Setting the default display (monitor)

I use my TV as my second monitor to stream Netflix.
If I'm watching something in a separate window and close out/shut down for the night FF will default to the TV instead of the active monitor (I don't keep the TV on all the time). This happens even if I pull the other window back to the primary monitor.
I want to set FF to always default to my #1 monitor no matter which window it was last open on.
?

dadorama wrote:
So, others MUST not enjoy a bluish screen, right? I believe color correction/mamagement is a mainstreamkind of thing- and the T400 has beemn out long eneough for knowledge/work arounds for panel color fidelity, yes?
Welcome to the forum!
I'm sorry no one has had an answer for you yet. It's been a slow weekend. Perhaps erik or one of the others who deal with color will have some information to share next week.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Similar Messages

How to set the default display date of Calender prompt of SMPortal???

Good Day!!
As for as my knowledge, the default date Visible in all Calender prompt will be the
Starting Date in the Specified date range either "RelativeDateRange" or "AbosoluteDateRange".
But we have a requirement to set the default date to a date in the middle of the specified range, I don't find any option to specify in Request Offering Wizard or MP's xml file.
Our scenario is as follows,
    We are trying to customize the CSPP's request offer "Request Virtual Machine", which has a user promt to select Decommission Date for the New VM. We have configured the date prompt as Relative Date range and set the
Start date as "1 day next to user's current time" and Maximum date to "90 days after relative date". So the user will get option to select Decomm date from (1-90) days with the defalut date as 1st day next to his current
time. But our requirement is to set the default available date as 90th date in the above mentioned Relative Date Range.
     I couldn't find any option in Request offering Wizard as attached below,
      Also I couldn't even find any tag to specify the default display date in the MP's XML file as attached below. Is there any other <tag> can be included inside <Details> tag to accomplish this ??
   Is there any other way to accomplish this???
    Please advise
Thanks,
Narayanababu
Thanks and Regards, Narayana Babu

This is probably a link editor parameter, see the linker and loader guide.
Another thing you can do is write your own sbrk() that will log whenever it's called, so you can at least see how many times it's called and with what values. If you really need in-depth instrumentation, write your own heap routines and give them the same names as the CRTL routines. The linker should find yours first and route all memory operations through them. At least, that's the way it worked for me on SunOS 4.1....

How do I set the default external monitor setting to NOT mirror displays?

Greetings folks. I take my Lion macbook all over the place, and frequently plug into projectors to present. I NEVER mirror my display, and always use the projector and on-screen displays as separate displays, yet when you plug in a new projector to the MacBook Air (or MBP) it always defaults to "Mirror Displays" in the arrangement tab. Is there a way to change that to NEVER default to mirror displays?

I've tried that, and then created my installer, but it defaults back to having auto update checked, or in the ON position. I want it to default to being OFF so any new installs or upgrades that I send out do not turn it back on.
We manage all computers here, and do not want users doing any updates.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How do I set the default Hero image in a Muse slideshow widget when using Free Form Thumbnails?

Hello,
I am trying to find out how to set the default Hero image when using a Muse slideshow widget and in the Layout section I have the "Free Form Thumbnails"
box checked.
In other words, when the page loads I want to define which image displays as the first Hero image.
If I do not select the "Free Form Thumbnails" option, the top left Thumbnail image always displays first. This is fine.
But when I select the Free Form Thumbnails" checkbox I don't know how to define which image shows first as the Hero image.
I have a short video at this link where I illustrate the question:
http://amson.org/misc/default-hero-image-1.mp4
I have added a WMV video file at the link below:
http://amson.org/misc/default-hero-image-1.wmv
Okay… I think I've worked out how to do it!
[1] First have the "Free Form Thumbnails" box UNCHECKED.
[2] Organize the Thumbnails and place the image that you want to be the first Hero image when the page loads in the top left corner of the Thumbnails group.
[3] When you "Preview Site In Browser" the Thumbnail image in the top left corner will always display as the first Hero image.
[4] If you want "Free Form Thumbnails" go ahead now and SELECT that checkbox.
[5] Whichever image was in the top left of the Thumbnail group before you checked "Free Form Thumbnails" will still show up as the first Hero image when the page loads, regardless of where that thumbnail image is located within the Thumbnail images group.
Thanks very much.
Chris.

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

How can I set the default line height?

