Setting required to process incomming Email with CSV file attached
Dear all,
We are having a scenario where in the supplier receives a PO confirmation CSV file from the download center as an Email attachment. The supplier updates the file by confirming PO's and replies back. The CSV file needs to update the confirmed PO's in SNC.
The SO50 settings are in place but still we are not able to receive the Email back in SNC. Any suggestion on what settings we need in SNC to receive and process the CSV file?
thanks,
mahehs
Hi,
You can use the upload center to process the changed data. Isnt that helpful?
Best Regards,
Harsha Gatt
Similar Messages
-
SOAP Axis sender with CSV file attachment
Hi Experts,
I have a requirement where I receive a CSV file attachment from a Web Service post ( i.e a SOAP sender with attachment). I decided to use SOAP with Servlet(Axis) protocol, since standard SOAP sender does not allow modules to be used.
I am able to test this interface through SOAPUI with attachment to the point where I can get the attachment payload as my main payload in IE, but it fails in mapping since CSV needs to be converted to XML. I have following queries for proceeding ahead with this scenario:
1. How do I convert the CSV attachment to XML inorder for mapping to be used in IE. Is there a standard axis handler available for this ???? Also where should this handler be called in the sequence of Axis modules ???
2. Can I use MessageTransformationBean for converting plain to XML ??? If yes where should this module be called in the sequence of Axis modules. I tried using this module between the CallSapAdapter and the first AdapterBean but it returns exception in SOAPUI saying " Messaging exception: No Main"
3. Is there a blog available which illustrates about using additional modules/handlers in Axis. I have had a look at the FAQ note of Axis but it just gives the overview.
Thanks.
Siddhesh S.TawateSolved :).
1 AF_Adapters/axis/HandlerBean Local Enterprise Bean xireq
2 AF_Adapters/axis/AFAdapterBean Local Enterprise Bean afreq
3 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean Plain2XML
4 CallSapAdapter Local Enterprise Bean sap
5 AF_Adapters/axis/AFAdapterBean Local Enterprise Bean afresp
6 AF_Adapters/axis/HandlerBean Local Enterprise Bean xires
Above sequence worked. I guess I was missing some parameter in content conversion earlier.
Thanks. -
Email with Text File Attachement as Source
Hi All,
One of my interfaces needs to listen to incoming mails with an text file attachements.I wish to know how we can convert the text file contents into XML to further process it on the reciever side.Hi,
To perform content conversion of a flat file, check these blogs,
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Also, to understand file content conversion better, you can check this link on SAP Help,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards,
Bhavesh -
How to use UTL_SMTP to send email with existing file attachment
Hello! I am trying to create a pl/sql procedure that lets me send an email and include an existing file to a email address. So far, I found information on how to send a file and create an attachment with information I put in the procedure. This is NOT what I'm trying to do. I'm trying to send an email and include an attachment for a file that already exists. I need the pre-existing file to be sent to the email recipient.
This is how far I've gotten, but this only allows me to CREATE an attachment with the information I put in it from the procedure. I got it from the following site:
http://www.orafaq.com/wiki/Send_mail_from_PL/SQL
DECLARE
v_From VARCHAR2(80) := '[email protected]';
v_Recipient VARCHAR2(80) := '[email protected]';
v_Subject VARCHAR2(80) := 'Weekly Invoice Report';
v_Mail_Host VARCHAR2(30) := 'mail.mycompany.com';
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'MIME-Version: 1.0'|| crlf || -- Use MIME mail standard
'Content-Type: multipart/mixed;'|| crlf ||
' boundary="-----SECBOUND"'|| crlf ||
crlf ||
'-------SECBOUND'|| crlf ||
'Content-Type: text/plain;'|| crlf ||
'Content-Transfer_Encoding: 7bit'|| crlf ||
crlf ||
'This is a test'|| crlf || -- Message body
'of the email attachment'|| crlf ||
crlf ||
'-------SECBOUND'|| crlf ||
'Content-Type: text/plain;'|| crlf ||
' name="ap_inv_supplier_cc10.txt"'|| crlf ||
'Content-Transfer_Encoding: 8bit'|| crlf ||
'Content-Disposition: attachment;'|| crlf ||
' filename="ap_inv_supplier_cc10.txt"'|| crlf ||
crlf ||
'TXT,file,attachment'|| crlf || -- Content of attachment (THIS IS MY PROBLEM! I NEED TO BE ABLE TO ATTACH AN EXISTING FILE, NOT CREATE A NEW ONE)
crlf ||
'-------SECBOUND--' -- End MIME mail
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;
/First, you must create a directory object
create directory ORALOAD as '/home/ldcgroup/ldccbc/'
/Study the Prerequisites in the link I posted above, or else you will not be able to read/write files from the above directory object
"fname" relates to the file name that you read from.
