Setting the PF Status for ALV
Hi all,
How it would be possible to create a PF Status for ALV display. I want to add one button my ALV report.
Thanks.
Harshad.
Hi ,
You can create PF-status using the Statement : set pf-status 'STATUS_NAME' in a FORM as shown below:
form frm_status using rt_extab type slis_t_extab.
set pf-status 'STANDARD'.
endform.
Double click on the STATUS_NAME and it Navigates to the Screen Painter. There you can specify the Menu , Buttons as required.
Instead of cretaing a new status you can also copy the existing Standard status as told above and use the required buttons / menu items.
Now to handle the operations of these buttons :Include in a form as below
form frm_usercommand using r_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case r_ucomm.
when 'SUB'.
<opertion as required>
when 'SUB1'.
<opertion as required>
endcase.
Endform.
Pass these two form names to the FM REUSE_ALV_GRID_DISPLAY ( Parameters of FM : i_callback_pf_status_set & i_callback_user_command ) and the result will be dispalyed with the new Status to the parameters .
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = v_repid
i_callback_pf_status_set = 'FRM_STATUS'
i_callback_user_command = 'FRM_USERCOMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = it_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = it_event
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_vbak
exceptions
program_error = 1
others = 2
Regards,
Radhika.
Similar Messages
-
BAPI/FM for setting the user status for the Project definition and WBS elem
Hi,
I have to set the User Status for the Project Definition and the WBS elements in that project.
The User status to be set is the same for the project and wbs elements.
Please let me know if there is any BAPI/FM to set the user status..
Thanks in advance.
Regards
ShivaHi Shkithija,
There is a dump encoutered in the form "PS_FLAG_GET_GLOBAL_FLAGS" for 'chk_precommit_ok' in the "BAPI_PS_PRECOMMIT".
But it is showing SY-SUBRC = 0 when used along with BAPI_TRANSACTION_COMMIT.
May i know what are input parameters we need to pass it to "BAPI_PS_PRECOMMIT".
Do you have any idea.
Please let me know
Regards
vishnu -
How do I set the response status code for a request in ADF?
For example:
I have a page accessible like page.jspx?id=$ID, in which $ID identifies an object stored in a database. The user navigates to page.jspx?id=abc. abc does not exist or has been deleted. I wish to set the response status code to 404 for the page request, like, for instance, https://docs.google.com/spreadsheet/ccc?key=abc does. How do I do this?
PS: Changing the status code for subsequent partial submits on the page if the object is deleted while the user is on the page (e.g. if the user attempts to delete an already deleted object through a "Delete" button on the page) may also be desirable, but would probably not fit in as well with the ADF lifecycle or be as useful.Maybe I should be more specific about the current state of the code. It's something functionally similar in relevant portions to the following. For the purposes of this code, assume the ID maps only to a name, rather than a more complicated object:
page.jspx looks like:
<?xml version='1.0' encoding='utf-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:trh="http://myfaces.apache.org/trinidad/html" version="1.2">
<jsp:directive.page contentType="text/html;charset=utf-8" />
<f:view>
<af:document binding="#{pageInitializer.dummyComponent}" title="#{pageData.name != null ? pageData.name : 'Object Not Found'}">
<af:outputText rendered="#{pageData.name != null}" value="#{pageData.name}" />
<af:outputText rendered="#{pageData.name == null}" value="No object was found at this URL." />
</af:document>
</f:view>
</jsp:root>pageInitializer and pageData are pageFlow-scoped beans with the following code:
class PageInitializer {
@Inject private PageData pageData;
@Inject private NameDao nameDao;
@PostConstruct
void initialize() {
String name = nameDao.getNameById(FacesContext.getCurrentInstance().getExternalContext().getRequestParameterMap().get("id"));
if (name != null)
pageData.setName(name);
else
// TODO: Set status code 404
public void setDummyComponent(UIComponent dummyComponent) {
public UIComponent getDummyComponent() {
return null;
public class PageData {
private String name;
public String getName() {
return name;
public void setName(String name) {
this.name = name;
}The code initializes the data from the database through the initilaizer of a pageFlow-scoped bean with a dummy setter for the document because I read somewhere that that would work, and it seems to work, even though it seems hacky.