Greetings,
I have a report that displays observed behavior in a list format like the one below:
Behavior Observed:
    Withdrawn
    Happy
    Sad
    angry
There are 5 responses as to the severity of the behavior or it is left blank if the behavior was within normal limits.
So the output would look like this:
Behavior Observed:
    Withdrawn            (mild)
    Happy
    Sad                      (moderate)
    angry
The problem is that when this report was designed the details sections were not uniformy formatted and the spacing between data elements is hard to follow from the label to the data field. I tried to set the details to be uniform by selecting "Arrange Lines", however when I do this, the data is displayed too close horizontally. So my question is how do I set the default line height for each field so that they are uniform in distance from each other but not too close due to the font height?
Does this make sense?
Thank you,
Kevin

I'm confused... How are you associating line height with horizontal field spacing???
If you have this...
Behavior Observed:     Severity:
Withdrawn          (mild)
Happy
Sad               (moderate)
angry
But want it to look like this...
Behavior Observed:
Withdrawn (mild)
Happy
Sad (moderate)
angry
all you have to do is create a concatenation formula. Something like this...
{TableName.BehaviorObserved} & " (" & {TableName.Severity} &")"
Sorry if I've misunderstood what you are trying to do.
Jason

Is it feasible to set the rows displayed per page dynamically?

Hi,
Is it feasible to set the rows displayed per page dynamically in the table view result as per the user wants eg : the user wishes to see only 25 records or all the records?
Also what is the maximum limit of rows that can be fetched as per the entry in instanceconfig.xml :
<ResultRowLimit>65000</ResultRowLimit>
Is there a limit for number of rows being displayed in table view?
thanks
Rishabh

See this
How to increase default number of rows dspalyed ?
This is your thread only...

How to set the default value of a database column to NULL

Hello,
I want to set the default value of a column (VARCHAR2(20) to NULL, nut I cannot figure out to do this. I tried the following editing the offline table with JDeveloper:
Default Value : <empty> -> On database NULL
Default Value: '' -> On database ''
When I create a new column, there is no default value on the database side and when I open the tabe properties in the database navigator I can see that the default value is (null). This is what I want to see in the other column as well. I don't know why sometimes a default value is visible on the database side (when generating form offline tables to database tables) and sometimes not.
Perhaps sombody can bring some light in this issue.
Thanks Thomas

Hello Shay,
I have the impression that you don't understand my problem. So here step by step:
1. Create a offline Table TEST with one column TEST: VARCHAR2(20). nullable=true, no default value.
2. Generate the table to the database
3. When you look at the table properties (columns) with the database navigator the following information is displayed (sorry for the formatting):
Column Name | Data Type | Nullable | Data Default | COLUMN ID| Primary Key | COMMENTS
TEST | VARCHAR2(20 BYTE | Yes | (null) | 1 | (null) | (null)
4. Now set the default value for the column TEST in the offline table for example to 'Test'
5. Generate the table to the database.
6. When you have a look at the database table, the default value is now 'Test' (as expected)
7. Now remove the default value of the column TEST in the offline table
8. Generate the table to the database
9. When you have a look at the database table, the default value is now NULL (in uppercase letters without parenthesis)
And this is where the problem starts!
When you generate the table again with the options "Alter/Manual Reconcile" the default value of the column test is considered to be different! But in fact it should'nt be different because nothing has been changed.
Best regards Thomas
Edited by: thmayr on May 28, 2009 9:05 AM
Edited by: thmayr on May 28, 2009 9:31 AM

How to use FlashVars to set the default option on a combobox

We are using XCelcius to display data in an XML file that is populated by another program using the Web Services approach.
On our widget, there is a combobox that allows the user to select a specific range of data. In Xcelcius, the value of this combobox can be defaulted using the Behavior->Default Options->Combo.
This is good, but this also means hardcoding a particular value. What we'd like to do is set the Default Option on the combobox via a FlashVar.
Is this level of behavior exposed via the FlashVars so we can define the default option in our HTML file?
Thanks for reading.

unfortunately you cannot dynamically set the default option in 'Any' selector - so your Flash Vars approach will not work

[svn:osmf:] 13942: 1. Set the default value of _manualSwitchMode back to false

Revision: 13942
Revision: 13942
Author:   [email protected]
Date:     2010-02-02 13:02:47 -0800 (Tue, 02 Feb 2010)
Log Message:
1. Set the default value of _manualSwitchMode back to false
2. Remove the setter of client property and change relevant methods/properties.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPNetStream.as

i have tried this but this is not working.
follwing code working for Null case not for False
vcr.setAttribute("Marked","is null"); this code display all rows who has null but when i checked any row and then unchecked so that row get value "false" also not display.

