Setting the Default Homepage for all current and new users but leave it user modifiable.
I am in the process of creating our new Windows Deployment Image based on Windows 7. Previously I was able to use the browserconfig.properties file in the Firefox main program files directory to change the default homepage for all new profiles while still allowing the user of any given profile to change their homepage. I have not yet found any equivilent in FireFox 4. Any help would be appreciated. Thanks.
> The locations of the files are different and none of them show up under
> the new user, but do show up for existing users.
Enable logging for GPP files to see what's happening:
http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))
Similar Messages
-
Set the default size for all archive mailboxes including the ones it will be created in the future
Hi there.
We are in the phase where we Will enable Online Archive for all the users.
We see that the default Archiving Quota is set up for 50 GB. We have found this powershell command on MsTechnet forum
Get-Mailbox -resultsize unlimited | where {$_.ArchiveDatabase -ne $null} | set-mailbox -ArchiveQuota 7GB -ArchiveWarningQuota 6GB
which I guess it will set up the ArchiveQuota to 7GB to all the users, true?
The question is if this command will work only for those users who currently have archiving enabled or it Will also work for those users which we are planing to enable archiving in the future?
The idea is that everyone would not have 50GB by default and this should be a default value also for those who currently do not have archiving enabled.
with best regards,
bostjancHi there.
I don't quite get it.
I have created "for example" a database called: STH ARCHIVE.
Then if I take look on properties of this database this is how it's shown:
And now here comes the "tricky part" which is a little bit odd to me.
I have enabled archive on my mailbox and selected this STH ARCHIVE DB to hold this archive mailbox.
Then I have manually ran ManagedFolderAssistant for my account: Start-ManagedFolderAssistant -Identity "my-email-address"
And after I have greped the size of my mailbox:
Get-Mailbox | Get-MailboxStatistics -Archive | Sort totalitemsize -desc | ft displayname,totalitemsize, itemcount >C:\report-archive-database-mailboxes.txt
And get the result:
Personal Archive - MYUSERNAME
TotalItemSize: 4.071 GB (4,371,586,689 bytes)
ItemCount: 55227
So now I don't understand how I was able to go thru that sizes which are in the upper print screen of archive DB properties?
bostjanc -
How to set the default settings for all users in 11.1.1.3
I have couple of questions
1. How can I change the default setting for all the users so that whenever they log in the planning takes them to the Task lists mode. Or is this a one time thing which they need to do individually ?
2. How can I set the defalut setting for all the users so that they can see the same page when they log into Workspace ?For workspace have a read of - http://docs.oracle.com/cd/E12825_01/epm.111/bpmui_admin/assigning_default_preferences.html
For planning you can't really set it without hacking tables.
Cheers
John
http://john-goodwin.blogspot.com/ -
A Must Read for all current and future Final Cut Pro X users
Take a breath people, as this article states, Final Cut Pro X IS NOT an upgrade to Final Cut Pro 7, it is an entirely new program. Much like Final Cut Pro 1 was the start of a new revolution in NLE video editing, Final Cut Pro X is the beginning of a new revolution. Anyone that has a clue of what they are doing or talking about when it comes to professional workflows knows you can't expect to switch to a new product and a new workflow from day 1. There is an evolutionary process to this, just like there was when the first Final Cut Studio came out, and then version 2 and then version 3 or any new version of OS X for that matter. It will take time for third-party developers to catch up just as it did with every other major release. In the meantime, you don't change a major piece of your workflow that your business or jobs depend on until that major piece has been out, tested and guarunteed to work for YOUR workflow, PERIOD! If you've purchased final cut pro X already, take this time to start learning a new way of looking at editing, a new way of working while the software catches up to the standards and features that every professional desires. If you havn't purchased it yet, either do so knowing what your getting right now, or simply wait for the evolutionary process to run its coarse.
This is the way the world of software works people, anyone that doesn't understand this, frankly, doesn't have a clue.
http://library.creativecow.net/adcock_gary/FCPX/1Original post: "Anyone that has a clue of what they are doing or talking about when it comes to professional workflows knows you can't expect to switch to a new product and a new workflow from day 1."
Even this shows ignorance of the professional marketplace. The fundamental workflow of the professional editor hasn't changed in 80+ years: The shots get delivered to the Editor, the Editor edits the shots and delivers the results. While I can see how editing software can change the way this fundamental workflow is accomplished, it will not change the fundamental workflow of movie making or programme itself. And therein lies the massive problem with FCPX! However Apple decides to redefine the workflow of how the professional editor edits, it must also provide the basic tools which allow the Editor to take delivery of the shots and make delivery to the other personnel involved in making the film. In a professional environment there are others with whom you must collaborate, when was the last time you saw film or TV credits where only one person was listed? Apple has decided NOT to incorporate in FCPX the fundamental tools which allow for the accepting and delivery of materials within the professional environment using internationally accepted standards. Apple has also left out a range of other essential features required by professionals.
