Setting the time in CIMC
Newbie question.. but how do I set the time in CIMC?
What type of server do you have?
Is it a c-series server?
To get into the bios you will have to reboot your server, and preset F2 when a little bit after you see the cisco logo.
Similar Messages
-
How do you set the time period on IMAP email accounts (razr maxx)
Hi Guys -
Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
Your help is appreciated!
Best Wishes for the Holiday Season.
-RichHey Rich. Once in 'settings,' there should be a "days to sync' under the 'data usage' section. You don't have that?
-
Can't set the time on the 6500 Slide
I just bought a 6500 slide and can't do one of the most basic things - set the time!
I have gone to auto-update but it is shows the wrong time.
At the time I purchased the handset the sales assistant turned the phone on to check if my sim card was working but he may have saved the incorrect date and time.
I have managed to save the correct date but can't for the life of me now save the correct time.
Can anyone help?
So simple but yet I can't figure it out.
Thanks.Hi racheljc,
Try this:
Menu
Settings
Time and date
Time
From there, you should be able to change the time.
I hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left. -
How do I set the time in icloud mail?
I have tried to set the time zone in my account. It show CST, but is 2hours behind time and I cannot get it to change.
Hi...
On a Mac for the time zone, open System Preferences > Date & Time > Time Zone
For an iOS device, tap Settings > General > Date & Time > Time Zone -
Setting the time on 1300 bridges
stupid question, how do you set the clock on the 1300 bridges, specifically the 1310?
kieran
two issues
one the Cisco AP's do not have a clock like your PC if you set the time manually when the AP loses power or reboots the time is reset to the default and you need to set it again.
te]wo the better solution is to designate a time server for the AP to syncronize to.
either method can be configured by clcking services on hte WEB interface and then select NTP or SNTP depending on you IOS version. then entering the time server IP address in the proper box or typing in hte proper date and time in the fields below, if you select the time server method the date and time will be filled in automaticaly once the time is syncronized.
HTH
Bill -
i'm using LV7.0 and what i need to do is to be able to set the time frame or range of a waveform chart programmatically before i start taking and plotting data. sometimes this window needs to be 30s wide and sometimes it needs to be 24 hrs wide. (in the first reference, i need the chart to fill up with 30s of historical data then the whole chart scrolls with each new data point). the data acquisition records data at a rate of once per second. i've tried to use the chart properties of XScale.offset, XScale.Range.Minimum and XScale.Range.Maximum but no matter what i do the time-stamp on the x-axis is always "00:00:00 PM" and "MM/DD/YYYY" even though values are seen being plotted on the right side of the chart as expected.
Attachments:
BX0265 ShelfLife DAQmx.vi 120 KBOkay, there seems to be some confusion here -- the X axis values are of type double, but they can be represented in the HH:MMS MMD:YYYY format if you want in which case it interprets the floating point as the number of seconds since 6pm Dec 31, 1903.
You can programmatically set this value using the XScale.Minimum and XScale.Maximum properties, but note that if you wire a waveform to the chart after setting these values the t0 parameter will override what you set using the property node for XScale.Minimum. If instead you leave the t0 parameter empty you can use the XScale.Offset property and wire the same value in that you wire to XScale.Minimum. Changing the amount you add to XScale.Minmum to obtain what you wire into XScale.Maximum will determine the time window size.
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me -
Timer works if I set the time before the current one
Hi,
I've got a block that is part of an actionListener that has 4 buttons, anyway I want the timer to execute something exactly at the time I set it.....but in the code that I have it also executes if i set the time before the current time
Here's the segmant:
private class ButtonResponder implements ActionListener
public void actionPerformed(ActionEvent event)
if (event.getSource() == exitButton)
System.exit(0);
if(event.getSource() == setButton)
int hour = Integer.parseInt(hours[hourComboBox.getSelectedIndex()]);
int min = Integer.parseInt(minutes[minuteComboBox.getSelectedIndex()]);
Calendar calendar = Calendar.getInstance();
calendar.set(Calendar.HOUR_OF_DAY, hour);
calendar.set(Calendar.MINUTE, min);
calendar.set(Calendar.SECOND, 0);
Date time = calendar.getTime();
timer = new java.util.Timer();
timer.schedule(new TimerTask()
public void run()
JOptionPane.showMessageDialog(null, "it is time");
, time, 5*1000);
if (event.getSource() == cancelButton)
timer.cancel();
}So if I put zeros in hours and minutes it will execute immediately....how can I make execute at the exact time (so that if the time now is 2:00 and I set it to 1:00 it only executes the next day??
Message was edited by:
OctavianBump the day if the time is less than current time.
Kaj -
How do you set the time for this forum??? Not in nerd pleas
how do you set the time for this forum?
There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.
-
Setting the time to UTC?
Okay my local time is 1 hour behind. My UTC time is correct. In /etc/rc.conf iI have "HARDWARECLOCK="UTC" but everywhere the time is displayed its in local time? Is there a way to set the time to UTC system wide?
Are you dualbooting windows btw? If you are, keep HARDWARECLOCK at localtime
-
Can I set the time ruler in the main window to minutes/seconds/milliseconds?
