data to SAP GTS. Please note that their is a difference between, Customer Master Record and Customer Master Data in terms of data and for GTS, we transfer Customer Master Data. Hence, below are the settings required:-
In SAP ECC system:-
Activate the change pointers for Customer Master Data apart from enabling basic connection settings.
Schedule a job to run at regular intervals to transfer all the customer master data for the available change pointers to the SAP GTS system
2. In SAP GTS system:-
Maintain the Mapping for ECC Customers to SAP GTS Business Partners in the General settings area of the SPRO in SAP GTS system
Ensure that the Number range is maintained for those GTS Business Partners.
Also, some time you may be required to maintain the organisational structure to ensure full working.
I hope this will be helpful to you.
Regards,
Aman

Skill sets required for interfacing with third party

Hi we are currently using LSO 603 , and we are scrom compliant , we want to build an interface with third party , where we have all our manufacturing courses stored . so client wanted to know the skills sets required for building an interface. please advise
Thanks!

Skills required.....
ABAP including BAPI's/Function Modules
understanding of Performance management and how it hangs together.
Happy New Year.
Jules.

Setting required property on pre-update trigger

i have set required property of 3 items on pre-update trigger of a block such that if user updates a listbox and if the updated value is 'P' for perentage then the user must fill all the 3 fields but even after setting the required property the record is saved if the fields are empty. the trigger is firing & everything looks ok. the portion of code i've used is:
BEGIN
IF :ROUTING_ENGINE_RULES.DISTRIBUTION_TYPE = 'P' THEN
PAUSE; /*TO CHECK ENTRY ON TRIGGER*/
SET_ITEM_PROPERTY('carrier_cd_percent1',UPDATE_ALLOWED,PROPERTY_true);
('carrier_cd3_percent',UPDATE_ALLOWED,PROPERTY_true);
I'VE SET OTHER 2 FIELDS SIMILARLY

put your code in when-listvalue-changed trigger for that 'P' trigger.
to put it in existng place is still too late.

FRM-41390: Cannot set REQUIRED property of subordinate mirror item

hi,
this is sathish,
i have customized the oracle apps shipping transaction form, in this form i am calling the 10g report every thing is working fine but,when i open the form at that time it is showing the ERROR "FRM-41390: Cannot set REQUIRED property of subordinate mirror item"
can any one suggest me how to slove this.
tahnks,

The first question is do you know what the error message means?
It seems to be saying that you have a mirrored item, ie a field that it set to mirror the value of another. The error seems to indicate that it is not happy for this mirror item to have the required property set.
If you know this already, then sorry for the explanation, but you did not make it clear in the post.
I suggest to search for mirror items and see what properties they have, also see if you have a set_item property on said item that makes it required. I'm not sure from your description whether this happens at startup or after some event in the form.
rgds

OATS CPU does not support the SSE2 instruction set required to run JRockit

Hello,
I am trying to get the OATS agents to work on some injector machines, however, when I try to start them I get the following error:
"[ERROR] Your CPU does not support the SSE2 instruction set required to run JRockit.
Could not create the Java Virtual Machine."
Is there a way to configure OATs to use the Sun JDK instead? I have the Sun JDK in my path and JAVA_HOME set accordingly, however that doesn't seem to make a difference. Alternatively, is there a workaround to this problem?
Thanks,
Michael.

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Set required status for all subtypes first error

Hello,
While implementing OSS note 1744002 for Application Control Workflow i had the following error.
In fact, i added a new attribute for BOR bus2201.
When i wanted to change the status to implemented, i got the following error 'Set required status for all subtypes first'.
Thanks,
Meriem.

Hi Meriem,
Any new attribute should be added to the newly created custom SubType of the Object type BUS2201, but not Object BUS2201 itself.
Revert the BOR BUS2201 to its original state and add the new attribute to your z<subtype>. You will no more get the error.
Regards,
Kiran

Basic Setting required for running simple JMS class

please tell me all setting required for running JMS class.
I have installed IBM MQSeries.
Especially about how to lookup for Topic and TopicConnectionFactory and where should i specify.
it is very urgent please help me fast. Also send any files for doing setting to me at [email protected]

Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY," "); //put yor init. context
ht.put(Context.PROVIDER_URL, " "); //put your server url
ctx = new InitialContext(ht);
TopicConnectionFactory topicConnectionFactory = (TopicConnectionFactory) ctx.lookup(" "); // your connection factory
TopicConnection tcon = topicConnectionFactory.createTopicConnection();
TopicSession tsession = tcon.createTopicSession(false,Session.AUTO_ACKNOWLEDGE);
Topic topic = (Topic) ctx.lookup(" "); // This is your topic
TopicSender tsender = tsession.createSender(topic);
TextMessage message = tsession.createTextMessage();
message.setText("Topic Message");

What are the skill sets required for a PCR consultant?

what are the WebDynpro skill sets required from the PCR consultant.

Hi
Follow the previous reply further take some input from these threads
1.[PCR and Netweaver Developer Studio |PCR and Netweaver Developer Studio;
2.[PCR in Portal 6 |/message/126419#126419 [original link is broken];
Best Regards
Satish Kumar

Setting required in XI components!

Similar Messages

Maybe you are looking for