Setting Sender for SAP Alert Management

Hi All,
I developed a program that call SALRT_CREATE_API directly to sent an emial alert out. However, there ia not a parameter to set the sender of the alert email.
Can any gurus tell me how to define a sender for the alert email that's processed with the API?
Cheers,

Hello,
These procedures are readily available on help.sap.com , please check the following:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/frameset.htm
Regards,
Siddhesh

Similar Messages

Urgently required Good Installation Document for SAP Solution Manager 4.0

Hello Experts,
Iam implementing /installing SAP Solution Manager 4.0 in our scenario in a day/two. My query is tat do we need to install it APAP + JAVA based only or can we install it ABAP based only?
Secondly i needed good self prepared document for SAP Solution Manager 4.0 installation which gives me step wise step procedure in detail.Plz dont give service marketplace link as i hv already seen and checked installion guide over it ,act. i wanted self prepared doc which is of more use. The useful answers shall be surely awarded points. Requested to revert at earliest as i need this guide in a day itself.
My Email Id is [email protected] .
Regards,
Saumya

Hey Somya,
Can u plz send me the configuration guide of change request management that Rakesh had sent to you..
My Email-id is [email protected]
Plz its urgent, let me know if u want me to open a new thread so that i can reward you with points..
Tnx in advance.

Requirements for SAP Document management system in ECC 5.0

Hi All,
Can any one provide me the requirements for SAP Document management system in ECC 5.0.
SAP Component   ECC 5.0
OS    Solaris 5.9
DB    Oracle 9.2.0.7
Thanks in advance.
Regards,
Surendra
<removed_by_moderator>
Edited by: Juan Reyes on Aug 6, 2009 12:49 PM

That info is available either at http://service.sap.com/pam or http://service.sap.com/quicksizer
Please do some research before posting
Read the "Rules of Engagement"
regards
Juan

Issue working with WPF client v6.1.0.3 for SAP Service Manager 4.0

Hi All,
This issue is similar to an on - going discussion - http://scn.sap.com/thread/3508608
Issue Description :
1. We installed WPF client 6.1.03 for SAP Service Manager 4.0 using SMP 2.3 SP00. We got the below error
2. To solve this error we followed the forum - http://scn.sap.com/thread/3465106 and installed the certificate following the link for installing the self signed certificate from Sybase infocenter.
3. We came to know that this is due to the SMP version. hence as suggested by SAP we upgraded the server to SMP 2.3 SP03
4. We tried to connect the WPF client and again got the error "Communication error 14"
My Question is
1. After the server upgrade from SP2.3 SP03 , do I still need to generate a certificate again ? Is yes Please guide me the steps/document to do this step
2. Is there any document which mentions how exactly we use the WPF client, the configuration to connect the SAP backend and download the Syclo Service Manager 4.0 application without any issue
Please guide
Thanks
Neha

HI Steve,
I tested with the WPF client 6.1.3.X.
I was getting a different error with the host name "Connect to server myhostname certificate is for myhostname:domain name this is not valid. Commnication error(14)
However I got the solution in one of the link where they mention to provide the complete fully qualified domain name in the server ie myhostname:domain .
This has solved the issue and the WPF client is up and running.
Thanks for the help
Regards
Neha Mahanty

EWA: error message in CRM check for SAP Solution Manager system

Hello!
In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
Queue Name                                Status     Date of first entry             Entries
CSABUPA0000000070           READY     03.12.2007                          45
CSABUPA0000000934           READY     07.05.2008                          45
CSAIBASE0000000000           READY     23.11.2007                          36
CSA_ORDER_8000000000      READY     22.11.2007     5
CSA_ORDER_8000000001      READY     22.11.2007     3
and others.
I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AM

Hi,
Usually problems with hanaging CSA* queues are caused because too many
indiviaual queues are created for the qRFC resources to handle. You can
limit the number of queues as described in note 763680.
Note 763680 would be useful if all of your qRFC resourcesa are in use
when you have a great number of queues. With a large number of dialog
WPs on the system it would probably make sense to reduce the amount
as described in the note.
the casue when you have this problem would be to check SMQR -> GOTO ->
qRFC resources. You can also see if most of your dailog WPs are in use
in SM50.
Also refer to note 758677.
Please schedule report RSQIWKEX (Inbound) to run as described in the
note.
And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
When you replicate lots of data from CRM to R/3, there could be a qRFC
resource problem. In this case, the numebr of queues created can be
reduced by implementing the attached note 356228, particularly solution
2.
For CSA* queues is slightly different from the one decribed in note;
this is because the CSA queues exchange data within the CRM system.
The steps described should be followed, except that table SMOFQFIND
must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
respectively. It should be possible to follow the solution 2 in the
note as long as you use SMOFQFIND instead of CRMQNAMES.
Hope this helps
Cheers,
SH

Missing 0CLM_INVOICE Data Source for SAP Collections Management

I was activating BC for SAP Collections Management for BI, and it states that exist a 0CLM_INVOICE Data source.
I Look into ECC (R/3) and try to activate de datasource, but it doesn't exist.
Does anyone knows what could be the problem?
Best Regards
Jaime Benavides

Thanks a lot for the answers. We are now at BI Content Add-On 3 SP02, but the data source still doesn't appear.
We checked the R/3 system and it is on SAP BW SP 12.
any other ideas about this issue? We also have a oss message with the subjet.
Best Regards.
Jaime Benavides.