Is there a way to set the time ruler in the MAIN window to minutes/seconds/milliseconds?
It seems that the only ruler time display option is minutes/seconds/frames/subframes.
Or, failing that, is there a way to suppress the display of frames/subframes?
I have already figured out how to set the main ruler to time, and the LCD to minutes/seconds/milliseconds…it's just a matter of having that in the ruler as well.
Thanks.To my surprise that is not possible. Although, surprise...
You could put in a feature request here:
http://www.apple.com/feedback/logic-pro.html
and/or here:
http://www.logicprohelp.com/forum/viewforum.php?f=41 -
TS4020 how do i set the time my iCloud account to Sydney Australia
how do i set the time my iCloud account to Sydney
CheersHi...
On a Mac for the time zone, open System Preferences > Date & Time > Time Zone
For an iOS device, tap Settings > General > Date & Time > Time Zone -
Please help to set the time zone in a porper way
Dear Folks please help to set the time zone in a porper way
select sessiontimezone from dual;
Database: Oracle 11.2.0.2
Operating system: AIX 5.3
SESSIONTIMEZONE
+00:00
SQL> select systimestamp from dual;
SYSTIMESTAMP
06-NOV-12 04.21.07.438426 AM +00:00
SQL> select dbtimezone from dual;
DBTIME
+00:00
SQL> Select DBMS_SCHEDULER.get_sys_time_zone_name from dual;
GET_SYS_TIME_ZONE_NAME
Asia/Kuala_Lumpur
By looking Doc ID: Note:149120.1 in Metalink:
ALTER DATABASE <my db name> SET TIME_ZONE = 'Asia/Kuala_Lumpur'
or
ALTER DATABASE <my db name> SET TIME_ZONE = '+08:00'
For reflecting the change I refreshed the db by shutdown and restart.
but still the returning no timezone value for user schema, please help how to set the time zone in a proper way?SQL> conn sys/sys as sysdba
Connected.
DBNAME
db
SQL> select u.name || '.' || o.name || '.' || c.name "Col TSLTZ"
2 from sys.obj$ o, sys.col$ c, sys.user$ u
3 where c.type# = 231
4 and o.obj# = c.obj#
5 and u.user# = o.owner#;
no rows selected
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> alter database set time_zone='Asia/Kuala_Lumpur';
Database altered.
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> startup force;
ORACLE instance started.
Total System Global Area 426852352 bytes
Fixed Size 1375060 bytes
Variable Size 260048044 bytes
Database Buffers 159383552 bytes
Redo Buffers 6045696 bytes
Database mounted.
Database opened.
SQL> select DBTIMEZONE from dual;
DBTIMEZONE
Asia/Kuala_LumpurRefer:
Re: how to check db time zone
Edited by: Ora on 5 Nov, 2012 11:36 PM -
Setting the time in iPod Classic
Hello,
I set the time in 24 h mode as this is normal in Germany. When changing the time, the screen still shows the American way in 12 h mode. How can I change this, too?
Best regards
rudi_ratlosHi Jochen,
Clock control will display only the System time but you can change it by defining the 'Time Zone' dropdown in 'Display' tab of Clock properties.
Regards
Basheer -
Which computer sets the time stamp of a shared variable?
Which computer sets the time stamp of a shared variable? The computer that hosts the variable or the computer writing the variable?
(This is important when the system clocks differ.)
Greetings,
shb
Solved!
Go to Solution.Good Question - I have only one use case which is similiar...
I have a cRIO which hosts a NSV library which is bound to a mirror library on the PC. The PC library
is set to log to a Citadel DB. When my cRIO RT software writes values to the NSV the timestamp is created
at the instant the write occurs using the RT system clock (which incidentally is sync'd to GPS time). This timestamp is preverved all
the way up to the PC and the Citadel DB. -
When I try to set the automatic time zone on my iPad wi-fi mini in Settings all I get is the "waiting" wheel constantly turning.
The only way to set the time is in the manual mode.
How to solve this problem?
Thanks!You must be connected to a good wifi network for it to reach an outside time server.
Maybe you are looking for
-
Geforce Nightmares - crash/lock-ups
Hi, I'll start this story from the beginning so you can see the full frustration of my problem. If you do not want to read the introduction skip straight past the line of **'s to the problem itself: I bought an MSI ge-force 4 TI 4600 a few weeks ago
-
Employee vendor expense vouchers finance
Hi All, We have 1500 employee vendor expense vouchers which we want to upload in sap through fast entry screen. These expense vouchers involve one GL account and 1500 employee vendor accounts. How it is possible to upload these data in sap through Fa
-
How do you move music from iTunes on a pc to ipad2
How do you move music from iTunes on a pc to an ipad2?
-
Key figures are not available when i performing LBWE action
Hi gurus, I am trying to load 2lis_02_hdr, 2lis_02_itm and 2lis_02_scl to infocube 0pur_c04. But whatever the key figures available in the cube its not appear in the R/3 side data Source.. but those keyfigures are available in LIS structure.. for t
-
Ok I am somewhat done with this code. Just some little editing. This is the problem. Write a program that reads in the average monthly rainfall for a city for each month of the year and then reads in the actual monthly rainfall for each of the previo