Setting the Client Count per WLAN and per AP radio
Hi
We use WLC 5508 with 7.4. We tried to set max allowed clients per AP radio to 30 through GUI. We have APs with 80 clients associeted though.
Has anyone else tried this feature?
When entering config wlan max-associated-clients max-clients wlan-id we got
"WLAN/Guest-Lan/remote-lan is enabled.Please disable to configure max associated clients."
GUI doesn't show that message, should it? In GUI, Is it necesary to disable WLAN before too?
Thanks
This is the show wlan output
No, the GUI does some stuff automatically, like disablen/enabling the WLAN when you make the change.
From teh CLI *you* have to do them.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered
Similar Messages
-
Infoview Set the number of objects (max.) per page
Is there a way to set this preference "Set the number of objects (max.) per page" using infoview web.xml or any using any BO Java SDK. Please advice.
I want to set the value using some cofiguration or using java SDK. please advice.Hi
There is:
Log in to InfoView -> Preferences -> Set the number of objects (max.) per page:
This is per user
Kind Regards
Roland Hoeller -
How to set the correct shared pool size and db_buffer_cache using awr
Hi All,
I want to how to set the correct size for shared_pool_size and db_cache_size using shared pool advisory and buffer pool advisory of awr report. I have paste the shared and buffer pool advisory of awr report.
Shared Pool Advisory
* SP: Shared Pool Est LC: Estimated Library Cache Factr: Factor
* Note there is often a 1:Many correlation between a single logical object in the Library Cache, and the physical number of memory objects associated with it. Therefore comparing the number of Lib Cache objects (e.g. in v$librarycache), with the number of Lib Cache Memory Objects is invalid.
Shared Pool Size(M) SP Size Factr Est LC Size (M) Est LC Mem Obj Est LC Time Saved (s) Est LC Time Saved Factr Est LC Load Time (s) Est LC Load Time Factr Est LC Mem Obj Hits (K)
4,096 1.00 471 25,153 184,206 1.00 149 1.00 9,069
4,736 1.16 511 27,328 184,206 1.00 149 1.00 9,766
5,248 1.28 511 27,346 184,206 1.00 149 1.00 9,766
5,760 1.41 511 27,346 184,206 1.00 149 1.00 9,766
6,272 1.53 511 27,346 184,206 1.00 149 1.00 9,766
6,784 1.66 511 27,346 184,206 1.00 149 1.00 9,766
7,296 1.78 511 27,346 184,206 1.00 149 1.00 9,766
7,808 1.91 511 27,346 184,206 1.00 149 1.00 9,766
8,320 2.03 511 27,346 184,206 1.00 149 1.00 9,766
Buffer Pool Advisory
* Only rows with estimated physical reads >0 are displayed
* ordered by Block Size, Buffers For Estimate
P Size for Est (M) Size Factor Buffers (thousands) Est Phys Read Factor Estimated Phys Reads (thousands) Est Phys Read Time Est %DBtime for Rds
D 4,096 0.10 485 1.02 1,002 1 0.00
D 8,192 0.20 970 1.00 987 1 0.00
D 12,288 0.30 1,454 1.00 987 1 0.00
D 16,384 0.40 1,939 1.00 987 1 0.00
D 20,480 0.50 2,424 1.00 987 1 0.00
D 24,576 0.60 2,909 1.00 987 1 0.00
D 28,672 0.70 3,394 1.00 987 1 0.00
D 32,768 0.80 3,878 1.00 987 1 0.00
D 36,864 0.90 4,363 1.00 987 1 0.00
D 40,960 1.00 4,848 1.00 987 1 0.00
D 45,056 1.10 5,333 1.00 987 1 0.00
D 49,152 1.20 5,818 1.00 987 1 0.00
D 53,248 1.30 6,302 1.00 987 1 0.00
D 57,344 1.40 6,787 1.00 987 1 0.00
D 61,440 1.50 7,272 1.00 987 1 0.00
D 65,536 1.60 7,757 1.00 987 1 0.00
D 69,632 1.70 8,242 1.00 987 1 0.00
D 73,728 1.80 8,726 1.00 987 1 0.00
D 77,824 1.90 9,211 1.00 987 1 0.00
D 81,920 2.00 9,696 1.00 987 1 0.00
My shared pool size is 4gb and db_cache_size is 40Gb.
Please help me in configuring the correct size for this.
Thanks and Regards,Hi ,
Actually batch load is taking too much time.
