Setting Target Client in STMS- Import Queue

After restoring Db,we has some issues in Transport Routes so deleted and added the child system to Transport Domain Controller.
After adding the system, if we go to STMS->Import Overview-> QAS ( system queue name )-> here it asking to set the target client.
My issue is..when i click on " Set Target Client", it is ready to import all the transports...
Can i exclude importing all the transports and set the target client ?
Thank you

Hi NIA,
As mentioned by Sunny, you just have to add the NEW QAS system in the Domain.
Go to transport routes and then from "Configuration"-> "Adjust with Controller".
This will adjust the system with the Domain Controller.
Regards,
Anuj

Similar Messages

STMS Import queue Fails - FTP_FAILED

Hi All
Stms import queue fails with the following error message
System   BWP              Command TMS_MGR_TRANSMIT_TR_QUEUE
Client   001                   Service Transport Service
User     SAPBASIS        Start    Online
Date     14.05.2009        Function TMS_TP_ADD2BUFFER
Time     11:48:34           Message FTP_FAILED
Source file could not be opened
long text
========
An error occurred when opening the source file for reading.
File name: R901010.BWE
Directory: $TR_DATA
Error code: 16
Definition of the error codes:
03   RFC system failure
04   RFC communication failure
11   invalid EPS subdirectory
12   sapgparam failed
13   build directory failed
14   no authorization
15   build path failed
16   open failed
17   read directory failed
18   read attributes failed
System Response
Transmission was terminated.
Procedure
Eliminate the cause of the error and restart the transmission
==========
suggesstions please
Edited by: Harendranath Medarametla on May 14, 2009 11:59 AM

