Setting shows "bluetooth Unavailable" and greyed out

looking for possible reasons, why iphone shows "bluetooth unavailable". sometimes it jumps to "bluetooth off", sometimes to "bluetooth on" and then unsuccessfully searching other devices. iphone is very slow and touch stream reacts with delay.
Any clue, if this is a hardware or software issue? How to fix?
Reset + restore not successful. iOS 4.2.1
Have not recognized the problem under 4.0 - but not sure, if upgrade is the cause of the issue.
Thanks for any hot tip.

SMC=system management controller...reset like this:
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Barry

Similar Messages

Voltage options in bios all set to auto and greyed out

I have a MSI X48C motherboard. The bios allows me to change the FSB, FSB/Memory ratio along with a couple of other values, but all the voltages are set to auto and greyed out so I can't change them. I don't understand why this is the case. How am I able to change these voltages. I have tried enabling and disabling various functions in the bios, but nothing seems to unlock the voltages. What do I have to do?

It states this at the bottom of each bios screen, the help menu states this information, and the manual states it.

After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out. Also the scan function won't let me scan at any density greater than 150 dpi. I have talked to Applecare and to HP tech support and been told "too bad." Any help would be appreciated.

THANK YOU! And who are you? I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words. Many thanks! John

How to Strikethrough and Grey Out Check Box

Hello,
This is my first day using LiveCycle. I am trying to make a check box form (upon checking) strikethrough the entire field and grey out. I have the following FormCalc which I know is incomplete. Please help!! Currently the value is just causing my checkmark to turn the color value I've indicated.
(I have these settings Show: Click, Language: FormCalc, Run At: Client)
form1.#subform[0].Subform1.#field[1]
using action:
if ($ == "1") then // checked
form1.#subform[0].Subform1.#field[1].font.lineThrough= "1";
form1.#subform[0].Subform1.#field[1].font.fill.color.value= "91,173,160";
elseform1.#subform[0].Subform1.#field[1].font.lineThrough= "0";
form1.#subform[0].Subform1.#field[1].font.fill.color.value= "0,0,0";
endif

Hi Varma,
That didn't work. Thanks for your help though. I got an error message that says:
Error:accessor
'form1.#subform[0].Subform1.#field[1].ui.textEdit.border.fill.color.value' is unknown

"Copy files on import" checked and greyed out in elements organizer 12

Elements organizer 12. Importing from hard-disk. Want to import without copying files, but the box "copy files on import" is checked and greyed out.
Remains so even when selecting a fresh jpg file. (Import with copying is not a good option: eventually more than 50.000 pictures and videos are to be imported -
I would have to delete my main media file structure in favor of adobes internal storage. Major hassle right at the start of using adobe's software..).
What can I do ?
(I found the same question several times on the internet, but no useable answer).

If you are also using iPhoto; Elements will make copies to your hard drive to prevent corruption of the photo Library. The choice is Organizer or iPhoto to manage your images or you can use iPhoto together with the Elements Editor; in which case you need to set Elements as your external editor within the iPhoto settings.

Not Able To Wake Computer With Bluetooth Keyboard-Preferences Greyed Out

Looked in preferences, but wake using bluetooth keyboard is greyed out. Tried dumping bluetooth preferences, and repairing permissions. Nothing. Any help is appreciated.

More info: It is an Apple wireless keyboard.

Acrobat Pro 9 - Subset in TouchUp Text Tool is checked and greyed out.

Acrobat Professional version 9.1
The Subset option in TouchUp Text Tool is checked and greyed out.
How can this be unchecked.
Trying to embed full fontset.
Fonts are Arial, Arial Bold.
[email protected]

Hello Petros,
I figured out how to make this work, at least on my computer. Hold CTRL key and hit ENTER. This leaves the space. Hope this works for you.
Phillip

Boxes and grey outs

k in windows you know how theres sometimes boxes around different sections within "panels"? I think its called legend in javascript, might be wrong though. Does anyone know how to do this and greyed out components? I have pictures of both of these things at www.kruskal.net/outcast/greyoutpic.jpg thx

That's a titled border. Check out JComponent's setBorder method and the
javax.swing class BorderFactory. As for "graying out" components, that's what
they look like when they are disabled -- Component method setEnabled.
To disable components on a container, you can't simply disable the container;
you have to disable all the components individually, although it's easy to write
a recursive function to do that.

I tried to sync music to my phone and some of the songs and greyed out and wont play.. i cant delete them off the phone, nor can i sync any more music. can anyone help me?

the songs i tried to sync to my phone and greyed out and wont play, i cant delete them off the phone or sync any new music.. can anyone help me?

Same problem here - iPhone 6, iOS 8.1.2 and itunes 12.0.1.26

Disable and grey out caption of an enum type def

When i save an enum as a type definition i can no longer disable and
grey out it's caption or label. When the enum is not a type def, i can.
Is this a 7.1 bug ? Thanks.

This is probably similar to this, so yes, it does appear to be a bug.
Try to take over the world!

