Setting the "reasons" for signing in Acrobat XI Pro?

I would like to set the reasons for signing a document in my digital signature. However, I can't find any place that lets me enter that information.
For example, I want to enter something like "To confirm my participation"
I have found quite a few support docs but they all refer to Acrobat X Security Prefs which are different from Acrobat XI.

In Acrobat 11: Edit (or Acrobat on Mac) > Preferences > Signatures > Creation & Appearance > More > Show Reasons
or did you want to add a customized item to the list of reasons that you're presented with?

Similar Messages

How to sets the Reason for Rejection of the Open Sales Order Lines

Hello gurus,
          I want to set the Reason for Rejection of the Open Sales Order Lines, Case is like :
If current date is exeed the Auto Void Confirmed Back Order Days(for item level) + date (last responding from customer), then reason for rejection should be set, So i want the logic to find out the date is exceed or not.
Thanks
Anjana

Hello anjana,
   Actually your question is some confusing, but if u want to get eldest change as active sales order then logic is as follows:
1. On base of OBJNR u have to get UDATE from JCDS table
2. then write logic as:
SORT i_jcds BY objnr stat chgnr DESCENDING.
      LOOP AT i_jcds INTO wa_jcds1.
        CLEAR lv_stat.
        lv_stat = wa_jcds1-stat.
        AT NEW objnr.
          AT NEW stat.
            CLEAR: wa_tab.
            wa_tab-objnr = wa_jcds1-objnr.
            wa_tab-stat = lv_stat.
          ENDAT.
        ENDAT.
        IF wa_jcds1-inact = 'X'.
          CLEAR lv_tabix.
          IF sy-tabix > 1.
            lv_tabix = sy-tabix - 1.
          ELSE.
            lv_tabix = 1.
          ENDIF.
          READ TABLE i_jcds INTO wa_jcds2 INDEX lv_tabix.
          IF sy-subrc = 0.
            wa_tab-chgnr = wa_jcds2-chgnr.
            wa_tab-udate = wa_jcds2-udate.
            wa_tab-utime = wa_jcds2-utime.
            APPEND wa_tab TO i_tab.
          ENDIF.
          CONTINUE.
        ELSE.
          wa_tab-chgnr = wa_jcds1-chgnr.
          wa_tab-udate = wa_jcds1-udate.
          wa_tab-utime = wa_jcds1-utime.
        ENDIF.
        AT END OF objnr .
          AT END OF stat.
            APPEND wa_tab TO i_tab.
          ENDAT.
        ENDAT.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM i_tab COMPARING objnr stat.
      SORT i_tab BY objnr stat udate utime.
      DELETE ADJACENT DUPLICATES FROM i_tab COMPARING objnr.
3. now in i_tab table u'll get eldest UDATE
Hope its work for u.
Thanks & Regards,
Sumit Joshi

Where is the Url for free Adobe Acrobat X Pro that will allow me to create PDF/X ‑1a requires all fonts to be embedded,

Is there a free copy of Adobe Acrobat Pro that will allow me to create PDF/x‑1a with all requires all fonts to be embedded. I already have Adobe Acrobat Pro XI.

The Standard joboptions that are used by default don't embed most so-called system fonts.
Change your joboptions to High Quality Print and you will get Arial embedded plus much higher quality imagery.
BTW, PDF/X is great (I'm actually Chair of the PDF/X standards committee), but PDF/X-1a created by using the PDF/X-1a joboptions ruins output by flattening transparency, yielding stitching and other image artifacts that you can see both on screen and print if your document has any transparency (including drop shadows, reflections, and even clipped images). It also forces all content to CMYK. PDF/X-4 is a better choice.
What are you creating the PDF file from? Microsoft Office documents? Adobe layout programs such as InDesign?
Let us know and we can give you a more focused recommendation as to what to do.
- Dov

Illustrator keeps quitting-notice others have had similar issues, not resolved-so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help-come on-someon

Illustrator keeps quitting…notice others have had similar issues…so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help…come on…someone has to have an answer…HELP Pleeeeease

<moved from Adobe Creative Cloud to Illustrator>
reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

How do we set the permissions for....

Using Acrobat 9, Setting permissions is very confusing!
How do we set the permissions for document so that:
-- the end user needs no password
-- Printing: Allowed
-- Changing the Document: Not Allowed
-- Doument Assembly: Not Allowed
-- Content Copying: Not Allowed
-- Content Copying for Accessability: Not Allowed
-- Page Extraction: Not Allowed
-- Commenting: Allowed
-- Filling of Form Fields: Allowed
-- Signing: Not Allowed
-- Dreating of Template Pages: Not Allowed

Not possible. If you allow filling in forms you must allow signing. BTW, while it is nice to be able to set permissions anything that depends upon passwords that you set is easily overcome by third party utilities. Don't do anything that really depends upon these permissions. If you want to set permissions using the Document Properties Dialog box (control D), then click on the Security button. In the Security Method Dialog box, select password security and fill it out as you need.