FCPX is an excellently placed product. It's exactly what the makers of wedding DVDs, youtube contributors and the serious home enthusiasts has been lacking; an easy to use yet powerful and semi-automated video maker. It's an iMovie Plus, a Final Cut Express X, it fills a hole in the market and will be of benefit to hundreds of thousands, maybe millions of people (far more potential customers than the relatively limited market of professional editors!). Unfortunately, what it is NOT is a Final Cut Pro X!! Because except for wedding DVDs, p*rn movies and a few other very simple editing jobs, it is unusable for the vast majority of professional editing situations.
It seems to me there are two reasons why so many people are so angry about FCPX. The first is that it is called Final Cut Pro X (Final Cut Professional 10) and has been marketed to everyone (including professional editors) as an upgrade from FCP7, this is at least misleading and at worst probably borders on misrepresentation. The second reason is that new features like iMovie import and Vimeo and Youtube export have been given prominence, while at the same time basic professional functionality has been removed. This is a very clear indication that the Final Cut software has been repositioned towards the prosumer market and away from the professional market. This is a real kick in the teeth for those who have built their careers and business around this software and Apple has made the situation worse by marketing this kick in the teeth as a major improvement?!
I've seen messages in other threads from happy amateurs telling the professionals to stop b*tching as FCP7 still works and they can continue using that version. This again demonstrates ignorance of the highly competitive nature of the professional editing marketplace. You need to be doing it better and more efficiently than the next editor. FCP7 has been in need of an update for a few years now, the longer professional editors stick with FCP7, the further behind the competition they will fall. It seems clear that for the foreseeable future FCP7 is Apple's last professional video editing software which means a considerable outlay for Editors, to buy new systems, new software and retrain themselves and employees. It's likely that the release of FCPX and the way it has been marketed will make life very difficult for many editors and may even ultimately cost some their livelihoods.
<Edited by Host> -
How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?
Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha -
After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013 -
How to set the Default values for Info Objects in Data Selection of InfoPac
Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CVHi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha -
Set a default layout for all users via DIAPI
Hello everyone,
I am attempting to set a default report for all users/business partners using the DI-API.
I can accomplish this in the B1 application via Tools> Layout Designer...>Set as Default
If there are entries in the RDFL table for this layout, I am prompted to delete these entries and set this layout as the default for all users/BP's
Based on the SDK Documentation, the following code should accomplish the same thing via the DI-API
(stripped down for clarity)
Dim oDefaultReportParams As DefaultReportParams
oDefaultReportParams = oLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
oDefaultReportParams.LayoutCode = sMyLayoutCode
oDefaultReportParams.ReportCode = sMyReportCode
Me.oLayoutService.SetDefaultReport(oDefaultReportParams)
Code executes fine, but it doesn't have the expected impact on settings. The above code adds an entry to the RDFL table rather than changing the DfltReport field in the RTYP table like I expected, so instead of setting the default report globally for all bps/users, its adding an entry to the RDFL table to set the value for a specific user/bp
I experimented by including and setting the following properties to every combination I could think of with the same results
oDefaultReportParams.UserID = 'tried 1, 0, -1
oDefaultReportParams.CardCode = 'tried "", "0", "-1"
Am I misunderstanding the API, or using the wrong objects/calls...? If all else fails I could accomplish this via the UI-API instead, but the application was intended to be a stand alone app that didn't rely on SAP B1 application running, so any help or suggestions would be much appreciated.
Thanks!Hi,
Please repost at SDK forum to get quick response. Close this thread here with helpful answer.
Thanks. -
Can I set the default locale for jvm
Hi,
Can I set the default locale for jvm?
How to do it?
PanMy windows default locale is chinese .I have thought of your opinion. But in
windows nt , if I change the locale , all the environment will be
destroyed(just like reinstall it , it's difficult for me) . So , Is there
any other approach?
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Did you try to change the locale in the Windows control panel?
(Control panel -> Regional Options -> Your locale)
Pan YangBin <[email protected]> wrote:
I have tried changing this system property and other properties such
as -Duser.language=en -Dfile.encoding=Cp1252 , but all these properties
did
not changed, you can get this infomation from the log file .Maybe these
system properties are readonly.
Thanks very much.
Pan
Chris Halstead <[email protected]> wrote in message
news:[email protected]...
Try adding -Duser.region=US to the java command line used to start
WebLogic...
-chris
"Pan YangBin" <[email protected]> wrote in message
news:[email protected]...
Hi,
The problem exists in my project still exist.That is it.
When I did not set weblogic.jsp.encoding to GB2312 in my web
application(web.xml), and when the jsp file contain's chinese , the
output
will be error(error chinese) .And when I did not set it , the output
is
correct, but when I use request.getParameter("SomeFormElement")(theelement
inputed chinese), the return value is error(still chinese error).And
when
I
am in windows nt english version and do not set this property, all
these
two
problems dispear. And I try to compare the java files those were
generated
by weblogic from the jsp file , there is only two additional clause
in
the
java file. That's it:
((weblogic.servlet.jsp.JspWriterImpl)out).setEncoding("GB2312");
response.setHeader("Content-Type", "text/html; charset=GB2312");
(the web.xml has <context-param>
<param-name>weblogic.jsp.encoding</param-name>
<param-value>GB2312</param-value>
</context-param> to be set
So, I think maybe it works well if I change the default locale toenglish.