Sudden Change to Slide Show Display/Presenter View Greyed Out

Two weeks ago powerpoint was acting normally. I would come into class, hook my netbook up to the projector, set my monitor output option to extended desktop and start my slideshow in presenter view. This morning I went into class and I was unable to use
presenter view. It was greyed out. I had to clone the displays and wing it without my notes. Also, the slideshow itself *looked* different. There was an orange menu bar at the bottom that I could not get rid of. Has this happened to anyone else?

Hi Michelle,
Do you mean the "Use Presenter View" option under "SLIDE SHOW" tab on the ribbon is greyed out for you?
When you are in the "Slide Show" mode, please try to right click on the slide and see if you can select the "Show Presenter View" from the context menu.
Have you ever made any changes to your computer recently? You might want to try installing any required updates, including updating your graphic card driver to the latest version, then try again.
"There was an orange menu bar at the bottom..." - Is it possible to share a screenshot of it with us? You can send the file to this email account:
[email protected] and inform us here (the email subject should be the link of this thread).
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Frozen and greyed out

All songs are showing up in itunes but are greyed out and seems frozen

i'm having problems whereby my itunes is freezing @ startup, just as the podcasts are downloading. it's happening too fast for me to change the auto download feature.
i saw that my "terminal services" is set to Manual.
is there anything other reason you think this might be happening?
thanks!

ITunes 11 has moved most of my audiobooks to music, and greyed out the "audiobook" option in the info pane. WHY?!?!?

Now I have a music library filled with audiobook content and music content all mixed up, playing EVERYTHING when I'm on shuffle because iTuness 11 has now also reset the previously-audiobook-now-music content not to be skipped in shuffle, and I can't fix it because the option is greyed out. Can anybody help me?

Just an update, following last nights USB sync all music shows as In the library on my iPhone, however only the same 500 or so songs are playable, the rest go from appearing to be in the library to going into the cloud and starting to download when manually selected. If on shuffle the music skips over them. The iPhone memory usage shows only about 10gb used most of which is for the iOS/apps, so once again my music library is not on my iPhone. Apple have managed to take a great product and turn it into a steaming pile of turd.

I can no longer sync new music i've downloaded into my iTunes library onto my phone. When i click the playlist "recently added" under my phone on my computer it just shows all the songs greyed out with a dotted circle on the left hand side. Any clue why?

For Example: like this makes no sense. is it because it wasnt purchased directly from itunes? If so thats ridiculous. I've had an iphone for over a year, and a macbook for over 2 years. my phone is completley updated to 7.0.3 and my computer is completley updated with the new itunes 11.1.12 which i thought was supposed to help this problem. I've never had this problem, and its extremely frustrating.

I downloaded one of the file explorer programs (iFunbox in my case) for my PC and deleted everything out of the "Purchases" folder on the phone's "Raw File System". After a couple of syncs with iTunes everything was back to normal. It appears that something was screwed up on the iPhone side that iTunes couldn't sort out. I don't think anything could sync from iTunes to the phone, not just the greyed out items.
This is why resetting and restoring the iPhone also works for a lot of people. It's overkill though, deletes your app data, and just wastes your time setting everything back up after the restore. Better to use the surgical approach of a file system explorer program on your PC to fix what appears to be a mundane data corruption issue.

Deploy to single managed server checked and greyed out while performing upgrade to EPM 11.1.2.4

Hi Gurus,
We are trying to upgrade EPM from 11.1.2.2 to EPM 11.1.2.4 and have applied the maintenance release successfully.
Issue:
When we are trying to configure EPM 11.1.2.4 and are providing the same Shared Service database details, at the summary screen, we are not able to uncheck the option "Deploy to Single Managed server" which is checked and is greyed out.
We have tried the following:
1. We updated the HSS_COMPONENT_PROPERTY_VALUE table and updated the PROPERTY_NAME "isCompact" to false.
2. Modified the config.xml file located at EPMSystem/config and epmsystem1/config to remove the property for compactState.
We are still having the issue where we are not able to uncheck the option for Compact Deployment. Any help would be appreciated.
Thanks in advance.

