Setting the FSB

I got my cpu running at optimum but the problem is i want to raise the FSB from 134 to 166. The problem is its running at 134x15, but in the bios i have the channel selected at x7.0 is there anyway i can change this so i can run 166x12?? Please anyone help.

What CPU and motherboard are you running,  It sounds as your CPU is still locked and therefor you cant change multipliers

Similar Messages

  • AMD 3000+ cannot set the fsb in order to boot

    Hi,
    My system below worked fine with an AMD 2100 chip. I recently bought a 3000+ chip and slotted in to my PC - all booted up fine.  I then changed the FSB within bios to 166 - and then rebooted - the machine didn't boot and I had to clear the CMOS.
    I worked out that I cannot set the fsb to anything above 139 fsb else the machine won't boot and I have to reclear the CMOS...I have no idea what to do
    Anyone got any ideas pleaaaaseee?????
    btw I took the cpu down to the dealer and it worked fine there.
    AMD Barton 3000+ (333)
    2 x 256mb PC2700 ram
    MSI 4800 AGP 8X videocard
    Firewire Card
    DVD RW
    CD RW
    80 Gb HD
    120 GB HD
    PSU 350w - +3.3v / 28a
    +5v / 30a
    +12v / 15a

    Hi,
    Sorry my fault...
    but before I give you my system spec - I stuck in a 550W power supply and all is fine.
    However when I clock it up to 166 system crashes - better ram needed I guess.
    But FSb at 160 is fine....
    Considering its warm weather at the mo - my machie hits around 50 -55 degrees when playing something like fs2004.
    Thanks for your replies guys!
    M
    AMD Barton 3000+ (333)
    2 x 256mb PC2700 ram (non branded)
    MSI KTV4-L MB -
    MSI 4800 AGP 8X videocard
    Firewire Card
    DVD RW
    CD RW
    80 Gb HD
    120 GB HD
    PSU 350w - +3.3v / 28a
    +5v / 30a
    +12v / 15a

  • Cannot set the CPU's FSB clock to 133 anymore. What's wrong ?

    My AMD Athlon 2200+ processor runs now only on dafault value (100Mhz x 133 = 1350 MHz) instead of 1850 Mhz it just to run.
    If I change the values in Bios to what they used to be (133 x 13,5 = 1850 MHz) the computer blank, monitor is black and the PC doesn't response to power button. I can revive the PC by removing and replacing the motherboard's CMOS jumper, but the clock speed stays on that 'underclocked' value.
    Motherboard is MSI KT4V with 'Fuzzy Logic' -program. I've tried to set the FSB clock value back to normal (1850 Mhz) with this Fuzzy Logic by rising the value from 100 upwards, but when the program gets to somewhere around 110 Mhz the whole  system crashes. Windows's blue screen can be seen with the text 'Unexpected kernel trap'.
    So, something is wrong here, but I can not figure out by myself what it is. Can anyone help me ?

    Yes I agree with with Wonkanoby the power supply is the culprit as usual. The forum should have an opening page telling people to check their power supply is powerful enough before posting, the amount of power supply related problems I've read myself alone is massive.
    Get a nice 420 - 450W PSU with at least 24A on the +12V rail if not more. Tagan, Antec, Enermax and OCZ power supplies are the best brands.

  • Whats the highest for the FSB kt3 6380E

    Hi, I am wondering if anyone has managed to get the FSB higher than 152x10.5?
    If so how?
    My system
    Msi KT3 Ultra 6380E
    Xp1600+
    512 Corsair cas 2 PC 2700
    Running Win XP Pro
    Can some please post there settings ect if they have managed to get it above 151.
    I have tried but it crashes and locks me out, I have to clear the cmos to get it to boot up.
    Thanks
    grandad

    Im having the exact same problems...bios wont post past 150fsb..i have the xp1600+ as well locked.
    BUT.......after i get into windows, i can set the FSB up to 160....figure that one out :]
    Quote
    Originally posted by grandad
    Hi, Well i tried setting it to 166x10 no go locked me out again, I then tried it at 155x10 same thing. tried setting the bios to default settings then changing it, same thing.
    This is very frustrating, why is it others can but i for some reason cant and yet i can get it to 150x10.5 Although its a bit unstable
    Also can someone please let me know the optimal seeings for the bios and doi need to enable IDE bus master as its disabled.
    Any help would be greatly appreciated
    Thanks
    grandad