Please find below the 1 hr awr report
Snap Id Snap Time Sessions Cursors/Session
Begin Snap: 6557 27-Nov-11 16:00:06 126 1.3
End Snap: 6558 27-Nov-11 17:00:17 130 1.6
Elapsed: 60.17 (mins)
DB Time: 34.00 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: 40,960M 40,960M Std Block Size: 8K
Shared Pool Size: 4,096M 4,096M Log Buffer: 25,908K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 0.6 1.4 0.00 0.07
DB CPU(s): 0.5 1.2 0.00 0.06
Redo size: 281,296.9 698,483.4
Logical reads: 20,545.6 51,016.4
Block changes: 1,879.5 4,667.0
Physical reads: 123.7 307.2
Physical writes: 66.4 164.8
User calls: 8.2 20.4
Parses: 309.4 768.4
Hard parses: 8.5 21.2
W/A MB processed: 1.7 4.3
Logons: 0.7 1.6
Executes: 1,235.9 3,068.7
Rollbacks: 0.0 0.0
Transactions: 0.4
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.66 In-memory Sort %: 100.00
Library Hit %: 99.19 Soft Parse %: 97.25
Execute to Parse %: 74.96 Latch Hit %: 99.97
Parse CPU to Parse Elapsd %: 92.41 % Non-Parse CPU: 98.65
Shared Pool Statistics
Begin End
Memory Usage %: 80.33 82.01
% SQL with executions>1: 90.90 86.48
% Memory for SQL w/exec>1: 90.10 86.89
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
DB CPU 1,789 87.72
db file sequential read 27,531 50 2 2.45 User I/O
db file scattered read 26,322 30 1 1.47 User I/O
row cache lock 1,798 20 11 0.96 Concurrency
OJVM: Generic 36 15 421 0.74 Other
Host CPU (CPUs: 24 Cores: 12 Sockets: )
Load Average Begin Load Average End %User %System %WIO %Idle
0.58 1.50 2.8 0.7 0.1 96.6
Instance CPU
%Total CPU %Busy CPU %DB time waiting for CPU (Resource Manager)
2.2 63.6 0.0
Memory Statistics
Begin End
Host Mem (MB): 131,072.0 131,072.0
SGA use (MB): 50,971.4 50,971.4
PGA use (MB): 545.5 1,066.3
% Host Mem used for SGA+PGA: 39.30 39.70
RAC Statistics
Begin End
Number of Instances: 2 2
Global Cache Load Profile
Per Second Per Transaction
Global Cache blocks received: 3.09 7.68
Global Cache blocks served: 1.86 4.62
GCS/GES messages received: 78.64 195.27
GCS/GES messages sent: 53.82 133.65
DBWR Fusion writes: 0.52 1.30
Estd Interconnect traffic (KB) 65.50
Global Cache Efficiency Percentages (Target local+remote 100%)
Buffer access - local cache %: 99.65
Buffer access - remote cache %: 0.02
Buffer access - disk %: 0.34
Global Cache and Enqueue Services - Workload Characteristics
Avg global enqueue get time (ms): 0.0
Avg global cache cr block receive time (ms): 1.7
Avg global cache current block receive time (ms): 1.0
Avg global cache cr block build time (ms): 0.0
Avg global cache cr block send time (ms): 0.0
Global cache log flushes for cr blocks served %: 1.4
Avg global cache cr block flush time (ms): 0.9
Avg global cache current block pin time (ms): 0.0
Avg global cache current block send time (ms): 0.0
Global cache log flushes for current blocks served %: 0.1
Avg global cache current block flush time (ms): 0.0
Global Cache and Enqueue Services - Messaging Statistics
Avg message sent queue time (ms): 0.0
Avg message sent queue time on ksxp (ms): 0.4
Avg message received queue time (ms): 0.5
Avg GCS message process time (ms): 0.0
Avg GES message process time (ms): 0.0
% of direct sent messages: 79.13
% of indirect sent messages: 17.10
% of flow controlled messages: 3.77
Cluster Interconnect
Begin End
Interface IP Address Pub Source IP Pub Src
en9 10.51.10.61 N Oracle Cluster Repository
Main Report
* Report Summary
* Wait Events Statistics
* SQL Statistics
* Instance Activity Statistics
* IO Stats
* Buffer Pool Statistics
* Advisory Statistics
* Wait Statistics
* Undo Statistics
* Latch Statistics
* Segment Statistics
* Dictionary Cache Statistics
* Library Cache Statistics
* Memory Statistics
* Streams Statistics
* Resource Limit Statistics
* Shared Server Statistics
* init.ora Parameters
More RAC Statistics
* RAC Report Summary
* Global Messaging Statistics
* Global CR Served Stats
* Global CURRENT Served Stats
* Global Cache Transfer Stats
* Interconnect Stats
* Dynamic Remastering Statistics
Back to Top
Statistic Name Time (s) % of DB Time
sql execute elapsed time 1,925.20 94.38
DB CPU 1,789.38 87.72
connection management call elapsed time 99.65 4.89
PL/SQL execution elapsed time 89.81 4.40
parse time elapsed 46.32 2.27
hard parse elapsed time 25.01 1.23