In the code below, it is also the name of the file that you are attaching.
Although they can be different!
l_Output is the contents of the file.
declare
vInHandle utl_file.file_type;
flen number;
bsize number;
ex boolean;
l_Output raw(32767);
fname varchar2(30) := 'ap_inv_supplier_cc10.txt';
vSender varchar2(30) := '[email protected]';
vRecip varchar2(30) := '[email protected]';
vSubj varchar2(50) := 'Weekly Invoice Report';
vAttach varchar2(50) := 'ap_inv_supplier_cc10.txt';
vMType varchar2(30) := 'text/plain; charset=us-ascii';
begin
utl_file.fgetattr('ORALOAD', fname, ex, flen, bsize);
vInHandle := utl_file.fopen('ORALOAD', fname, 'R');
utl_file.get_raw (vInHandle, l_Output);
utl_file.fclose(vInHandle);
utl_mail.send_attach_raw(sender => vSender
,recipients => vRecip
,subject => vsubj
,attachment => l_Output
,att_inline => false
,att_filename => fname);
end;
/ -
Hi,
I am using CRM ONLINE 2013.
How to automate below process?
1. On Approval Of Quotation, Run Report.
2. Generate PDF.
3. Send an Email With PDF as attachment.
As i have gone through many forums for this topic, but creating a plugin code for generating Report PDF is not possible in CRM ONLINE.
So, What is the alternate way to do this..?
Thanks.This is my entire code mentioned below:-
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
<script type="text/javascript">
if (typeof (SDK) == "undefined")
{ SDK = { __namespace: true }; }
SDK.JScriptRESTDataOperations = {
_context: function () {
if (typeof GetGlobalContext != "undefined")
{ return GetGlobalContext(); }
else {
if (typeof Xrm != "undefined") {
return Xrm.Page.context;
else { return new Error("Context is not available."); }
_getServerUrl: function () {
var serverUrl = this._context().getServerUrl()
if (serverUrl.match(/\/$/)) {
serverUrl = serverUrl.substring(0, serverUrl.length - 1);
return serverUrl;
_ODataPath: function () {
return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
_errorHandler: function (req) {
return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
_dateReviver: function (key, value) {
var a;
if (typeof value === 'string') {
a = /Date\(([-+]?\d+)\)/.exec(value);
if (a) {
return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
return value;
Create: function (object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 201) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Retrieve: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
Update: function (id, object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "MERGE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Delete: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "DELETE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
if (filter != null) {
filter = "?" + filter;
else { filter = ""; }
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set" + filter, true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
__namespace: true
</script>
<script type="text/javascript">
//Create Email and link it with Order as Regarding field
var Xrm;
var email = new Object();
var ownerID = "";
var CustomerId = "";
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
//Get ownerid who send email of quotation to customer
function GetOwnerID() {
var owner = Xrm.Page.getAttribute("ownerid").getValue();
ownerID = owner[0].id;
var ownerName = owner[0].name;
var entityType = owner[0].entityType;
GetToEmailGUID();
//Get customerid who receive email of quotation from owner
function GetToEmailGUID() {
var Customer = Xrm.Page.getAttribute('customerid').getValue();
CustomerId = Customer[0].id;
var CustomerName = Customer[0].name;
var entityType = Customer[0].entityType;
//if CustomerId is type of "Account" then get Primary Contact id of that account
if (entityType == "account") {
var contact = Xrm.Page.getAttribute("customerid").getValue();
if (contact === null) return;
var serverUrl = Xrm.Page.context.getClientUrl();
var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
var req = new XMLHttpRequest();
req.open("GET", oDataSelect, false);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
req.onreadystatechange = function () {
if (req.readyState === 4) {
if (req.status === 200) {
var retrieved = JSON.parse(req.responseText).d;
CustomerId = retrieved.PrimaryContactId.Id;
else {
alert(this.statusText);
req.send();
function CreateEmail() {
GetOwnerID();
email.Subject = "Email with Report Attachment";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
GetReportId('ABM_Infotech_SalesQuote');
//Create attachment for the created email
function CreateEmailAttachment() {
//get reporting session and use the params to convert a report in PDF
var params = getReportingSession();
//Email attachment parameters
var activitymimeattachment = Object();
activitymimeattachment.ObjectId = Object();
activitymimeattachment.ObjectId.LogicalName = "email";
activitymimeattachment.ObjectId.Id = email.ActivityId;
activitymimeattachment.ObjectTypeCode = "email",
activitymimeattachment.Subject = "File Attachment";
activitymimeattachment.Body = encodePdf(params);
activitymimeattachment.FileName = "Report1.pdf";
activitymimeattachment.MimeType = "application/pdf";
//Attachment call
SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
//ActivityMimeAttachment CallBack function
function ActivityMimeAttachmentCallBack(result) {
var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
var width = "800px";
var height = "600px";
window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
// To open window which works in outlook and IE both
//openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width,
height, features);
//This method will get the reportId based on a report name that will be used in getReportingSession() function