Volumes and Qtrees set up for SAP and Oracle

Hi Gurus
I Need your help Please
I need to get Volumes and Qtrees set up for SAP and Oracle.
I found a document from NetApp that helped a lot about the structure.
But what I donu2019t know and canu2019t find anywhere is sizing for the volumes and Qtrees.
I really need some guidelines on sizing these below:
FlexVol saplog
/usr/sap/SID
/usr/sap/trans
/sapmnt/SID
/home/SIDadm
/oracle/SID
/oracle/SID/origlogA
/oracle/SID/origlogB
/oracle/SID/oraarch
/oracle/SID/sapreorg
/oracle/SID/sapbackup
/oracle/SID/saparch
FlexVol sapdata
/oracle/SID/sapdata1
/oracle/SID/sapdata2
/oracle/SID/sapdataN
FlexVol mirrlogs
/oracle/SID/mirrlogA
/oracle/SID/mirrlogB
Thanks and appreciate your help

> I have gone through the Inst Guide and I was surprised to see only 50 MB for Oracle software directory ?
Where did you read that?
> The sizing given in Installation guide is for typical setup or do we need to size as per our requirement ?
The sizing give there is for the initial system setup. It does not contain customer specific requirements.
The usual process is:
- you contact your hardware vendor
- you use http://service.sap.com/quicksizer together with him and fill in the data
- the hardware vendor will offer you the storage and the machines for the setup
- the vendor configures with you the storage and the necessary filesystem layout based on that sizing
Each customers setup is different and requires the experience and knowledge from the respective hardware vendor how to set up the system so it performs well.
You can follow the suggestions given here, this will be enough for the initial setup but the system will grow. This is not taken into account in the installation guide because it's customer specific.
Markus

Ticket SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0

Hi,
I want to migrate all tickets from SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0 , please let me know the procedure how to migrate it.
DB Detail
SAP Solution Manager 7.0 - MSSQL( 9.00.4035)
SAP EHP 1 for SAP Solution Manager 7.0 - MSSQL(10.00.2531)
Thanks,
Kaleel

Dear Mohamed,
I was reading the post and the replies and while I think your question has been answered, I just want to make sure what you are trying to achieve. Is it a migration, where you have one Solution Manager system on SAP Solution Manager 7.0 and another
SAP Solution Manager EHP1 system and you were looking to migrate the Service Desk messages?
If you are "Upgrading" one system from Solution Manager 7.0 to EHP1 then all the messages are preserved.
If you are "Migrating" to a physically different system, then transfer of Service Desk Messages is not supported.
Please see the document [SAP Solution Manger- Conent Transfer|https://websmp204.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000608232009E]
Also Service Desk is a completely independent CRM Service, so the messages could always be archived, as has been suggested.
No depending on your scenario, is the EHP1 system brand new or is it already productive? If it was brand new, you might be able to do a homogenous system copy, and then upgrade the new system to EHP1. But if it is already productive, this would not be an option.
Hope this helps to clarify.
Regards,
Paul

SAP EHP 1 for SAP Solution Manager 7.0 configuration check

Hi All,
I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.

SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
Thanks
SM

BADI for SAP Claims Management Reporting

Does anyone has information in regards to the 2 BADI´s for SAP Claim Management Reporting.
- Business Add-In: Data Change in 'Claim Overview' Report
CLAIM_REPORT_ADD_1
- Business Add-In: Data Change in 'Claim Hierarchy' Report
CLAIM_REPORT_ADD_2
How to implement and what benefits do these BADI´s provide ?
Thanks

Hi,
This is what the documentation for the BADI says,
1) Business Add-In: Data Change in 'Claim Overview' Report - CLAIM_REPORT_ADD_1
Use
With this enhancement you can change data in the claim report 'Claim Overview'.
Do not change the key QMNUM in the transfer table pt_qmel.
Requirements
If you want to display more columns than those stipulated by SAP in the standard system in structure RCLAIM001 you must first add these additional columns to the structure RCLAIM001.
2) Business Add-In: Data Change in 'Claim Hierarchy' Report - CLAIM_REPORT_ADD_2
Use
With this enhancement you can change data for the claim report 'Claim Hierarchy'.
Do not change the key fields QMNUM, MANUM and OBJNR in the transfer table pt_qmel.
Requirements
If you want to display more columns than those stipulated by SAP in the standard system in structure RCLAIM002 you must first add these additional columns to the structure RCLAIM002.
It would be better if you could get in touch with your ABAP guys to know about how to implement these BADI's
Regards,
Gokul