How can I disable the Reason for Rejection field in VA02 line items

Hi,
I dont want the users to be able to change the reason for rejection field in the sales order line items. Can someone please suggest a tried and tested way of doing this
Thanks for reading.

Set up an auth object for the field. In userexit field modification check the auth object and set the field to be grayed out if they don't have authority. Users can then not change the value of the field Sample code
IF screen-name = 'VBAP-ABGRU'.
       AUTHORITY-CHECK OBJECT 'Z_BLK_REAS'
               ID 'ABGRU' DUMMY.
      IF sy-subrc EQ 0.
        screen-input = 1.
      ELSE.
        screen-input = 0.
      ENDIF.
ENDIF.

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...

What are the reasons for disabling the saving of data in a PDF?

I seem to have had more than my share of encounters lately with PDF files that have editable fields but have their data saving capability disabled.
In some of these situations this has been an absolutely maddening inconvenience.
When I attempt to bring this to the attention of whomever's responsible I get brushed off.
One person's response was: Actually the majority of the PDF forms I have are Adobe reader and you cannot make changes electronically at all. The reason for this is to make sure that the documents are not altered in any way. The <companies creating the PDFs> must make sure that changes are not being made to their forms.
I just don't understand that. How is entering and saving data 'altering' a PDF?
Is this just bone-headed bureacracy, an urban legend, or is there some fundamental practical matter I am not aware of?

Saving a filled-in form has always been disallowed with Adobe Reader, formerly known as Acrobat Reader. Though there are a few exceptions...
History lesson:
Forms features were first introduced in Acrobat 3. As you might imagine, a number of folks wanted to be able to save filled-in forms using Acrobat Reader. Since this functionality simply was not a feature of Reader, it was not possible. If you wanted to save a filled-in form, you needed to use Acrobat (Exchange).
Upon recognizing the potential market for a product that they could sell, Adobe developed and released Acrobat Business Tools, which was a version 4 product. It was positioned between Reader and Acrobat, was reasonably priced, and allowed users to save filled-in forms, apply digital signatures, and add comments. Unfortunately, this was marketed poorly and did not achieve commercial success.
The next iteration was a similar product named Acrobat Approval, which was a version 5 product. It too could save a filled-in form, but was in some ways more limited than Business Tools, and suffered a similar fate. That is, it was not a market success. It was however distributed for free to US taxpayers on the IRS tax products CD-ROM.
The next idea from Adobe - which was a good one - was to provide for a means of embedding usage rights in a PDF document. These rights would allow Reader to do things it normally would not be able to do, such as saving a filled-in form, adding comments, importing/exporting form data, creating new pages using templates, connecting to databases and web services, etc. At first, the only way to enable these usage rights was with an expensive product from Adobe, so the potential was initially not realized.
With the release of Acrobat 7, Acrobat users were able to add some usage rights, such as commenting. While this was a welcome addition, folks still wanted to be enable forms to be saved with Reader. Finally with the release of Acrobat 8 Pro, users were able to enable forms to be saved with Reader, but it came with licensing restrictions. In short, if the licensee distributed the form for more than 500 recipients, the licensee could use data from no more that 500 copies of a particular form that was returned to them, including hardcopies. This was great for forms used inside of an orginization, but not so great for forms that needed to be used by the general public. Still, it was a very useful feature for a majority of businesses for internal forms, the vast majority of which have fewer than 500 employees.
Acrobat 9 or 10 didn't change things. Adobe still wants to capitalize on this market, which certainly is not a bad thing for Adobe and their stockholders. The US IRS forms have long been saveable with Reader because they licence Adobe Reader Extensions, which provides revenue for Adobe.
Note that some third-party PDF viewers allow users to save filled-in forms whether or not the documents have usage rights. Such software has a different marketing model than does Adobe Reader/Acrobat, and rides the coattails of Adobe by taking advantage of the popularity of PDF forms.