Java execution elapsed time 21.24 1.04
PL/SQL compilation elapsed time 11.92 0.58
failed parse elapsed time 9.37 0.46
hard parse (sharing criteria) elapsed time 8.71 0.43
sequence load elapsed time 0.06 0.00
repeated bind elapsed time 0.02 0.00
hard parse (bind mismatch) elapsed time 0.01 0.00
DB time 2,039.77
background elapsed time 122.00
background cpu time 113.42
Statistic Value End Value
NUM_LCPUS 0
NUM_VCPUS 0
AVG_BUSY_TIME 12,339
AVG_IDLE_TIME 348,838
AVG_IOWAIT_TIME 221
AVG_SYS_TIME 2,274
AVG_USER_TIME 9,944
BUSY_TIME 299,090
IDLE_TIME 8,375,051
IOWAIT_TIME 6,820
SYS_TIME 57,512
USER_TIME 241,578
LOAD 1 2
OS_CPU_WAIT_TIME 312,200
PHYSICAL_MEMORY_BYTES 137,438,953,472
NUM_CPUS 24
NUM_CPU_CORES 12
GLOBAL_RECEIVE_SIZE_MAX 1,310,720
GLOBAL_SEND_SIZE_MAX 1,310,720
TCP_RECEIVE_SIZE_DEFAULT 16,384
TCP_RECEIVE_SIZE_MAX 9,223,372,036,854,775,807
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 9,223,372,036,854,775,807
TCP_SEND_SIZE_MIN 4,096
Back to Wait Events Statistics
Back to Top
Operating System Statistics - Detail
Snap Time Load %busy %user %sys %idle %iowait
27-Nov 16:00:06 0.58
27-Nov 17:00:17 1.50 3.45 2.79 0.66 96.55 0.08
Back to Wait Events Statistics
Back to Top
Foreground Wait Class
* s - second, ms - millisecond - 1000th of a second
* ordered by wait time desc, waits desc
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
* Captured Time accounts for 95.7% of Total DB time 2,039.77 (s)
* Total FG Wait Time: 163.14 (s) DB CPU time: 1,789.38 (s)
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) %DB time
DB CPU 1,789 87.72
User I/O 61,229 0 92 1 4.49
Other 102,743 40 31 0 1.50
Concurrency 3,169 10 24 7 1.16
Cluster 58,920 0 11 0 0.52
System I/O 45,407 0 6 0 0.29
Configuration 107 7 1 5 0.03
Commit 383 0 0 1 0.01
Network 15,275 0 0 0 0.00
Application 52 8 0 0 0.00
Back to Wait Events Statistics
Back to Top
Foreground Wait Events
* s - second, ms - millisecond - 1000th of a second
* Only events with Total Wait Time (s) >= .001 are shown
* ordered by wait time desc, waits desc (idle events last)
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % DB time
db file sequential read 27,531 0 50 2 18.93 2.45
db file scattered read 26,322 0 30 1 18.10 1.47
row cache lock 1,798 0 20 11 1.24 0.96
OJVM: Generic 36 42 15 421 0.02 0.74
db file parallel read 394 0 7 19 0.27 0.36
control file sequential read 22,248 0 6 0 15.30 0.28
reliable message 4,439 0 4 1 3.05 0.18
gc current grant busy 7,597 0 3 0 5.22 0.16
PX Deq: Slave Session Stats 2,661 0 3 1 1.83 0.16
DFS lock handle 3,208 0 3 1 2.21 0.16
direct path write temp 4,842 0 3 1 3.33 0.15
library cache load lock 39 0 3 72 0.03 0.14
gc cr multi block request 37,008 0 3 0 25.45 0.14
IPC send completion sync 5,451 0 2 0 3.75 0.10
gc cr block 2-way 4,669 0 2 0 3.21 0.09
enq: PS - contention 3,183 33 1 0 2.19 0.06
gc cr grant 2-way 5,151 0 1 0 3.54 0.06
direct path read temp 1,722 0 1 1 1.18 0.05
gc current block 2-way 1,807 0 1 0 1.24 0.03
os thread startup 6 0 1 108 0.00 0.03
name-service call wait 12 0 1 47 0.01 0.03
PX Deq: Signal ACK RSG 2,046 50 0 0 1.41 0.02
log file switch completion 3 0 0 149 0.00 0.02
rdbms ipc reply 3,610 0 0 0 2.48 0.02
gc current grant 2-way 1,432 0 0 0 0.98 0.02
library cache pin 903 32 0 0 0.62 0.02
PX Deq: reap credit 35,815 100 0 0 24.63 0.01
log file sync 383 0 0 1 0.26 0.01
Disk file operations I/O 405 0 0 0 0.28 0.01
library cache lock 418 3 0 0 0.29 0.01
kfk: async disk IO 23,159 0 0 0 15.93 0.01
gc current block busy 4 0 0 35 0.00 0.01
gc current multi block request 1,206 0 0 0 0.83 0.01
ges message buffer allocation 38,526 0 0 0 26.50 0.00
enq: FB - contention 131 0 0 0 0.09 0.00
undo segment extension 8 100 0 6 0.01 0.00
CSS initialization 8 0 0 6 0.01 0.00
SQL*Net message to client 14,600 0 0 0 10.04 0.00
enq: HW - contention 96 0 0 0 0.07 0.00
CSS operation: action 8 0 0 4 0.01 0.00
gc cr block busy 33 0 0 1 0.02 0.00
latch free 30 0 0 1 0.02 0.00
enq: TM - contention 49 6 0 0 0.03 0.00
enq: JQ - contention 19 100 0 1 0.01 0.00
SQL*Net more data to client 666 0 0 0 0.46 0.00
asynch descriptor resize 3,179 100 0 0 2.19 0.00
latch: shared pool 3 0 0 3 0.00 0.00
CSS operation: query 24 0 0 0 0.02 0.00
PX Deq: Signal ACK EXT 72 0 0 0 0.05 0.00
