Setting the Field Capture Information

I am having interframe flicker in my timecode and keyframe burn in after I perform reverse telecine with Cinema Tools. I was told my my lab that I shouldn't worry about this, that it is normal. However I read in the CT manual that you should not have any blurring or flicker and that all burn-in should be clearly legible after performing reverse telecine.
Depending on the settings I use in the field capture information, I get slightly better results in the image area using one setting over another, though I can't eliminate the interlace/blur/flicker over the burned-in codes. I determined that my telecine was done with "One field, with field 2 dominance" by looking at the chart on page 128 in the CT manual, and then setting the reverse telecine settings to "Field 2 only" as recommended there. ALthough this setting seems to be correct, this makes the interlacing/blur/flicker in my image worse. My lab told me to use a different setting: Field 1 Field 2 (even though this setting doesn't seem to be the correct one according the chart in the CT manual), and this gives me no interlacing in my image, though it is still there in in the burn-in.
Does anyone know what I'm doing wrong?

Hi,
Currently too the said field is optional in the settings for Field Selection in MIGO- Check with transaction code OMJX, although the field entry is grayed out, the standard functionality is that the entry made in "Qty in unit of entry" gets copied to this field.
Regards
Merwyn

Similar Messages

HCM F&P - How to set the field as Required based on drop down values

Hi Experts,
I have a requirement to set the Date field as mandatory when a particular value is selected in drop down list. I have already tried with MessageBox though it displays the error message but process moves further i.e. on clicking Check & Send button it throws an error message but still it moves further and i can see only Send button. Ideally it should halt there itself.
Thanks & Regards,
Jitesh Talreja

Thanks for your valuable inputs
Chintan
I have already tried this. It only highlight the field with the red border but still allow to move further.
Mukesh
Yes, we can definately control this from the backend but that would be the last option i should execute. Ideally, this is something to be controlled in front end itself
Poornima
By setting the field attrbiute Required will set the field mandatory as a whole irrespective of drop down values or any other UI element.
Regards,
Jitesh Talreja

How to set the field size in rule file.

i have to map total 30 fields in a rule file while by default it allows only 20 fields. so how can we set the fields as per our need?

Hi Dharmendra Ojha,
Essbase rule file does not constrain you with only 20 fileds.
When you click on 'create a rule file', by default it ll show you 20 fileds .But , when you open a data file ( in your case , you data file has 30 columns i.e 30 fields) in the data prep editor , you ll see all 30 fileds .
So ,you have to do nothing to increase the filed count , rule file will automatically show all fields .
Revert back for further clarity
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

How can I set the field ICt in component table of the Tasklist as "Input" ?

Hi experts,
How can I set the field ICt (BOM's Item Category (POSTP)) in component table of the Tasklist as "Input" Status (The system is in gray now).
I can define the different Category value by IB01 or IB02,then I can select them at the Tasklist's component table.But sometimes I need batch input such as LSMW,so pls kindly tell me how to setup it,thanks!
Yinjun

Hi,
BOM is created with some component and item category.
In task list when you go to component, in normal case one selects and copies BOM over there by clicking component selection button.
Once BOM is copied over there the BOM item category will get copied. As it is BOM item category in Task list it is greyed and it will get copied automatically from BOM.
You specify item category required by you in IB01 or IB02 and then use that BOM in task list. Go to componenet tab and click component selection button. Once BOM is copied over there the BOM item category will get copied

Set the field value, call transcation T-CODE in CRM

Hello
I face the proble as follow: select the field into the itab,and set the field itab-field to call transcation T-CODE in CRM.
exp:call T-CODE:"CRMD_BUS2000111". when I execute the program, display the opportunity value screen, not the init select&result screen.
Thanks!

Please reward and close your other post regarding a similar problem.
If you don't want the initial screen, you have fill the BDC data for the initial screen and then call the transaction with mode 'E'. I gave the same solution to your previous question.

How to set the field SKB1-FDLEV as requestred-entry in G/L Master data?

Hi All,
Could anyone tell me how to set the field SKB1-FDLEV as requestred-entry in G/L Master data?
Thanks
Gandalf

hi
Go to OB26
select Your criteria ( create, change or display)
double click on it
again double click on Bank/financial details
there you will find the Planning level make it require entry
save
with regards
ramanuja chary

How to set the field non-editable in the classical report..

Hi..
How to set the field non-editable in the classical report..

Hi experts,
For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
IF current->is_property_readonly(
'NICKNAME' ) = abap_false. "#EC NOTEXT
rv_disabled = 'FALSE'.
ENDIF.
when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
The field properties are set as Input field and the display checkbox is not checked.

