Setting ringer to silent for a single number

I don't know how to do this. But i have a few numbers that i want to set so that when they call they don't have a ringer. I can't seem to find a way to set a single number to not have a ring tone. I don't care as much if it vibrates but just don't want the ringer.
I thought about recording some silence and then using it as a ring tone..but just wondering if there is an easier way that I"m missing.
Thanks!

http://www.maclife.com/article/blogs/createsilent_ringtoneiphone
Looks like your silent ring tone is the only way.

Similar Messages

How to set a Multiple condition for a single CFL

Hi everyone,
Hey guys, i have a problem filtering a CFL (ChooseFromList)
where i have to select records
WHERE U_SalesmanCode = <ConVal>
AND U_Status = <ConVal>
so i've some up with an idea setting up multiple conditions on a single CFL.
i have a function "SetCFLConditions" that will be called after the CHOOSEFROMLIST_EVENT was triggered. this will set the conditions on a loop method.
the CODE works fine. but it only accepts the last condition.
Public Sub SetCFLConditions(ByVal _chooseFromList As String, _
                                ByVal _alias As String, _
                                ByVal _operation As SAPbouiCOM.BoConditionOperation, _
                                ByVal _condVal As String)
        Dim oCFLCollection As SAPbouiCOM.ChooseFromListCollection = _form.ChooseFromLists
        Dim oCFL As SAPbouiCOM.ChooseFromList = oCFLCollection.Item(_chooseFromList)
        Dim oCons As SAPbouiCOM.Conditions
        Dim oCon As SAPbouiCOM.Condition
        Dim asAlias() As String = _alias.ToString.Split(",")
        Dim asCondVal() As String = _condVal.ToString.Split(",")
        Dim i As Int16
        oCFL.SetConditions(Nothing)
        'oCons = oCFL.GetConditions()
        For i = 0 To asAlias.Length - 1
            oCons = oCFL.GetConditions()
            oCon = oCons.Add
            '//LOOP CONDITIONS
            With oCon
                .Alias = asAlias(i)
                .Operation = _operation
                .CondVal = asCondVal(i)
            End With
        Next i
        oCFL.SetConditions(oCons)
    End Sub
Pls. Help
Thanks
Edited by: Roger Arce on Apr 17, 2009 12:14 PM
Edited by: Roger Arce on Apr 17, 2009 12:15 PM

Hai Roger Arce
Better you post your question in SDK forum
Edited by: Prasanna s on Apr 17, 2009 12:52 PM

Can you set a distinct ringtone for an incoming number?

We have a client with a UC560. There is a sip-based call box on extension 321 that can unlock a door. We want the calls to come a specific 7962 handset that sits next to a screen that shows a security camera pointed at that door. We would like the call box to have a different ringtone from all the other calls that come into the 7962 so that the ladies know to look at the camera before picking up the phone (which would unlock the door). Is there a way to assign a unique ringtone to an internal extension?
Thanks!!

7962:
button 1: ext300 <---- used as primary line
button 2: ext301 <---- used only for opening door.
The normal calls will go to extension 300. ONLY the callbox will call 301. Therefore when she receives calls on 301 they should only be coming from the callbox. Therefore when you assign a ringtone to that button it will ring differently for calls from the callbox.
EDIT: This may be of help when configuring a different ringtone:
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7962g_7961g_7961g-ge_7942g_7941g_7941g-ge/8_0/english/user/guide/62614241cus.html

How to set the intial Value for a single radiobutton in a Radio Group

Hi All,
I have a radiogroup with 3 buttons. The Names of the RadioGroup are driven from a XXVO.
3 Radion Buttons:
* X
* XX
* XXX
When the Page loads i want to make one Radio button XXX to be the default , please suggest how do i do it.
Note : The radiobutton values are coming from VO
Thanks

Hi ,
As AJ said create 3 radio buttons in ur page and assign to one radio group,,
OAMessageRadioButtonBean appleButton3 =
(OAMessageRadioButtonBean)webBean.findChildRecursive("GroupButtonOne21");
appleButton3.setName("serviceAgreementGroup");
appleButton3.setValue("RW");
OAMessageRadioButtonBean orangeButton3 =
(OAMessageRadioButtonBean)webBean.findChildRecursive("GroupButtonTwo21");
orangeButton3.setName("serviceAgreementGroup");
orangeButton3.setValue("NW");
---For radio button u can check in page it self.
Regards
Meher Irk
Edited by: Meher Irk on Nov 23, 2010 2:47 PM

I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account. why is this?

I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account.
How can I change the setup so on the email only the iPad rings and on the phone number only the phone rings?