As it is a maintenance release and it deployed as a single managed server then you will not be able to change the deployment type when applying the maintenance release.
There is a procedure to change a deployment type from compact to single managed server that I created as an internal document.
you may want to give it a go but you would need to test this first as this was an in house test that I carried out.
Hyperion Planning - Version 11.1.2.2.300 and later
Information in this document applies to any platform.
Goal
The scenario:
EPM system 11.1.2.3 was configured and deployed as a single managed server compact deployment so that only one JVM was used for all products EPMServer0.
Later on, due to performance issues, the decision was made to go for using a JVM for each product and get rid of the compact deployment.
The administrator went ahead and redeployed the application servers individually into their own JVM.
However everytime the webserver is reconfigured, the weblogicCluster entry in the OHS file mod_wl_ohs has 2 servers, one for EPMSserver running on port 9000 and another server running on the product default port (as if it was being load balanced)
The aim:
It is clear that initial compact deployment has not been cleared from the EPM environment and the aim in this exercise is to clear the registry and the file system so that the compact deployment is removed fromthe EPMenvironment and we are left with the desired configuration Single JVM deployment for earch web application.
Solution
Caution:
Make sure that you take a backup of the following:
- TheFoundation Services database schema backup
- Take a backup of the following folders:
\Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
\Oracle\Middleware\user_projects\domains\EPMSystem\servers
\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
Disclaimer:
This was tested in House and it worked for this specific environment and it may not work for your environment. So the suggestion is to test first in a development environment and make sure that you take the appropriate backups in case it does not go according to plan.
Use at your own discretion.
Procedure:
1- Run the epmsys_registry to generate the Registry report
2- Search through the report for the word applicationServerDeployment with a corresponding value of configured and take the ObjectID number down for any entry of applicationServerDeployment that has a value of Configured
i.e:
Instance Tasks Configuration (INSTANCE_TASKS_CONFIGURATION)
Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7adf
3- use the object ID of each entry you have taken down throughout the Registry HTML Report to manually set it back to Pending using the following procedure:
                Start a command prompt and set the working directory to
                 \Oracle\Middleware\user_projects\epmsystem1\bin
                run the command:
                 epmsys_registry.bat updateproperty #e4b3a86a82c26941S32ef81a1455fe48473S7adf/@applicationServerDeployment=Pending
                Repeat this command for each ObjectID that has its applicationServerDeployment
                 property set to Configured
4- rerun the epmsys_registry.bat to generate the Registry HTML report and search for applicationServerDeployment in the newly generated report to make sure that they are all set to Pending and there none missed (very Important).
5- Search the registry HTML report this time for EPMServer0 which is the default serverName given to the single managed server deployment (there will be multiple entries)
Take note of the first ObjectID entry in the section header: for example
WORKSPACE_WEBAPP (WORKSPACE_WEBAPP)
Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Start a command prompt and set the working directory to
                 \Oracle\Middleware\user_projects\epmsystem1\bin
- run the command:
                 epmsys_registry.bat view #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
-Note the Parents ID in the output:
For example:
Parent 1
NAME - WORKSPACE_LWA
ID - e4b3a86a82c26941S32ef81a1455fe48473S7bd0
TYPE - LOGICAL_WEB_APP
Parent 2
NAME - HOST:BACHVMPS3TR
ID - e4b3a86a82c26941S32ef81a1455fe48473S7ffe
TYPE - HOST
- Note the single child ID:
For Example:
Child 1
NAME - WebLogic 10
ID - e4b3a86a82c26941S32ef81a1455fe48473S7fd6
TYPE - APP_SERVER
Now run the following command to remove the Link between Parent and child:
epmsys_registry removelink #parentObjectID #childObjectID
In this example that would translate to:
To remove the single child1 link to the WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ):
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd3 #e4b3a86a82c26941S32ef81a1455fe48473S7fd6
And do the following To remove the link between WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ) and Parent1 and Parent2:
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
#e4b3a86a82c26941S32ef81a1455fe48473S7bd3
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7ffe
#e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Now that the link has been removed, delete the WORKSPACE_WEBAPP component using its ObjectID :
epmsys_registry deletecomponent #parentObjectID
In this example:
epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Delete also the Parent representing the WORKSPACE_LWA
epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
Note:So we have now deleted the WEBAPP and LWA for workspace.
6- Repeat steps in section No 5 for every WEBAPP with EPMServer0
7- Start the Weblogic admin console and login
Then go to the left panel and Expand Environment -> Server
Click on Lock & Edit -> Select EPMServer0 -> click on Delete and confirm
Activate Changes and Log off
8- Stop the weblogic admin console server
9- Go to the following location and delete the folder EPMServer0:
\Oracle\Middleware\user_projects\domains\EPMSystem\servers
Delete also EPMServer0 from the following location:
\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
10- Start a command prompt and delete the Windows service that was created for EPMServer0 (if using Microsoft Windows Operating System):
Right click on the service 'OracleHyperion EPM Server - Java Web Application (epmssystem1)' and get its service name i.e: HyS9EPMServer_FOUNDATION1
Run the following command: sc delete HyS9EPMServer_FOUNDATION1
11- Launch the EPMSystem configurator and redeploy the web application server to their own JVM
12- Go to the following location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component and rename the file mod_wl_ohs.conf to mod_wl_ohs.conf.old.
13- Copy the unconfigured mod_wl_ohs.conf file from the location C:\Oracle\Middleware\ohs\ohs\conf to the location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
14- Run the EPM System Configurator again and configure the WebServer to reconfigure the OHS configuration file mod_wl_ohs.conf.
Once done then open the mod_wl_ohs.conf file and make sure that there are no servers configured with Port 9000.
15- Start the services and test the workspace

Setting shows "bluetooth Unavailable" and greyed out

Similar Messages

Maybe you are looking for