  • OC: can change multiplier but NOT the FSB on K7N2 Delta ILSR XP1800+ TB 'A'

    I have had a good look at the various threads in the forum which to be honest confused me a bit more.  I explain.
    The good news (for me): so far I have successfully changed the clock speed of a Thoroughbred 'A' XP1800+ on a K7N2 Delta board.  Default is 11.5 but 12.5 or 8 are working fine.  On 12.5 the mobo recognises the cpu as a XP2000+.
    The bad news: I cannot change the FSB from 133 to anything else even in Advanced Chipset Features, manual, high performance settings.  Not even a lower one works for this setup.  As said above, the multiplier however IS reasonably overclockable - the system simply won't let me change the default FSB of 133.  
    As far as I understand it, the 1800+ is unlocked even in its TB 'A' version.  So the 'wire trick' won't help me I guess.
    The fairly low spec AGP card?  If so then a lower FSB should be possible.
    The memory should be fine, it's CL2.5 Crucial PC2700 333 DDR.
    BTW: I don't think the PSU is the problem here.  I had a 380W PSU in there (noisy although named silent!) which didn't change a thing.
    Any help or thoughts greatly appreciated!  
    Cheers
    Chris

    I unplugged psu, cleared cmos, applied default bios values.  Then as suggested set multiplier to auto (H/W), reboot, and set the cpu/fsb interface back to Manual.
    And it worked!  Crazy.  The system must have been stuck in some kind of loop...  anyway, thanks very much Wonkanoby for your help!
    After sorting this prob, I gradually raised the FSB to 166 while decreasing the multiplier to 9.5 = 1577MHz.  Temps didn't chage a bit which makes sense for the cpu but I expected the northbridge chip to get a bit warmer.  Don't know about memory.
    Does any of you have experience with OC a Thoroughbred 'A'?  I assume it is less OC'able than a type 'B'.
    Or in other words: where's the limit?
    Cheers
    Chris

  • How do I replace someone else's Mac ID with my own? Bought iPhone second hand. Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his macID on his new iPhone now?? Any ideas, as this issue is blocking my access to iTune

    How do I replace someone else's Mac ID with my own?
    Bought iPhone second hand on TradeMe.
    Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his AppleID on his new iPhone now and, understandably, does not want to give me his password. Any ideas?? Please.
    This issue is blocking my access to iTunes and any other file from my home computer. It keeps on telling me that I have to autorise my computer to pass on files, yet, it seems, for all this to happen, I need to get logged in through the phone's Apple ID. This of course is different to my one on my computer - and I have no password for it.
    This phone is not stolen!! I payed still a fair bit for it. Am still in contact with the previous owner. He doesn't know how to fix the problem either.
    Would appreciate any suggestion ????
    Thanks
    SamSings

    Settings>general>resets>erase all content and settings.
    That will put it back to its out of the box state. Set it up with your own apple Id.

  • Set the cursor busy steered by supanel vi

    I let run a vi and there is a subpanel. Is there a way that I can set the cursor busy steered by the subpanel vi. I pass the reference of the mainvi over a global variable into subvi. Without success there is no error message but the busy cursor does not appear. Just setting the cursor in subvi creates a null window error. Is there a easy way to implement it. Or do I have to use user events in main vi called by suvi an then se it busy. Would be not so nice to understand it later.
    kind regards reto

    I attach my test VI (LV 8.0). You can try it.
    Attachments:
    test sub.vi ‏17 KB
    test.vi ‏22 KB
    test global.vi ‏4 KB

  • In an Excel template file, can I set the Folder Path in the SaveAs Dialog box?