function GetReportId(reportName) {
var oDataSetName = "ReportSet";
var columns = "ReportId";
var filter = "Name eq '" + reportName + "'";
retrieveMultiple(oDataSetName, columns, filter, onSuccess);
function retrieveMultiple(odataSetName, select, filter, successCallback) {
var serverUrl = Xrm.Page.context.getServerUrl();
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
if (select) {
odataUri += "$select=" + select + "&";
if (filter) {
odataUri += "$filter=" + filter;
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataUri,
beforeSend: function (XMLHttpRequest) {
XMLHttpRequest.setRequestHeader("Accept", "application/json");
success: function (data) {
if (successCallback) {
if (data && data.d && data.d.results) {
successCallback(data.d.results);
else if (data && data.d) {
successCallback(data.d);
else {
successCallback(data);
error: function (XmlHttpRequest, errorThrown) {
if (XmlHttpRequest && XmlHttpRequest.responseText) {
alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
function onSuccess(data) {
reportId = data[0].ReportId.replace('{', ").replace('}', ");
CreateEmailAttachment(); // Create Email Attachment
//Gets the report contents
function getReportingSession() {
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
var Id = Xrm.Page.data.entity.getId();
var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
quotationGUID = quotationGUID.replace('}', "");
var reportName = "ABM_Infotech_SalesQuote"; //set this to the report you are trying to download
var reportID = "751089AA-74B8-E211-B52F-D8D3855B253B"; //set this to the guid of the report you are trying to download
var rptPathString = ""; //set this to the CRMF_Filtered parameter
var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition
attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName="
+
reportName + "&isScheduledReport=false&p:ABMFilteredQuote=" + strParameterXML;
//remove the part starting from &p:salesorderid if your report has no parameters
retrieveEntityReq.send(rptPathString);
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
"&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
"&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
} else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
</script>
<script type="text/vbscript">
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</script>
</head>
<body>
<input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html> -
Send mails with csv file as an attachment through oracle(SQL SCripts / Stor
Hello Everybody,
I have recently come across a requirement in which I am supposed to send mails with csv file as an attachment through oracle(SQL SCripts / Stored Procedure) .
The contents of the csv file are to be retreived from the Database as well as the content of the mail and to whom it needs to be sent has also to be picked up from the database.
Can somebody suggest me with a suitable code for the same?
Would be of great help..!!
Thanks & Regards,
- VR
Edited by: user646716 on Dec 18, 2009 10:44 AMread below links
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:255615160805
http://www.orafaq.com/wiki/Send_mail_from_PL/SQL#Send_mail_with_UTL_TCP_-withattachments
How to send csv file as an attachment -
I get a weekly email with a PDF attachment and when I open it it's to large to print and I know of no way to shrink or resize the doc. It's created in M/S excel. Can anymore assist....TX
From: Test Screen Name [email protected]
Sent: Sunday, August 04, 2013 11:32 AM
To: gunner0490
Subject: I'm not able to open PDF files in Adobe Reader XI.
Re: I'm not able to open PDF files in Adobe Reader XI.
created by Test Screen Name <http://forums.adobe.com/people/TestScreenName> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198 -
Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when iall other programs are closed. How can I fix this issue?
Thanks Jeff, I was not aware that a template could be multi-page. (All the existing templates were 1 page)
But it worked, saving me some steps. When I was finished I renamed the document, and locked it.
Then tried to save it but could not because it was locked. I closed it, went to my Spread Sheet Folder ,
to find it, it was not there. The Finder could not find it either.
So I start over again.
I opened up Numbers and it showed my personal Numbers template folder, it contained both my new
original 4 page template and the vanished saved document!
I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again. I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
The secret is: Click on the document title in the menu bar, and it opens up "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving. Once done that, you can then lock the document in the same pull down menu, and then close it.
I also found later that I can delete a template from its folder, by letting Numbers open the templates,
clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
and from there the selected template can then be thrown into the Trash from there.
It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document. -
I'm using iphone 4S and ipad mini, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. Can someone help...
Thanks in advanceHi Eidda,
This may because the attachment is a winmail.dat file. I would recommend taking a look at the article below for more information. Note: the article is written for OS X mail, but does also apply to this situation.
Mac OS X Mail: What is a winmail.dat attachment?
http://support.apple.com/kb/HT2614
-Griff W. -
attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outbox progress section but I can not delete it when it is there.