KJC: Wait for msg sends to complete 269 0 0 0 0.19 0.00
latch: object queue header operation 4 0 0 1 0.00 0.00
gc cr block congested 5 0 0 0 0.00 0.00
utl_file I/O 11 0 0 0 0.01 0.00
enq: TO - contention 3 33 0 0 0.00 0.00
SQL*Net message from client 14,600 0 219,478 15033 10.04
jobq slave wait 7,726 100 3,856 499 5.31
PX Deq: Execution Msg 10,556 19 50 5 7.26
PX Deq: Execute Reply 2,946 31 27 9 2.03
PX Deq: Parse Reply 3,157 35 3 1 2.17
PX Deq: Join ACK 2,976 28 2 1 2.05
PX Deq Credit: send blkd 7 14 0 4 0.00
Back to Wait Events Statistics
Back to Top
Background Wait Events
* ordered by wait time desc, waits desc (idle events last)
* Only events with Total Wait Time (s) >= .001 are shown
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % bg time
os thread startup 140 0 13 90 0.10 10.35
db file parallel write 8,233 0 6 1 5.66 5.08
log file parallel write 3,906 0 6 1 2.69 4.62
log file sequential read 350 0 5 16 0.24 4.49
control file sequential read 13,737 0 5 0 9.45 3.72
DFS lock handle 2,990 27 2 1 2.06 1.43
db file sequential read 921 0 2 2 0.63 1.39
SQL*Net break/reset to client 18 0 1 81 0.01 1.19
control file parallel write 2,455 0 1 1 1.69 1.12
ges lms sync during dynamic remastering and reconfig 24 100 1 50 0.02 0.98
library cache load lock 35 0 1 24 0.02 0.68
ASM file metadata operation 3,483 0 1 0 2.40 0.65
enq: CO - master slave det 1,203 100 1 0 0.83 0.46
kjbdrmcvtq lmon drm quiesce: ping completion 9 0 1 62 0.01 0.46
enq: WF - contention 11 0 0 35 0.01 0.31
CGS wait for IPC msg 32,702 100 0 0 22.49 0.19
gc object scan 28,788 100 0 0 19.80 0.15
row cache lock 535 0 0 0 0.37 0.14
library cache pin 370 55 0 0 0.25 0.12
ksxr poll remote instances 19,119 100 0 0 13.15 0.11
name-service call wait 6 0 0 19 0.00 0.10
gc current block 2-way 304 0 0 0 0.21 0.09
gc cr block 2-way 267 0 0 0 0.18 0.08
gc cr grant 2-way 355 0 0 0 0.24 0.08
ges LMON to get to FTDONE 3 100 0 24 0.00 0.06
enq: CF - contention 145 76 0 0 0.10 0.05
PX Deq: reap credit 8,842 100 0 0 6.08 0.05
reliable message 126 0 0 0 0.09 0.05
db file scattered read 19 0 0 3 0.01 0.05
library cache lock 162 1 0 0 0.11 0.04
latch: shared pool 2 0 0 27 0.00 0.04
Disk file operations I/O 504 0 0 0 0.35 0.04
gc current grant busy 148 0 0 0 0.10 0.04
gcs log flush sync 84 0 0 1 0.06 0.04
ges message buffer allocation 24,934 0 0 0 17.15 0.02
enq: CR - block range reuse ckpt 83 0 0 0 0.06 0.02
latch free 22 0 0 1 0.02 0.02
CSS operation: action 13 0 0 2 0.01 0.02
CSS initialization 4 0 0 6 0.00 0.02
direct path read 1 0 0 21 0.00 0.02
rdbms ipc reply 153 0 0 0 0.11 0.01
db file parallel read 2 0 0 8 0.00 0.01
direct path write 5 0 0 3 0.00 0.01
gc current multi block request 49 0 0 0 0.03 0.01
gc current block busy 5 0 0 2 0.00 0.01
enq: PS - contention 24 50 0 0 0.02 0.01
gc cr multi block request 54 0 0 0 0.04 0.01
ges generic event 1 100 0 10 0.00 0.01
gc current grant 2-way 35 0 0 0 0.02 0.01
kfk: async disk IO 183 0 0 0 0.13 0.01
Log archive I/O 3 0 0 2 0.00 0.01
gc buffer busy acquire 2 0 0 3 0.00 0.00
LGWR wait for redo copy 123 0 0 0 0.08 0.00
IPC send completion sync 18 0 0 0 0.01 0.00
enq: TA - contention 11 0 0 0 0.01 0.00
read by other session 2 0 0 2 0.00 0.00
enq: TM - contention 9 89 0 0 0.01 0.00
latch: ges resource hash list 135 0 0 0 0.09 0.00
PX Deq: Slave Session Stats 12 0 0 0 0.01 0.00
KJC: Wait for msg sends to complete 89 0 0 0 0.06 0.00
enq: TD - KTF dump entries 8 0 0 0 0.01 0.00
enq: US - contention 7 0 0 0 0.00 0.00
CSS operation: query 12 0 0 0 0.01 0.00
enq: TK - Auto Task Serialization 6 100 0 0 0.00 0.00
PX Deq: Signal ACK RSG 24 50 0 0 0.02 0.00
log file single write 6 0 0 0 0.00 0.00
enq: WL - contention 2 100 0 1 0.00 0.00
ADR block file read 13 0 0 0 0.01 0.00
ADR block file write 5 0 0 0 0.00 0.00
latch: object queue header operation 1 0 0 1 0.00 0.00
gc cr block busy 1 0 0 1 0.00 0.00
rdbms ipc message 103,276 67 126,259 1223 71.03
PX Idle Wait 6,467 67 12,719 1967 4.45
wait for unread message on broadcast channel 7,240 100 7,221 997 4.98
gcs remote message 218,809 84 7,213 33 150.49
DIAG idle wait 203,228 95 7,185 35 139.77
shared server idle wait 121 100 3,630 30000 0.08
ASM background timer 3,343 0 3,611 1080 2.30
