Setting the time automatically, or manually yet still gives wrong time.

Ever since I've updated my 5c, the time keeps messing around. It's never the right time. I've tried manual and also set it automatically. It keeps delaying in time and gives wrong hour/minutes. I cannot set the alarm or do anything because the time is just wrong. I don't have a problem with my other apple devices regarding the new software update, it's just with this phone.

Hello Basilsami,
It sounds like your phone is not keeping the correct time and date, either when set to automatic, or manual. I recommend these troubleshooting steps from the article named:
iOS: Troubleshooting issues with date and time
http://support.apple.com/kb/ts3920
Follow these steps. Test after each step to see if the issue is resolved.
Ensure that the version of iOS on your device is up to date.
If the option to enable date and time automatically is available, turn it on. Tap Settings > General > Date & Time.
Ensure that your time zone is set up correctly. Tap Settings > General > Date & Time > Time Zone.
If the incorrect date, time, or time zone is being set up automatically on the device, please notify your cellular provider. In the meantime, tap General > Date & Time and turn off Set Automatically. Then set the appropriate time and time zone manually.
Note: The option to set automatically might not be available on all carriers in all countries.
Additional Information
Note: If you find that your device's time is incorrect after you sync with your computer, your computer's time may be incorrect. Verify the computer's time in System Preferences > Date & Time (you may want to select the checkbox to set the computer's date and time automatically).
Thank you for using Apple Support Communities.
All the very best,
Sterling

Similar Messages

  • My iphone 5 clock is not working properly.  I've tried to reset it, and update the clock automatically and manually, and the time is still off.  My alarms aren't working because of this, and I need my phone to work properly.

    My iphone 5 clock is not working properly.  I've tried to reset it, and update the clock automatically and manually, and the time is still off.  My alarms aren't working because of this, and I need my phone to work properly.

    Automatic time is a function of your Wireless carrier.  Your post indicates that your iPhone (5 or 5c) is running iOS 7.0.6.  The current version is 7.1.1.  You might try updating your device to the current iOS version.
    HTH

  • Set the margin automatically in a landscape report

    How can I set the margin automatically in a landscape report without manual setting in page setup before printing the report in oracle report6?

    How can I set the PRINT margins at design time in report builder 6?

  • How do I set the screen zoom, so that it doesnt change each time I open Firefox. Because I see the webpages in smaller print, and I want them larger , without having to re zoom each time I open Firefox.

    I need to know how to set the zoom option under "View" Tab, shere I dont have to re zoom each time I open Firefox. I have a wide screen monitor and generally, when viewing webpages, the web content on any page is confined to center of the page, and I was wondering if there was anyway to permanently set the zoom preferences without having to change them each time i open a webpage.
    IE 8 and 9 has a feature to set the magnification and i set mine to 150% which works perfectly for me. I wonder if Firefox has a similar feature.

    TonyE
    Thanks a lot. I downloaded the Default FullZoom Level add-on. My problem is now a history. thanks a million

  • Is there any free app to change the wallpaper automatically with in a particular span of time....if its there it would be great

    is there any free app to change the wallpaper automatically with in a particular span of time....if its there it would be great

    "Is there a tool, or something that I can use to modify the speed of a clip by dragging the edge of the clip, or something of the sort?"
    You can do this in FCP7. Drag with the speed tool.

  • I already set the Main-Class:class parameter but still error... Help pls...

    I have an experimental project that starts with a main class called "mainConsole"
    I packed it using the NetBeans IDE 3.3.2 jar packager and also set the Main-Class: mainConsole parameter
    I still receive the error below when trying to execute the jar file.
    java.lang.NoClassDefFoundError: mainConsole
    Exception in thread "main"
    Can someone help me?
    Thanks in advance.

    Help me pleeeease!!

  • I am setting up a new iTunes account and do not have a credit card.  When I am setting the new account up it does NOT give me an option of "none" in lieu of an actual credit card. What do I do?

    I am setting up a new iTunes account and do not have a credit card.  When I am setting the new account up it does NOT give me an option of "none" in lieu of an actual credit card. What do I do?