Ideally, the code would render the 404 where it currently says (// TODO: Set status code 404). I realize this may not even be possible given the current architecture, because part of the response body has already been rendered, and I believe, but cannot find a source to cite, that the status code and headers cannot be set after the body has started being rendered. Is there any architecture that would get me this page's functionality (even if it's two JSPXs on the backend (which might be ideal)) and be able to render a 404 for an inexistent object?
Edited by: 907794 on Feb 1, 2012 3:55 PM
Edited by: 907794 on Feb 1, 2012 3:58 PM -
How to Set the APPR status in Background for service orders
Hi Friends,
could anybody please ,let me know how to set the APPR satus for the seleted service orders( IW32) in background?
Regards,
Xavier.P.Hi,
Thanks for the reply and you are correct, I am using BADI and I am calling this BAPI inside the method.
Now I am trying to execute this BAPI from SE38 and I am getting the error message, "Error in processing ,Function was not executed". I am able to see this message in the return parameter of the BAPI (Error type - 'E'). And it is giving dump after the call to BAPI_TRANSACTION_COMMIT.
I am using conversion routine 'CONVERSION_EXIT_ABPSN_INPUT' before passing the WBS element to the BAPI.
Please help in this regard.
Regards,
V Kumar
Edited by: V Kumar on Jun 26, 2009 1:42 PM -
Troubleshoot-Adapter engine:Error Setting the message status to DLNG failed
Dear Experts,
We use SAP RFC- PI-JDBC(MSSQL). here the Data(message) successfully transfered to mssql table but the status is been set to DLNG failed, And it finally shown as SYSTEM ERROR.
QoS required: ExactlyOnce , here The Message has got inserted in that particular table and in PI adapter the status turned to DLNG faild and the service again tries to send the same message which is not possible becoz the data is set for primary value.
2010-09-15 09:59:48 Success Message successfully received by messaging system. Profile: XI URL: http://XXXXX:50000/MessagingSystem/receive/AFW/XI Credential (User): YYYY
2010-09-15 09:59:48 Success Using connection JDBC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2010-09-15 09:59:48 Success Message successfully put into the queue.
2010-09-15 09:59:48 Success The message was successfully retrieved from the receive queue.
2010-09-15 09:59:48 Error Setting the message status to TBDL failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 09:59:48 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 09:59:48 Success MP: Entering module processor
2010-09-15 09:59:48 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 09:59:48 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 09:59:48 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 09:59:49 Success Database request processed successfully
2010-09-15 09:59:49 Success MP: Leaving module processor
2010-09-15 09:59:49 Success The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2010-09-15 09:59:49 Error Setting the message status to DLNG failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 10:37:01 Success The message was successfully retrieved from the receive queue.
2010-09-15 10:37:01 Success The message status set to DLNG.
2010-09-15 10:37:01 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 10:37:01 Success MP: Entering module processor
2010-09-15 10:37:01 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 10:37:01 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 10:37:01 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
Thanks in advance for your valuable answer.Hi Vinaygam,
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
See above error, It cannot the Duplicate Key in your log table. Duplicate means repeated as a same data.So kindly check once your data.
IF,I assume your scenario is Synchronous, If you are using any sender JDBC adapter just check with your Quality of Service and set it to "Exactly once".
so kindly do it.
Thank you,
Sateesh
Edited by: sateesh kumar .N on Sep 17, 2010 8:17 AM -
Changing the System status for previous transactions
Hello,
Could some body help me with this ?
I have a User status profile with user status ABC which triggers system status Inprocess. This is applicable for all the new transactions for which we set the status ABC which works fine. But we have some previous transactions ( Prior to this config ) with status ABC , but system status is not Inprocess.