Set the field's prompt at the RowViewer

Hello all,
I am working with Oracle JDeveloper 3.2, using JSP, and I have this problem:
I did not find a method to set the field's prompt at the RowViewer (JSViewCurrentRecord Class).
Humberto Zappe Loy

The following function in DataWebBeanImpl.java shows how the attribute label is obtained.
public String getAttributeLabel(RowSet rs, AttributeDef aDef)
String sLabel = aDef.getName();
if (aDef.getProperty("LABEL") != null)
sLabel = aDef.getProperty("LABEL").toString();
else
String sPropName = aDef.getName() + "_LABEL";
sPropName = sPropName.toUpperCase();
if(rs.getProperties().get(sPropName) != null)
sLabel = rs.getViewObject().getProperties().get(sPropName).toString();
return sLabel;
You will notice that the value for the label is obtained via a call to AttributeDef.getProperty() or a call to rs.getViewObject().getProperties().get(sPropName) this means that you can set a property via the BC4J attribute or view object wizard and the DataWebBeans will make use of this property for rendering the prompts. You can edit an attribute's properties by clicking on the view object to activate it in the navigator and then right-clicking on the attribute to invoke it's editor. Once you have the attribute editing UI, you can click on the properties tab to add your new properties.

How to set the fields invisible/visible dynamically with screen-exits

Goal: I am changing the subscreen from standard screen for mobile device interface, i.e. function group LMOB. With a scanner I am to read a material number and have it confirmed by the SAP system. For this I need an input field which is already supplied by the standard program. The users require the screen to be dynamic, i.e. I can not do the settings in the screen-painter.
Problem occurred: After I have changed to use the customized subscreen 1202 in function group XLRF, not all the fields are displayed. It seems that the values for setting the screen elements are lost when calling the subscreen (3202, copy of screen 2202). For instance, it does not show my input field. Somewhere there need to be a list that contains all these parameter switches? I know how Loop at screen works but cant find the values that are supposed to be passed over to the subscreen.
Would be grateful for some help.

Hi Niklas!
Unfortunately I don't know the transaction you're working on, but I had a similar problem once.
You have to use the commands LOOP AT SCREEN and MODIFY SCREEN. I found some online help here: <a href="http://help.sap.com/saphelp_470/helpdata/en/9f/dba70535c111d1829f0000e829fbfe/frameset.htm">SAP Online Help</a>. The fields of the pseudo-table SCREEN can be found here: <a href="http://help.sap.com/saphelp_470/helpdata/en/9f/dbab6f35c111d1829f0000e829fbfe/frameset.htm">SAP Online Help</a>. I think you have to set INVISIBLE to 'X' - but you may have to experiment.
Another thing to look out for is that you have to call this method in the PBO section of the dynpro. Take care no SAP logic is executed after your modification that changes your settings...
Hope this helps (please reward me if it does),
Joerg

How to set the field object's persence to "visible (Screen only)" by JavaScript?

Dear all,
I 'm new for designing Livecycle Form. As the title I mentained above, I only know the persence of field object can be configured by the JS code.
for example: this.presence = "visible";
or this.presence = "hidden"; ....
However, I want to configure the field object to visible (Screen only) by code. I had search all related key word, but I cannot find any information about this.
Question:
1. Are there any code in javascript to do that? Or any way to do this by code?

Jack,
I dont get your question, can you explain it again.
M just curious to knw the Question
Thanks & Regards
Sunil Gupta

Unable setting the video capture formats

I have a Trident Capture Device and I registered in windows this camera with jmregister.exe and I only got one format (NTSC mode) UYVY 720x576, frame rate=15. But the camera has two operation modes, NTSC, PAL with different resolutions in each operation mode, and I would like to get all possible formats for this camera using JAVA but I don´t know how to do this with JMF. Another information that maybe helps is that in the windows camera software runs well and I can configure the camera in many formats.
Can someone give me any clues to solve this problem?
Thanks in advance
Edited by: jp1963 on Jan 13, 2009 6:39 AM

jp1963 wrote:
the camera has two operation modes, NTSC, PAL with different resolutions in each operation modeNot all of the formats that your camera puts out may be supported by JMF...but yes, it may also be an issue with the device driver.
Keep in mind that JMF is several years old, and most of the capturing capabilities of it were only tested in Windows 9x, so behavior with newer cameras and formats is pretty touch and go.
I would like to get all possible formats for this camera using JAVA but I don´t know how to do this with JMF. You're not going to get anything from the camera using Java. JMF (or any other Java API, for that matter) will only take what the VFW API will hand it, and it can accept. Either JMF doesn't support the other formats, VFW doesn't support the other formats, or like you suggest, you have a device driver issue.
Another information that maybe helps is that in the windows camera software runs well and I can configure the camera in many formats.Windows camera software may be running DirecShow, whereas JMF is running VFWs. Who knows... All this really suggests is that the box isn't lying about the formats that can be output by the camera.

Filliable PDF to Excel- tell me Is there a way to export just the information typed in the fields?

I created a filliable form with over 100 sections. I purchased Adobe's ExportPDF to extract the information to and Excel sheet. However every time I upload a completed PDF it only converts the format and doesn’t capture any of the fields’ typed information. I thought that was why I named each field something when creating the form.
Is there a way to export just the information typed in the fields?