Space Manager: slave idle wait 723 100 3,610 4993 0.50
heartbeat monitor sleep 722 100 3,610 5000 0.50
ges remote message 73,089 52 3,609 49 50.27
dispatcher timer 66 88 3,608 54660 0.05
pmon timer 1,474 82 3,607 2447 1.01
PING 1,487 19 3,607 2426 1.02
Streams AQ: qmn slave idle wait 125 0 3,594 28754 0.09
Streams AQ: qmn coordinator idle wait 250 50 3,594 14377 0.17
smon timer 18 50 3,505 194740 0.01
JOX Jit Process Sleep 73 100 976 13370 0.05
class slave wait 56 0 605 10806 0.04
KSV master wait 2,215 98 1 0 1.52
SQL*Net message from client 109 0 0 2 0.07
PX Deq: Parse Reply 27 44 0 1 0.02
PX Deq: Join ACK 30 40 0 1 0.02
PX Deq: Execute Reply 20 30 0 0 0.01
Streams AQ: RAC qmn coordinator idle wait 259 100 0 0 0.18
Back to Wait Events Statistics
Back to Top
Wait Event Histogram
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
* % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
* Ordered by Event (idle events last)
% of Waits
Event Total Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 13 100.0
ADR block file write 5 100.0
ADR file lock 6 100.0
ARCH wait for archivelog lock 3 100.0
ASM file metadata operation 3483 99.6 .1 .1 .2
CGS wait for IPC msg 32.7K 100.0
CSS initialization 12 50.0 50.0
CSS operation: action 21 28.6 9.5 61.9
CSS operation: query 36 86.1 5.6 8.3
DFS lock handle 6198 98.6 1.2 .1 .1
Disk file operations I/O 909 95.7 3.6 .7
IPC send completion sync 5469 99.9 .1 .0 .0
KJC: Wait for msg sends to complete 313 100.0
LGWR wait for redo copy 122 100.0
Log archive I/O 3 66.7 33.3
OJVM: Generic 36 55.6 44.4
PX Deq: Signal ACK EXT 72 98.6 1.4
PX Deq: Signal ACK RSG 2070 99.7 .0 .1 .0 .1
PX Deq: Slave Session Stats 2673 99.7 .2 .1 .0
PX Deq: reap credit 44.7K 100.0
SQL*Net break/reset to client 20 95.0 5.0
SQL*Net message to client 14.7K 100.0
SQL*Net more data from client 32 100.0
SQL*Net more data to client 689 100.0
asynch descriptor resize 3387 100.0
buffer busy waits 2 100.0
control file parallel write 2455 96.6 2.2 .6 .6 .1
control file sequential read 36K 99.4 .3 .1 .1 .1 .1 .0
db file parallel read 397 8.8 .8 5.5 12.6 17.4 46.3 8.6
db file parallel write 8233 85.4 10.3 2.3 1.4 .4 .1
db file scattered read 26.3K 79.2 1.5 8.2 10.5 .6 .1 .0
db file sequential read 28.4K 60.2 3.3 18.0 18.1 .3 .1 .0
db file single write 2 100.0
direct path read 2 50.0 50.0
direct path read temp 1722 95.8 2.8 .1 .5 .8 .1
direct path write 6 83.3 16.7
direct path write temp 4842 96.3 2.7 .5 .2 .0 .0 .2
enq: AF - task serialization 1 100.0
enq: CF - contention 145 99.3 .7
enq: CO - master slave det 1203 98.9 .8 .2
enq: CR - block range reuse ckpt 83 100.0
enq: DR - contention 2 100.0
enq: FB - contention 131 100.0
enq: HW - contention 97 100.0
enq: JQ - contention 19 89.5 10.5
enq: JS - job run lock - synchronize 3 100.0
enq: MD - contention 1 100.0
enq: MW - contention 2 100.0
enq: PS - contention 3207 99.5 .4 .1
enq: TA - contention 11 100.0
enq: TD - KTF dump entries 8 100.0
enq: TK - Auto Task Serialization 6 100.0
enq: TM - contention 58 100.0
enq: TO - contention 3 100.0
enq: TQ - DDL contention 1 100.0
enq: TS - contention 1 100.0
enq: UL - contention 1 100.0
enq: US - contention 7 100.0
enq: WF - contention 11 81.8 18.2
enq: WL - contention 2 50.0 50.0
gc buffer busy acquire 2 50.0 50.0
gc cr block 2-way 4934 99.9 .1 .0 .0
gc cr block busy 35 68.6 31.4
gc cr block congested 6 100.0
gc cr disk read 2 100.0
gc cr grant 2-way 4824 100.0 .0
gc cr grant congested 2 100.0
gc cr multi block request 37.1K 99.8 .2 .0 .0 .0 .0 .0
gc current block 2-way 2134 99.9 .0 .0
gc current block busy 7 14.3 14.3 14.3 28.6 28.6
gc current block congested 2 100.0
gc current grant 2-way 1337 99.9 .1
gc current grant busy 7123 99.2 .2 .2 .0 .0 .3 .1
gc current grant congested 2 100.0
gc current multi block request 1260 99.8 .2
gc object scan 28.8K 100.0
gcs log flush sync 65 95.4 3.1 1.5
ges LMON to get to FTDONE 3 100.0
ges generic event 1 100.0
ges inquiry response 2 100.0
ges lms sync during dynamic remastering and reconfig 24 16.7 29.2 54.2
ges message buffer allocation 63.1K 100.0
kfk: async disk IO 23.3K 100.0 .0 .0
kjbdrmcvtq lmon drm quiesce: ping completion 9 11.1 88.9
ksxr poll remote instances 19.1K 100.0
latch free 52 59.6 40.4
latch: call allocation 2 100.0