How can we change the system statuses for all these transactions? do we have a report for this?
Best Regards,Hi,
You can use 'STATUS_CHANGE_INTERN' FM to change the system status. Pass Object number and status ID as inputs to the Function Module.
Regards,
Lakshmi.Y -
ABAP Program to set a set the QM Status of a set of REquests to RED
Hai friends,
I have an urgent requirement. I need to set the QM status of about 100 requests and delete them from 3 infoproviders. Can anyone help me out with an ABAP program to do it, if it is possible?
Regards,
Neha SolankiTry modifying entries for tables RSREQDONE, RSMONICTAB whereever necessary.
-
Set a User Status for Quality Notifications only if they are "Activated".
Hello experts:
I need to be able to set a User Status for Quality Notifications only if they are "Activated".
When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification". Initially, the only difference between the inactive "Defect Notification" and the active "Quality Notification" is that the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
I checked the business rules for status DEFR and found that the following processes clear this status
PMM1 - Postpone Notification
PMM2 - Put Notification In Process
PMM3 - Assign Order
PMM6 - Put Notification In Process Again
Any Ideas ?Perhaps some additional information would help you understand what I need to do.
For notification type F3, we are recording all defects found in production.
Most of these are expected defects that result in a minor reduction in yield.
For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
When this happens we manually activate the notification and assign tasks to find and correct the cause.
It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing. I therefore want to use the Activation event as the trigger to set my user status. -
Setting the GUI Status - URGENT
Hi Experts,
Is there any way for setting the GUI Status other than se41.
What's the difference between Status and Status list?
Can anyone help me out of this?
Thanks and Regards,
Swamy KuncheHi Swamy Kunche ,
GUI Status :
A GUI status is a subset of the interface elements used for a certain screen.The status comprises
those elements that are currently needed by the transaction .The GUI status for a transaction may be composed of the following elements:
-Title bar.
-Mneu bar.
-Application tool bar
-Push buttons.
GUI List:
GUI List Displays a list of all GUI statuses for the current program
Thanks,
Greetson -
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
How can i set the alternating colors for a table rows
Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM -
How do I set the delivery policy for a queue in iMQ 2.0?
The list on page 67 of the 2.0 administration guide appears to be
incomplete. Specifically, I'm interested in knowing how to set
the default delivery policy for a Queue through the jmqobjmgr command.
I need the valid attribute name to pass in to jmqobjmgr.The "queueDeliveryPolicy" is an attribute of a queue
created in the broker - not in the administered object
destination so that is why you are not seeing that
attribute on the list on page 67.
By default, the broker by will use the "single" queue delivery
policy unless you choose to change the values of the property
"jmq.queue.defaultdeliveryPolicy" to SINGLE, ROUND-ROBIN, or
FAILOVER. If you would like to do this, see the Chapter 4
in the admin guide on "Starting and Configuring the Broker".
It may be easier to set the delivery policy for just one queue.
To do this, you can use the following command:
jmqcmd create dst -n myQueue -t q -o "queueDeliveryPolicy=f"
where valid values to queueDeliveryPolicy is f, s, r.
You can do a 'jmqcmd -H' to get more info on queue attributes or
see Chapter 6 in the admin guide on "Creating and Destroying Destinations". -
How do I set the aspect ration for 4:3 or for 16:9?
How do I set the aspect ration for 4:3 or for 16:9 in Adobe PE12?
PulcinellaNM
What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so. That is all background information for now.
As for the question that you are posting....
I think we need to go a lot deeper into what you are doing. Here are some considerations
The aspect ratio setting is in the import settings. In Premiere Elements 12 Expert workspace, the project automatically sets the project preset based on the properties of the first video file that you drag to the Expert workspace Timeline. If your video's properties include a 16:9 flag, then the project settings will have a 16:9 flag (aspect ratio). If you do not want the project to set the project settings automatically, you can set the project settings yourself manually with File Menu/New/Project and then import your source video.