Hi Saurabh,
I am able to FTP files manually between servers.
START TRANSMIT BUFFER ENTR BWP g      20090511092623              TMSADM       smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090511092638              TMSADM       smuc021
START TRANSMIT BUFFER ENTR BWP g      20090512152143              MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152159              MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g      20090512152251              TMSADM       smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152307              TMSADM       smuc021
START TRANSMIT BUFFER ENTR BWP g      20090512152321              MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152338              MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g      20090512171040              TMSADM       smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171056              TMSADM       smuc021
START TRANSMIT BUFFER ENTR BWP g      20090512171405              TMSADM       smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171421              TMSADM       smuc021
START TRANSMIT BUFFER ENTR BWP g      20090512171429              MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171446              MEDARAMETLAH smuc021
START CMDIMPORT            BWP L      20090512172121              MEDARAMETLAH smuc021 20090512172120681
STOP CMDIMPORT            BWP L      20090512172123              MEDARAMETLAH smuc021 20090512172120681
START MAIN IMPORT          BWP I      20090512172124              MEDARAMETLAH smuc021 20090512172123291
STOP MAIN IMPORT          BWP I      20090512172139              MEDARAMETLAH smuc021 20090512172123291
START CMDIMPORT            BWP L      20090512172139              MEDARAMETLAH smuc021 20090512172139056
STOP CMDIMPORT            BWP L      20090512172343              MEDARAMETLAH smuc021 20090512172139056
START CREATE VERSIONS BEFO BWP w      20090512173112              MEDARAMETLAH smuc021
START tp_getprots          BWP W      20090512173112              MEDARAMETLAH smuc021
STOP tp_getprots          BWP W      20090512173322              MEDARAMETLAH smuc021
STOP CREATE VERSIONS BEFO BWP w      20090512173322              MEDARAMETLAH smuc021
START DD IMPORT            BWP H      20090512173623              MEDARAMETLAH smuc021 20090512173622926
STOP DD IMPORT            BWP H      20090512173855              MEDARAMETLAH smuc021 20090512173622926
START DD ACTIVATION        BWP A      20090512173905              MEDARAMETLAH smuc021
START tp_getprots          BWP J      20090512173905              MEDARAMETLAH smuc021
STOP tp_getprots          BWP J      20090512174100              MEDARAMETLAH smuc021
STOP DD ACTIVATION        BWP A      20090512174100              MEDARAMETLAH smuc021
START imp all              BWP        20090512174101              MEDARAMETLAH smuc021 20090512174100971
INFO: event SAP_IMPORT_START triggered successfully
START CMDIMPORT            BWP L      20090512174102              MEDARAMETLAH smuc021 20090512174100971
STOP CMDIMPORT            BWP L      20090512174102              MEDARAMETLAH smuc021 20090512174100971
START DD IMPORT            BWP H      20090512174103              MEDARAMETLAH smuc021 20090512174100971
STOP DD IMPORT            BWP H      20090512174103              MEDARAMETLAH smuc021 20090512174100971
START DISTRIBUTION OF DD-O BWP S      20090512174103              MEDARAMETLAH smuc021 20090512174100971
START tp_getprots          BWP S      20090512174103              MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots          BWP S      20090512174118              MEDARAMETLAH smuc021 20090512174100971
STOP DISTRIBUTION OF DD-O BWP S      20090512174118              MEDARAMETLAH smuc021 20090512174100971
INFO TBATG CONVERSION OF BWP N      not needed                  MEDARAMETLAH smuc021 20090512174100971
START MOVE NAMETABS        BWP 6      20090512174118              MEDARAMETLAH smuc021 20090512174100971
START tp_getprots          BWP P      20090512174118              MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots          BWP P      20090512174223              MEDARAMETLAH smuc021 20090512174100971
STOP MOVE NAMETABS        BWP 6      20090512174223              MEDARAMETLAH smuc021 20090512174100971
START MAIN IMPORT          BWP I      20090512174224              MEDARAMETLAH smuc021 20090512174100971
STOP MAIN IMPORT          BWP I      20090512204043              MEDARAMETLAH smuc021 20090512174100971
START TBATG CREATION OF EN BWP n      20090512204043              MEDARAMETLAH smuc021 20090512174100971
START tp_getprots          BWP Y      20090512204043              MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots          BWP Y      20090512204053              MEDARAMETLAH smuc021 20090512174100971
STOP TBATG CREATION OF EN BWP n      20090512204053              MEDARAMETLAH smuc021 20090512174100971
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all              BWP   0004 20090512204055              MEDARAMETLAH smuc021 20090512174100971
START EXECUTION OF REPORTS BWP R      20090512204200              MEDARAMETLAH smuc021
START tp_getprots          BWP R      20090512204200              MEDARAMETLAH smuc021
STOP tp_getprots          BWP R      20090512205837              MEDARAMETLAH smuc021
STOP EXECUTION OF REPORTS BWP R      20090512205837              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205840              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205840              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205840              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205840              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205840              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205841              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205841              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205841              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205841              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205842              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205842              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205842              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205842              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205842              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205843              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205843              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205843              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205843              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205844              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205844              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205844              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205844              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205844              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205845              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205845              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205845              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205845              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205846              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205846              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205846              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205846              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205846              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205847              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205847              MEDARAMETLAH smuc021
START tp_rm_cntl_mark      BWP        20090512205847              MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark      BWP        20090512205847              MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g      20090513095342              MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095359              MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g      20090513095701              TMSADM       smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095718              TMSADM       smuc021
START TRANSMIT BUFFER ENTR BWP g      20090513095723              MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095740              MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g      20090513100151              TMSADM       smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513100208              TMSADM       smuc021
START TRANSMIT BUFFER ENTR BWP g      20090513100213              MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513100231              MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g      20090513100238              TMSADM       STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513103804              TMSADM       smuc021
START TRANSMIT BUFFER ENTR BWP g      20090513103833              MEDARAMETLAH START TRANSMIT BUFFER ENTR BWP g      20090513115655              MEYERA       smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513115713              MEYERA       smuc021
INFO: Buffer saved as
smuc021\sapmnt\trans\buffer\BWPSAV.
======================
also please see the error when i try to connect using TP command in os
This is tp version 372.04.40 (release 700, unicode enabled)
Connection to Database of BWP was successful.
This is R3trans.exe version 6.14 (release 700 - 16.10.08 - 16:26:00).
unicode enabled version
2EETW152 Cannot open file "
SMUC013\sapmnt\trans\tmp\C090514.BWP".
R3trans.exe finished (0012).
SMUC013\sapmnt\trans\log\C090514.BWP for transport: ALL: Permission denied
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (1)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (1), I'm waiting 1
sec (20090514174859). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (2)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (2), I'm waiting 3
sec (20090514174900). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (3)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (3), I'm waiting 1
sec (20090514174903). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (4)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (4), I'm waiting 5
sec (20090514174904). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (5)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (5), I'm waiting 3
sec (20090514174909). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (6)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (6), I'm waiting 3
sec (20090514174912). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (7)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (7), I'm waiting 2
sec (20090514174915). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (8)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (8), I'm waiting 5
sec (20090514174917). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (9)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (9), I'm waiting 5
sec (20090514174922). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (10)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (10), I'm waiting
4 sec (20090514174927). My name: pid 4340 on smuc021 (bwpadm)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC: Permission denied
PANIC --> exiting
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see dev_tp or SLOG0920.BWP for more details
I have 4 system lanscape but other systems dont have this problem, even i have not maintained any permissions.
regards
hari