Hi,
ExportPDF is just a convertion tool, it is not meant for extracting information out of the form.
You may want to consider Adobe Acrobat. You can extract information from form fields via Tools> Forms > More Form Options > ExportData. If you'd like to try it out, we offer a 30-day trial of Acrobat X Professional for Windows here: http://www.adobe.com/go/tryacrobatpro/
~Pranav

Setting the cursor position in a field in XD01 transaction

Hi,
I am trying to validate the field Customer type (Path : XD01 > Sales area data > Extras > Additional data) in the transaction XD01 ie: It is a mandatory entry for Customer creation.
I tried displaying an error message which worked fine. But i want the cursor to be positioned in the Customer type field.
Is there any possibility for this?

Santhosh,
I tried giving "GET CURSOR FIELD v_field LINE v_line" in the exit EXIT_SAPMF02D_001. But no values are getting captured in those variables.
Moreover they have specified in the documentation as - "However, the variables specified during PAI processing are always initialized". Now this exit is getting called during PAI. Hence i believe that the values will be initialized! Moreover i think that getting the field & line information of the current cursor position is not going to help us!

MDM 2.0 - OCI mapping of field "Price Information"

Hi SDN,
we are on SRM 5.0.
we are setting up MDM 2.0. We do a new installation, although we were already on MDM 1.0. Anyway, we want to keep the repository from MDM 1.0.
Right now we have problems transferring the price of shopping cart positions from the MDM Web Search UI to EBP.
what we did so far:
1. set up j2ee server and oracle
2. set up MDM 2.0 Server
3. Deploy MDM 2.0 SP 2.0 Java API and UI stuff to j2ee
4. set MDM 1.0 Repository in the appropriate place in the file system of MDM Server and unarchived it in the MDM console
5. run repository upgrade using link from upgrade guide (http://<j2eeserver>:50000/webdynpro/dispatcher/sap.com/tcmdmsrmcat~uiutil/Utilities)
6. upgrade configuration (same link as before, but step 2)
still, in the OCI Mapping for price, I still have "price - amount" mapped on NEW_ITEM-PRICE
and still, the price, which I can see in the search UI, is not being transferred to EBP...
I am not sure, if I have to have "Price Information - amount" available as OCI mapping field. Right now, this is NOT the case. In MDM 1.0 it used to work fine with "Price - amount"
In my repository in table cataloge items I have the field "Price Information" which is a qualified lookup table, based on look up table "Price". "Price" contains the field amount, which carries the price value.
any clues welcome - regards, Matthias
Edited by: Matthias Kasig on Dec 20, 2007 4:25 PM

Hi Masa,
just another brief status Q:
Now I am able to receive the price in EBP.
But this is a workaround. Just for a test I did a new OCI mapping like this:
I leave the OCI field NEW_ITEM-PRICE blank and use instead
NEW_ITEM-CUST_FIELD4 --> mapped on --> Price Information - Amount.
Thus I am able to get the value of the price field in my BADI bbp_catalog_transfer.
There seems to be a mismatch of field types. In the MDM Console the amount field is of type 'currency' - I assume this is decimal in fact.
In my incoming structure in the BADI I have tabletype catalog_content which is based on structure BBP_WS_OCI_ITEM_S which carries field price of type DEC... seems reasonable to me - but in the debugger I can't see the incoming price value. Instead now I use BBP_WS_OCI_ITEM_S-CUST_FIELD4 which is of type CHAR20. This works! I regard this as a workaround and I am still researching to get the price field mapped correctly to the proper price field in my BADI.
Masi: Concerning your weblog and SLG1 and Errorlog BTC1...
I set up in SPRO the MDM Catalog and also checked "use error log" for the catalog - still
I wonder how I can access this log and esp the OCI fields -- can you guide me there?
I was clicking through the entries of SLG1 but don't get to see the OCI fields of the transfer, though an entry which is because of the data transfer from mdm towards EBP.
kind regards, matthias
btw: SDN was down, hence the delayed response

How to change the fields in a JSF form based on a URL parameter

I am trying to build a generic JSF form of parameters which I want to dynamically change (i.e.
change which field is visible, what the label text should be, etc) based on a URL parameter.
I can set the fields using logic in the backing bean as an action on a command button pressed.
But how do I do it based on the URL parameter ? I can retrieve the URL parameter but I
don't know where to put (or hook) the Java code to do this initialization prior to
the page being rendered for the first time.
The fields in the JSF is being configured dynamically using a database table.
BTW I am using Jdeveloper 10.1.3.5
Thanks
CK

Thanks. I decided to set a Session bean to store the value of the URL parameter (if it is set)
and then to use the session bean to initialize the attributes of the fields on the JSF Page.
There also seems to be some caching of the inputText fields (i.e. it reverts back to the first
initialized value) even though I tried to change it using the URL parameter in the requestScope
backing bean. So, setting the values into the Session bean and retrieving it back from there
seems to be more reliable.

Setting the Field Capture Information

Similar Messages

Maybe you are looking for