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

HT204003 if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??

if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??

actually i found out how to fix it
1 sign out of apple account
2 close down passbook app
3 change year to 2013
4 reopen passbook and sign in at the button with your apple ID
5 change the time to auto update and it should work from now on.
this worked for me let me know if it work for you:)

What's the reason for " 'Writing XMP Metadata' did not complete successfully

I rightclicked an image and selected "save metadata to file" and got this not-so-very-informative error message. What could be the cause? The file is there and it is not write protected.
Adobe - what about giving some more information when LR encounters errors?
Win XP, LR 1.3.1

While read only is the most likely cause, I have been trying to track down a similar problem which so far I can only equate to the creation time of the file ending in 00.
For example, I have a file taken at 6/13/2006 1:00:00 PM
If I do Metadata -> Edit Capture Time...
and set the time to be 6/13/2006 1:00:01 PM
Then click twice on the Resolve Conflicts button for Metadata, the second one works. Both times I tell it to overwrite the metadata on disk. My assumption is that the data processing logic has issues reading in entries like:
2006-06-13T13:00:00-08:00
I would even go so far as speculating it treats them as just the day and drops the hour / minute portion. The reason for this conjecture is that I stumbled on this issue when exporting images would occasionally have 2006/06/13 12:00AM as the timestamp and when I checked which ones had problems, they all were taken at 00 seconds into the minute.
Henrik, if you are still having this problem, does the file happen to have a 00 second creation timestamp? If so, try changing it by a second and I would be curious if you it starts working for you too.
Cheers,
John

What is the reason for this error? after export part of movie broken

hi, i cannot find the reason for this strange error that happaned to me for the first time, you can see the outcome here:
http://picasaweb.google.com/p.cardash/IMovieBug/photo#5164317113276584274
after exporting in imovie to h264 .mov file, from HDV project, resolution is twisted, plus, the part that was supposed to fit hole screen, is black and sometimes with little graphic errors.
i tried about 10 times, with different setting, resolutions, and other parameteres.
after exporting for ipod, everything is ok, in m4v format.
what is wrong? i use the same method for creating and also for exporting, as in previous projects. i didnt use any new transitions, efects nor titles...
any thoughts?
best to You,
Piotr

ok, i think that i know where is the problem, but i still dont what is it
ive copied my file to a new mac with just installed imovie and everything is the same,exactly the same output. so 100% positively the problem is within the particular project.
i didnt check my mackbook with TT, since i dont have it and dont want to pay i thought its for free
i`ll try later to figure out what wrong and what part of the project is bad.
for now, i think i hate imovie again :)) piece of..
let me know how your case ended.

Oracle modrator ---please explain the reason for locking thread

Hi,
https://forums.oracle.com/thread/2583144
and your active discussion at
https://forums.oracle.com/thread/2583143
the first above mentioned 2 threads for creating character sets with existing database without taking backups.It was crucial tasks and below mentioned thread was creating new database and find out the ways for charactersets .both are different threads and ways to work and as well as methodology
i will be highly greatful , if u can explain the reason for blocking below mentioned thread
creating addtitional database
thanks

It is all the same issue.
... manipulation and/or creation of databases with changes in character sets and how those character sets influence the functionality of the databases.
Keep your thoughts, conclusions and responses to those that reply to you in one contiguous thread.
Keep the evolution of your issue in one place.
This site is an online user-to-user forum.
It exists for more than just you.
Once your discussions are finished, others are going to read them and (hopefully) learn from them so that they don't even need to post a new thread of their own.

Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.

Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.
I have had to erase my disk since then with trouble with Apple Store not recognising my machine and the reload from Time Machine has given complications . Can you please cancel my trial and return my Trial money.

If you paid for what you used then it was not a trial.
Look thru the following links and use the chat option if required for your situation:
Cancel your membership or subscription | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
https://forums.adobe.com/thread/1703848
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

How to find out the reason for blocking locks?

PB Application try to create data in ASE 12.5. With this operation, there are sql, sp, trigger involved. Most of the it is okay. With lock of sleeping or sync sleeping lock. User wait for a short time to get the result.
but some time, there are blocking lock.
If spid for the app is 1. then looks like this app also generate another spid, say it is 2. and 2 is blocking by 1. spid 1 holding lock!
then all user is frozen because of spid 1 holding lock!!! How to figure it out the reason for blocking locks?

Thanks, Mark. Yes, sp_lock, sp_who, ... are common tool I used.
I found out one case like:
I have a SP which call a View for data.
When I run this SP, suppose the sipd is 1. then it will create another spid 2 because of access view and it gone very quick. This cause spid 1 block spid 2 within a short time.
If the are many user run the app, the app will be frozen and everyone is waiting. Finally it release, no dead lock, but the performance is not acceptable.
That why I have this question.

Setting the "reasons" for signing in Acrobat XI Pro?

Similar Messages

Maybe you are looking for