STMS - Import Queue not updating

Hi,
I'm hoping for a little guidance to track down a problem.
We have a simple 3 system configuration (DEV > QAS > PROD) and we're currently about 2 months away from going live with the Production box.
However, the STMS import queue for Production hasn't updated since 13/09. It's status is "Data obsolete or missing".
Being a bit of a novice, I'm not sure where to start to try track down why, after 12 months, this queue has stopped updating.
Any help would be appreciated.
Thanks

If the queue is not been updated the most likely scenario is that it can't read the trasnport directory or the STMS config is not maintained properly... what happen when you try to refresh the queue?... any errors?, Check the system status in the domain controller if theres an issue try to redistribute.
Regards
Juan

STMS Import Queue Problem

Hi All,
I need to import an externall request in to my environment.
The problem occur when I following steps:
1) Logon in Dev environment
2) Trx. STMS
3) Import Overview
4) Select Dev Queue
5) Extras->Other Requests->Add
The Add option Menu is disable.
How can I able the Add option menu, please ?
In another hand(Quality and Production) the Add option Menu is able.
Thanks
Regards
Marcos Magalhães

Hi All,
The problem was solved with the following way:
The requests in DEV queue without target client(with red collor) were removed.
After that I updated the dev queue and menu worked fine.
Thanks
everybody!!!
Edited by: Marcos Magalhães on Jan 27, 2010 5:31 PM

Refreshing STMS import queue

Hi All,
I want to know if there is a way (program) that i can use to refresh the import queue in STMS automatically even when the import queue screen is not open. I am experiencing some intresting scenario and i am not sure if its normal. please let me know:
- I have recently added Sandbox system in the already existed TMS landscape. Domain links are used since Sandbox and DEV are in different network. When i release the transport in DEV its supposed to go to QAS import queue and also to Sandbox import queue in parallel. I can see them in QAS queue automatically without refreshing it, however it does not go to the Sandbox queue even after I refresh the import queue of Sanbox system (from Sandbox System). The only way It goes to the Sandbox import queue in Sandbox Queue is when I go the the Import Queue of Sandbox system in DEV system and Refresh it there. Is there normal? After I refresh import queue for Sandbox in DEV , i go to the Sandbox system and click on sandbox queue then refresh it there and it comes right through. I understand the concept of adujst the transport files by clicking the green arrow since they dont share same Central Trans Dir and i am also aware of the SAP report to perform this automatically.
-My question is, Why do is it required to refresh the import queue for Sandbox system "in DEV system" ? and is there any Report/Program that i can schedule in the Background in DEV that refreshes all import queues for all systems there even when the import screen is not open?
please suggest. thanks.

I will put your question in more clear way!!
You are not able to view the transport in SANDBOX STMS(Auto refersh is active) untill you refresh from DEV STMS ...Is this ?? I dont think it should happen you are accesing the same screen from DEV or SANDBOX.
Just try what i have mentioned above
1) In sandbox select personal setting and do as per firt post
2) Release any request in DEV (Dont open STMS in DEV system )
3) Check if transport is available in SANDBOX STMS(Login to SANDBOX only)
Paste here the observations....
Regards,

STMS import queue

HI all,
Think some body deleted TR request (or something happend in the import queue) from the import queue, from that day onwards there was no transports are going on from development to quality systems. is there any chance to rebuild import queues, it was a problem in STMS imports.
pls help me.
cheers,

Did you refresh the list with refresh button?
If yes, check release log of that particular transport.
Hope it helps.
Regards

Short text problem in import queue (STMS)

hello,
I have a problem with the short text in the import queue on STMS,.
The short text no longer appears on new request, but still appear on import history.
would anyone help me with this matter?
Anthony P.

This topic already discussed many times. If you search on SDN you will get the answer.
Unde stms import queue there is a icon personal setting --> under other setting make sure the read missing texts from data file is ticked.