Cannot set the default value of an item in the detailed table

Hi,
I have Master-Detail group, both are Table formats.
I need to set the default value of an item in the details row to the value of an item in the selected row in the Master table.
I tried Default Display Value=#{row.MasterItem}, but it seems it is trying to access current details row instead of the Master.
I tried #{bindings.MasterGroupColumnName.inputValue}, but it does not work.
Any ideas
Thanks in advance
Mohamed

I think I now what I'm doing differently, I had the "New Rows" JHS property of the detailed table group "empty" instead of the default "2" value.
It seems that "Default Display Value" expression works only for the new records specified in the "New Rows" property. But when I try to "Add" new record using the "Add Row" button, the new record inserted does not have the default values generated, only has values populated for the items of the FK (in the view link) but not the ones set through the property.
I guess in a nutshell, how I can get the details item to behave like the FK columns?
Thanks much
Mohamed

Will migration assistant change the default display settings on my new Mac?

I just set up a new iMac and used Migration Assistant to load from my Time Machine. But now the display looks muted and not as bright. Would Migration Assistant change the default display settings on my new Mac?

Migration Assistant may not be the cause. But you should reset the NVRAM and see it that fixes the issue.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

How to set the default context value for flexfield in OAFramework pages

Hi,
I have a page which contains a contexxt value field i.e Flexfields
To select the context value we have to select the value from drop down
So Here we want to display the context value immediately when the page is called
How to set the default valu in this case
Regards,
Krishna

You can set the Attribute category view attribute to the Flexfield context value and call prepareforRendering in the flex bean. Check the dev guide for details.
Regards
Sumit

Create a Loolup field with PowerShell but Change the Default Display field

Hi
I am creating the a load of site columns with PowerShell. In the case of a Lookup Column I want to ensure that a the the industry column is checked programmatically.
$myField.LookupList = $spLookupList.ID
$myField.LookupField = $LookUpmyField.InternalName
As you can see there is no provision for a display name (Industry) which I want to display to the user once they select a lookup column
I just know somebody is going to suggest CAML !!!! Btw the code works but none of the checkboxes are selected as expected.
Daniel
Freelance consultant

I tried a same in past. Couldn't find a perfect code. You can try below:
http://blogs.msdn.com/b/varun_malhotra/archive/2008/06/19/how-to-set-the-default-value-for-a-look-up-field-for-an-item-as-it-is-being-created.aspx
<Code>
SPList docs = w.Lists["Documents"];
SPFieldLookup fl = (SPFieldLookup)docs.Fields["City"];
fl.DefaultValue = "1;#Mexico City";
fl.Update();
</Code>
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/afd71aa8-54d3-424f-9b72-67328e080048/update-lookup-field-powershell?forum=sharepointdevelopmentprevious
$w = Get-SPWeb http://web
$l = $w.Lists["MyDocumentLibrary"]
$lf = $l.Fields["lookupColumn"]
$i = $l.Items[0] #List item to update
$lf.ParseAndSetValue($i,"1;#lookupvalue") #1;#lookupvalue refers to the ID of the lookup item and the value of the lookup item.
$i.Update()
If this helped you resolve your issue, please mark it Answered

Set the default spellcheck language to English (Australian)

When I start the browser, the spell check dictionary is always English (US)
I have to change it manually every time after opening the browser.
In the preferences for Display Language, I have [en-au], then [en]
Has been this way for many versions - currently 34
Happens on 5 systems here
Is there a way to set the default spellcheck to Australian?
Regards,
Mike

Current Firefox versions use the "lang" attribute in the HTML tag to automatically select a dictionary if you have one for the specified language, so with an en-US link this would be the en-US dictionary for this forum.
<pre><nowiki><html class="no-js" lang="en-US" dir="ltr"></nowiki></pre>
I'm not sure if you can override this easily, but I would assume that this should have effect on prefs.
You can use the user.js file to force a specific value for the spellchecker.dictionary pref.

Setting the default display (monitor)

Similar Messages

Maybe you are looking for