Where do these files reside?
Is there a hidden Outbox??
MacBook Pro, Mac OS X (10.7.1)If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
Shell Script to send email with .txt file as attachment
Dear Al,
Could any one help me with code, for sending email with .txt file as attachment using shell script.
Thank You!978334 wrote:
Dear Al,
Could any one help me with code, for sending email with .txt file as attachment using shell script.
Thank You!http://bit.ly/XHfSCz
https://forums.oracle.com/forums/search.jspa?threadID=&q=sendmail&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Please help, I'm unable to send an email with a pdf attachment
We have Windows 8 Pro on the pc, I have been trying to send a pdf document that my husband needs to his work and no matter how I try to send it (either from reader or directly from my email with the attachment it just will not send. Can anyone please help?
No worries. But it is strange that you cannot even send email with a PDF attachment from Microsoft Mail. At this point, no PDF viewers (e.g. Microsoft Reader, Adobe Reader Touch) are involved because you are not viewing PDF files.
Instead of saying "It won't send", you need to describe exactly what you see on the screen for every step. Where does the problem start?
Step 1: Attaching a PDF file to new email in Microsoft Mail
Are you able to find the PDF file and attach it to new email?
Step 2: Sending email with a PDF attachment
What happens when you click the Send button? Does it hang forever? Does it show an error message? Could you confirm that you can send email with other type of attachments (e.g. text file, Word file) from Microsoft Mail from the same PC?
You can provide the details to Microsoft for troubleshooting.
Alternatively, you can try to send email with the PDF attachment from other accounts like Gmail (Google Mail) or Yahoo Mail via the web browser (Internet Explorer) interface.
Sometimes, rebooting your system solves "mysterious" problems, too.
Good luck! -
I received an email with a video attachment in wmv format. I want to saved it on my iPhone 4S but it doesn't give the option of saving the video attachment. How will I saved the video attachment?
Even so, there is no way to "save" a file anyway. The only way to keep it is to keep the email with it attached. Someone correct me if I'm wrong but I don't believe there is a way to add a video this way into the Videos app.
-
One email with iPhone pic attachment is received multiple times
Searched the discussions and couldn't find this one. Problem is this:
My wife takes a picture with her iPhone and goes back to her camera roll to view it. While viewing the picture, she clicks to email the photo. She sends it out to her recipients (one time!), who are happy to get the picture the first time, but not the 3, 4 or 5 times following!
Any thoughts on what the issue here is? Recipient email addresses are in both Yahoo and AOL, so it can't be blamed on the recipient email server.
Why are these leaving the outbox multiple times?
Also, no "multiple sent" issues with emails that don't have pix attached.
Thanks! -SteveI have this exact same problem. After trying to send an email with a picture attached, the person receives it multiple times and then i will get an error on my device, stating that the email did not deliver, when in fact it did, and keeps on sending it a few more times. Between 2 and 5 times each time i send an email with a picture. This was not happening if a picture was not attached.
-
I attempted to eprint an email with an excel attachment. The attachment didn't print
I attempted to eprint an email with an Excel attachment. The email message printed but the Excel attachment does not print
Hi DaveF100,
You may want to refer to the help section of ePrintCenter.com here about attachments. In general though, Excel documents will have difficulty if they have complex variables in the document, such as pivot tables, macros, etc.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.
Maybe you are looking for
-
Whenever there is an attachment to a message for my ATT or Yahoo email on Firefox, I get the error message stating that I need Adobe 9.0 or higher to access the email I am opening. I have downloaded Adobe 10.0 and restarted the machine multiple times
-
Messages in multi-message format can only be sent to one Adapter Engine
Hi, Using XI 7.0 SPS 12 I have a scenario Single Flat File->XI->Multiple Messages to ECC. Due to an annoying limitation/bug in ECC we have to send workorders in to be processed as individual transactions. This means generating seperate calls to ECC
-
Highest supported Sun java for forms 10.1.2.0.2?
Hello everyone, According to Oracle's "client platform statement of direction 10gr2" web page, the highest officially supported version of Sun java for our environment (XP, IE 6, Forms 10.1.2.0.2) is 1.5.0_06. Is this indeed correct? The Sun site has
-
CFolder with Documentum content server
Hello, We have installed cFolder on WAS which has a RFC connection with ECC6.0 and this ECC6.0 instance uses Documentum content server. I want to understand , is there any impact in terms of document export/import in between content server and cFold
-
HD to SDD upgrade question (Part 2)
I know this was asked before, if one could upgrade the MBA from a Hard Disk to a SDD, but here's another question: * Would an Apple Store do such an upgrade, or would the customer have to do it - even if he/she was a member of Apple's Pro Care? -Dan