    I have an Excel template file (xltm) and, with help from the forum, I now have a Workbook_BeforeSave subroutine to save the template as a macro enabled file (xlsm).  I’m so thankful for that help from Edward in the forum.
    I also want to set the default folder location to save the file. I really only need it when the template is saved as a new xlsm file, because if they open the xlsm file, it’s usually opened from the default folder path so any save would normally go back
    to where the file was opened.  However, with a template (even if the template is in the default folder) the Saved template reverts back to the user’s documents folder.
    Is there a good way to do this?
    I tried to modify the Workbook_BeforeSave code like this:
    Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
    Dim FolderDir As String
    Dim FileNameVal As String
    FolderDir = "Z:\save\data\place\"
    If SaveAsUI Then
    If Dir(WorkBookFolder, vbDirectory) <> "" Then
    Application.DefaultFilePath = WorkBookFolder
    End If
    FileNameVal = Application.GetSaveAsFilename(, "Excel Macro-Enabled Workbook (*.xlsm), *.xlsm")
    Cancel = True
    If FileNameVal = "False" Then 'User pressed cancel
    Exit Sub
    End If
    ThisWorkbook.SaveAs Filename:=FileNameVal & ".xlsm", FileFormat:=xlOpenXMLWorkbookMacroEnabled
    Application.EnableEvents = True
    End If
    End Sub
    But there are a lot of checks that would need to be done.
    I'm not sure how to only default the folder saved only when they open the template, but not change it when they just open an already saved Excel file created by the template (with all the active content, macros, etc.).
    Alan Edwards

    Hi Alan,
    store the path\filename in the 1st argument:
    FileNameVal = Application.GetSaveAsFilename("C:\*.xlsm", "Excel Macro-Enabled Workbook (*.xlsm), *.xlsm")
    Andreas.

  • Setting the JMS Header from Payload

    Hi Experts,
    My requirement is to send the payment data coming from ECC to non sap system.Sender adapter is proxy and receiver is JMS.ECC will be sending the filename in one field and payload content as a string in another field.PI has to set the filename coming from ECC in JMS header property.What configuration changes should i need to make in JMS adapter to achieve it?
    Converting the XML to string is possible in PI.But my question is converting the string XML data into XML fields is possible in SAP PI?If so how to do that?
    Please provide your suggestion.
    Regards,
    Karthiga

    Hi Karthiga,
    The UDF is there in blog
    DynamicConfiguration dynamicconfiguration = (DynamicConfiguration)param.get("DynamicConfiguration");
                DynamicConfigurationKey dynamicconfigurationkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS", "DCJMSMessageProperty0");
                String s = dynamicconfiguration.get(dynamicconfigurationkey);
                CorrID.append(s);
    Please let me know if you have any issue.
    regards,
    Harish

  • Unable to set the Cursor focus on a particular field in OA Page

    Hi,
    I have a custom page with 3 controllers . Now when i delete a row from the Advance table, the focus of the cursor goes to the top of the page. My requirement is that, the focus should remain in the Advance table region itself.
    I tried to set the focus using the below code. It dosent work. Could there be an issue since iam using more than one controller for the page?
    OABodyBean bodyBean = (OABodyBean)pageContext.getRootWebBean();
    bodyBean.setInitialFocusId("item164"); // item164 is the messageTextInput field in the Advance table region.
    I tried to get the Initialfocus value after its set. The value shows as 'item164'. However , it doesnt focus on that item.
    Please help me out in fixing this issue.
    Thanks
    AG

    Hi,
    Thanks for the Info. Can you help me with this java script or if you can provide me any reference it would be hepful.
    Basically the focus has to stay in that particular AdvanceTable region where the row is deleted. Not required that the focus has to point to the next row after the delete.
    Thanks
    AG
    Edited by: 928445 on Apr 26, 2012 12:06 AM

  • Unable to 'set the default source system' to Install Business Content

    Hi,
    Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
    I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
    When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
    Could you please help me out?
    Thank you.

    Hi,
    It seems to be a bug in version 3.5.
    Do like this:
    After you open the screen to <i>choose the dafault source system</i>
    Clcik on 3rd button(F6) available in the bottom of the scrreen.
    And then select teh tick mark for required system.
    And then click on Continue button
    You have do this step before you drop the cube to right side of the cube.
    Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
    Drag and drop required cube with dat flow before.
    Now you can see the Transfer rules with selected Source system only in the collected Objects.
    With rgds,
    Anil Kumar Sharma .P

  • How to set the table input in Query template?

