Setting SYSDATE in as URL Redirect

How do you set an item to SYSDATE in a URL redirect on a button.
I have list of comma separated items in the "Set these Items" field and a list of comma separated corresponding values in the "With these values" field. If I use SYSDATE then it is literally assigned to "SYSDATE". I tried to_char(SYSDATE) but still doesn't work.

I usually generate SYSDATE only in row-level triggers on the database tables to capture the insert/update time of rows. I have never needed to do what you are asking for.
Anyway, see
http://htmldb.oracle.com/pls/otn/f?p=24317:91
Click on the Edit icon on the report at the bottom of the page.
You can select SYSDATE (in whatever format you want) as a hidden column in the report and use #COLUMN# substitution, but as you can see, SYSDATE will be the timestamp on the server when the page was rendered, it will not be the current timestamp as of right now.
Remember HTML DB pages are generated in the Oracle database server and sent to the browser.
Or you can assign the current timestamp on the client machine in a link using Javascript Date() functions.
Hope this helps.

Similar Messages

Set item value at other page via URL-redirect

Hi, I have a button and I want to open a new window with it using an url-target.
</br>
</br>
javascript:window.open ('f?p=&APP_ID.:143:&SESSION.::NO:143:P143_KDT_ID,P143_MESSAGE:&P140_KDT_ID.,&P140_MESSAGE.') </br>
</br>
When I use branching I get an error that there is no page to branch to. I don't understand why. As a workaround I use an url-redirect when the button is pressed, but I'm stuck on getting the current item value into the target page. I tried using $v('P140_MESSAGE') but I can't get the url valid.

Jacob,
The problem was that when the HTML for the button is rendered, the value of P1_ITEM from session state was "glued in" to the generated URL at that time. If you then entered a value for the iterm, even though your onChange AJAX technique changed the value in session state it was too late to change the already generated HTML for the button, specifically the URL target for the button.
I created a Set Item2 button on your page with this for the URL attribute:
javascript:window.open('f?p=&APP_ID.:2:&SESSION.::NO::P2_ITEM:' + document.getElementById('P1_ITEM').value);
Let me know if that does what you need.
There is another problem and I don't know the cause. When you click the button, it opens the new window properly but leaves the original page in an error state of some kind. I could not reproduce this in my application using the same js, so I'll be interested in how you solve that.
Scott

I have a cisco ironport c170, i want set up URL redirect? But i don't khow how to ? Can you help me?

I have a cisco ironport c170, i want set up URL redirect? But i don't khow how to ? Can you help me?

The C170 does not support URL redirection prior to OS release 8.5. What exactly do you need to accomplish?

How to do auto URL redirect in sun web server ?

Hi, i need to do auto url redirect in my sun web server. Currently i'm setup some rules for the reverse proxy in obj.conf file and the syntax looks like:
<Object name="reverse-proxy-/test">
<If $internal and $uri =~ "index.html">
NameTrans fn="redirect" from="/" uri="/examples/abc.html"
</If>
Route fn="set-origin-server" server="http://localhost:8989"
</Object>
The situation is:
1) When users browse "*http://localhost/examples/abc.html*" it will redirect to abc.html
2) When users browse "*http://localhost/test*" it will redirect to the localhost admin GUI (http://localhost:8989/admingui/admingui/serverTaskGeneral)
My desire output should be whenever users browse the "*http://localhost/test*" , it will redirect to abc.html page.
the syntax might be wrong. So, anyone knows how to fix this? I'm keep trying but nothing worked. Please help me.

Moderator action: Moved from Servers General Discussion.
db

Need help with URL Redirect in Sun Web Server 7 u5

All I am trying to do is redirect to a static URL and for the life of me I can not get it to behave the way I would expect. I am new to Sun Web Server so I am just trying to use the Admin Console to set this up.
Here is what I'm trying to do:
Redirect from - http://www.oldsite.com/store/store.html?store_id=2154
To - http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
Here's what I tried in the console.
Added a new URL Redirect
Set the Source to be Condition and set it to: '^/store_id=2154$' (quotes included)
Then set the Target to: http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
Then for the URL Type I checked Fixed URL
When I tested with: http://www.oldsite.com/store/store.html?store_id=2154 it did redirect as desired
BUT
When I tested with: "http://www.oldsite.com/store/store.html?store_id=5555" it too got redirected to the Target and I can't figure out how this second URL can satisfy the condition to get redirected.
Any help is most appreciated.

