Setting speaker with Audigy 2 under Vi

Hello,
I've a problem under Win Vista with an Audigy 2.
When I try to set the speaker to 4. or 5. the software doesn't save the settings.
Someone knows how to solve this problem?
Thanks
Andy

I have the last version of the Audigy drivers available on the support website.
Creative Sound Blaster Audigy series Vista Driver 2.2.0002 (38.30 MB)
Now i have disabled the other audio card i have to let it runs with 4. but i need it with both the audio card and the 4. as it was since SP... It runs for some days and then nothing more...
Thank u ;-)

Similar Messages

HT204053 I have another Apple ID from when I originally set up this iPod, now I can't reset it as I am also set up with Find My iPhone which may have been doen by mistake I have been in contact with Apple itself and they can't fix the problem so far

i have originally forgotten my pass code for a new iPod Touch, now I have with Apple's help reset it to factory, my issue is due to the change in my Apple ID , the iPod will not let me set it up under the new Id or the old one.I also have been set up with find my iPhone and I don't remember if I did this or not, could have been the grand children trying to help out. Any ideas or suggestions, I haven't even used this yet and I have owned it for 6months already. Really am disappointed that the process is so difficult to navigate.

I have also noticed the same "problem". I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.

My Apple TV was set up with a different Apple ID than I have for my ITunes Account. In other words I have multiple Apple ID's. How can get these accounts to sync up?

My Apple TV was set up with a different Apple ID than I have for my ITunes Account. In other words I have multiple Apple ID's. How can get these accounts to sync up?

If you wish to use home sharing then you need to setup the Apple TV under your ID.

How can I change my Apple ID that is set up with an old email that does not exist anymore

I set up an Apple ID years ago with a hotmail email account. I also deleted that hotmail email account years ago. I now have a gmail email. I cannot back up anything to icloud because of my apple id that is connected to the hotmail email account that does not exist anymore. To change my ID, apple sends a verification email to my old hotmail account which i cannot access, and it also says my gmail account is my rescue account, so I wouldn't be able to change it to my gmail account anyway. Any ideas? I'd like my ID to be associated with my one and only current gmail email account. I have a lot of songs that I've spent a lot of money on over the years that I don't want to lose.

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...

How-To Set Up with Uverse Gateway with Airport Extreme

I just spent hours figuring this out so I thought it would be helpful to someone. Maybe, maybe not. My goal was to get Back to My Mac turned on...but this should also be how you set up your wireless network if you have both an Airport Extreme and a Uverse Gateway.
As I was trying to setup BTMM, I got a "double NAT" error. To use BTMM, you have to use either Time Capsule or Airport Extreme, so that NAT has to be enabled. That meant I had to figure out how to turn off U-verse's. I looked through the settings but saw nothing about it. Several hours of research--and a useless support call to AT&T--I finally figured it out. Here's the configuration you need, in brief.
On the Airport Extreme, under Internet > Internet Connections, Connection Sharing must be set to "Share a public IP address". Then under the NAT button, Enable NAT Port Mapping Protocol must be checked.
Now, unless you doe rest of this configuration, you will get a double DHCP error. So, in the Uverse Gateway settings, you must do this:
1. Under Wireless, click the option to DISABLE wireless. Click Save.
2. Under Firewall, click the option with DMZ in the name. On this page, choose your Airport Extreme (whatever you named it). Then scroll down and choose the option that says "Allow All Applications (DMZPlus Mode)". Save that configuration. DO A HARD RESET ON THE AIRPORT EXTREME. Then that should enable a single NAT protocol and BTMM will be on its way. And your wireless network will be set up properly.

Will the above method work on a set up with a Verizon Modem to a DLink wireless router to a Time Capsule?
I know of no reason why it would not. Whenever there is another router ahead of the Time Capsule, the Time Capsule must be configured in Briddge Mode. My network has 4 routers. The "main" router is setup to handle DHCP and NAT and the other 3 routers are setup in Bridge Mode. No problems.
Weird thing is Air Video set up tells me I have a double NAT
Double NAT occurs when you have two routers on a network both set up to handle DHCP and NAT services. Your Verizon "modem" may be a gateway....a combination modem/router on the same chassis. If that's the case, then every other router on the network must be confgured as a "Bridge".
If you have the "main" router on the network setup to handle DHCP and NAT, in theory, you can have multiple other routers on the network as long as they are all setup in Bridge Mode. In Bridge Mode, DHCP and NAT are turned off, so the other routers simply pass through the network information from the main router. It's by far the easiest way to configure multiple routers without having to go into special DMZ, port mapping, etc type of configurations.