Sending mail by alert management

Dear All,
I've scenario as below
In one of our customer ,MD(Director of Company) wants Purchase Order and Sales Order Details daily by e-mail
I've successfully configured email setting and I am Able to send e mail (Externally)
I've created the simple query and mapped with alert management
but ,from alert e-mail is not sending to recipient
observation:
Time interval I've set it to 8 pm every day
user is not logged in to SAP at that time
Is there any steps I've missed out ?
any work around suggestion would be appreciable.
Thanks & Regards
M G

Hi
I've followed steps you have suggested
and
getting following error
Looking for first schedule to be executed before/on 20140815 19:33
Handling schedule
StatusBar Success Message: This use of the software is subject to the End User License Agreement (EULA)
Starting Scheduled Report: Query
StatusBar Error Message: No printer device found
Error #-10 encountered
Executing XSLT transformation
XML Input is Empty
adding: BusinessOneAuditLoggerPid8668_20140815193332.Pid8668 (124 bytes security) (deflated 72%)
adding: BusinessOneb1loggerPid8668_20140815193318.Pid8668 (124 bytes security) (deflated 83%)
SAP Business One Client return code:0
Unable to extract HTML report output to file C:\Windows\TEMP\Report.html Error code:-2028
Unable to extract PDF report output to file C:\Windows\TEMP\Report.pdf Error code:-2028
Unable to extract XML report output to file C:\Windows\TEMP\Report.xml Error code:-2028
No HTML body found nor attachments - there is nothing to send
An error occured while distributing results
SAP B1 client did not update new scheduyle date and time! Deactivating the schedule to prevent infinite loop.
An error occured while creating report by SAP B1 Client
Schedule processed

Competitors for SAP Solution Manager within central system monitoring

Hello!
We currently use SAP Solution Manager (CCMS monitors from RZ20) for the central system monitoring for several SAP systems.
Are there some other tools/competitors that can also serve as central platform for system monitoring of several SAP systems?
(e.g. HP OpenView).
Many thanks!

Hello,
You may want to take a look into the EarlyWatch Alert report.
It's a weekly report that gives information about many different areas of your systems and helps you to maintain them. It helps to detect problems before they occur by analysing trends on your systems and alerting about it. It definitely may work taking a look into it: service.sap.com/ewa.
It does not have an additional cost, all you need is a solution manager.
Regards,
Daniel.
Edited by: Daniel Nicol on Apr 11, 2011 8:04 PM

Career for SAP Strategy management & BPC?

Hi Guys,
Could you please advise me on SAP Strategy management & BPC. How about the future for this?
Is this good for career, if I learn SSM?
Please advise me.
Thanks in advance!
Anil.

Hi Harish Bysani,
Thanks for your valuable info.
Presently I'm working on BI-BPC. Also have a scope to work on BPC that's the reason why posted.
I will involve/gain more knowledge on Finance side. Actually I dont have that much skill on it.
Basically I was Microsoft technologies and .NET programmer for last 6 years. Then I moved into SAP BW since 2 years.
Please provide me so reference links where to gain Finance related knowledge to gain.
I have assigned points to you.
Thanks & regards,
Anil.

TREX on Portal-Server also used for search/index for SAP Records Management

Hi all,
can a installation of the TREX on the Portal-Server (or as separate Server) used for Portal Index/search and also in parallel for searching of Content in an SAP Records Management (means full text research of records/ dossier in the SAP RM) ? Some ideas, tips or settings to keep in mind ?
THX
mario

Hi Neil,
We have exactly the same problem. We installed a new SAP E-Commerce system on Microsoft Windws 2008 R2 with TREX Version 7.10.43.00. The TREX connection is okay. Also the catalogue replication works without any problems. The SAP support means it is a permission problem on the IIS. The problem isnu2019t solved yet and the message to the SAP support is in process.
What is your effect with this link?
http://localhost:<TREXNAMESERVER>/TREXHttpServer/
Default:
http://localhost:<30305>/TREXHttpServer/
Kind regards,
Roland

Client setting option for Productive solution manager

Dear all expert,
I've set in transaction code SCC4 (client setting) for my productive solution manager:
1. "No changes allowed" for changes & transport for client-specific object
2. "No Changes to repository and cross-client customizing objs" for cross-client object changes
However with above setting, when execute Tcode SOLAR01 & edit the structure/document, I am not allowed to save it, getting the error "Changes to Repository or cross-client Customizing are not permitted".
could anyone please advise what is the correct setting for the solution manager?
please help
thank you

Hi Pradeep,
User just need to edit/upload new documentation to the project SOLAR01, and this is not allowed because of the system setting
By the way, do you know any method that I can restrict user to edit the 'Structure' tab, but only allow them to upload & edit the documentation under 'project document' tab?
the recommendad way will be we always setup the project & complete in development system & then finally transport to productive solution manager without any further changes anymore?
please advise.
thank you

Setting Sender for SAP Alert Management

Similar Messages

Maybe you are looking for