    How did you create it ? There are instructions on this page for creating a new account (the instructions won't work with existing existing account) without giving credt card details : http://support.apple.com/kb/HT2534
    e.g. if currently logged into an account then log of it, then find a free app in the store, click on its free 'price', and you should then be able to create a new account during the 'buying' process and get 'none' as an option on the payments screen

  • JSP, Data Web Bean, BC4J: Setting the where clause of a View Object at run time

    Hi,
    I am trying to develop a data web bean in which the where clause of a View Object will be set at run time and the results of the query then displayed.
    My BC4J components are located in one project while the coding for the data web bean is in another project. I used the following code bu t it does not work. Could you please let me know what I am doing wrong?
    public void populateOSTable(int P_EmpId)
    String m_whereString = "EmpView.EMP_ID = " + P_EmpId;
    String m_OrderBy = "EmpView.EMP_NAME";
    oracle.jbo.ApplicationModule appModule = null;
    ViewObject vo = appModule.findApplicationModule("EMPBC.EMPAppModule").findViewObject("EMPBC.EMPView");
    vo.setWhereClause(m_whereString);
    vo.setOrderByClause(m_OrderBy);
    vo.executeQuery();
    vo.next();
    String empName numAttrs = vo.getAttribute(EmpName);
    System.out.println(empName);
    Thanks.

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by JDev Team (Laura):
    Here is how I have usually done mine:
    1. In the JSP, use a RowsetNavigator bean to set the where clause and execute the query.
    2. Use a custom web bean to process the results of the query (print to HTML).
    for example:
    <jsp:useBean class="oracle.jbo.html.databeans.RowsetNavigator" id="rsn" scope="request" >
    <%
    // get the parameter from the find form
    String p = request.getParameter("p");
    String s = request.getParameter("s");
    // store the information for reference later
    session.putValue("p", p);
    session.putValue("s", s);
    // initialize the app module and view object
    rsn.initialize(application,session, request,response,out,"wt_bc_WT_bcModule.wtjoinView");
    // set the where clause string
    String theclause = "presname = '" + p + "' AND slideno=" + s;
    // set the where clause for the VO
    rsn.getRowSet().getViewObject().setWhereClause(theclause);
    rsn.getRowSet().getViewObject().executeQuery();
    rsn.getRowSet().first();
    %>
    </jsp:useBean>
    <jsp:useBean class="wt_bc.walkthruBean" id="wtb" scope="request" >
    <%
    // initialize the app module and VO
    wtb.initialize(application,session, request,response,out,"wt_bc_WT_bcModule.wtjoinView");
    wtb.render();
    %>
    In this case, the render method of my custom web bean mostly gets some session variables, and prints various content depending on the session variable values.
    Hope this helps.
    </jsp:useBean><HR></BLOCKQUOTE>
    Laura can you give the code of your walkthru bean? i wna't to initialize a viewobject, set the where clause and give that viewobject back to initialize my navigatorbar.
    Nathalie
    null

  • How do you set the size / bounds of a waveform chart at run time?

    I have a plot area that I would like to fill with as many waveform charts as the user specifies (at run time). The "bounds" property is read only and I haven't noticed an additional "size" property for a waveform chart as there is for a button. Is there a way to set the size of a waveform chart at run time, and if not, why not? (Labview 6.1)

    Look at it a little more carefully, I suspect that your assumption is only half wrong. The property does only resize the plot area--LV resizes the frame to fit the resized plot on it's own.
    You'll need to bear this in mind when you're figuring-out what size to set the property to.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How do I set the Shutter Speed in Manual Mode on my EOS 70D

    I recently was forced to upgrade to a Canon 70D after my 50D died from a fall.  I am not happy with the ease of setting the Shutter speed while in Manual mode.  The only way I can currently set the shutter speed while in Manual mode, is to go to the info screen and set the shutter speed with the touch screen.  The manual states that I should be able to set the Shutter speed with the Main Dial, behind the shutter release. ( which is how it was on the 50D).  I can control the Aperture with the quick control dial.  The Function Lock button is off.
    I am sure this is do to some setting I have wrong, that is not allowing me to fix this issue, but I cant figure out what it could be after hours on the net and in the manual.  I would greatly appreciate it if someone could help me with this issue.
    Thanks
    Gene

    Another possible solution is to use a battery grip on your 70D and see if the dial on the grip will change the shutter speed.
    There are some discussions about this problem on some earlier models Canon DSLR. Check it out.
    http://www.dpreview.com/forums/thread/2638326

  • How to set the servlet context path manually in Tomcat web server.