How Can I put an Artists Live Albums in a separate folder, so they sort by "Concert Date" in iTunes and do not "intermingle" so to speak with Studio Albums? Is this possible?

How Can I put an Artists Live Albums in a separate folder, so they sort by "Concert Date" in iTunes and do not "intermingle" so to speak with Studio Albums? Is this possible?
That is about the best way I can phrase my question.
I put year/month/date at the beginning of a show, hoping for them to sort by date and I get mixed results.
Would creating a Folder within the Artists' existing folder that said "Pearl Jam Live", inside the "Pearl Jam" folder in iTunes Media help this "Date Sorting Issue"?
Thank you.

Or is there a way to go through aperture to make a new reference library that I can move the masters into later?
you do not move the masters into a references library - you turn your current library into a referenced library. As Terence Devlin said:
File -> Relocate Masters
What you should set up:
Select a folder, where you want to store your referenced files - probably on an external drive.
Decide on a hierarchical folder structure inside this folder - that is completely up to you.
Select a project from your library and use the command "File -> Relocate Masters/Originals" to move the original image files to the folder where you want to go them to. Only take care not to send two projects to the same folder.
Alternatively, if you do not care about the folder structure Aperture will use, select all images at once from the "Photos" view and let Aperture decide how to assing the folders - in the "Relocate Originals" dialoge you can specify a subfolder format.
Regards
Léonie

How to enable the bundled remote from the Audigy 4 under Vi

Hy folks, how can I enable the bundled remote from the Audigy 4 under Vista ? I can't find the software on my CD.
Greetz Handon

Hello Rupa,
I did't get your exact quetion. now your upgrading from version 11.5.9 to 11.5.10. after upgrading only you can set the profile options. As i know we cant change the profile options before upgrading.
cheers
Krish....

Dragon Naturally Speaking with the lid/screen closed

I want to use Dragon Naturally Speaking with the lid/screen closed. Please tell me what settings. Thanks in advance.

Hi,
I did few tests which my laptops, they sit on docking stations with their lid closed and the sounds were so weak because due to the location of the internal microphones. You need to use an EXTERNAL microphone, you can set you laptop to stay ON after closing the lid:
http://windows.microsoft.com/en-au/windows7/change-what-happens-when-you-close-your-laptop
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have an "Command set ID" with value "A" in SPAD tansx with com. to transf

Hello
Does anyone knows how a device in "spad" transaction functions (in Unix)
Under Access method"L:Print Locally Using LP/LPR") I have an Command set ID with value "A" .
Under mentioned "command set" I have :
"command to transfer data " set to " /usr/bin/cat &F >/usr/sap/planning/REMINDER&N.txt". What does that means.
Does it mean any printout is copied to "/usr/sap/planning/REMINDER&N.txt" file? Also corrupted (not finished...) ones?
what is the name of file under "/usr/bin/cat ". Is it always the same? is it copied in same format (what
"&F >/" means?)?
Thx in advance

Hai,
Command set id option in SAP helps to override the DEFAULT SAP parameter for the command that a print program should use to have a host spooler perform an output request.
Default parameter is rspo/host_spool/print.
You can specifically give a command to your printer through this option, COMMAND SET ID.
Here " /usr/bin/cat &F >/usr/sap/planning/REMINDER&N.txt" is the command which helps thr spooler to direct your output.
/usr/bin -- is the directory under which it has all the commands for UNIX.
/usr/bin/cat -- where 'cat' is a command, cat command reads one or more files and prints them to standard output. The operator > can be used to combine multiple files into one.
&F Name of the file to be printed (with path specification).
/usr/sap/planning/REMINDER&N.txt -- is where you can find your output.
You can even use /usr/bin/cp instead of usr/bin/cat here the former command copies to another file after the &F option.
You can use any type of commands, please check the below link.
Also you can use this command set option for Null printers were you dont need the printouts but only the spool. Here you can set the command as 'cp &F /dev/null' were the output is redireted to /dev/null path at the OS level.
http://help.sap.com/saphelp_nw04/helpdata/EN/d9/4a8eb751ea11d189570000e829fbbd/frameset.htm
Regards,
Yoganand.V