latch: gc element 1 100.0
latch: gcs resource hash 1 100.0
latch: ges resource hash list 135 100.0
latch: object queue header operation 5 40.0 40.0 20.0
latch: shared pool 5 40.0 20.0 20.0 20.0
library cache load lock 74 9.5 5.4 8.1 17.6 10.8 13.5 35.1
library cache lock 493 99.2 .4 .4
library cache pin 1186 98.4 .3 1.2 .1
library cache: mutex X 6 100.0
log file parallel write 3897 72.9 1.5 17.1 7.5 .6 .3 .1
log file sequential read 350 4.6 3.1 59.4 30.0 2.9
log file single write 6 100.0
log file switch completion 3 33.3 66.7
log file sync 385 90.4 3.6 4.7 .8 .5
name-service call wait 18 5.6 5.6 5.6 16.7 44.4 22.2
os thread startup 146 100.0
rdbms ipc reply 3763 99.7 .3
read by other session 2 50.0 50.0
reliable message 4565 99.7 .2 .0 .0 .1
row cache lock 2334 99.3 .2 .1 .1 .3
undo segment extension 8 50.0 37.5 12.5
utl_file I/O 11 100.0
ASM background timer 3343 57.0 .3 .1 .1 .1 21.1 21.4
DIAG idle wait 203.2K 3.4 .2 .4 18.0 41.4 14.8 21.8
JOX Jit Process Sleep 73 2.7 97.3
KSV master wait 2213 99.4 .1 .2 .3
PING 1487 81.0 19.0
PX Deq Credit: send blkd 7 57.1 14.3 14.3 14.3
PX Deq: Execute Reply 2966 59.8 .8 9.5 5.6 10.2 2.6 11.4
PX Deq: Execution Msg 10.6K 72.4 12.1 2.6 2.5 .1 5.6 4.6 .0
PX Deq: Join ACK 3006 77.9 22.1 .1
PX Deq: Parse Reply 3184 67.1 31.1 1.6 .2
PX Idle Wait 6466 .2 8.7 4.3 4.8 .3 .1 5.0 76.6
SQL*Net message from client 14.7K 72.4 2.8 .8 .5 .9 .4 2.8 19.3
Space Manager: slave idle wait 722 100.0
Streams AQ: RAC qmn coordinator idle wait 259 100.0
Streams AQ: qmn coordinator idle wait 250 50.0 50.0
Streams AQ: qmn slave idle wait 125 100.0
class slave wait 55 67.3 7.3 1.8 5.5 1.8 7.3 9.1
dispatcher timer 66 6.1 93.9
gcs remote message 218.6K 7.7 1.8 1.2 1.6 1.7 15.7 70.3
ges remote message 72.9K 29.7 5.1 2.7 2.2 1.5 4.0 54.7
heartbeat monitor sleep 722 100.0
jobq slave wait 7725 .1 .0 99.9
pmon timer 1474 18.4 81.6
rdbms ipc message 103.3K 20.7 2.7 1.5 1.3 .9 .7 40.7 31.6
shared server idle wait 121 100.0
smon timer 18 100.0
wait for unread message on broadcast channel 7238 .3 99.7
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (64 msec to 2 sec)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: ms is milliseconds s is 1024 milliseconds (approximately 1 second)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 64ms to 2s <32ms <64ms <1/8s <1/4s <1/2s <1s <2s >=2s
ASM file metadata operation 6 99.8 .1 .1
DFS lock handle 6 99.9 .1 .0
OJVM: Generic 16 55.6 2.8 41.7
PX Deq: Signal ACK RSG 3 99.9 .0 .1
PX Deq: Slave Session Stats 3 99.9 .0 .0 .0
SQL*Net break/reset to client 1 95.0 5.0
control file sequential read 1 100.0 .0
db file parallel read 34 91.4 8.6
db file scattered read 4 100.0 .0 .0
db file sequential read 6 100.0 .0 .0 .0
direct path write temp 11 99.8 .1 .1 .0
enq: WF - contention 2 81.8 18.2
gc cr block 2-way 1 100.0 .0
gc cr multi block request 1 100.0 .0
gc current block 2-way 1 100.0 .0
gc current block busy 2 71.4 28.6
gc current grant busy 8 99.9 .0 .1
ges lms sync during dynamic remastering and reconfig 13 45.8 20.8 33.3
kjbdrmcvtq lmon drm quiesce: ping completion 8 11.1 11.1 77.8
latch: shared pool 1 80.0 20.0
library cache load lock 26 64.9 14.9 12.2 4.1 4.1
log file parallel write 2 99.9 .0 .0
log file sequential read 10 97.1 2.0 .6 .3
log file switch completion 2 33.3 66.7
name-service call wait 4 77.8 22.2
os thread startup 146 100.0
reliable message 4 99.9 .0 .1
row cache lock 2 99.7 .0 .0 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 sec to 2 min)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: s is 1024 milliseconds (approximately 1 second) m is 64*1024 milliseconds (approximately 67 seconds or 1.1 minutes)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 4s to 2m <2s <4s <8s <16s <32s < 1m < 2m >=2m
row cache lock 6 99.7 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 min to 1 hr)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Statistics
* ordered by DB Time
Service Name DB Time (s) DB CPU (s) Physical Reads (K) Logical Reads (K)
ubshost 1,934 1,744 445 73,633
SYS$USERS 105 45 1 404
SYS$BACKGROUND 0 0 1 128
ubshostXDB 0 0 0 0
Back to Wait Events Statistics
Back to Top
Service Wait Class Stats
* Wait Class info for services in the Service Statistics section.