thanks for choosing sun web server 7
it is simpler if you just edit the configuration files manually
cd <ws7-install-root>/https-<hostname>/config/
edit obj.conf or <hostname>-obj.conf (if there is one for you depending on your configuration so that it look something like)
<Object name="default">
AuthTrans..
#add the folllowing line here
<If defined $query>
<If $urlhost =~ "/oldsite.com" and
$uri =~ "/store/store.html" and
$query =~ "store_id=2154" >
NameTrans fn="redirect" from="/" http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
</If>
</If>
..rest of the existing obj.conf. continues
NameTrans...
now, you can either do <ws7-install-root>/https-<hostname>/bin/reconfig -> to reload your configuration without any server downtime or <ws7-install-root>/https-<hostname>/bin/restart -> to restart the server
if it did work out for your, you will need to run the following so that admin server is aware of what you just did
<ws7-install-root>/bin/wadm pull-config user=admin config=<hostname> <hostname.domainname>
hope this helps

URL redirection config in PI SOAP receiver communication channel

Hi,
I am working on a similar scenario where I my consuming an external web service using https protocol from PI.
I have configured a soap receiver channel to call the target url of this web service as https://portal.xyz.org.uk/webservice_alt.
I am getting an error HTTP 302 suggesting that PI is not able to follow the re-direction to the target URL as the service resides not on that URL but on https://portal1.xyz.org.uk/webservice_alt or https://portal2.xyz.org.uk/webservice_alt.
This is their server fail over handling mechanism which is very common. But PI 7.0 is not able to handle this.
So if I change the target URL on the SOAP receiver channel to https://portal1.xyz.org.uk/web service or https://portal2.xyz.org.uk/webservice_alt , PI works fine without errors . But this is not the right approach because, every time the web service provider takes one of these systems down for upgrade/patching etc, they inform us and then I manually go and change the target URL to the available server on my production PI system config.
My problem is I want to resolve this redirection error in PI. I have tried raising a call with SAP itself and they pointed out to use Axis adapter which is still not working.
So I am here asking for help. any suggestions please from the experts?
Thanks
Jhansi.

Hi guys,
I am sorry if I have not been clear so far!!
What I am talking about is a URL redirection capability of PI. what i mean is , when you call any service in general using a browser/soap ui etc, it pings that url and follows the redirection.
For example when i try to test this external web service directly using soap ui tool, it also returns HTTP 302 error. But when I set the 'Follow redirect' property to 'true' , it follows the redirection and calls the service on 'portal1' or 'portal2' .
You assume PI is a test tool like SOAPUI. When the address or URL changed in WSDL and if you load the latest WSDL in soapUI it post the request to the latest URL. YOu import WSDL only in ESR not in IR. Dont forget it. Though WSDL has soap address location, it will not impact the wsdl changes directly in ID.
It makes no sense to complain regarding the behaviour of PI when the reason for the problem is outside (WS provider).
please note that the target url is fixed which is https://portal.xyz.org.uk/webservice_alt.
so we are not talking here about the service provider altering the service and sending us new wsdl's etc.
All users of this webservice have been non-sap users so far and consumers use java, .net etc platforms and are easily able to handle the redirection.because this redirection is a part of failover mechanism.
I hope i am able to picture my problem.
thanks
Jhansi.

ISE & Switch URL redirect not working

Dear team,
I'm setting up Guest portal for Wired user. Everything seems to be okay, the PC is get MAB authz success, ISE push URL redirect to switch. The only problem is when I open browser, it is not redirected.
Here is some output from my 3560C:
Cisco IOS Software, C3560C Software (C3560c405-UNIVERSALK9-M), Version 12.2(55)EX3
SW3560C-LAB#sh auth sess int f0/3
            Interface: FastEthernet0/3
          MAC Address: f0de.f180.13b8
           IP Address: 10.0.93.202
            User-Name: F0-DE-F1-80-13-B8
               Status: Authz Success
               Domain: DATA
      Security Policy: Should Secure
      Security Status: Unsecure
       Oper host mode: multi-domain
     Oper control dir: both
        Authorized By: Authentication Server
           Vlan Group: N/A
     URL Redirect ACL: redirect
         URL Redirect: https://BYODISE.byod.com:8443/guestportal/gateway?sessionId=0A005DF40000000D0010E23A&action=cwa
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: 0A005DF40000000D0010E23A
      Acct Session ID: 0x00000011
               Handle: 0xD700000D
Runnable methods list:
       Method   State
       mab      Authc Success
SW3560C-LAB#sh epm sess summary
EPM Session Information
Total sessions seen so far : 10
Total active sessions      : 1
Interface            IP Address   MAC Address       Audit Session Id:
FastEthernet0/3       10.0.93.202 f0de.f180.13b8    0A005DF40000000D0010E23A
Could you please help to explore the problem? Thank you very much.