    Hi all.
    I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
    form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS).  But if i set the same xml structure  in
    query template, I didn't get the output. Table input parameter does not take that xml source.  How to set the table input in Query template?
    can anyone help me?
    Regards,
    Hemalatha

    Hema,
    You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
    Sam

  • How to set  the  table I_ORG in 'BBP_EXTREQ_INBOUND'?

    dear all,
      Now I am using BAPI 'BBP_EXTREQ_INBOUND' to create a shopping card and have successed.
      but  in the table I_ORG,   whatever I set the value of  organization ID and group ID, it will not be changed in the SRM.
    how can I set them?
       t hank you!

    hi ,
    you can use BADI --> BBP_PGRP_ASSIGN_BADI in your SRM system and make changes according to your own requirements.
    if you make changes using the above BADI --> then changes should be updated in the newly created shopping cart.
    this is because , the above BADI is called ---> in the
    BAPI 'BBP_EXTREQ_INBOUND' .
    check out the following sequence --->
    BBP_EXTREQ_INBOUND ---> calls
    FM BAPI_SCEC_CREATE ---> calls
    {BAdI - BBP_PGRP_ASSIGN_BADI -
      PERFORM sc_pgrp_assign_badi TABLES lt_i_items             "XMZSP02AO
                                         lt_i_account           "XMZSP02AO
                                         lt_i_partner           "XMZSP02AO
                                   USING ls_i_header            "XMZSP02AO
                                CHANGING lt_i_orgdata[]         "XMZSP02AO
                                         return[].              "XMZSP02AO

  • Unable to set the selected value for a ADF LOV

    Hi,
    I am developing an application using jdeveloper 10.1.3 and Struts.
    I have created a ADF LOV on my JSP Page as given below:
    <html:select property="lob" onchange="javascript:selectLOB(this.form)">
    <html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
    </html:select>
    When i submit the form, i am able to get the value of the selected Value in the List.
    JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
    Row r = (Row) listBinding.getSelectedValue();
    String SoLob = (String) r.getAttribute("LobLob");
    But i am unable to set the selected value back in the list when i return to the form again.
    I tried the following:
    int x = listBinding.getSelectedIndex();
    listBinding.setSelectedIndex(x);
    It would be really helpful if some one could let me know what needs to be done.
    Thanks,
    Subashini

    Gyan,
    I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
    "Rendered" on the field so that based on search parameters we can hide result table column.
    After searching online, I modified the controller code as follows
    1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
    2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
    3. Modified the controller code as follows :
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
            OADBTransaction txn = am.getOADBTransaction();
            if (testvo != null)
              OARow row = (OARow)testvo.first();
                if (a.equalsIgnoreCase("Approved"))
                     row.setAttribute("Testrender", Boolean.FALSE);
                else
                     row.setAttribute("Testrender", Boolean.TRUE);
            } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
    Its using only the value of one search parameter but not the second one .
    The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
    So can you please let me know how to proceed from here ?