* Total Waits and Time Waited displayed for the following wait classes: User I/O, Concurrency, Administrative, Network
* Time Waited (Wt Time) in seconds
Service Name User I/O Total Wts User I/O Wt Time Concurcy Total Wts Concurcy Wt Time Admin Total Wts Admin Wt Time Network Total Wts Network Wt Time
ubshost 60232 90 2644 4 0 0 13302 0
SYS$USERS 997 2 525 19 0 0 1973 0
SYS$BACKGROUND 1456 2 1258 14 0 0 0 0
I am not able to paste the whole awr report. I have paste some of the sections of awr report.
Please help.
Thanks and Regards, -
Deleting the client immediatly since WLAN is changed
Hello; I recently upgraded our 5508s to 7.0.98 I am now seeing this mesage on the primary WLC while running adebug on a client *apfMsConnTask_1: Sep 29 11:05:36.114: Deleting the client immediatly since WLAN is changed. anyone know what this means?
ThanksJohn,
Have you figured out a solution from your problem? Did the fast ssid change work?
In my scenario I disabled it as I would see clients connecting from one SSID to another but retaining their ip address from the 1st ssid.
This is bad (or I've missed something) if you have different firewall rule sets for these 2 SSID's.
Regards,
Craig -
i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks
If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
Report:Setting the line-count in the output automatically
i want to set the line-count in the report automatically irrespective of screen resolution.could you please explain.
hi,
try this,
report zrich_0001 line-count 25(4).
reward points if useful,
regards,
Raj, -
I have set the CustWiz/MST to 'Disable and Lock' the ability to display PDFs in the browser. We wan
I have set the CustWiz/MST to 'Disable and Lock' the ability to display PDFs in the browser. We want them to open separately in Acrobat. After I deploy, the setting IS disabled and locked, but when you click a PDF in the browser, it STILL opens in the browser, and not in Acrobat.
I am pushing Acrobat onto machines that already have Acrobat Standard 9 installed with the same settings. It worked properly then.
What is causing this setting to be ignored? How can I fix it? It's delaying my deployment.
I have to deploy Acrobat 9 due to the bug I discovered here:
http://forums.adobe.com/thread/865843
(With many other frustrating responses).
This is getting a little irritating...
Thanks for any input!
Acrobat Standard X
XP SP3
Firefox 5Thank you for the answer about updating the Foxit plugin. Firefox tags the Foxit plugin as potentially unstable, so it turns out I had another program killing the plugin's startup process so it was always disabled in firefox. I reenabled its startup process and updated the plugin. To get firefox to use it as the main pdf reader I went to options>applications and changed the option for pdf to the foxit plugin and everything works dandy now! Thanks again!
-
Downloaded an E.P. and all of the songs play fine except one which skips itself. The play count goes up and if I click later in the song it will play, but it doesn't play automatically, how do i fix this?
many thanks.
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
How do I set the number of simultaneous downloads? Per server?
iTunes always tries to download 3 podcasts at once, which leads to timeouts on podcast servers that limit the number of connections. That means I'm either missing episodes or else I need to manually babysit iTunes.
Is there a way to set the number of simultaneous downloads? I'm using XP.
Thanks.You can turn simultaneous downloads off. In the downloads window, at the lower left. Also, while things are downloading, you can pause all but one or two.
-
Well, the title of the question pretty much says it all.
If you go to Edit/Preferences, you can set the default duration for each slide. This will affect only those photos you've imported into your project AFTER changing this preference.
You should also turn off the preference for Scale to Frame Size, so your photos do not fill the screen. (And, for efficiency's sake, make sure your source photos are no larger than 1000x750 pixels, per the FAQs at the top of this forum.)
You can also set the duration of each slide by selecting all of the stills you want to include on in your slideshow, right-clicking and selecting the Create Slideshow option. -
JSP, DataWebBean: How to dynamically set the where clause of query and display record
Hi,
I am reposting this question as per suggestions made by Mr. Dwight.
I have used ViewCurrentRecord web bean to display records from EMP table. I have to use the Dept_Id_FK from the current
record of the EMP table to display corresponding records of Dept table. I have a view object called DeptView in my Business
Components which selects all the records from the Dept table.
How do I get the value of Dept_Id_FK and use it to display the required records of the Dept table?
I tried to declare a variable and get the value of Dept_Id_FK but it did not work. My code is as follows:
<%! String m_DeptId = null; %>
<jsp:useBean id="RowViewer" class="oracle.jbo.html.databeans.ViewCurrentRecord" scope="request">
<%
RowViewer.initialize(pageContext, "EMPApp_EMP_EMPAppModule.EMPView1");
RowViewer.setReleaseApplicationResources(false);
RowViewer.getRowSet().next();
m_DeptId = (String)RowViewer.getRowSet().getCurrentRow().getAttribute("DeptIdFk");
%>
</jsp:useBean>
Thanks.
nullFirst of all, Thank you very much for making use of the new topic format. It is very much appreciated.
As for your question, I think there are several different ways to accomplish what I think you want to do.
1. Create a view object that includes both Emp and Dept entities and join them there. In this case, your query would look something like this:
Select e.empno,e.name,...,d.dname,d.loc from emp e, dept d
where e.deptno = d.deptno
You should be able to create a JSP off of this view object that contains both the employee and department information. In this case, BC4J takes care of the foreign key to primary key coordination.
2. In order to set a dynamic where clause for a view, you need to do the following in your usebean tag:
rsn.initialize(application,session, request,response,out,"DeptView");
rsn.getRowSet().getViewObject().setWhereClause("deptno=" | | m_DeptId);
rsn.getRowSet().getViewObject().executeQuery();
rsn.getRowSet().first();
You will need to do this in a separate usebean tag from the EmpView, since the usebean can only initialize one view object.