With switch IOS version later than 15.0 the default interface ACL is not required. For url redirection the dACL is not required as this ACL is part of traffic restrict for "guest" users.
In my experiece some users can not get the redirect correctly because anti-spoof ACL on management Vlan or stateful firewall blocks the TCP syn ack.
It is rare in campus network access layer switches have user SVI configured so the redirect traffic has to be sent from the netman SVI, but trickly the TCP SYN ACK from the HTTP server will be sent back from the netman Vlan without source IP changed. (The switch is spoofing the source IP in my understanding with changing only the MAC address of the packet). In most of the cases there should be a basic ACL resides on the netman SVI on the first hop router, where the TCP SYN ACK may be dropped by the ACL.
tips:
1. "debug epm redirect" can make sure your traffic matches the redirect url and will get intercepted by the switch
2. It will be an ACL or firewall issue if you can see epm is redirecting your http request but can not see the SYN ACK from the requested server.
Which can win the race: increasing bandwidth with new technologies VS QoS?

ISE Wired Central Web Authentication no url redirect

We are setting up ISE for wired guest accest but are having trouble with the client being redirected. The switch gets the download from ISE and shows that it should use the URL redirect with the correct ACL.
ISEtest3560#show authentication sessions interface fastEthernet 0/2
            Interface: FastEthernet0/2
          MAC Address: 001d.09cb.78bd
           IP Address: Unknown
            User-Name: 00-1D-09-CB-78-BD
               Status: Authz Success
               Domain: DATA
      Security Policy: Should Secure
      Security Status: Unsecure
       Oper host mode: multi-auth
     Oper control dir: both
        Authorized By: Authentication Server
           Vlan Group: N/A
              ACS ACL: xACSACLx-IP-ISE-Only-52434fbe
     URL Redirect ACL: ACL-WEBAUTH-REDIRECT
         URL Redirect: https://REMOVED.Domain.corp:8443/guestportal/gateway?sessionId=0A0003E600000039064485B1&action=cwa
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: 0A0003E600000039064485B1
      Acct Session ID: 0x00000293
               Handle: 0x95000039
Runnable methods list:
       Method   State
       dot1x    Failed over
       mab      Authc Success
From the client pc I can get name resolution for anything I ping. I also can ping the ise server by name. The ACL that is downloaded it as follows:
Extended IP access list xACSACLx-IP-ISE-Only-52434fbe (per-user)
    10 permit udp any eq bootpc any eq bootps
    20 permit udp any any eq domain
    30 permit ip any host 10.4.37.91
    40 deny ip any any log
Extended IP access list ACL-WEBAUTH-REDIRECT
    10 deny udp any eq bootpc any eq bootps
    20 deny udp any any eq domain
    30 deny ip any host 10.4.37.91
    40 permit tcp any any eq www (13 matches)
    50 permit tcp any any eq 443
    51 permit tcp any any eq 8443
    60 deny ip any any
The machine passes the Authentication with MAB and hits the CWA Authorization profile, ISE shows the cient as "Pending" then the next entry above that is the log is the dACL getting pushed to the switch. Could part of the issue be that the device shows Unknown for IP address? The command ip device tracking is in the swtich:
ISEtest3560#show running-config | include tracking
ip device tracking
ISEtest3560#
We have 802.1x clients working and the IP address for those do show up..
Please advise,
Thanks,
Joe

ISEtest3560#show ip access-lists interface fastEthernet 0/2
ISEtest3560#
Doesn't appear the dacl is being applied.
interface FastEthernet0/2
switchport access vlan 11
switchport mode access
ip access-group ACL-DEFAULT in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 999
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab webauth
authentication priority dot1x mab webauth
authentication port-control auto
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
spanning-tree guard root
Extended IP access list ACL-DEFAULT
    10 permit udp any eq bootpc any eq bootps
    20 permit udp any any eq domain
    30 permit icmp any any
    40 permit udp any any eq tftp
    41 permit ip any host 10.4.37.91
    50 deny ip any any log (1059 matches)
Could the dACL being causing the issue with the Unknown, or is the Unknow causing the issue with the dACL?
Thanks,
Joe