  • Setting the value of a single attribute for multiple line items

    Hi all,
    I am working on a Web Dynpro application, I have created this applicaion for an accounting document so it has header data and multiple line item data. As per the requirement I have to put the following logic:
    1. When a user enters a value in the field KBLNR on the line item, all the other fields like cost centerm fund, functional area should populate from a database table based on the value of the KBLNR. to get this I have put the following code:
    TYPES: BEGIN OF t_kblp,
              fipos     TYPE kblp-fipos,
              kostl     TYPE kostl,
                      END OF t_kblp.
      DATA lv_kblnr TYPE wd_this->element_t_bseg-kblnr.
      DATA: lt_kblp TYPE STANDARD TABLE OF t_kblp,
            wa_kblp LIKE LINE OF lt_kblp,
            lt_bseg              TYPE STANDARD TABLE OF bseg,
            wa_bseg              TYPE bseg.
      DATA lo_nd_t_bseg TYPE REF TO if_wd_context_node.
      DATA lo_el_t_bseg TYPE REF TO if_wd_context_element.
      DATA: ls_t_bseg TYPE wd_this->element_t_bseg,
            lo_api_controller    TYPE REF TO if_wd_controller,
            lo_message_manager   TYPE REF TO if_wd_message_manager,
            lo_nd_tbseg          TYPE REF TO if_wd_context_node,
             lo_el_tbseg          TYPE REF TO if_wd_context_element,
             lt_el_tbseg          TYPE wdr_context_element_set,
             lv_bseg              TYPE bseg.
      lo_nd_t_bseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
      lo_api_controller ?= wd_this->wd_get_api( ).
      CALL METHOD lo_api_controller->get_message_manager
        RECEIVING
          message_manager = lo_message_manager.
      lo_nd_tbseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
      lt_el_tbseg = lo_nd_tbseg->get_elements( ).
      LOOP AT lt_el_tbseg INTO lo_el_tbseg.
        lo_el_tbseg->get_static_attributes(
                               IMPORTING static_attributes = lv_bseg ).
      IF lv_bseg-kblnr NE ' '.
          SELECT belnr
                 fipos
                 kostl
                 PSPNR
                 geber
                 saknr
                 fkber
                 grant_nbr
                 gsber
                 FROM kblp
                 inTO corresponding fields of wa_kblp
                 WHERE belnr = lv_bseg-kblnr and
                      saknr = lv_bseg-saknr.
            ENDSELECT.
    lo_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
    * get element via lead selection
            lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
    lo_el_tbseg->set_static_attributes(
                               EXPORTING static_attributes = wa_kblp ).
       CLEAR: lv_bseg, wa_kblp.
      ENDLOOP.
    everything is working fine but now the problem is couple of fields that I have in wa_kblp are with different names in bseg table and hence they are not updating... I tried putting the following logic within the loop :
    lo_el_t_bseg->set_attribute(
        name =  `PROJK`
    value = wa_kblp-pspnr ).
    but it's only setting the value of the first line item and not working for the multiple line items, can you please tell me how can do this?
    Thanks,
    Rajat Garg
    Edited by: rajatg on Jun 24, 2011 5:09 PM

    Hi Chris,
    I tried your code and it worked fine but after I put this code I am getting another issue. within the loop I had a code to make the fields non modifiable on the screen and was working fine but now what's happening is it's making the all the lines uneditable except the one with data on it (which is completely opposite), this is what I have coded:
    LOOP AT lt_el_tbseg INTO lo_el_tbseg.
        lo_el_tbseg->get_static_attributes(
                               IMPORTING static_attributes = lv_bseg ).
    IF lv_bseg-kblnr NE ' '.
      SELECT belnr
                 fipos
                 kostl
                 PSPNR
                 geber
                 saknr
                 fkber
                 grant_nbr
                 gsber
                 FROM kblp
                 inTO corresponding fields of wa_kblp
                 WHERE belnr = lv_bseg-kblnr and
                      saknr = lv_bseg-saknr.
            ENDSELECT.
    move: wa_kblp-belnr to wa_bseg-kblnr,
    wa_kblp-fipos to wa_bseg-fipos,
    wa_kblp-kostl to wa_bseg-kostl,
    wa_kblp-pspnr to wa_bseg-projk,
    wa_kblp-geber to wa_bseg-geber,
    wa_kblp-saknr to wa_bseg-saknr,
    wa_kblp-fkber to wa_bseg-fkber,
    wa_kblp-grant_nbr to wa_bseg-grant_nbr,
    wa_kblp-gsber to wa_bseg-gsber,
    lv_bseg-dmbtr to wa_bseg-dmbtr.
    append wa_bseg to lt_bseg.
    lo_nd_edit_property = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG.EDIT_PROPERTY` ).
          get element via lead selection
          lo_el_edit_property = lo_nd_edit_property->get_element( ).
          lo_el_edit_property->set_attribute(
            name =  `EDIT_FIELD`
            value = 'ABAP_TRUE' ).
          lo_el_edit_property->set_attribute(
            name =  `EDIT_WBS`
            value = 'ABAP_TRUE' ).
    endif.
    endloop.
    o_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
    get element via lead selection
            lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
      CALL METHOD lo_nd_t_bseg->bind_table
        EXPORTING
          new_items            = lt_bseg.
    Can you please see what I am doing it wrong here....

Maybe you are looking for