Need to delete the SPAM requests from the import queue

Dear all,
There were some issues with my QA system SAP patch application and we were forced to do a DB refresh from our production system. Now our QA system ABAP stack is having an issue with the STMS import queue which shows 4 old patches(witch were applied to the system before the refresh) with u201Crequest will not be importedu201D status. When I try to delete these requests from the import queue it shows the following error
u201CThis is tp version 372.04.29 (release 700, unicode enabled)
ERROR: Client 'ALL' is not possible.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0246
standard output from tp and from tools called by tpu201D
When I try to import a new support package it gives the following error,
Error in phase: CHECK_REQUIREMENTS
Reason for error: QUEUE_NOT_EMPTY
Not sure how these requests arew still in the import queue even after the DB refresh. How can I delete these 4 old requests from the import queue?
The System is ECC6.0 ABAP+JAVA stack with Oracle 10g on Win2003 server.
Thank you,
Siju Sam

Dear Ganesh,
I have tried the steps you suggested, but still the import queue is not cleared.
Now I just wanted to remove these entires from the STMS=>queue=>import queue list.
Number   Request      Clt   Owner          Short Text
     1   SAPKB70013   ALL   SAPUSER        Basis Support Package 13 for 7.00
     2   SAPKA70013   ALL   SAPUSER        ABA Support Package 13 for 7.00
     3   SAPKB70014   ALL   SAPUSER        Basis Support Package 14 for 7.00
     4   SAPKA70014   ALL   SAPUSER        ABA Support Package 14 for 7.00
I think these requests(Patches) are not there in the tp buffer/(import queue) but somehow some table entries shows the status that they are still in the queue. So I just wanted to reset the status that These TPs are already applied.
Thank you,
Siju Sam

STMS import of transport

Hi Guys,
I'm trying to import a transport during upgrade from dev to quality. I need to have it in 005 quality.
1) Is it necessary to login to the target client 005 or can I directly login to 000 and select target client 005 ?
2) Is it necessary to always import changes in all the clients ?
3) After clicked on the import icon (truck), I select (F4) to see available options for clients. When I do that, it asks me to login to the target client. What might be the problem ? Is some RFC destination configured incorrectly or some parameter ?

Hi,
You must login to the Target client 005 to import the request and clicking the import icon you have select the target client from the list or you may manually enter the client no .
You must enter in to the Target client and import the Request.,
Regards
Arun

STMS: how to hide the Import All Requests button in the import queue view?

Hi All,
I'd like to know how to hide the "Import all requests" button in the import queue view.
Thanks a lot for your answers.
G.

Hi,
about hiding i have a doubt but u can inactivate by following procedure,
As referred in a thread:
On the domain controller, in STMS>overview>systems>(double click the one you want to change)>Select Transport Tool tab and click on change. Add Import_single_only value 1, import_single_strategy value 1 and no_import_all value 1. Save distribute and activate.
or
Refer to OSS NOTE 194000.
Thanks & regards.

Problem STMS: "Copying Import Queue SID "

Hello
I have a quetion, yesterday we changed the name server of production, now when I want to make the tranports I got this message
Copying Import Queue <SID>, I had checked the configuration of stms, RFCs and I did the test and these are ok
In the alert viewer I found this mesage
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: connection to partner 'prod.line-online.com:1823'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
I don`t know Where can I check?
thanks a lot

Hi Danny,
Can u just clear us is the is the problem with transport control program is resolved.
in the above reply u r telling the requests don't load in the queue.
Is that means spool request or transport request. please clear the point.
Also as ur telling in SM21: "Spool is full" ; and another message says: "Run-time error "SPOOL_INTERNAL_ERROR" occurred"
are occurring. Can u just go to those work processes, and analyze the trace file errors(which will be listed in red colour).
if ur having any issues, paste the trace file error log here.
let us know if u have any issues,
Regards,
Ravi

Systems in same transport domain, but PRD import queue is empty

Hi all!
I have previously set up ERP 2005 development and QAS system, and there has been some development and transporting occuring between these two systems. Now I have installed the production system and added it to the transport landscape in STMS. The three system are in the same transport domain and the same transport group. In STMS I have created the Delivery route to the PRD system.
When I check the import queue for the production system, only transports created AFTER the installation of the production system appear in the import queue. Transports created and released from DEV to QAS before the production system was available is not displayed in the queue.I know that I can add single requests to the import queue easily, but that required a lot of manual work and making sure that the transports are added to the queue in the correct sequence.
How can I get all the transports to appear in the PRD system import queue? In AL11 in PRD, I am able to access the TRANS_DIR and I see all the transport requests in the directory.
Regards,
Thomas

Hi Thomas,
"Only transports created AFTER the installation of the production system appear in the import queue." - <b>This is expected</b>
From table E070, you can get a list of all transport imported into QAS system. Sort that list according to the date imported, and save the transport requests into a text file.
Run this below script from production by logging in as <sid>adm.
Provide the transport text file as an input to the script. It will add the transports to queue automatically one by one.
@echo on
set SID=<Prd SID>
set CL=<Client>
set filename=<drive>:\usr\sap\trans\scripts\transports.txt
FOR /F "tokens=1,2* delims=K" %%i in (%filename%) do (
tp addtobuffer %%iK%%j %SID% client%CL% pf=<drive>:\usr\sap\trans\bin\TP_DOMAIN_%%i.PFL >> )
Before running the script, take a backup of the production buffer at the OS level, incase u need to restore it.
Cheers,
Fahad