ISE CWA FLEXCONNECT - No url redirect

Hi,
I'm setting up a LAB environment for CWA with ISE(1.2.1), vWLC(8.0.100), ASA5505(9.1.X) and a 2602 AP in flexconnect mode.
Unfortunately I'm running into problems.
The AP, WLC and ISE is all running in vlan 1 which terminates in the 5505 as a inside interface.
Vlan 2 is a guest network terminating on a separate interface in the ASA.
The problem that I'm facing is that the url-redirect from the ISE dosent' work. If i check the client summery on the vWLC I can see that the client get applyes the redirect flexconnect ACL and that the URL is present. I've verified that it's not a DNS issue and I'm able to manually connect to ISE so there is no ACL blocking me. The client just dosen't get the redirect. I've tired with multiple devices (windows,ios,android) and it's all the same.
I've followed the following guides:
http://www.drchaos.com/flexconnect-local-switching-guestbyod/
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116087-configure-cwa-wlc-ise-00.html#anc11
Currently I'm at work but I can provide some debug output later.
Have anyone seen this behavior before?

It is possible that you are hitting the following bug:
https://tools.cisco.com/bugsearch/bug/CSCue68065
One thing this bug does not mention is that there is another resolution outside of disabling local switching. The alternative is:
1. Create a standar ACL on the controller that is named exactly as the FlexConnect ACLs
2. The standard ACL does not have to have any ACE in it
I have ran into this issue before and the above workaround has worked for me. The issue was supposed be addressed in version 8.x of the WLC but I think it is still worth giving it a try.
Thank you for rating helpful posts!

Does using self-signed cert. on ISE server has anthing to do with url redirect being not working

Hi,
I am setting up wired ISE environment. Everything is going fine, except url redirect is not working.
I just wondering, if using self-signed certificate on ISE server has anothing to do with the problem ?.
Appreciate your input.
Thanks

Hi,
As long as you have not changed the hostname or the domain name (and dns is accurate). You should only receive the certificate warning but still get redirected without any issues.
Thanks,
Tarik Admani
*Please rate helpful posts*

How does ISE choose which IP to put in URL redirect response?

Hello,
does anyone know how does ISE choose which IP to put in URL redirect response if it has more than one interface with an IP address and all interfaces are enabled in the portal configuration?
I have a single ISE 1.3 PSN with all four interfaces configured, enabled, each on unique VLAN, and each with unique IP address.
In the CWA portal configuration, all four interfaces are enabled.
Wired clients connect to NAD, NAD sends RADIUS request to ISE, ISE responds with a RADIUS response including the URL-Redirect parameter which specifies the web redirect URL. ISE configuration uses "ip:port" in the URL.
My question is how does ISE choose which of its four interfaces to put in this URL? Is it always the same interface that RADIUS packets were received on? Or does it always choose the first portal enabled interface? Or is there another logic? Configurable or unconfigurable?
Thanks!

ISE uses the first interface enabled for that portal, so if want to use a specific interface, then only enable that interface. If interface is GE0, then default behavior is to redirect with ip value set to node's FQDN. If interface other than GE0, then default behavior is to return the IP address of the associated interface.
Aliases can be configured for each interface using the CLI 'ip host' command to associate a hostname/FQDN to the IP address of a given interface. When configured, ISE will return that value rather than IP address in redirect. This is critical if want to avoid certificate trust warning on connecting clients.
Be sure that certificate assigned to interface includes the correct FQDN or optionally wilcard value in the CN or SAN fields to avoid cert warnings.

Ise: Url redirection not working

everything should be ok on ise and switch
the switch is configured with its own ip on the vlan (22)
PS is on vlan (44)
and ise is configured for web authentication policy to occurr on the logon vlan (33)
the service is reachable by inputting the policy service ip address on port 8443, authentication is successful, acl downloaded and redirect url pushed properly to the switch but redirect never occurrs,
instead a blank page (host not reachable) is displayed
the clients on vlan 33 can resolve dns without problems
the firewall has been set to make the vlan 44 and 33 talk each other on port 80,443,8443
it looks like the switch's http/s-server is not making any difference maybe because it is on another vlan though it is routed
can someone help me?
i would really appreciate a flow chart on how web redirect works in ise and tge role of the http server
ps the switch does not support the ip route command