Urgent: Need a docking speaker with internal battery and suitable for ipad or iphone4

Need a docking speaker with internal battery and suitable for ipad or iphone4
Does the following model fit those requirements? Do you have any recommendation for me on a docking speaker?
Philips - Fidelio Primo Docking Speaker for Apple® iPod® and iPad®
Model: DS9/37 | SKU: 3374032
Philips - Fidelio Docking Speaker for Apple® iPhone® and iPod® Model: DS7550/37 SKU: 2141072
Philips - Fidelio Docking Speaker for Apple® iPod® and iPhone® Model: DS8500/37 SKU: 3792704

You should not need to have special IP address configurations to manage your devices and software. You can do this in the private network offered by any router, provided all devices being managed are behind that router. If for some reason you need a static IP on the network (such as for the server itself), then you can delegate one to the server in your router, but you dont need a special public IP address configuration from your ISP to set this up and make use of it.

When I open Firefox a screen comes up that says register for "Inbox". I do not want to. I cannot deleate this and cannto figure out how to uninstall. Is it possible that I could speak with a live person that can help me.

I would like to delete the "inbox" screen from coming up when I open Firefox. I might help if I could speak with a person.

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

I need to update my iTunes and iPod touch,iPad and iPhone but they were set up with a hp laptop that i sold i tried to update my iTunes and apple devices but it tell's me if i update i will lose all media on my devices and to update with the original com

I need to update my iTunes and iPod touch,iPad and iPhone but they were set up with a hp laptop that i sold i tried to update my iTunes and apple devices but it tell's me if i update i will lose all media on my devices and to update with the original computr

Go to www.ecamm.com and d/l PhoneView.
To prevent a sync when plugging in the iPod/iPhone - hold down the 'option' and the 'command' keys when plugging in the iPod/iPhone - key the keys down until the iPod/iPhone is listed under the Devices list in iTunes - this will prevent a sync from taking place.
With PhoneView you can take the content from the device to the iTunes library.
MJ

Can i speak with a customer service rep

I have a few ipods each have differnt music from computers I have owned over the years. They are each accounts I set up with differnt emails. These are all me with my CC Date of Birth and address. Can i put all of may music under one account on this computer ? I would like to get a new I touch because I want all the music on one device. please let me know
jeff
<Edited by Host>

There is no way to merge Apple ID's.
You can load media from multiple Apple ID's onto a single computer share that with multiple iDevices.
None of this requires interaction from Apple... but it will require effort on your part.
Starting with authorizing a single computer for each of the associated Apple ID's.
Stop creating new Apple ID's every time you get a new device, there is no logical reason to do this. In fact, it's rather unintelligent.
Then connect each of your devices and tell iTunes what specifically to sync to those devices.

Audiences with multiple "Reports Under" rules

I am creating an audience with multiple "Reports Under" rules with the "Members satisfy any of the rules" option.
Steps
Create the audience.
Choose Members satisfy any of the rules
Choose Reports Under and specify a value (manager one name).
Choose OK, then Add rule.
Choose Reports Under and specify a value (manager two name).
Compile.
Results
Only members of manager two's team are in the audience.
Remove manager two and compile. Now only members of manager one's team are in the audience. Now add some other attribute, such as Department contains, then include manager two's department name. Compile and you see that the audience now contains all team
members from manager one (reports under rule) and manager two's (dept contains rule) teams.
Can an audience contain multiple "Reports Under" in SP2013? I seem to remember doing this successfully in SP2010.

Hi Gilbert,
According to your description, my understanding is that the audience which was set to satisfy any of the rules cannot work correctly with Reports Under rules in SharePoint 2013.
I tested the same scenario per your post in my environment, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

HT1918 Why is my debit card being charged for iTune purchases when my account is set up with my Amex card

Why is my debit card being charged for iTunes purchases when my iTunes account is set up with my Amex card?

Login to the account on iTunes and under payment info, select none for the credit card. iTunes is supposed to use gift cards and store credit over credit cards but it doesn't.

Setting speaker with Audigy 2 under Vi

Similar Messages

Maybe you are looking for