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

Restriction of number of POs for a single Sales Order

Hi,
Currently, For a Single Sales Order multiple Purchase Orders are being created. Now, the Client wants to restrict number of Purchase Orders for a Single Sales Order that means, he wants only 1 Purchase Order for 1 Sales Order. Could you guys suggest how can I do this..? Is there any configuration for this ? Please suggest.
A quick reply would be very helpful.
Thanks in advance.

Hi Pavan,
In VA01 once you enter into the document and give the sold to party name below that you can see PO No there give only one PO no and and PO date based on the requested quantity the sale order will be created subsequent delivery and billing will happen.
Regards
Ram

Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?

Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?
Mostly it's to call in for radio contests. The Iphone is really good at making a quick call, but it seems to timeout after 15-20 rings. I realise this is a small thing, but free tickets is free tickets.
Most commenst I see is abotu incoling calls, not outging.
Thanks.

No. You can't do this with any phone.

Multiple Prepayment for a single Assignment or specific Assignment Set

Hi Everyone
I am working in Payroll Department, and I had a difficulties of running more than one prepayment for the same. We need sometime to pay for an employee a specific element like "Official Assignment Compensation" before the end of the month and we use Quick-pay by select specific element. then I use Prepayment. In the end of the Month, when I do run to the remaining elements it had no problem. but when I do re-prepayment it return to the first prepayment the quick-pay run not the payroll run.
I appreciate if anyone can explain how to do more than one prepayment for a single employee in a single period.

Thanks alot ysaadeh
I did managed to do it by doing the following steps:
- Quick Pay for a single employee
- Pre-Payment for this Quick Pay
- Bank Transfer Report - which shows the Employee No, Employee Name, Employee Bank Name and Ban Account Numbers and Amount for the Quick Pay
Then
- Payroll Run @ the end of the Month
- Pre-Payment for Payroll Run
- Bank Transfer Report ..
It worked fine. But I notice one thing. When I do pre-payment for Payroll - the second pre-payment, Bank Transfer Report only take the Data from the last Pre-Payment.
I cannot do the Bank Report for the Quick Pay After Running the Payroll Pre-Payment ..
Is there some way I can use Bank Report for these Both Pre-Payment
and Is there a way I can use Quick-Pay for a set of Employees - An assignment Set .
Thanks again and appreciate you feedback.
Regards

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

How To get the number of request's for a single Composite Application

Hi can any body tell how to get the number requst's for a single composite application.
Thanks
Mani

Hi,
There are lots of STATE is available for composite instances, like mentioned in the below query. I hope you will get answer from the below query.
SELECT (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END) AS STATE, component_name, COUNT(*) AS NUM_OF_CUBE_INST FROM CUBE_INSTANCE where composite_name='PASS THE COMPOSITE NAME HERE..........'
group by (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END), component_name;
Thanks,
Vijay

Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasnt the person who set this up originally so I'm a bit

Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasn't the person who set this up originally so I'm a bit lost, i cant seem to find any serial numbers on the my account section and it seems we have no registered products? can you help?

Hi There,
We have checked the details of your team, all seat are assigned properly.
Now there are few details that we would need in a Private Message so that I can assist you appropriately.
Name of the user:
Email of the user:
Meanwhile, try the below mentioned links.
Creative Cloud applications ask for serial number
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
[Note: Details that we need is critical, make sure you send them in via Private Message only.]
Thanks,
Atul Saini

Exporting Data for a single set of books from Oracle Financials

I have a multiorg set-up with multiple set of books in an Oracle instance. I want to be able to export data for a single set of books into a new Oracle instance.
Any insight into how this can be done (without going through each of the tables and referential integrity constraints) will be of great help
thanks
anoop

It is a bit unclear what you are sending these POs to the other system for? Is it for matching to invoices there? Is it for receiving into inventory there?
Are these two entities belong to the same parent but on two different oracle apps databases?
In essence what do they do with the PO that you are sending to them?
Why do you think there will be intercompany invoicing?
Thanks
Nagamohan

Hi there. I bought and downloaded photoshop elements 13 today. When I tried to set it up and was prompted for the serial number, the one I was given and subsequently entered ( correctly ,I checked numerous times) was seems invalid. What's the next step?!

hi there, I bought and downloaded Adobe photoshop elemts 13 today. When trying to set it up, I was prompted for the serial number which upon being entered was deemed invalid. I know the serial number is the correct one. What is the next step, how do I contact Adobe store?!?

Error "The serial number is not valid for this product" | Creative Suite
if that doesn't help, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Setting ringer to silent for a single number

Similar Messages

Maybe you are looking for