Need TP command for Add Transport Request to import Queue all at a time

Hi SAP gurus,
Can you tell the o/s or TP command to Add   Transport Request to import Queue all at a time which are available in co files directory   ,
Because I have to add 500- 600 request . For every request I canu2019t do like this STMS_IMPORT -- Extras=> other requests -add--
Thanks and regards
babu

Hi,
You can export list of all transport requests from your DEV system in one shot, from SE09-> Display (provide your required selection criteria) -> Goto -> "Display as List"
You can export these all Transport Requests as Spreadsheet. Then Filter out all your required 400 to 500 Transport Requests.
Now,use another excel sheet to create a file with the list of required transport request Nos only, then concatenate all of them to generate the required TP commands as mentioned below.
The syntax will become as follows:
column1           column2         column3
tp addtobuffer DEVK900123 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900124 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900125 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900126 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900127 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900123 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900124 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900125 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900126 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900127 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
-> Open Notepad and Copy+Paste these three columns & save the text file in the <Drive>:\usr\sap\trans\bin\ folder.
-> Then rename this .txt file to *.bat.
-> open a command prompt and change to the <Drive>:\usr\sap\trans\bin\ folder and run the .bat batch file.
Make sure that object lists of all the Trans. Requests are checked and confirmed for the transport to avoid data incosistency in target system. (e.g. Number Range Object)
Regards,
Bhavik G. Shroff

Problem in client export and import (SCC8)

Hi,
I was asked to copy client 300 data on one AIX server to client 210 on another AIX server.
I have done the client export thru SCC8,
transferred those files to other server thru ftp,
added those requests to the import queue on target server.
As and when the request is added to the import queue, the status is being shown in red. Is there a problem with this.
And when i imported the request it got cancelled and the message in log says
the data file is damaged,but the other request(HPRKX00006) is still running.
It has taken a lot of time,so we deleted the data and cofiles related to the requests
and retransported them from source machine.
Even after that the status of the request is shown in red when added to the import queue, and dosent allow to import because the subsequent request is still running
and gives an error saying the request HPRKX00006 is still running.
Suggest a suitable solution.
pradeep.

Hi,
Is your problem solved. Currently I am facing the same issue.
Please let me know what have you done if the issue is resolved.
Regards
Sharath

Could not read import queue

Dear experts,
We have DEV,QAS & PRD(ON AIX and oracle 9.2) and solman (win2k3 & oracle 10.20 single system TMS).Few days ago we had configured Change request management successfully.As per requirement we had made Domain link between SOLMAN and Domain controller (QAS).Everything was working fine till two days ago when we observed that R/3 systems were not able to read the import queue of SOLMAN.Even solman was not reading its own import queue and giving error TP PROGRAM COULD NOT BE STARTED.checked sharing,permissions,hosts file entry ,service file entry ,rfcs(CALLTP_WindowsNT) but no benefit.But while checking dev_rfc we got the log
* Trace file opened at 20100518 100121 India Standard Time, SAP-REL 700,0,221 RFC-VER U 3 1090073 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: SAPLSTPA (Transaction: )
Called function module: RFC_TP_INTERFACE_VERSION
User: TMSADM (Client: 000)
Destination: CALLTP_WindowsNT (handle: 3, 60566250, {243662DF-DDF4-F173-B81D-001A64656336})
SERVER> RFC Server Session (handle: 1, 95414842, {4BF07341-C79C-00D0-E100-8000AC10013A})
SERVER> Caller host:
SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
SERVER> Called function module: TMS_CI_START_SERVICE
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3339
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456*
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1833
seems to us that TP is not able to resolve host nameas entry is blank .Check RZ10 and tp profile where host name is mentioned.how to resolve this issue.please help me out.
Regards
Rahul

Hi,
Have you tried restarting the SAP system (SOLMAN system) ?
Please check the HOST file on each server whether it also contains "host" entries for other servers.
Also check the below note if applicable in your problem.
[Note 616621 - RFC listener does not start after importing SR3|https://service.sap.com/sap/support/notes/616621]
Regards.
Rajesh Narkhede

Setting Target Client in STMS- Import Queue

Similar Messages

Maybe you are looking for