If a problem exists where imported 16:9 video is presenting in Premiere Elements as 4:3 instead of 16:9 (typical of the JVC .mod file issue), then you can set the pixel aspect ratio under Interpret Footage feature inside the project workspace.
At this point, I think it best for you to give more details and background behind your question so that we can be sure that we are giving you the information that you need to succeed in your projects.
If you need clarification on anything written, please do not hesitate to ask for clarification.
Thank you.
ATR -
Photos will not allow me to set the key picture for the album or event
Photos will not allow me to set the key picture for the album or event - it is set to grey !
Anyone else had this and found why ?
new PHOTO app replacing iPhoto bugs/ Problems OTHER PROBLEMS :
- no longer has a five star rating system
- my keywords for selecting albums are gone.
- cannot copy location of one photo to another
- cannot have an album with keywords AND rating > a value
- cannot set key photo of album/event
- multi parameter search feature gone
Anyone got any ideas how to get around this terrible downgrade of the software ?
BTW I have just discovered that iPhoto and its' libraries are still there, so I can go back but be left behind and frozen in time on this version if I do.
Photos now take up 700Gb whereas it was 350Gb #@!$#@!@#!@#
ThanksThat are all good points - but Photos is a completely new application. and it is only version 1.
Continue to use iPhoto, girraween; the next update to Photos will probably add a few more features.
iPhoto 9.6.1 is working very well with MacOS X 10.10.3.
The migration let iPhoto installed and also your iPhoto Library will still work with iPhoto.
If you did not uninstall iPhoto, it will still be there in your Applications folder. And if you had updated to the latest version iPhoto 9.6.1 before you upgraded to MacOS X 10.10.3, you can simply drag iPhoto back to the Dock from your Applications folder and continue to use it. Double click iPhoto and confirm, that you want to open iPhoto and not Photos. It is not compulsory to use Photos, while it it still the first release. When you launch iPhoto, you will see a warning, that the iPhoto Library has been migrated to Photos, but simply click the "Open iPhoto" button.The library will still work with iPhoto. ()see: If Photos won't open a library that you already migrated - Apple Support
If your iPhoto version is not iPhoto 9.6.1, you need to update it.
See this User Tip:
Usually it will work to reinstall instead of updating:
Get iPhoto 9.6.1 if you didn't update before OS... | Apple Support Communities
The main idea is to move the iPhoto app to the Trash, so Spotlight does not see it as installed, reload the AppStore, and then to try to download again from the App Store - from your Purchases tab, not from the main page, since you can neither buy iPhoto nor update it, but you can reinstall, if your AppleID is associated with it.
Meanwhile you may want to send a feature request to Apple using the feedback form. Apple - Photos - Feedback
I hope, Apple will listen and add more features to Photos to make it usable for large Photo Libraries. -
"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb
Maybe you are looking for
-
I don't know how to keep info on iPhone from being erased while sync?
I had to format my c: drive and now I'm wanting to sync my phone but it informs me that all data will be erased when syncing. How can I get around this?
-
I would like to be able to use my IPAD. Itunes will not install. It tells me it cannot start Apple Mobile Device Services I am using XP service Pack 3. I am the administrator. The message also says to verify that I have sufficient privileges to start
-
HOW TO SHARE YOUR FILES ON THIS FORUM
Since we cannot upload file to the forun directly, how can they be shared? You can upload your files to dropbox, Adobe Cloud (you should have it with your cloud subscription), or any other storage area on the internet. You want to keep your files pri
-
Master-detail form problem after upgrading to 4.1
Hello, I have running Apex 4.0.2 instance on 11g2 database. After upgrading to Apex 4.1 I have a problem with all Master-detail forms. I'm able to open the one but detail region shows error 'failed to parse SQL query: ORA-00923: FROM keyword not foun
-
I've run the validation checker on a document that I've been having fit's with and here is the report...what exactly do I do with it and how do I fix these errors? I thought I had things going smoothly till I wanted to publish, only to find out that