however not everithing is working as it should, sometimes the acl are not pushed properly and the redirect acl does not show any hit (often), sometimes the centralwebauth acl is not pushed properly and the show ip access list interface results in blank output
interface GigabitEthernet1/0/10
description Porte dot1x - voip ISE
switchport access vlan 300
switchport mode access
switchport voice vlan 818
ip access-group ACL-ALLOW in
srr-queue bandwidth share 1 30 35 5
queue-set 2
priority-queue out
authentication event fail action next-method
authentication event server dead action authorize vlan 300
authentication event server alive action reinitialize
authentication host-mode multi-domain
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
mls qos trust cos
dot1x pae authenticator
dot1x timeout tx-period 10
auto qos trust
spanning-tree portfast
spanning-tree bpduguard enable
end
the show auth sessiond for the interface is
            Interface: GigabitEthernet1/0/10
          MAC Address: 20cf.3017.645b
           IP Address: 172.31.105.132
            User-Name: 20-CF-30-17-64-5B
               Status: Authz Success
               Domain: DATA
       Oper host mode: multi-domain
     Oper control dir: both
        Authorized By: Authentication Server
          Vlan Policy: 300
              ACS ACL: xACSACLx-IP-CentralWebAuth-5062f332
     URL Redirect ACL: redirect
         URL Redirect: https://ISEC3395.omitted.omitted:8443/guestportal/gateway?sessionId=AC1F552F0000000A001A6FD2&action=cwa
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: AC1F552F0000000A001A6FD2
      Acct Session ID: 0x0000000D
               Handle: 0x7C00000A

ISE Url Redirecting

HI,
I have a layer 3 ISE policy node configuration with my asa for remote access vpn configuration.
my user gets authenticated but when i open the web-browser the the url redirect doesnt happen. i have to manually do this.
is there something which i am missing? please let me know?
any help or ideas will be helpful.
thanks
Nitesh

Nitesh,
In the WLC make sure you have it set to "Redirect to External Server", also, almost always, its a problem with how you have your ACLs configured, because you want to "Force redirection to ISE Guest Server" by using the ACLs, therefore, you must have a redirect ACL in place.

Is Java Webdynpro Appl deployable in WAS6.20 or URL redirection frm EP6 to7

Hi All,
We have two portals, one ep 6 and another ep 7. we have developed a small webdynpro appl and it is working in ep 7, but we want it to be in EP6, our ep 6 is based on WAS 6.20. So, Can we deploy Webdynpro java application in EP 6 based on WAS 6.20. If not, can we provide a url redirect to that particular iview from EP 6 to EP 7.
Please help us, if anybody has any idea on this...
Thanks & Regards,
Ravi

The system object can be created from system administration role in portal System_admin_role or assign your self super_admin_role in the portal EP6.
Then Go to System Configuration -->Portal Content and there create a system object of type "Sap system with load balancing" after that set Authentication Ticket Type as SAP Logon Ticket, Define Logon Method as SAPLOGONTICKET, Set Message Server of your Java Stack,Remote Host Type as 3,
Set Web AS Host Name with port no > = 50000 ie Java Stack .
System Object name for eacch env can be env specific/different ie DEV, QAL, PRD etc
but create the System alias for the system object created above and keep its name same accross all the env eg (JVA) and use this alias in your ivew for defining system.
Using URL Ivew will work too, but the problem with that is , you will have to do manual config (change server id or URL) in each env to reflect the application of the env in which ivew will be.
Where as using webdynpro Java ivew you will not hardcode the url , and define system as system alias in the iveiw and when ivew get transported to diff env , alias will connect it to the env specific system object.
Edited by: Saurabh Agrawal on Apr 2, 2009 2:27 AM

How to set an item when I redirect using OWA_UTIL.redirect_url

I am using OWA_UTIL.redirect_url to redirect users.
but I am lost in how do I set an item doing this. I have an item called :P101_MSG and I want to set it to 1.
I added &:P101_MSG=1 this: OWA_UTIL.redirect_url ('f?p=&APP_ID.:101:&SESSION.*&:P101_MSG=1* ');
but that was wrong.
Can someone tell me the syntax to set P101_MSG=1 when I redirect.
Howard

Hi
I'm not quite sure of what you're doing or where you are but this isn't how you set APEX items in the URL.
See this example
f?p=:&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.::::P1_ITEM1,P1_ITEM2:A,BThis sets item1 = A and item 2 = B.
Is this what you mean (make sue you get the number of colons correct...
Cheers
Ben

Setting SYSDATE in as URL Redirect

Similar Messages

Maybe you are looking for