And unfortunately, your method is also failed.(I have to use weblogic
in
chinese environment)
Would you please help me to solve this problem?
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Try java ... -Duser.language=en ...
or mode con cp select=437 in the command prompt before running
weblogic.
Pan YangBin <[email protected]> wrote:
I'm using weblogic server 5.1 sp6 in chinese environment, and I
want
weblogic compile my jsp with en_us locale . So I can't use
Locale.setDefault(new Locale(...)) to set the default locale ,butI
really
want someway configure.
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Locale.setDefault(new Locale(...)) ?
Pan YangBin <[email protected]> wrote:
Hi,
Can I set the default locale for jvm?
How to do it?
PanDimitri
Dimitri
Dimitri -
How to set the default values for print options
Hi all,
We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?Hi Sandy,
This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
this will surely solve the issue.
Regards
Gunaseelan -
Setting the default resolution for sap logon
Hi, ALL!
I'm terribly tired of SAP interface. It's so uncomfortable for work.
For example maybe you know khow to set the default resolution for sap logon to make it use its widgets of proper size. e.g. when i work with transfer rules, it has only half of screen for useful area (i use 1400x1050), and right part is just empty, but on the left very many small fields and you should constantly use scrollbars (i think you know it well). Maybe there is system customizing for this purpose.Hello Dmitry,
There is no customizing for this - atleast to my knowledge.
However, you should have to redo the settings again and again unless you are continuously re-sizing the main window.
Cheers
Aneesh -
HI,
We are running Exchange 2010 and are migrating users from 2003 to 2010 with no problems. The client has asked me to set OWA font to LuidaSans which I can do for individuals with no problems. However, when I try and run the following command
Get-Mailbox -Resultsize Unlimited | Set-MailboxMessageConfiguration -LucidaSans but then got a message to state
"property composefontname can't be set on this object becuase it requires the object to have version 0.1 <8.0.535.0> or later. The object's currant version is 0.0 <6.5.6500.0>"
What object is this reffered to? Can anyone help please?
Thanks
PaulHi,
To set a default font for all users, you can use this command: -
Get-Mailbox | Set-MailboxMessageConfiguration -DefaultFontName "Trebuchet"
You can use any font style in place of “Trebuchet”.
I hope this information will be helpful for you.
Thanks and regards
Ashish@S
Ashish@V -
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb -
How do I set the default folder for file - open file... ?
When I save a file, photo, etc., the default folder for OPENING a file becomes the last folder I SAVED to - even after closing and reopening Firefox. Is there a way to maintain the same default folder for opening files?
Thanks.Originally posted by: kwarner.uneedspeed.net
Well... I found over 200 bugs none of which seemed to talk about setting
the default folder. I probably missed the relevant bug in the spew.
I ask a question here as a last resort -- after I've done what I think
is an appropriate search for answers.
But thanks for your help in any case.
Daniel Megert wrote:
> DemonDuck wrote:
>
>> When I need to open a file not in the workspace, I use File -> Open File.
>>
>> But the default folder it opens is in C:\Documents and
>> Setting\Administrator
>>
>> I would like File -> Open File to first open in someplace more
>> reasonable -- like the workspace.
>>
>> How do I set the default folder for File -> Open File ????
>
>
> Is your '?' key broken? Check bugzilla there's a feature request
> regarding your question.
>
> Dani
Maybe you are looking for
-
CREATE OR REPLACE PACKAGE BODY xxcsi_ib_data_ob_ecs_pkg v_update_date DATE := SYSDATE; PROCEDURE print_log( i_message IN VARCHAR2) IS BEGIN -- dbms_output.put_line('Log '||TO_CHAR(sysdate,'DD-MON-YYYY HH24:MI:SS :')||i_message); fnd_file.pu
-
Why doesn't free space increase when I delete songs?
I have a 3rd gen iPod Nano that I have had for 4+ years. I had a problem with it last week - I was no longer able to copy songs to it, so I did a restore and then reloaded a bunch of songs. This worked fine. Now what I find, though, is that when I de
-
Weird cross-imaging image corruption in iPhoto 4.0.3
Hey all, Ive had a search through this discussion and cant quite find my exact problem but have pretty much decided that rebuilding the library is the way to solve it. But before I do that, here is my problem: When I select an Album that Ive created
-
What happened to the soft proof function for printing???
What happened to the soft proof function for printing???
-
I can print sometimes from the HP 1100 printer but then I can't. The printer is printing the macbook documents wirelessly so it must be my phone. I can't find any information on my phone about its connectivity to printers.