In other words, you would have your ViewCurrentRecord bean tag for the EmpView, then a separate one for the DeptView where you use the above code to set the where clause to display just the information for the department you want.
Another option, but one I'm not sure would work as well, is to create a master-detail JSP to do this for you. Usually a master-detail is a one-to-many (one department to many employees). Your request appears to be the reverse, but might still be doable using the same mechanism.
You set up relationships between views in your BC4J project using View Links. If you used the BC4J project wizard and created default views, some of these links may have been created for you. They are created when BC4J detects a foreign key to primary key relationship in the database.
You can create your own View Links using the View Link wizard. Select your BC4J project node and choose Create View Link... from the context menu. You will be asked to select a source view (Emp), and a target view (Dept), then select the attribute in each view that related the two of them (deptno).
Next, you need to reflect this new relationship setting in your application module. Select your app module and choose Edit from the context menu. On the data model page, select the EmpView node in the Selected list. Now select the DeptView node in the available list and shuttle it over. You should see DeptView1 via yourlink appear indented under the EmpView node. Save and rebuild your BC4J project to reflect the changes.
In your JSP project, you can now have the wizard create a master-detail form for you based on DeptView1.
Let me know if the above answers your question, or if I have misunderstood what it is you wanted to do.
null -
Setting the hit counter to a specific number.
I posted this in the "previous versions" in error.
OK, I got the hit counter working in iWeb 08. Is there a way to set the number it starts counting from? I would like to start it where the old one left off rather than o.Captain Mench wrote:
Where the heck did you find THAT code??
It's what you gave me in you post, your counter now is: counterValue="857" +- "?";
Source from the page?
Nope, it's all in the info you provided.
Seriously, there are a lot of debugging tools built in OSX, but you have to know what/how to turn them on. AppleScript (bundled in every mac, and my fav) is a tool that I use a lot, as I mentioned in my other posts, I can turn on/off iweb elements <edit> (from user/client browser end) </edit> at will in OSX and safari - because, iweb code is based on DOM: http://www.w3.org/DOM/ and heavily on javascript
I know a bar in Palo Alto that serves a pitcher of Sierra Nev pale ale for $5 (during lunch and happy hours), you buy and I'll show
Message was edited by: Cyclosaurus -
I usually use a wireless network at home and have very few time out problems with Firefox.
I am travelling and using Optus Wireless broadband where the average ping to a site is 700+ms .
I suspect that this is the cause of the high number of timeouts I am experiencing.
Optus say there are no problems so I think I will have to set the timeout to a longer period.
Please advise what variable name/s (and in which file) the timeout is set for LOADING PAGES.
Thanks in anticipation.
Greg Atkinson.
By the way the same is happening in IE8
and on many sites other than the Yahoo one below.
================Full Error Page ==============
URL is http://au.mg4.mail.yahoo.com/dc/launch?.gx=1&.rand=81jkv757qfdqt
=========================================
The connection has timed out
The server at au.mg4.mail.yahoo.com is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.Having the same problem 4 out of 5 times I try to navigate to a new site I get the error "connection has timed out".
My I phone works fine on the same wireless connection so it must be something to do with the computer. The problem occurs on IE, firefox, and google chrome.
I too would like to know how to how to either fix this problem or failing that to extend the length of time before the connection times out (which is currently only about 5 seconds).
Please help!
Thanks in advance -
Is it possible to set the sound output to Firewire and HDMI at the same time?
I would like to use Amarra for playing music thru the Firewire to a DAC and I would like the family to be able to use the MacMini for streaming sources thru the HDMI without having to change any settings every time. I'm running 10.8. Is that possible thru any special settings or separate software?
Thanks in advance
HarryThe Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Do some web searches for using software called Soundflower in conjunction with other 3rd party audio software to set up your own audio input and output sources.
That is all I know about it. I have read a few ideas for doing such things over the years. -
How to set the display ratio of master and detail view
Currently, I use SplitApp that contain the master and detail view. And I would like to show the master view on the left half and detail view on the right half. Is there any proper way to adjust this?
Thank you in advance.You can set the width ratio by adding css. Check this,
http://jsbin.com/dakir/1
Maybe you are looking for
-
Unit of measurement for materials received and withdrawn
Hi Experts, Base unit of material is KG whereas sales unit is M2 and conversion is maintained between both. Now I am using sale unit (M2) while entering material componenets. Then I am raising PR, PO, GR in project and withdraw the material in sale u
-
Oracle 8.1.5 Invalid Staging Area Error
I get an error message: Invalid staging area. There is no top level components for Windows NT available for installing from this staging area. I installed this version successfully running win98, but i get this error with XP. I tried renaming the sym
-
Project as an Investment measure - Unable to settle
Hi, Request help on the below situation. 1.We have created a project as an Investment project using tcode CJ20N and a WBS element in the project also. The WBS element when released, creates an AUC automatically. However the AUC created does not have
-
I've been looking at ways to cool my MacBook Pro down when gaming. I've come across two in particular: Targus Chill Mat for Mac [AWE41US] and ThermaPak HeatShift Pad. Any suggestions on which would work better or other options?
-
Hi, I request you to explain the process involved to post incoming payments in F-28. Please let me know how I can track the Account number under Bank data of a customer and also what document type to be selected? If I select document type u2013 DZ sy