    I tested some servlets by putting them in the folder , which the tomcats examples application uses (ie Tomcat 4.1\webapps\examples\WEB-INF\classes\) and it appeared to be working fine.
    I was calling the servlet like this : http://localhost:2006/examples/servlet/TestServlet
    But when I installed my own WAR file in the server , the servlet is not working now. now the new location of my servlets is : Tomcat 4.1\webapps\MyApp\WEB-INF\classes\
    and I'm trying to call the servlet like this : http://localhost:2006/MyApp/servlet/TestServlet
    The error , what i'm getting is :
    description :The requested resource (/MyApp/servlet/TestServlet) is not available.
    Some body please tell where I'm making the mistake ? I believe this may have something to do with the servlet context path setting. If anybody has any idea , how to set the path..will be much appreciated.

    Thanx for your reply , at first I was not using any web.xml(since not mandatory) but even after using the web.xml file the error is coming . Please have a look into the contents of the web.xml file and let me know if you find any problem...
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
    <servlet>
    <servlet-name>TestServlet</servlet-name>
    <servlet-class>TestServlet</servlet-class>
    </servlet>
    </web-app>
    one more thing I would like to tell you here. I was just looking into the configuration of Iplanet web server..I found that , there are options to set the servlet container path (like : - Prefix: /servlet
    Servlet Directory: /ecomm/iplanet/nes60/product/docs/container )
    so from here I came to know that "container " is the folder where we should put our servlets and it has URI as "servlet" but yet I'm not able to find any option in the Tomcat Web server to set the servlet container to any different directory.
    If you have any idea please let me know.

  • Can i set the ipod touch to ask for a password every time i enter itunes to download music/games etc

    my daughter has a new ipod touch and i dont want her to download music/games/apps etc without the authorisation from me. is there any way to set it up so she will have to give me the ipod to type in a password before download anything?
    thanks in advance for any advice

    Just scroll to the bottom of a screen in iTunes and log out of your iTunes account. She will be asked for your iTunes username and password if she tries to get anything--free or paid.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Adding events in my phone gives wrong time on my computer.

    when I add an event to calendar in my iphone it pushes to ical in my computer an 1hr. later and when I put an event into my ical on my computer it pushes to my iphone an 1hr earlier. any help, my computer's clock is set to my time zone and my iphone shows the correct time also.

    I have the time zone set to central time zone on the computer, there is no option for DST. on the iphone it is set for Automatic date & time if I turn that off I have it set for central time zone. I did turn on the Time Zone Support in ical preferences and the events i put in the phone are now pushing over to ical on the computer correctly, but any calendar events i put into ical on the computer is pushing to the iphone 1hr behind. tried to take the set auto time off on the iphone and use central time zone setting the time manually but did not do anything.

  • Premiere Pro CC 2014 gives wrong time code from clip

    Premiere CC 2014 is giving me inaccurate TC. When I bring in a  59.94 Non Drop frame clip the into Premiere,  the TC is wrong. The TC in QuickTime  start frame reads: 15:32:56:00. When I bring it into Premiere, the TC start reads: 15:31:04:08. I have pre set the project and sequence settings to the correct parameters. And, I have also tried bringing the clip in without setting parameters and letting the clip drive parameters once I bring it in to sequence timeline. Regardless, of how I set the parameters, the TC does not read correctly.
    The TC reads correctly in FCP 7.
    The TC reads incorrectly in AE and Prelude as well. However,  when I look at the metadata in Prelude, there is line for "alternate TC". This line sees the correct  TC as 15:32:56:00  However, in the prelude sequence The TC reads incorrectly.
    This is pretty time sensitive.
    Thanks,

    In addition, when I interpret the footage to 30fps, the TC is correct. This is quite odd.

  • Can I get the applications to close when the profile automatically logs out due to parental control time limits?

    When time limit runs out on profiles set up for kids, all programs they are running remain open in the background even though their profile logs out.  It causes other profiles to operate slowly.  I have to log back into their profiles and manually close everything.  Is there an option to have those programs force quit when their time runs out?

    Hi - it still did not contain a precise response to my problem. But then I wandered around some more in the Tools option and found "always show the tab bar". I unchecked that, and it seems that for now all the tabs are gone. Shall have to see if they return on restarting or rebooting. If so, will post back. Thanks.

Maybe you are looking for